Re: [OSL | CCIE_Voice] CUC DTMF
Hi, The issue is resolved now. I had my speakers on and the DTMF tones were getting distorted i guess. Tricky one :) the first time you come across such things. wasted a good hour or two. Thanks, Radhesh On Fri, Apr 13, 2012 at 11:03 PM, Pablo Meneses pmenese...@gmail.com wrote: Do you have G.722 enabled? If so, disable it. Also, what happens if you call from an IP Phone? -Pablo Meneses. On Fri, Apr 13, 2012 at 11:08 AM, Radhesh Naik radheshn...@gmail.com wrote: Hi Pablo, Here is my incoming call. LAB PSTN Phone Dialing CUC Hunt pilot DID Number PSTN WAN Router HQ Gateway (H323) CUCM Hunt Pilot CTI Port CUC. I can hear the CUC opening greeting. Press * to sign in, the call now gets dropped. Within the cluster all is working well. Message button, Login, MWI Etc… Regards, Radhesh From: Pablo Meneses [mailto:pmenese...@gmail.com] Sent: Friday, April 13, 2012 9:51 PM To: Radhesh Naik Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] CUC DTMF From where to where are you calling? HQ to CUE or BR2 to CUE? Also what's the protocol of the incoming gateway? -Pablo Meneses On Fri, Apr 13, 2012 at 4:31 AM, Radhesh Naik radheshn...@gmail.com wrote: Hi All, Unity connection doesn’t seem to be recognizing DTMF tones from PSTN, below is my config. voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! voice class h323 1 h225 timeout setup 3 ! dial-peer voice 1 pots incoming called-number . direct-inward-dial port 0/0/0:23 ! dial-peer voice 5000 voip destination-pattern ^2123945...$ voice-class codec 1 voice-class h323 1 session target ipv4:10.10.210.11 dtmf-relay h245-alphanumeric no vad ! dial-peer voice 5001 voip preference 1 destination-pattern ^2123945...$ voice-class codec 1 voice-class h323 1 session target ipv4:10.10.210.10 incoming called-number . dtmf-relay h245-alphanumeric no vad ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bchan-number-order ascending isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] accounting for bw for moh for CAC and QoS
Hi folks I am wondering the approach taken by other folks on accounting for the bandwidth consumed by MoH. I believe that- - bandwidth used by multicast moh is NOT used for CAC (including RSVP) purposes - bandwidth used by unicast moh IS used for CAC - in either case, priority bandwidth (in LLQ policy) will have to take them into consideration - of course, when the multicast moh flows out of gateway flash, neither CAC nor QOS care, as it doesn't cross the WAN! As far as accounting for the [additional] bandwidth for moh, it would, of course, depend on the codec used for MoH versus codec used by the call. If same, OR moh is less than voice codec, I guess nothing more needs to be done. If the codec used by MoH is different and of higher bandwidth, then we will have to make sure that the priority bandwidth accounts for MoH. For example, if calls use g.729, but moh uses g.711, then, in addition to allowing for n calls, the priority bandwidth command has to also allow for the additional bandwidth as follows- multicast moh -- 1 x g711 badwidth + n-1 x g.729 bandwidth unicast moh -n x g.711 bandwidth Is the above correct? Also, is it recommended that we do the above regardless of explicit requirement to account for moh bw. Finally, as for codec for MoH, it would seem simpler to make the moh codec SAME as voice-class codec, again, unless otherwise specified. Any thoughts/comments? thanks, /Baktha ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] viazone GK - something missing
all, can someone point me to the missing config for my viazone GK? I'm sure it must be some detail I'm overlooking... can't seem to find the reason why the GK is not able to find the IPIPgw that is registered in the viazone IPIPzone thx!! Juan gatekeeper zone local SEA ccie.com 177.1.254.1 outvia IPIPzone zone local AMS ccie.com outvia IPIPzone zone local IPIPzone ccievoice.com no zone subnet AMS default enable zone subnet AMS 177.1.254.3/32 enable no zone subnet AMS 177.1.10.10/32 enable no zone subnet AMS 177.1.10.20/32 enable zone subnet AMS 177.3.11.0/24 enable zone prefix SEA 1* gw-priority 10 SEA-CUCM-GW_2 zone prefix SEA 2* gw-priority 10 SEA-CUCM-GW_2 zone prefix AMS 3* bandwidth interzone default 48 bandwidth session default 16 no shutdown CorpHQ#sh gatekeeper end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 177.1.11.1 1720 177.1.11.1 64510 *IPIPzone* H323-GW H323-ID: *IPIPgw *Voice Capacity Max.= Avail.= Current.= 0 177.1.10.10 1720 177.1.10.10 32952 SEA VOIP-GW H323-ID: SEA-CUCM-GW_1 Voice Capacity Max.= Avail.= Current.= 0 177.1.10.20 1720 177.1.10.20 33095 SEA VOIP-GW H323-ID: SEA-CUCM-GW_2 Voice Capacity Max.= 1 Avail.= 1 Current.= 0 177.1.254.3 1720 177.1.254.3 51010 AMS H323-GW H323-ID: AMS-CME-GW Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 4 CorpHQ#sh gatekeeper gw-type-prefix GATEWAY TYPE PREFIX TABLE = Prefix: 225#* Zone AMS master gateway list: 177.1.254.3:1720 AMS-CME-GW Prefix: 115#* Zone SEA master gateway list: 177.1.10.20:1720 SEA-CUCM-GW_2 177.1.10.10:1720 SEA-CUCM-GW_1 Zone SEA prefix 2* priority gateway list(s): Priority 10: 177.1.10.20:1720 SEA-CUCM-GW_2 Priority 5: 177.1.10.10:1720 SEA-CUCM-GW_1 Zone SEA prefix 1* priority gateway list(s): Priority 10: 177.1.10.20:1720 SEA-CUCM-GW_2 Priority 5: 177.1.10.10:1720 SEA-CUCM-GW_1 Dialpeers: dial-peer voice 90 voip *(calls to SEA UCM)* destination-pattern 115#[12]...$ session target ras incoming called-number 225#3... dtmf-relay h245-alphanumeric no vad dial-peer voice 91 voip *(calls to AMS CME) * destination-pattern 225#3...$ session target ras incoming called-number 115# dtmf-relay h245-alphanumeric no vad BUT : CorpHQ# ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup ////GK/gk_rassrv_arq: arqp=0x491BC938,crv=0x22, answerCall=0 ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC //FFA1735A80B9/FFA1735A80BB/GK/gk_dns_query: No Name servers //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo: (115#1001) Matched tech-prefix 115# //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo: (115#1001) Matched zone prefix 1 and remainder 001 ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x4928DB2C //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is AMS, and z_invianamelen=0 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x480A5050 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is SEA, and z_outvianamelen=8 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone and z_outvianamep=IPIPzone //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: *Received ARQ for a zone (SEA) that has an outviazone (IPIPzone) specified. Pick an IP-IP gateway in that viazone. *////GK/gk_gw_select_ipipgw_random: zonep: 0x4921EC04, tpp: 0x48FB789C, current_endpt: 0 ////GK/gk_gw_select_ipipgw_random: Gateway selection will start at the top of the linked list. use_count=0, current_endpt=0 ////GK/gk_gw_select_ipipgw_random: qelemp=0x0, loop_count=0 ////GK/gk_gw_select_ipipgw_random: Could not find an IPIPGW. CorpHQ# //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo(115#1001): *Viazone gateway selection failed for zone IPIPzone *//FFA1735A80B9/FFA1735A80BB/GK/gk_rassrv_sep_arq: rassrv_get_addrinfo() failed (return code = 0x805) CorpHQ# ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] viazone GK - something missing
Don't you need a technology prefix match, even for a via-zone? Your CUBE isn't registering a tech-prefix and you don't have a default tech-prefix set. On Sat, Apr 14, 2012 at 9:27 PM, Juan Lopez lopez.hernandez.j...@gmail.comwrote: all, can someone point me to the missing config for my viazone GK? I'm sure it must be some detail I'm overlooking... can't seem to find the reason why the GK is not able to find the IPIPgw that is registered in the viazone IPIPzone thx!! Juan gatekeeper zone local SEA ccie.com 177.1.254.1 outvia IPIPzone zone local AMS ccie.com outvia IPIPzone zone local IPIPzone ccievoice.com no zone subnet AMS default enable zone subnet AMS 177.1.254.3/32 enable no zone subnet AMS 177.1.10.10/32 enable no zone subnet AMS 177.1.10.20/32 enable zone subnet AMS 177.3.11.0/24 enable zone prefix SEA 1* gw-priority 10 SEA-CUCM-GW_2 zone prefix SEA 2* gw-priority 10 SEA-CUCM-GW_2 zone prefix AMS 3* bandwidth interzone default 48 bandwidth session default 16 no shutdown CorpHQ#sh gatekeeper end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 177.1.11.1 1720 177.1.11.1 64510 *IPIPzone* H323-GW H323-ID: *IPIPgw *Voice Capacity Max.= Avail.= Current.= 0 177.1.10.10 1720 177.1.10.10 32952 SEA VOIP-GW H323-ID: SEA-CUCM-GW_1 Voice Capacity Max.= Avail.= Current.= 0 177.1.10.20 1720 177.1.10.20 33095 SEA VOIP-GW H323-ID: SEA-CUCM-GW_2 Voice Capacity Max.= 1 Avail.= 1 Current.= 0 177.1.254.3 1720 177.1.254.3 51010 AMS H323-GW H323-ID: AMS-CME-GW Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 4 CorpHQ#sh gatekeeper gw-type-prefix GATEWAY TYPE PREFIX TABLE = Prefix: 225#* Zone AMS master gateway list: 177.1.254.3:1720 AMS-CME-GW Prefix: 115#* Zone SEA master gateway list: 177.1.10.20:1720 SEA-CUCM-GW_2 177.1.10.10:1720 SEA-CUCM-GW_1 Zone SEA prefix 2* priority gateway list(s): Priority 10: 177.1.10.20:1720 SEA-CUCM-GW_2 Priority 5: 177.1.10.10:1720 SEA-CUCM-GW_1 Zone SEA prefix 1* priority gateway list(s): Priority 10: 177.1.10.20:1720 SEA-CUCM-GW_2 Priority 5: 177.1.10.10:1720 SEA-CUCM-GW_1 Dialpeers: dial-peer voice 90 voip *(calls to SEA UCM)* destination-pattern 115#[12]...$ session target ras incoming called-number 225#3... dtmf-relay h245-alphanumeric no vad dial-peer voice 91 voip *(calls to AMS CME) * destination-pattern 225#3...$ session target ras incoming called-number 115# dtmf-relay h245-alphanumeric no vad BUT : CorpHQ# ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup ////GK/gk_rassrv_arq: arqp=0x491BC938,crv=0x22, answerCall=0 ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC //FFA1735A80B9/FFA1735A80BB/GK/gk_dns_query: No Name servers //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo: (115#1001) Matched tech-prefix 115# //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo: (115#1001) Matched zone prefix 1 and remainder 001 ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x4928DB2C //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is AMS, and z_invianamelen=0 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x480A5050 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is SEA, and z_outvianamelen=8 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone and z_outvianamep=IPIPzone //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: *Received ARQ for a zone (SEA) that has an outviazone (IPIPzone) specified. Pick an IP-IP gateway in that viazone. *////GK/gk_gw_select_ipipgw_random: zonep: 0x4921EC04, tpp: 0x48FB789C, current_endpt: 0 ////GK/gk_gw_select_ipipgw_random: Gateway selection will start at the top of the linked list. use_count=0, current_endpt=0 ////GK/gk_gw_select_ipipgw_random: qelemp=0x0, loop_count=0 ////GK/gk_gw_select_ipipgw_random: Could not find an IPIPGW. CorpHQ# //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo(115#1001): *Viazone gateway selection failed for zone IPIPzone *//FFA1735A80B9/FFA1735A80BB/GK/gk_rassrv_sep_arq: rassrv_get_addrinfo() failed (return code = 0x805) CorpHQ# ___ For more information regarding industry
[OSL | CCIE_Voice] Multi MOH not working..
I'm not sure what I'm missing, its working fine on my mgcp gw... HQ-RTR# *Apr 15 02:52:00.995: %SYS-5-CONFIG_I: Configured from console by console HQ-RTR# *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.111: moh_process_ccb: dstadr 0.0.0.0, callid 22, port 0, codec 65535, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.151: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.151: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.039: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now connected to 911 N/A HQ-RTR# *Apr 15 02:52:04.047: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.051: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:04.051: moh_update_rtp: callID 21 dstCallID 22 HQ-RTR# interface Loopback0 ip address 10.10.110.1 255.255.255.255 ip pim dense-mode h323-gateway voip interface h323-gateway voip id VIA ipaddr 10.10.110.1 1719 h323-gateway voip h323-id HQ-RTR interface FastEthernet0/0.20 encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ip pim dense-mode h323-gateway voip bind srcaddr 10.10.200.3 ip multicast-routing ccm-manager music-on-hold telephony-service sdspfarm units 5 sdspfarm transcode sessions 4 sdspfarm tag 1 HQXCODER max-ephones 1 max-dn 1 ip source-address 10.10.200.3 port 2000 max-conferences 8 gain -6 moh flash:/music-on-hold.au multicast moh 239.1.1.1 port 16384 route 10.10.110.1 10.10.200.3 transfer-system full-consult create cnf-files version-stamp Jan 01 2002 00:00:00 HQ-RTR# -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] viazone GK - something missing
thx Kevin, but I don't think the cube needs to register with a tech-prefix in the viazone - cfr p8-40 in the SRND. I just tried registering the cube with a tech-prefix, and defined that tech-prefix as default tech-prefix in the GK - to make sure - but: no, that does not help Op 14 april 2012 23:02 schreef Kevin Spicer ke...@kevinspicer.co.uk het volgende: Don't you need a technology prefix match, even for a via-zone? Your CUBE isn't registering a tech-prefix and you don't have a default tech-prefix set. On Sat, Apr 14, 2012 at 9:27 PM, Juan Lopez lopez.hernandez.j...@gmail.com wrote: all, can someone point me to the missing config for my viazone GK? I'm sure it must be some detail I'm overlooking... can't seem to find the reason why the GK is not able to find the IPIPgw that is registered in the viazone IPIPzone thx!! Juan gatekeeper zone local SEA ccie.com 177.1.254.1 outvia IPIPzone zone local AMS ccie.com outvia IPIPzone zone local IPIPzone ccievoice.com no zone subnet AMS default enable zone subnet AMS 177.1.254.3/32 enable no zone subnet AMS 177.1.10.10/32 enable no zone subnet AMS 177.1.10.20/32 enable zone subnet AMS 177.3.11.0/24 enable zone prefix SEA 1* gw-priority 10 SEA-CUCM-GW_2 zone prefix SEA 2* gw-priority 10 SEA-CUCM-GW_2 zone prefix AMS 3* bandwidth interzone default 48 bandwidth session default 16 no shutdown CorpHQ#sh gatekeeper end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags --- - --- - - - 177.1.11.1 1720 177.1.11.1 64510 *IPIPzone* H323-GW H323-ID: *IPIPgw *Voice Capacity Max.= Avail.= Current.= 0 177.1.10.10 1720 177.1.10.10 32952 SEA VOIP-GW H323-ID: SEA-CUCM-GW_1 Voice Capacity Max.= Avail.= Current.= 0 177.1.10.20 1720 177.1.10.20 33095 SEA VOIP-GW H323-ID: SEA-CUCM-GW_2 Voice Capacity Max.= 1 Avail.= 1 Current.= 0 177.1.254.3 1720 177.1.254.3 51010 AMS H323-GW H323-ID: AMS-CME-GW Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 4 CorpHQ#sh gatekeeper gw-type-prefix GATEWAY TYPE PREFIX TABLE = Prefix: 225#* Zone AMS master gateway list: 177.1.254.3:1720 AMS-CME-GW Prefix: 115#* Zone SEA master gateway list: 177.1.10.20:1720 SEA-CUCM-GW_2 177.1.10.10:1720 SEA-CUCM-GW_1 Zone SEA prefix 2* priority gateway list(s): Priority 10: 177.1.10.20:1720 SEA-CUCM-GW_2 Priority 5: 177.1.10.10:1720 SEA-CUCM-GW_1 Zone SEA prefix 1* priority gateway list(s): Priority 10: 177.1.10.20:1720 SEA-CUCM-GW_2 Priority 5: 177.1.10.10:1720 SEA-CUCM-GW_1 Dialpeers: dial-peer voice 90 voip *(calls to SEA UCM)* destination-pattern 115#[12]...$ session target ras incoming called-number 225#3... dtmf-relay h245-alphanumeric no vad dial-peer voice 91 voip *(calls to AMS CME) * destination-pattern 225#3...$ session target ras incoming called-number 115# dtmf-relay h245-alphanumeric no vad BUT : CorpHQ# ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup ////GK/gk_rassrv_arq: arqp=0x491BC938,crv=0x22, answerCall=0 ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC //FFA1735A80B9/FFA1735A80BB/GK/gk_dns_query: No Name servers //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo: (115#1001) Matched tech-prefix 115# //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo: (115#1001) Matched zone prefix 1 and remainder 001 ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x4928DB2C //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is AMS, and z_invianamelen=0 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x480A5050 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is SEA, and z_outvianamelen=8 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone and z_outvianamep=IPIPzone //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: *Received ARQ for a zone (SEA) that has an outviazone (IPIPzone) specified. Pick an IP-IP gateway in that viazone. *////GK/gk_gw_select_ipipgw_random: zonep: 0x4921EC04, tpp: 0x48FB789C, current_endpt: 0 ////GK/gk_gw_select_ipipgw_random: Gateway selection will start at the top of the linked list. use_count=0, current_endpt=0 ////GK/gk_gw_select_ipipgw_random: qelemp=0x0, loop_count=0
Re: [OSL | CCIE_Voice] Multi MOH not working..
Makesure that your flash is having the moh file with correct name used. Apply the command ccm-manager multicast-moh In case still not working, we need to know who is the holdee ? Is it pstn or ip phone ? What the codec used. Post the output of show call active voice brief during hold. Regards, Mohammed Al Baqari Sent from my iPhone On Apr 15, 2012, at 1:44 AM, chase mergenthal cm3_...@hotmail.com wrote: I'm not sure what I'm missing, its working fine on my mgcp gw... HQ-RTR# *Apr 15 02:52:00.995: %SYS-5-CONFIG_I: Configured from console by console HQ-RTR# *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.111: moh_process_ccb: dstadr 0.0.0.0, callid 22, port 0, codec 65535, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.151: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.151: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.039: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now connected to 911 N/A HQ-RTR# *Apr 15 02:52:04.047: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.051: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:04.051: moh_update_rtp: callID 21 dstCallID 22 HQ-RTR# interface Loopback0 ip address 10.10.110.1 255.255.255.255 ip pim dense-mode h323-gateway voip interface h323-gateway voip id VIA ipaddr 10.10.110.1 1719 h323-gateway voip h323-id HQ-RTR interface FastEthernet0/0.20 encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ip pim dense-mode h323-gateway voip bind srcaddr 10.10.200.3 ip multicast-routing ccm-manager music-on-hold telephony-service sdspfarm units 5 sdspfarm transcode sessions 4 sdspfarm tag 1 HQXCODER max-ephones 1 max-dn 1 ip source-address 10.10.200.3 port 2000 max-conferences 8 gain -6 moh flash:/music-on-hold.au multicast moh 239.1.1.1 port 16384 route 10.10.110.1 10.10.200.3 transfer-system full-consult create cnf-files version-stamp Jan 01 2002 00:00:00 HQ-RTR# -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Multi MOH not working..
Its the PSTN phone: Telephony call-legs: 1 SIP call-legs: 0 H323 call-legs: 1 Call agent controlled call-legs: 0 SCCP call-legs: 0 Multicast call-legs: 0 Media call-legs: 0 Total call-legs: 2 27F8 : 7 817960ms.1 +840 pid:3555 Answer 3945002 active dur 00:00:05 tx:133/2554 rx:56/1120 IP 192.168.10.14:30260 SRTP: off rtt:0ms pl:1120/40ms lost:0/0/0 delay:70/70/70ms g729r8 TextRelay: off media inactive detected:n media contrl rcvd:n/a timestamp:n/a long duration call detected:n long duration call duration:n/a timestamp:n/a 27F8 : 8 818000ms.1 +800 pid:911 Originate 911 active dur 00:00:05 tx:56/1568 rx:133/2554 Tele 0/0/0:23 (8) [0/0/0.3] tx:6450/2590/0ms g729r8 noise:-68 acom:6 i/0:-66/-63 dBm -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? CC: ccie_voice@onlinestudylist.com From: baqari.voic...@gmail.com Subject: Re: [OSL | CCIE_Voice] Multi MOH not working.. Date: Sun, 15 Apr 2012 02:06:58 +0400 To: cm3_...@hotmail.com Makesure that your flash is having the moh file with correct name used. Apply the command ccm-manager multicast-moh In case still not working, we need to know who is the holdee ? Is it pstn or ip phone ? What the codec used. Post the output of show call active voice brief during hold. Regards,Mohammed Al Baqari Sent from my iPhone On Apr 15, 2012, at 1:44 AM, chase mergenthal cm3_...@hotmail.com wrote: I'm not sure what I'm missing, its working fine on my mgcp gw... HQ-RTR# *Apr 15 02:52:00.995: %SYS-5-CONFIG_I: Configured from console by console HQ-RTR# *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.111: moh_process_ccb: dstadr 0.0.0.0, callid 22, port 0, codec 65535, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.151: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.151: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.039: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now connected to 911 N/A HQ-RTR# *Apr 15 02:52:04.047: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.051: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:04.051: moh_update_rtp: callID 21 dstCallID 22 HQ-RTR# interface Loopback0 ip address 10.10.110.1 255.255.255.255 ip pim dense-mode h323-gateway voip interface h323-gateway voip id VIA ipaddr 10.10.110.1 1719 h323-gateway voip h323-id HQ-RTR interface FastEthernet0/0.20 encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ip pim dense-mode h323-gateway voip bind srcaddr 10.10.200.3 ip multicast-routing ccm-manager music-on-hold telephony-service sdspfarm units 5 sdspfarm transcode sessions 4 sdspfarm tag 1 HQXCODER max-ephones 1 max-dn 1 ip source-address 10.10.200.3 port 2000 max-conferences 8 gain -6 moh flash:/music-on-hold.au multicast moh 239.1.1.1 port 16384 route 10.10.110.1 10.10.200.3 transfer-system full-consult create cnf-files version-stamp Jan 01 2002 00:00:00 HQ-RTR# -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Multi MOH not working..
After fixing my inbound DP, so its g711u, I get CUCM's hold music... Stil trying to figure out why I don't get it from flash... Telephony call-legs: 1 SIP call-legs: 0 H323 call-legs: 1 Call agent controlled call-legs: 0 SCCP call-legs: 0 Multicast call-legs: 0 Media call-legs: 0 Total call-legs: 2 28F8 : 9 950830ms.1 +1010 pid:21011 Answer 3945002 active dur 00:00:48 tx:930/140520 rx:2423/387680 IP 10.10.210.10:24578 SRTP: off rtt:0ms pl:43150/160ms lost:0/1/8 delay:65/55/155ms g711ulaw TextRelay: off media inactive detected:n media contrl rcvd:n/a timestamp:n/a long duration call detected:n long duration call duration:n/a timestamp:n/a 28F8 : 10 950920ms.1 +910 pid:911 Originate 911 active dur 00:00:48 tx:2424/407232 rx:930/140520 Tele 0/0/0:23 (10) [0/0/0.3] tx:49290/17960/0ms g711ulaw noise:-71 acom:45 i/0:-66/-21 dBm -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? From: cm3_...@hotmail.com To: baqari.voic...@gmail.com Date: Sat, 14 Apr 2012 17:10:05 -0500 CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Multi MOH not working.. Its the PSTN phone: Telephony call-legs: 1 SIP call-legs: 0 H323 call-legs: 1 Call agent controlled call-legs: 0 SCCP call-legs: 0 Multicast call-legs: 0 Media call-legs: 0 Total call-legs: 2 27F8 : 7 817960ms.1 +840 pid:3555 Answer 3945002 active dur 00:00:05 tx:133/2554 rx:56/1120 IP 192.168.10.14:30260 SRTP: off rtt:0ms pl:1120/40ms lost:0/0/0 delay:70/70/70ms g729r8 TextRelay: off media inactive detected:n media contrl rcvd:n/a timestamp:n/a long duration call detected:n long duration call duration:n/a timestamp:n/a 27F8 : 8 818000ms.1 +800 pid:911 Originate 911 active dur 00:00:05 tx:56/1568 rx:133/2554 Tele 0/0/0:23 (8) [0/0/0.3] tx:6450/2590/0ms g729r8 noise:-68 acom:6 i/0:-66/-63 dBm -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? CC: ccie_voice@onlinestudylist.com From: baqari.voic...@gmail.com Subject: Re: [OSL | CCIE_Voice] Multi MOH not working.. Date: Sun, 15 Apr 2012 02:06:58 +0400 To: cm3_...@hotmail.com Makesure that your flash is having the moh file with correct name used. Apply the command ccm-manager multicast-moh In case still not working, we need to know who is the holdee ? Is it pstn or ip phone ? What the codec used. Post the output of show call active voice brief during hold. Regards,Mohammed Al Baqari Sent from my iPhone On Apr 15, 2012, at 1:44 AM, chase mergenthal cm3_...@hotmail.com wrote: I'm not sure what I'm missing, its working fine on my mgcp gw... HQ-RTR# *Apr 15 02:52:00.995: %SYS-5-CONFIG_I: Configured from console by console HQ-RTR# *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.111: moh_process_ccb: dstadr 0.0.0.0, callid 22, port 0, codec 65535, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.151: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.151: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.039: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now connected to 911 N/A HQ-RTR# *Apr 15 02:52:04.047: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.051: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:04.051: moh_update_rtp: callID 21 dstCallID 22 HQ-RTR# interface Loopback0 ip address 10.10.110.1 255.255.255.255 ip pim dense-mode h323-gateway voip interface h323-gateway voip id VIA ipaddr 10.10.110.1 1719 h323-gateway voip h323-id HQ-RTR interface FastEthernet0/0.20 encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ip pim dense-mode h323-gateway voip bind srcaddr 10.10.200.3 ip multicast-routing ccm-manager music-on-hold telephony-service sdspfarm units 5 sdspfarm transcode sessions 4 sdspfarm tag 1 HQXCODER max-ephones 1 max-dn 1 ip source-address 10.10.200.3 port 2000 max-conferences 8 gain -6 moh flash:/music-on-hold.au multicast moh 239.1.1.1 port 16384 route 10.10.110.1 10.10.200.3 transfer-system full-consult create cnf-files version-stamp Jan 01 2002 00:00:00 HQ-RTR# -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Multi MOH not working..
So it is working for local and remote IP phones but not PSTN, is that correct? On Sat, Apr 14, 2012 at 5:10 PM, chase mergenthal cm3_...@hotmail.comwrote: Its the PSTN phone: Telephony call-legs: 1 SIP call-legs: 0 H323 call-legs: 1 Call agent controlled call-legs: 0 SCCP call-legs: 0 Multicast call-legs: 0 Media call-legs: 0 Total call-legs: 2 27F8 : 7 817960ms.1 +840 pid:3555 Answer 3945002 active dur 00:00:05 tx:133/2554 rx:56/1120 IP 192.168.10.14:30260 SRTP: off rtt:0ms pl:1120/40ms lost:0/0/0 delay:70/70/70ms g729r8 TextRelay: off media inactive detected:n media contrl rcvd:n/a timestamp:n/a long duration call detected:n long duration call duration:n/a timestamp:n/a 27F8 : 8 818000ms.1 +800 pid:911 Originate 911 active dur 00:00:05 tx:56/1568 rx:133/2554 Tele 0/0/0:23 (8) [0/0/0.3] tx:6450/2590/0ms g729r8 noise:-68 acom:6 i/0:-66/-63 dBm -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? -- CC: ccie_voice@onlinestudylist.com From: baqari.voic...@gmail.com Subject: Re: [OSL | CCIE_Voice] Multi MOH not working.. Date: Sun, 15 Apr 2012 02:06:58 +0400 To: cm3_...@hotmail.com Makesure that your flash is having the moh file with correct name used. Apply the command ccm-manager multicast-moh In case still not working, we need to know who is the holdee ? Is it pstn or ip phone ? What the codec used. Post the output of show call active voice brief during hold. Regards, Mohammed Al Baqari Sent from my iPhone On Apr 15, 2012, at 1:44 AM, chase mergenthal cm3_...@hotmail.com wrote: I'm not sure what I'm missing, its working fine on my mgcp gw... HQ-RTR# *Apr 15 02:52:00.995: %SYS-5-CONFIG_I: Configured from console by console HQ-RTR# *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.111: moh_process_ccb: dstadr 0.0.0.0, callid 22, port 0, codec 65535, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.151: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.151: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.039: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now connected to 911 N/A HQ-RTR# *Apr 15 02:52:04.047: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.051: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:04.051: moh_update_rtp: callID 21 dstCallID 22 HQ-RTR# interface Loopback0 ip address 10.10.110.1 255.255.255.255 ip pim dense-mode h323-gateway voip interface h323-gateway voip id VIA ipaddr 10.10.110.1 1719 h323-gateway voip h323-id HQ-RTR interface FastEthernet0/0.20 encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ip pim dense-mode h323-gateway voip bind srcaddr 10.10.200.3 ip multicast-routing ccm-manager music-on-hold telephony-service sdspfarm units 5 sdspfarm transcode sessions 4 sdspfarm tag 1 HQXCODER max-ephones 1 max-dn 1 ip source-address 10.10.200.3 port 2000 max-conferences 8 gain -6 moh flash:/music-on-hold.au multicast moh 239.1.1.1 port 16384 route 10.10.110.1 10.10.200.3 transfer-system full-consult create cnf-files version-stamp Jan 01 2002 00:00:00 HQ-RTR# -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Multi MOH not working..
Try moh flash:music-on-hold.au instead of moh flash:/music-on-hold.au On Sat, Apr 14, 2012 at 10:44 PM, chase mergenthal cm3_...@hotmail.comwrote: I'm not sure what I'm missing, its working fine on my mgcp gw... HQ-RTR# *Apr 15 02:52:00.995: %SYS-5-CONFIG_I: Configured from console by console HQ-RTR# *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.111: moh_process_ccb: dstadr 0.0.0.0, callid 22, port 0, codec 65535, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.151: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.151: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.039: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now connected to 911 N/A HQ-RTR# *Apr 15 02:52:04.047: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.051: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:04.051: moh_update_rtp: callID 21 dstCallID 22 HQ-RTR# interface Loopback0 ip address 10.10.110.1 255.255.255.255 ip pim dense-mode h323-gateway voip interface h323-gateway voip id VIA ipaddr 10.10.110.1 1719 h323-gateway voip h323-id HQ-RTR interface FastEthernet0/0.20 encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ip pim dense-mode h323-gateway voip bind srcaddr 10.10.200.3 ip multicast-routing ccm-manager music-on-hold telephony-service sdspfarm units 5 sdspfarm transcode sessions 4 sdspfarm tag 1 HQXCODER max-ephones 1 max-dn 1 ip source-address 10.10.200.3 port 2000 max-conferences 8 gain -6 moh flash:/music-on-hold.au multicast moh 239.1.1.1 port 16384 route 10.10.110.1 10.10.200.3 transfer-system full-consult create cnf-files version-stamp Jan 01 2002 00:00:00 HQ-RTR# -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] viazone GK - something missing
Hi Juan, In your command zone local IPIPzone http://ccievoice.com/ ccievoice.com, the domain name is different from GK domain-name (ccie.com). Fix this and test. Regards, Mohammed Al Baqari From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Juan Lopez Sent: Sunday, April 15, 2012 1:46 AM To: Kevin Spicer Cc: CCIE Study Subject: Re: [OSL | CCIE_Voice] viazone GK - something missing thx Kevin, but I don't think the cube needs to register with a tech-prefix in the viazone - cfr p8-40 in the SRND. I just tried registering the cube with a tech-prefix, and defined that tech-prefix as default tech-prefix in the GK - to make sure - but: no, that does not help Op 14 april 2012 23:02 schreef Kevin Spicer ke...@kevinspicer.co.uk het volgende: Don't you need a technology prefix match, even for a via-zone? Your CUBE isn't registering a tech-prefix and you don't have a default tech-prefix set. On Sat, Apr 14, 2012 at 9:27 PM, Juan Lopez lopez.hernandez.j...@gmail.com wrote: all, can someone point me to the missing config for my viazone GK? I'm sure it must be some detail I'm overlooking... can't seem to find the reason why the GK is not able to find the IPIPgw that is registered in the viazone IPIPzone thx!! Juan gatekeeper zone local SEA ccie.com http://ccie.com/ 177.1.254.1 outvia IPIPzone zone local AMS ccie.com http://ccie.com/ outvia IPIPzone zone local IPIPzone ccievoice.com http://ccievoice.com/ no zone subnet AMS default enable zone subnet AMS 177.1.254.3/32 enable no zone subnet AMS 177.1.10.10/32 enable no zone subnet AMS 177.1.10.20/32 enable zone subnet AMS 177.3.11.0/24 enable zone prefix SEA 1* gw-priority 10 SEA-CUCM-GW_2 zone prefix SEA 2* gw-priority 10 SEA-CUCM-GW_2 zone prefix AMS 3* bandwidth interzone default 48 bandwidth session default 16 no shutdown CorpHQ#sh gatekeeper end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 177.1.11.1 1720 177.1.11.1 64510 IPIPzone H323-GW H323-ID: IPIPgw Voice Capacity Max.= Avail.= Current.= 0 177.1.10.10 1720 177.1.10.10 32952 SEA VOIP-GW H323-ID: SEA-CUCM-GW_1 Voice Capacity Max.= Avail.= Current.= 0 177.1.10.20 1720 177.1.10.20 33095 SEA VOIP-GW H323-ID: SEA-CUCM-GW_2 Voice Capacity Max.= 1 Avail.= 1 Current.= 0 177.1.254.3 1720 177.1.254.3 51010 AMS H323-GW H323-ID: AMS-CME-GW Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 4 CorpHQ#sh gatekeeper gw-type-prefix GATEWAY TYPE PREFIX TABLE = Prefix: 225#* Zone AMS master gateway list: 177.1.254.3:1720 http://177.1.254.3:1720/ AMS-CME-GW Prefix: 115#* Zone SEA master gateway list: 177.1.10.20:1720 http://177.1.10.20:1720/ SEA-CUCM-GW_2 177.1.10.10:1720 http://177.1.10.10:1720/ SEA-CUCM-GW_1 Zone SEA prefix 2* priority gateway list(s): Priority 10: 177.1.10.20:1720 http://177.1.10.20:1720/ SEA-CUCM-GW_2 Priority 5: 177.1.10.10:1720 http://177.1.10.10:1720/ SEA-CUCM-GW_1 Zone SEA prefix 1* priority gateway list(s): Priority 10: 177.1.10.20:1720 http://177.1.10.20:1720/ SEA-CUCM-GW_2 Priority 5: 177.1.10.10:1720 http://177.1.10.10:1720/ SEA-CUCM-GW_1 Dialpeers: dial-peer voice 90 voip (calls to SEA UCM) destination-pattern 115#[12]...$ session target ras incoming called-number 225#3... dtmf-relay h245-alphanumeric no vad dial-peer voice 91 voip (calls to AMS CME) destination-pattern 225#3...$ session target ras incoming called-number 115# dtmf-relay h245-alphanumeric no vad BUT : CorpHQ# ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup ////GK/gk_rassrv_arq: arqp=0x491BC938,crv=0x22, answerCall=0 ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC //FFA1735A80B9/FFA1735A80BB/GK/gk_dns_query: No Name servers //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo: (115#1001) Matched tech-prefix 115# //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo: (115#1001) Matched zone prefix 1 and remainder 001 ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x4928DB2C //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is AMS, and z_invianamelen=0 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x480A5050 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is SEA, and z_outvianamelen=8
Re: [OSL | CCIE_Voice] Multi MOH not working..
Ok, so I disabled the MTP on the H323 trunk but I'm must be loosing my mind... I am hearing both the MOH stock audio from CUCM, and the piano song in flash at the same time... like right on top of each other... -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sat, 14 Apr 2012 17:14:01 -0500 Subject: Re: [OSL | CCIE_Voice] Multi MOH not working.. From: whl...@gmail.com To: cm3_...@hotmail.com CC: baqari.voic...@gmail.com; ccie_voice@onlinestudylist.com So it is working for local and remote IP phones but not PSTN, is that correct? On Sat, Apr 14, 2012 at 5:10 PM, chase mergenthal cm3_...@hotmail.com wrote: Its the PSTN phone: Telephony call-legs: 1 SIP call-legs: 0 H323 call-legs: 1 Call agent controlled call-legs: 0 SCCP call-legs: 0 Multicast call-legs: 0 Media call-legs: 0 Total call-legs: 2 27F8 : 7 817960ms.1 +840 pid:3555 Answer 3945002 active dur 00:00:05 tx:133/2554 rx:56/1120 IP 192.168.10.14:30260 SRTP: off rtt:0ms pl:1120/40ms lost:0/0/0 delay:70/70/70ms g729r8 TextRelay: off media inactive detected:n media contrl rcvd:n/a timestamp:n/a long duration call detected:n long duration call duration:n/a timestamp:n/a 27F8 : 8 818000ms.1 +800 pid:911 Originate 911 active dur 00:00:05 tx:56/1568 rx:133/2554 Tele 0/0/0:23 (8) [0/0/0.3] tx:6450/2590/0ms g729r8 noise:-68 acom:6 i/0:-66/-63 dBm -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? CC: ccie_voice@onlinestudylist.com From: baqari.voic...@gmail.com Subject: Re: [OSL | CCIE_Voice] Multi MOH not working.. Date: Sun, 15 Apr 2012 02:06:58 +0400 To: cm3_...@hotmail.com Makesure that your flash is having the moh file with correct name used. Apply the command ccm-manager multicast-moh In case still not working, we need to know who is the holdee ? Is it pstn or ip phone ? What the codec used. Post the output of show call active voice brief during hold. Regards,Mohammed Al Baqari Sent from my iPhone On Apr 15, 2012, at 1:44 AM, chase mergenthal cm3_...@hotmail.com wrote: I'm not sure what I'm missing, its working fine on my mgcp gw... HQ-RTR# *Apr 15 02:52:00.995: %SYS-5-CONFIG_I: Configured from console by console HQ-RTR# *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.111: moh_process_ccb: dstadr 0.0.0.0, callid 22, port 0, codec 65535, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.151: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.151: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.039: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now connected to 911 N/A HQ-RTR# *Apr 15 02:52:04.047: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.051: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:04.051: moh_update_rtp: callID 21 dstCallID 22 HQ-RTR# interface Loopback0 ip address 10.10.110.1 255.255.255.255 ip pim dense-mode h323-gateway voip interface h323-gateway voip id VIA ipaddr 10.10.110.1 1719 h323-gateway voip h323-id HQ-RTR interface FastEthernet0/0.20 encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ip pim dense-mode h323-gateway voip bind srcaddr 10.10.200.3 ip multicast-routing ccm-manager music-on-hold telephony-service sdspfarm units 5 sdspfarm transcode sessions 4 sdspfarm tag 1 HQXCODER max-ephones 1 max-dn 1 ip source-address 10.10.200.3 port 2000 max-conferences 8 gain -6 moh flash:/music-on-hold.au multicast moh 239.1.1.1 port 16384 route 10.10.110.1 10.10.200.3 transfer-system full-consult create cnf-files version-stamp Jan 01 2002 00:00:00 HQ-RTR# -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] viazone GK - something missing
zone local SEA ccie.com 177.1.254.1 outvia IPIPzone zone local AMS ccie.com outvia IPIPzone zone local IPIPzone ccievoice.com On Sat, Apr 14, 2012 at 5:22 PM, Mohammed Al Baqari baqari.voic...@gmail.com wrote: Hi Juan, ** ** In your command zone local IPIPzone ccievoice.com, the domain name is different from GK domain-name (ccie.com). Fix this and test. Regards, Mohammed Al Baqari ** ** *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Juan Lopez *Sent:* Sunday, April 15, 2012 1:46 AM *To:* Kevin Spicer *Cc:* CCIE Study *Subject:* Re: [OSL | CCIE_Voice] viazone GK - something missing ** ** thx Kevin, but I don't think the cube needs to register with a tech-prefix in the viazone - cfr p8-40 in the SRND. I just tried registering the cube with a tech-prefix, and defined that tech-prefix as default tech-prefix in the GK - to make sure - but: no, that does not help Op 14 april 2012 23:02 schreef Kevin Spicer ke...@kevinspicer.co.uk het volgende: Don't you need a technology prefix match, even for a via-zone? Your CUBE isn't registering a tech-prefix and you don't have a default tech-prefix set. On Sat, Apr 14, 2012 at 9:27 PM, Juan Lopez lopez.hernandez.j...@gmail.com wrote: all, can someone point me to the missing config for my viazone GK? I'm sure it must be some detail I'm overlooking... can't seem to find the reason why the GK is not able to find the IPIPgw that is registered in the viazone IPIPzone thx!! Juan gatekeeper zone local SEA ccie.com 177.1.254.1 outvia IPIPzone zone local AMS ccie.com outvia IPIPzone zone local IPIPzone ccievoice.com no zone subnet AMS default enable zone subnet AMS 177.1.254.3/32 enable no zone subnet AMS 177.1.10.10/32 enable no zone subnet AMS 177.1.10.20/32 enable zone subnet AMS 177.3.11.0/24 enable zone prefix SEA 1* gw-priority 10 SEA-CUCM-GW_2 zone prefix SEA 2* gw-priority 10 SEA-CUCM-GW_2 zone prefix AMS 3* bandwidth interzone default 48 bandwidth session default 16 no shutdown CorpHQ#sh gatekeeper end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 177.1.11.1 1720 177.1.11.1 64510 *IPIPzone* H323-GW H323-ID: *IPIPgw *Voice Capacity Max.= Avail.= Current.= 0 177.1.10.10 1720 177.1.10.10 32952 SEA VOIP-GW H323-ID: SEA-CUCM-GW_1 Voice Capacity Max.= Avail.= Current.= 0 177.1.10.20 1720 177.1.10.20 33095 SEA VOIP-GW H323-ID: SEA-CUCM-GW_2 Voice Capacity Max.= 1 Avail.= 1 Current.= 0 177.1.254.3 1720 177.1.254.3 51010 AMS H323-GW H323-ID: AMS-CME-GW Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 4 CorpHQ#sh gatekeeper gw-type-prefix GATEWAY TYPE PREFIX TABLE = Prefix: 225#* Zone AMS master gateway list: 177.1.254.3:1720 AMS-CME-GW Prefix: 115#* Zone SEA master gateway list: 177.1.10.20:1720 SEA-CUCM-GW_2 177.1.10.10:1720 SEA-CUCM-GW_1 Zone SEA prefix 2* priority gateway list(s): Priority 10: 177.1.10.20:1720 SEA-CUCM-GW_2 Priority 5: 177.1.10.10:1720 SEA-CUCM-GW_1 Zone SEA prefix 1* priority gateway list(s): Priority 10: 177.1.10.20:1720 SEA-CUCM-GW_2 Priority 5: 177.1.10.10:1720 SEA-CUCM-GW_1 Dialpeers: dial-peer voice 90 voip *(calls to SEA UCM)* destination-pattern 115#[12]...$ session target ras incoming called-number 225#3... dtmf-relay h245-alphanumeric no vad dial-peer voice 91 voip *(calls to AMS CME) * destination-pattern 225#3...$ session target ras incoming called-number 115# dtmf-relay h245-alphanumeric no vad BUT : CorpHQ# ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup ////GK/gk_rassrv_arq: arqp=0x491BC938,crv=0x22, answerCall=0 ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC //FFA1735A80B9/FFA1735A80BB/GK/gk_dns_query: No Name servers //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo: (115#1001) Matched tech-prefix 115# //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo: (115#1001) Matched zone prefix 1 and remainder 001 ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x4928DB2C //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is AMS, and z_invianamelen=0
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 74, Issue 44
/rassrv_get_addrinfo: (115#1001) Matched zone prefix 1 and remainder 001 ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x4928DB2C //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is AMS, and z_invianamelen=0 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x480A5050 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: matched zone is SEA, and z_outvianamelen=8 //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone and z_outvianamep=IPIPzone //FFA1735A80B9/FFA1735A80BB/GK/rassrv_arq_select_viazone: *Received ARQ for a zone (SEA) that has an outviazone (IPIPzone) specified. Pick an IP-IP gateway in that viazone. *////GK/gk_gw_select_ipipgw_random: zonep: 0x4921EC04, tpp: 0x48FB789C, current_endpt: 0 ////GK/gk_gw_select_ipipgw_random: Gateway selection will start at the top of the linked list. use_count=0, current_endpt=0 ////GK/gk_gw_select_ipipgw_random: qelemp=0x0, loop_count=0 ////GK/gk_gw_select_ipipgw_random: Could not find an IPIPGW. CorpHQ# //FFA1735A80B9/FFA1735A80BB/GK/rassrv_get_addrinfo(115#1001): *Viazone gateway selection failed for zone IPIPzone *//FFA1735A80B9/FFA1735A80BB/GK/gk_rassrv_sep_arq: rassrv_get_addrinfo() failed (return code = 0x805) CorpHQ# ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120414/4d6a107c/attachment-0001.html -- Message: 2 Date: Sun, 15 Apr 2012 02:06:58 +0400 From: Mohd Baqari baqari.voic...@gmail.com To: chase mergenthal cm3_...@hotmail.com Cc: ccie voice ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Multi MOH not working.. Message-ID: f88d2907-5a2e-4cc2-a8bd-4c91ec9f8...@gmail.com Content-Type: text/plain; charset=utf-8 Makesure that your flash is having the moh file with correct name used. Apply the command ccm-manager multicast-moh In case still not working, we need to know who is the holdee ? Is it pstn or ip phone ? What the codec used. Post the output of show call active voice brief during hold. Regards, Mohammed Al Baqari Sent from my iPhone On Apr 15, 2012, at 1:44 AM, chase mergenthal cm3_...@hotmail.com wrote: I'm not sure what I'm missing, its working fine on my mgcp gw... HQ-RTR# *Apr 15 02:52:00.995: %SYS-5-CONFIG_I: Configured from console by console HQ-RTR# *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.111: moh_process_ccb: dstadr 0.0.0.0, callid 22, port 0, codec 65535, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.151: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.151: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.039: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now connected to 911 N/A HQ-RTR# *Apr 15 02:52:04.047: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.051: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:04.051: moh_update_rtp: callID 21 dstCallID 22 HQ-RTR# interface Loopback0 ip address 10.10.110.1 255.255.255.255 ip pim dense-mode h323-gateway voip interface h323-gateway voip id VIA ipaddr 10.10.110.1 1719 h323-gateway voip h323-id HQ-RTR interface FastEthernet0/0.20 encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ip pim dense-mode h323-gateway voip bind srcaddr 10.10.200.3 ip multicast-routing ccm-manager music-on-hold telephony-service sdspfarm units 5 sdspfarm transcode sessions 4 sdspfarm tag 1 HQXCODER max-ephones 1 max-dn 1 ip source-address 10.10.200.3 port 2000 max-conferences 8 gain -6 moh flash:/music-on-hold.au multicast moh 239.1.1.1 port 16384 route 10.10.110.1 10.10.200.3 transfer-system full-consult create cnf-files version-stamp Jan 01 2002 00:00:00 HQ-RTR# -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you?re still ahead.? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP