Re: [OSL | CCIE_Voice] Hardware Conferencing with different codecs
Hi, You're all good. Hardware conference bridge does the transcoding theirself. 2012/4/17 Ken Wyan kew...@gmail.com We configure HW conf bridge this way dspfarm profile 1 conference codec g711u codec g711a codec g729r8 codec g729ar8 codec g729br8 codec g729abr8 maximum sessions 4 associate application sccp no shut Is it possible for different phones (which use different codecs as per different region) to enter into a single conference using this conference bridge ? Does hardware conference bridge does internal transcoding by itself or do we need to configure another dspfarm profile for transcoding as well? Thank You ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX and Media Resources
Hi Chris, I would verify the following: 1) Region setting between HQ and Branch sites uses G.729. 2) All your CTI Route Points should show in HQ DP on the CM and the CCX. 3) The Media Resource (Xcoder) should be configured on the HQ router. 4) The codec selected on the CCX is G.711. 5) Your IP phones show in the correct Device Pool. Last but not the least, make sure that the CTI Route point you dial should also be in the HQ DP with an Xcoder in the MRGL of HQ DP. Let me know if all the above stands true. Regards Gurpreet On Tue, Apr 17, 2012 at 4:17 AM, Chris devsin2...@gmail.com wrote: My UCCX is in HQ device pool. The DP has MRGL allocated to with registered transcoder resources. However, when I try to dial from BR1/BR2. The call fails to connect. The SDI traces on the call manager show following messages: *04/17/2012 15:28:30.231 CCM|MediaManager(9)::disconnOnResourceAllocationFailure, ERROR disconnOnResourceAllocationFailure - fails to allocate MTP/XCoder,connCount=2|CLID::StandAloneClusterNID::10.10IP::10.10.100.14DEV::UCCX_5701LVL::ErrorMASK::0800 * Xcoder resource is configured as *Transcoding Oper State: ACTIVE - Cause Code: NONE* *Active Call Manager: * *10.10.100**.12, Port Number: 2000* *TCP Link Status: CONNECTED, Profile Identifier: 1* *Reported Max Streams: 6, Reported Max OOS Streams: 0* *Supported Codec: g711ulaw, Maximum Packetization Period: 30* *Supported Codec: g711alaw, Maximum Packetization Period: 30* *Supported Codec: g729ar8, Maximum Packetization Period: 60* *Supported Codec: g729abr8, Maximum Packetization Period: 60* *Supported Codec: g729r8, Maximum Packetization Period: 60* *Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30* *Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30* *Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30* * * *MTP Oper State: ACTIVE - Cause Code: NONE* *Active Call Manager: * *10.10.100**.12, Port Number: 2000* *TCP Link Status: CONNECTED, Profile Identifier: 3* *Reported Max Streams: 20, Reported Max OOS Streams: 0* *Supported Codec: pass-thru, Maximum Packetization Period: N/A* *Supported Codec: g729r8, Maximum Packetization Period: 60* *Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30* *Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30* *Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30* *RSVP : ENABLED* MRGL [image: Inline image 1] Can someone tell me what am I doing wrong. Thanks Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com image.png___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX and Media Resources
Yes. This is all true. I had double checked before my original post. But I did it again after seeing your response. Best Regards Thanks Chris On Tue, Apr 17, 2012 at 7:27 PM, Gurpreet Singh Kukreja tycoononway1...@gmail.com wrote: Hi Chris, I would verify the following: 1) Region setting between HQ and Branch sites uses G.729. 2) All your CTI Route Points should show in HQ DP on the CM and the CCX. 3) The Media Resource (Xcoder) should be configured on the HQ router. 4) The codec selected on the CCX is G.711. 5) Your IP phones show in the correct Device Pool. Last but not the least, make sure that the CTI Route point you dial should also be in the HQ DP with an Xcoder in the MRGL of HQ DP. Let me know if all the above stands true. Regards Gurpreet On Tue, Apr 17, 2012 at 4:17 AM, Chris devsin2...@gmail.com wrote: My UCCX is in HQ device pool. The DP has MRGL allocated to with registered transcoder resources. However, when I try to dial from BR1/BR2. The call fails to connect. The SDI traces on the call manager show following messages: *04/17/2012 15:28:30.231 CCM|MediaManager(9)::disconnOnResourceAllocationFailure, ERROR disconnOnResourceAllocationFailure - fails to allocate MTP/XCoder,connCount=2|CLID::StandAloneClusterNID::10.10IP::10.10.100.14DEV::UCCX_5701LVL::ErrorMASK::0800 * Xcoder resource is configured as *Transcoding Oper State: ACTIVE - Cause Code: NONE* *Active Call Manager: * *10.10.100**.12, Port Number: 2000* *TCP Link Status: CONNECTED, Profile Identifier: 1* *Reported Max Streams: 6, Reported Max OOS Streams: 0* *Supported Codec: g711ulaw, Maximum Packetization Period: 30* *Supported Codec: g711alaw, Maximum Packetization Period: 30* *Supported Codec: g729ar8, Maximum Packetization Period: 60* *Supported Codec: g729abr8, Maximum Packetization Period: 60* *Supported Codec: g729r8, Maximum Packetization Period: 60* *Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30* *Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30* *Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30* * * *MTP Oper State: ACTIVE - Cause Code: NONE* *Active Call Manager: * *10.10.100**.12, Port Number: 2000* *TCP Link Status: CONNECTED, Profile Identifier: 3* *Reported Max Streams: 20, Reported Max OOS Streams: 0* *Supported Codec: pass-thru, Maximum Packetization Period: N/A* *Supported Codec: g729r8, Maximum Packetization Period: 60* *Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30* *Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30* *Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30* *RSVP : ENABLED* MRGL [image: Inline image 1] Can someone tell me what am I doing wrong. Thanks Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com image.png___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX and Media Resources
- Have you checked by issuing debug sccp events on hq gw how SCCP works on during the call? - Also have you resetted all involved devices: xcoder, br phones, cti ports? - Hq xoder device is in the hq-xcoder MRG? Peter - Original Message - From: Chris devsin2...@gmail.com Date: Tuesday, April 17, 2012 12:02 pm Subject: Re: [OSL | CCIE_Voice] UCCX and Media Resources To: Gurpreet Singh Kukreja tycoononway1...@gmail.com Cc: ccie_voice@onlinestudylist.com Yes. This is all true. I had double checked before my original post. But I did it again after seeing your response. Best Regards Thanks Chris On Tue, Apr 17, 2012 at 7:27 PM, Gurpreet Singh Kukreja tycoononway1...@gmail.com wrote: Hi Chris, I would verify the following: 1) Region setting between HQ and Branch sites uses G.729. 2) All your CTI Route Points should show in HQ DP on the CM and the CCX. 3) The Media Resource (Xcoder) should be configured on the HQ router. 4) The codec selected on the CCX is G.711. 5) Your IP phones show in the correct Device Pool. Last but not the least, make sure that the CTI Route point you dial should also be in the HQ DP with an Xcoder in the MRGL of HQ DP. Let me know if all the above stands true. Regards Gurpreet On Tue, Apr 17, 2012 at 4:17 AM, Chris devsin2...@gmail.com wrote: My UCCX is in HQ device pool. The DP has MRGL allocated to with registered transcoder resources. However, when I try to dial from BR1/BR2. The call fails to connect. The SDI traces on the call manager show following messages: *04/17/2012 15:28:30.231 CCM|MediaManager(9)::disconnOnResourceAllocationFailure, ERROR disconnOnResourceAllocationFailure - fails to allocate MTP/XCoder,connCount=2|CLID::StandAloneClusterNID::10.10IP::10.10.100.14DEV::UCCX_5701LVL::ErrorMASK::0800 * Xcoder resource is configured as *Transcoding Oper State: ACTIVE - Cause Code: NONE* *Active Call Manager: * *10.10.100**.12, Port Number: 2000* *TCP Link Status: CONNECTED, Profile Identifier: 1* *Reported Max Streams: 6, Reported Max OOS Streams: 0* *Supported Codec: g711ulaw, Maximum Packetization Period: 30* *Supported Codec: g711alaw, Maximum Packetization Period: 30* *Supported Codec: g729ar8, Maximum Packetization Period: 60* *Supported Codec: g729abr8, Maximum Packetization Period: 60* *Supported Codec: g729r8, Maximum Packetization Period: 60* *Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30* *Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30* *Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30* * * *MTP Oper State: ACTIVE - Cause Code: NONE* *Active Call Manager: * *10.10.100**.12, Port Number: 2000* *TCP Link Status: CONNECTED, Profile Identifier: 3* *Reported Max Streams: 20, Reported Max OOS Streams: 0* *Supported Codec: pass-thru, Maximum Packetization Period: N/A* *Supported Codec: g729r8, Maximum Packetization Period: 60* *Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30* *Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30* *Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30* *RSVP : ENABLED* MRGL [image: Inline image 1] Can someone tell me what am I doing wrong. Thanks Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX and Media Resources
Weird... you see rtmt trying to allocate the HQ xcoder? (OOR incrementing or something) To rule out other things: enough BW available on wan link? Rsvp active? Just thinking out loud. Cti ports also in HQ device pool referencing HQ xcoder ? On 17 Apr 2012, at 11:38, Chris devsin2...@gmail.com wrote: Yes. This is all true. I had double checked before my original post. But I did it again after seeing your response. Best Regards Thanks Chris On Tue, Apr 17, 2012 at 7:27 PM, Gurpreet Singh Kukreja tycoononway1...@gmail.com wrote: Hi Chris, I would verify the following: 1) Region setting between HQ and Branch sites uses G.729. 2) All your CTI Route Points should show in HQ DP on the CM and the CCX. 3) The Media Resource (Xcoder) should be configured on the HQ router. 4) The codec selected on the CCX is G.711. 5) Your IP phones show in the correct Device Pool. Last but not the least, make sure that the CTI Route point you dial should also be in the HQ DP with an Xcoder in the MRGL of HQ DP. Let me know if all the above stands true. Regards Gurpreet On Tue, Apr 17, 2012 at 4:17 AM, Chris devsin2...@gmail.com wrote: My UCCX is in HQ device pool. The DP has MRGL allocated to with registered transcoder resources. However, when I try to dial from BR1/BR2. The call fails to connect. The SDI traces on the call manager show following messages: 04/17/2012 15:28:30.231 CCM|MediaManager(9)::disconnOnResourceAllocationFailure, ERROR disconnOnResourceAllocationFailure - fails to allocate MTP/XCoder,connCount=2|CLID::StandAloneClusterNID::10.10IP::10.10.100.14DEV::UCCX_5701LVL::ErrorMASK::0800 Xcoder resource is configured as Transcoding Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.10.100.12, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 1 Reported Max Streams: 6, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 MTP Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.10.100.12, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 3 Reported Max Streams: 20, Reported Max OOS Streams: 0 Supported Codec: pass-thru, Maximum Packetization Period: N/A Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 RSVP : ENABLED MRGL image.png Can someone tell me what am I doing wrong. Thanks Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX and Media Resources (Chris)
Chris you might try debug sccp all (on HQ gateway) to check 1. Call manager's attempt to allocate a xcoder from HQ 2. errors, if any, from HQ gateway, as to why the allocation is failing. thanks, /Baktha -- Message: 1 Date: Tue, 17 Apr 2012 18:17:24 +1000 From: Chris devsin2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] UCCX and Media Resources Message-ID: CAOa86XF5YCUjjHJ--qb8L+29hL2itWxCxT=nom2kxmdilrx...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 My UCCX is in HQ device pool. The DP has MRGL allocated to with registered transcoder resources. However, when I try to dial from BR1/BR2. The call fails to connect. The SDI traces on the call manager show following messages: *04/17/2012 15:28:30.231 CCM|MediaManager(9)::disconnOnResourceAllocationFailure, ERROR disconnOnResourceAllocationFailure - fails to allocate MTP/XCoder,connCount=2|CLID::StandAloneClusterNID::10.10IP::10.10.100.14DEV::UCCX_5701LVL::ErrorMASK::0800 * Xcoder resource is configured as *Transcoding Oper State: ACTIVE - Cause Code: NONE* *Active Call Manager: * *10.10.100**.12, Port Number: 2000* *TCP Link Status: CONNECTED, Profile Identifier: 1* *Reported Max Streams: 6, Reported Max OOS Streams: 0* *Supported Codec: g711ulaw, Maximum Packetization Period: 30* *Supported Codec: g711alaw, Maximum Packetization Period: 30* *Supported Codec: g729ar8, Maximum Packetization Period: 60* *Supported Codec: g729abr8, Maximum Packetization Period: 60* *Supported Codec: g729r8, Maximum Packetization Period: 60* *Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30* *Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30* *Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30* * * *MTP Oper State: ACTIVE - Cause Code: NONE* *Active Call Manager: * *10.10.100**.12, Port Number: 2000* *TCP Link Status: CONNECTED, Profile Identifier: 3* *Reported Max Streams: 20, Reported Max OOS Streams: 0* *Supported Codec: pass-thru, Maximum Packetization Period: N/A* *Supported Codec: g729r8, Maximum Packetization Period: 60* *Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30* *Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30* *Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30* *RSVP : ENABLED* MRGL [image: Inline image 1] Can someone tell me what am I doing wrong. Thanks Chris -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] cme extension mobility help
I have done the cme extension mobility lab and am trying to take what I have learned and apply it to a job I have for a customer. If I shouldn't post a question like this then please let me know or disregard. I have a site where two users need to share a phone. They both have a phone already and configuration for their phones are below. ephone-dn 27 dual-line number 5247 secondary 2224 label 5247 description Susan Sulivan name Susan Sulivan call-forward busy 45247 call-forward noan 45247 timeout 15 corlist incoming user900-international!!ephone 27 device-security-mode none video mac-address 001F.CA36.23FF username ssulivan password 1234 type 7960 keep-conference endcall button 1:27!!ephone-dn 49 dual-line number 5293 secondary 2245 label 5293 description Jenna James name Jenna Price call-forward busy 45293 call-forward noan 45293 timeout 15 corlist incoming user900-international!!ephone 49 device-security-mode none video mac-address 0021.55D6.77C9 username jjames password 1234 type 7940 keep-conference endcall button 1:49!!Under the ephone-dn they have a primary and secondary number so my question would be, can you build a user-profile with primary and secondary numbers? Also, can I configure a logout profile matching the configuration of one of the ephones? I believe what they want is ephone 27 to stay as it is (logout profile I guess) and then build a user-profile matching dn 49 and ephone 49 so the user with this profile can log in and out of ephone 27. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Multi MOH not working..
How are your phones connected to proctorlabs? Unicast is the only thing that will work over the VPN connection... -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Mon, 16 Apr 2012 21:33:46 -0400 Subject: Re: [OSL | CCIE_Voice] Multi MOH not working.. From: juancarlosanz...@gmail.com To: cm3_...@hotmail.com CC: whl...@gmail.com; ccie_voice@onlinestudylist.com Hi Chase, I am having the exact same issue. I had 2 hops configured for my Multicast MOH-Server and CUCM MoH was playing mixed with Flash Moh. I disabled pim dense-mode on the serial interface to fixed it. Right now, MoH is working fine for PSTN Calls. But is not working for internal calls. Did you figure this out? Regards, On Sat, Apr 14, 2012 at 6:26 PM, chase mergenthal cm3_...@hotmail.com wrote: Ok, so I disabled the MTP on the H323 trunk but I'm must be loosing my mind... I am hearing both the MOH stock audio from CUCM, and the piano song in flash at the same time... like right on top of each other... -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sat, 14 Apr 2012 17:14:01 -0500 Subject: Re: [OSL | CCIE_Voice] Multi MOH not working.. From: whl...@gmail.com To: cm3_...@hotmail.com CC: baqari.voic...@gmail.com; ccie_voice@onlinestudylist.com So it is working for local and remote IP phones but not PSTN, is that correct? On Sat, Apr 14, 2012 at 5:10 PM, chase mergenthal cm3_...@hotmail.com wrote: Its the PSTN phone: Telephony call-legs: 1 SIP call-legs: 0 H323 call-legs: 1 Call agent controlled call-legs: 0 SCCP call-legs: 0 Multicast call-legs: 0 Media call-legs: 0 Total call-legs: 2 27F8 : 7 817960ms.1 +840 pid:3555 Answer 3945002 active dur 00:00:05 tx:133/2554 rx:56/1120 IP 192.168.10.14:30260 SRTP: off rtt:0ms pl:1120/40ms lost:0/0/0 delay:70/70/70ms g729r8 TextRelay: off media inactive detected:n media contrl rcvd:n/a timestamp:n/a long duration call detected:n long duration call duration:n/a timestamp:n/a 27F8 : 8 818000ms.1 +800 pid:911 Originate 911 active dur 00:00:05 tx:56/1568 rx:133/2554 Tele 0/0/0:23 (8) [0/0/0.3] tx:6450/2590/0ms g729r8 noise:-68 acom:6 i/0:-66/-63 dBm -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? CC: ccie_voice@onlinestudylist.com From: baqari.voic...@gmail.com Subject: Re: [OSL | CCIE_Voice] Multi MOH not working.. Date: Sun, 15 Apr 2012 02:06:58 +0400 To: cm3_...@hotmail.com Makesure that your flash is having the moh file with correct name used. Apply the command ccm-manager multicast-moh In case still not working, we need to know who is the holdee ? Is it pstn or ip phone ? What the codec used. Post the output of show call active voice brief during hold. Regards,Mohammed Al Baqari Sent from my iPhone On Apr 15, 2012, at 1:44 AM, chase mergenthal cm3_...@hotmail.com wrote: I'm not sure what I'm missing, its working fine on my mgcp gw... HQ-RTR# *Apr 15 02:52:00.995: %SYS-5-CONFIG_I: Configured from console by console HQ-RTR# *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.111: moh_process_ccb: dstadr 0.0.0.0, callid 22, port 0, codec 65535, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.111: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:03.151: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:03.151: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.039: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now connected to 911 N/A HQ-RTR# *Apr 15 02:52:04.047: moh_update_rtp: callID 21 dstCallID 22 *Apr 15 02:52:04.051: moh_process_ccb: dstadr 192.168.10.14, callid 22, port 32292, codec 16, moh_en 0, moh_addr 0.0.0.0 *Apr 15 02:52:04.051: moh_update_rtp: callID 21 dstCallID 22 HQ-RTR# interface Loopback0 ip address 10.10.110.1 255.255.255.255 ip pim dense-mode h323-gateway voip interface h323-gateway voip id VIA ipaddr 10.10.110.1 1719 h323-gateway voip h323-id HQ-RTR interface FastEthernet0/0.20 encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ip pim dense-mode h323-gateway voip bind srcaddr 10.10.200.3 ip multicast-routing ccm-manager music-on-hold telephony-service sdspfarm units 5 sdspfarm transcode sessions 4 sdspfarm tag 1 HQXCODER max-ephones 1 max-dn 1 ip source-address 10.10.200.3 port 2000 max-conferences 8 gain -6 moh flash:/music-on-hold.au multicast moh
[OSL | CCIE_Voice] ordering directory services menu - solution
there's been much information on this including needless deleting and recreating of services - here is a good method that I found works 100% and doesn't need a time wasting dip into the release notes. so SSH into the pub run sql select * from telecasterservice this returns something similar to = == == === == === == a0eed443-c705-4232-86d4-957295dd339c Placed Calls Application:Cisco/PlacedCallsPlaced CallsPlaced Calls1 t t 20 0061bdd2-26c0-46a4-98a3-48a6878edf53 Received Calls Application:Cisco/ReceivedCalls Received Calls Received Calls 1 t t 30 27f92f3c-11ed-45f3-8400-fe06431c0bfc Intercom Calls Application:Cisco/IntercomCalls Intercom Calls Intercom Calls 1 f t 40 7eca2cf1-0c8d-4df4-a807-124b18fe89a4 Corporate Directory Application:Cisco/CorporateDirectory Corporate Directory Corporate Directory 1 t t 10 ca69f2e4-d088-47f8-acb2-ceea6722272e Voicemail Application:Cisco/Voicemail Voicemail Voicemail = == == === == === == a bit confusing without the table headers but the only bit I'm interested in is the pkid I then: run the following command to change the corporate directory priority from 1 to 4; run sql update telecasterservice set Priority=4 where pkid=7eca2cf1-0c8d-4df4-a807-124b18fe89a4 restart the phone this will set the priority of the service and change the order on the menu. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SIP phones continuously toggling between registering and registered on UCM
Hi All, I had an interesting situation today. I started LAB8. Auto-registered the phones. This all worked fine, but SIP phones were continuously toggled between registering and registered. I re-installed the VM to resolve the issue, thinking this to be one of PCs specials. However, has this happened to anyone or why could it happen. Would these be symptoms of db-replication issues. Best Regards Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] ordering directory services menu - solution
it works in my lab - I haven't tried it in the exam but it would really
suck if they did this, then you are stuck with creating the entire insert
either from the release notes or from the run sql select command edit the
returned string taking out the extra vendor and version headers like this.
It only takes a less than a minute.
*Original*
pkid name
urltemplate description
nameascii tkphoneservice vendor version enterprisesubscription
enabled priority tkphoneservicecategory
===
===
=== == == === ==
=== ==
d0059763-cdcc-4be7-a2a8-bbd4aac73f63 Missed Calls
Application:Cisco/MissedCallsMissed CallsMissed
Calls1 t t
10
*Modified*
run sql insert into telecasterservice (pkid, name, urltemplate,
description, nameascii, tkphoneservice, enterprisesubscription, enabled,
priority, tkphoneservicecategory) values
('d0059763-cdcc-4be7-a2a8-bbd4aac73f63','Missed
Calls','Application:Cisco/MissedCalls','Missed Calls','Missed
Calls','1','t','t','1','0')
On Wed, Apr 18, 2012 at 2:55 PM, gabriel gabriel.zicare...@gmail.comwrote:
Hi Steve,
Does it work?
I remember trying to update this same stuff last year and apparently
the admin user had privileges for 'deletes' and 'inserts' but not for
'updates.
Great to see this!
Cheers,
Gabriel
On Wed, Apr 18, 2012 at 1:25 AM, steven moran smoran...@gmail.com wrote:
there's been much information on this including needless deleting and
recreating of services - here is a good method that I found works 100%
and
doesn't need a time wasting dip into the release notes.
so
SSH into the pub
run sql select * from telecasterservice
this returns something similar to
= == == === == ===
==
a0eed443-c705-4232-86d4-957295dd339c Placed Calls
Application:Cisco/PlacedCallsPlaced CallsPlaced Calls
1 t t 2
0
0061bdd2-26c0-46a4-98a3-48a6878edf53 Received Calls
Application:Cisco/ReceivedCalls Received Calls Received Calls
1 t t 3
0
27f92f3c-11ed-45f3-8400-fe06431c0bfc Intercom Calls
Application:Cisco/IntercomCalls Intercom Calls Intercom Calls
1 f t 4
0
7eca2cf1-0c8d-4df4-a807-124b18fe89a4 Corporate Directory
Application:Cisco/CorporateDirectory Corporate Directory Corporate
Directory
1 t t 1
0
ca69f2e4-d088-47f8-acb2-ceea6722272e Voicemail
Application:Cisco/Voicemail Voicemail Voicemail
= == == === == ===
==
a bit confusing without the table headers but the only bit I'm
interested in
is the pkid
I then: run the following command to change the corporate directory
priority
from 1 to 4;
run sql update telecasterservice set Priority=4 where
pkid=7eca2cf1-0c8d-4df4-a807-124b18fe89a4
restart the phone
this will set the priority of the service and change the order on the
menu.
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com http://www.platinumplacement.com/
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SIP phones continuously toggling between
I have seen a lot of these issues and others for both sccp and sip phones when there are dbreplication issues (including during the exam) go to RTMT and look at the DBreplication if it is not 2 2 4 (pub, sub, cluster) then do the following on the sub utils dbreplication stop on the pub utils dbreplication stop utils dbreplication cluserreset utils dbreplication reset all depending upon the size of the databse and the server this can be done in 10 minutes or an hour. I needed to do this in my last exam. Steve ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
