[OSL | CCIE_Voice] [MVA - CALLER PARTY NAME]
Greetings, I'm working on a MVA lab that's asking for the 4 digit calling number and the name. MVA is working perfectly, but nothing I do seems to enable the calling party name. Has anyone been able to accomplish sending the calling name when making an MVA call? If so please share how you did it. If I make the MVA call it only presents the four digits which is ok, but it won't show the calling name until the call is answered. I've read many articles, some of which provide solutions that don't work and some that say it's not supported so I'm looking for the definitive answer on whether this can be done or not. Any feedback appreciated. Thank you, --ms ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CME SIP Phone -- Unity Connection DTMF issue
CME SIP Phone is in remote site with cRTP enabled between the CME HQ sites so RFC2833 / rtp-nte is un-usable. The only other option on CME SIP Phones is sip-notify. The available options on the dial-peer are sip-notify sip-kpml. The only option on Unity Connection is sip-kpml (RFC2833 cannot be used). Everything i have read / tried seems to indicate that sip-notify / sip-kpml do not work (even if using an XCODER). http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/integration/cucme_sip/guide/cucintcucmesip030.html#wp1094879 Did anybody get sip-kpml / sip-notify to work with Unity connection from CME ? -- - Pavan ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Gatekeeper acting weird for codec
Hi folks, I configured the gatekeeper on the Hq router, and when i call from hq to br2(cme) the call set up shows as 16 kbps, but whereas from cme to hq it shows as 128 kbps but the actual call is connected with g729. Even after the call got connected, it stills shows as 128 in the show gatekeeper call. here is the output status: i put the gk-trunk in the hq region as well. any help is much appreciated on this matter. BR2-RTR(config)#do sh voice call stat CallID CID ccVdb Port DSP/Ch Called # Codec Dial-peers 0xC0 13B3 0x49DA073C 50/0/2.0 95002 g729r8 20002/15 1 active call found HQ-RTR(config-gk)#do sh gatek call Total number of active calls = 1. largest hash bucket = 1 GATEKEEPER CALL INFO LocalCallID Age(secs) BW 62-42307 579 33 128(Kbps) ConferenceID CallID SrcCRV A5CF2B43 B52E11E1 81D2B06F 708A730B A5CF2B43 B52E11E1 81D4B06F 708A730B 85 Endpt(s): Alias E.164Addr src EP: BR2-RTR 3002 CallSignalAddr Port RASSignalAddr Port 10.10.110.3 1820 10.10.110.3 62007 Endpt(s): Alias E.164Addr dst EP: gk-trunk_1 95002 CallSignalAddr Port RASSignalAddr Port 10.10.210.10 1720 10.10.210.10 32784 callstate: SEP, DEP, Thank you Krishna.___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
