Re: [OSL | CCIE_Voice] Trancoding
Hi Any update? Regards From: Chrysostomos Christofi Sent: Τρίτη, 18 Σεπτεμβρίου 2012 1:23 μμ To: 'ccie_voice-boun...@onlinestudylist.com' Subject: Trancoding Hi to all I need your input pls for the below I have one cluster cucm and ore remote branch Calls to remode branch are via h2323 with codec g729 Everything its ok except when the call going to voice mail Voice mail is configured with g711ulaw I have created a transcoding in cme but nothing change What is your opinion CME CONFIG ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 ! sccp local GigabitEthernet0/0.100 sccp ccm 10.4.2.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.100 associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode CCME#SHow dspfarm all Dspfarm Profile Configuration Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Trancoding
Can you give us more information, you say VM does not work but does it work for local callers? does it work for PSTN callers? Or do you not have PSTN callers? Can you dial the VM directly? What are the results of show sccp conn when you do this? We just don't have any information but a partial config and it doesn't work. Not enough to go on. Now this is just a wild guess but I seem to remember someone else having an issue like this and they resolved it by using the loopback and not a sub interface. Of course I could be completely wrong as this is just something that is in my foggy memory but don't think it could hurt to try. On another note, why do you have interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 you appear to be setting up for a Gatekeeper but do not have the rest of the commands. If this is just an H323 gateway you do not need h323-gateway voip interface or h323-gateway voip h323-id cme On Wed, Sep 19, 2012 at 2:45 AM, Chrysostomos Christofi ch.christ...@logicom.net wrote: Hi ** ** Any update? ** ** Regards ** ** ** ** *From:* Chrysostomos Christofi *Sent:* Τρίτη, 18 Σεπτεμβρίου 2012 1:23 μμ *To:* 'ccie_voice-boun...@onlinestudylist.com' *Subject:* Trancoding ** ** Hi to all ** ** I need your input pls for the below ** ** I have one cluster cucm and ore remote branch ** ** Calls to remode branch are via h2323 with codec g729 Everything its ok except when the call going to voice mail Voice mail is configured with g711ulaw ** ** I have created a transcoding in cme but nothing change What is your opinion ** ** CME CONFIG ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 ! sccp local GigabitEthernet0/0.100 sccp ccm 10.4.2.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.100 associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode ** ** CCME#SHow dspfarm all Dspfarm Profile Configuration ** ** Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration ** ** ** ** ** ** ** ** Regards ** ** ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Trancoding
Hi Bill And thank you for the reply We have a cue module into cme router(remote branch) The local users(registered to cme) does not have any issue with voice mail or AA Calls from cucm extensions to cme extensions using g729(through device pool/region) I am able to reach any extension in cme but not the voice mail and AA Since we are using g729 for this remote branch(cme) and the voicemail in cme using g711 then for sure I need a transcoding But the problem continue , and the transcoding looks to be registered with the local cme router It's a pure h323 gw and I agree with you that the two commands are not necessary but its not here the issue :) From: Bill Lake [mailto:whl...@gmail.com] Sent: Τετάρτη, 19 Σεπτεμβρίου 2012 1:29 μμ To: Chrysostomos Christofi Cc: Online Study (ccie_voice@onlinestudylist.com) Subject: Re: [OSL | CCIE_Voice] Trancoding Can you give us more information, you say VM does not work but does it work for local callers? does it work for PSTN callers? Or do you not have PSTN callers? Can you dial the VM directly? What are the results of show sccp conn when you do this? We just don't have any information but a partial config and it doesn't work. Not enough to go on. Now this is just a wild guess but I seem to remember someone else having an issue like this and they resolved it by using the loopback and not a sub interface. Of course I could be completely wrong as this is just something that is in my foggy memory but don't think it could hurt to try. On another note, why do you have interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 you appear to be setting up for a Gatekeeper but do not have the rest of the commands. If this is just an H323 gateway you do not need h323-gateway voip interface or h323-gateway voip h323-id cme On Wed, Sep 19, 2012 at 2:45 AM, Chrysostomos Christofi ch.christ...@logicom.netmailto:ch.christ...@logicom.net wrote: Hi Any update? Regards From: Chrysostomos Christofi Sent: Τρίτη, 18 Σεπτεμβρίου 2012 1:23 μμ To: 'ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com' Subject: Trancoding Hi to all I need your input pls for the below I have one cluster cucm and ore remote branch Calls to remode branch are via h2323 with codec g729 Everything its ok except when the call going to voice mail Voice mail is configured with g711ulaw I have created a transcoding in cme but nothing change What is your opinion CME CONFIG ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 ! sccp local GigabitEthernet0/0.100 sccp ccm 10.4.2.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.100 associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode CCME#SHow dspfarm all Dspfarm Profile Configuration Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Trancoding
** ** ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120919/c1164e31/attachment-0001.html -- Message: 2 Date: Wed, 19 Sep 2012 10:40:54 + From: Chrysostomos Christofi ch.christ...@logicom.net To: Bill Lake whl...@gmail.com Cc: Online Study \(ccie_voice@onlinestudylist.com\) ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trancoding Message-ID: f3a446ed84ff9449b29f801927620de783ea8...@exmbxsrv2.lgcom.net Content-Type: text/plain; charset=iso-8859-7 Hi Bill And thank you for the reply We have a cue module into cme router(remote branch) The local users(registered to cme) does not have any issue with voice mail or AA Calls from cucm extensions to cme extensions using g729(through device pool/region) I am able to reach any extension in cme but not the voice mail and AA Since we are using g729 for this remote branch(cme) and the voicemail in cme using g711 then for sure I need a transcoding But the problem continue , and the transcoding looks to be registered with the local cme router It's a pure h323 gw and I agree with you that the two commands are not necessary but its not here the issue :) From: Bill Lake [mailto:whl...@gmail.com] Sent: ???, 19 ??? 2012 1:29 ?? To: Chrysostomos Christofi Cc: Online Study (ccie_voice@onlinestudylist.com) Subject: Re: [OSL | CCIE_Voice] Trancoding Can you give us more information, you say VM does not work but does it work for local callers? does it work for PSTN callers? Or do you not have PSTN callers? Can you dial the VM directly? What are the results of show sccp conn when you do this? We just don't have any information but a partial config and it doesn't work. Not enough to go on. Now this is just a wild guess but I seem to remember someone else having an issue like this and they resolved it by using the loopback and not a sub interface. Of course I could be completely wrong as this is just something that is in my foggy memory but don't think it could hurt to try. On another note, why do you have interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 you appear to be setting up for a Gatekeeper but do not have the rest of the commands. If this is just an H323 gateway you do not need h323-gateway voip interface or h323-gateway voip h323-id cme On Wed, Sep 19, 2012 at 2:45 AM, Chrysostomos Christofi ch.christ...@logicom.netmailto:ch.christ...@logicom.net wrote: Hi Any update? Regards From: Chrysostomos Christofi Sent: ?, 18 ??? 2012 1:23 ?? To: 'ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com' Subject: Trancoding Hi to all I need your input pls for the below I have one cluster cucm and ore remote branch Calls to remode branch are via h2323 with codec g729 Everything its ok except when the call going to voice mail Voice mail is configured with g711ulaw I have created a transcoding in cme but nothing change What is your opinion CME CONFIG ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 ! sccp local GigabitEthernet0/0.100 sccp ccm 10.4.2.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.100 associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode CCME#SHow dspfarm all Dspfarm Profile Configuration Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration Regards
[OSL | CCIE_Voice] Trancoding
: SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration ** ** ** ** ** ** ** ** Regards ** ** ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120919/c1164e31/attachment-0001.ht ml -- Message: 2 Date: Wed, 19 Sep 2012 10:40:54 + From: Chrysostomos Christofi ch.christ...@logicom.net To: Bill Lake whl...@gmail.com Cc: Online Study \(ccie_voice@onlinestudylist.com\) ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trancoding Message-ID: f3a446ed84ff9449b29f801927620de783ea8...@exmbxsrv2.lgcom.net Content-Type: text/plain; charset=iso-8859-7 Hi Bill And thank you for the reply We have a cue module into cme router(remote branch) The local users(registered to cme) does not have any issue with voice mail or AA Calls from cucm extensions to cme extensions using g729(through device pool/region) I am able to reach any extension in cme but not the voice mail and AA Since we are using g729 for this remote branch(cme) and the voicemail in cme using g711 then for sure I need a transcoding But the problem continue , and the transcoding looks to be registered with the local cme router It's a pure h323 gw and I agree with you that the two commands are not necessary but its not here the issue :) From: Bill Lake [mailto:whl...@gmail.com] Sent: ???, 19 ??? 2012 1:29 ?? To: Chrysostomos Christofi Cc: Online Study (ccie_voice@onlinestudylist.com) Subject: Re: [OSL | CCIE_Voice] Trancoding Can you give us more information, you say VM does not work but does it work for local callers? does it work for PSTN callers? Or do you not have PSTN callers? Can you dial the VM directly? What are the results of show sccp conn when you do this? We just don't have any information but a partial config and it doesn't work. Not enough to go on. Now this is just a wild guess but I seem to remember someone else having an issue like this and they resolved it by using the loopback and not a sub interface. Of course I could be completely wrong as this is just something that is in my foggy memory but don't think it could hurt to try. On another note, why do you have interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 you appear to be setting up for a Gatekeeper but do not have the rest of the commands. If this is just an H323 gateway you do not need h323-gateway voip interface or h323-gateway voip h323-id cme On Wed, Sep 19, 2012 at 2:45 AM, Chrysostomos Christofi ch.christ...@logicom.netmailto:ch.christ...@logicom.net wrote: Hi Any update? Regards From: Chrysostomos Christofi Sent: ?, 18 ??? 2012 1:23 ?? To: 'ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com' Subject: Trancoding Hi to all I need your input pls for the below I have one cluster cucm and ore remote branch Calls to remode branch are via h2323 with codec g729 Everything its ok except when the call going to voice mail Voice mail is configured with g711ulaw I have created a transcoding in cme but nothing change What is your opinion CME CONFIG ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 ! sccp local GigabitEthernet0/0.100 sccp ccm 10.4.2.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.100 associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode CCME#SHow dspfarm all Dspfarm Profile Configuration Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode
Re: [OSL | CCIE_Voice] Trancoding
associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode ** ** CCME#SHow dspfarm all Dspfarm Profile Configuration ** ** Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration ** ** ** ** ** ** ** ** Regards ** ** ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120919/c1164e31/attachment-0001.ht ml -- Message: 2 Date: Wed, 19 Sep 2012 10:40:54 + From: Chrysostomos Christofi ch.christ...@logicom.net To: Bill Lake whl...@gmail.com Cc: Online Study \(ccie_voice@onlinestudylist.com\) ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trancoding Message-ID: f3a446ed84ff9449b29f801927620de783ea8...@exmbxsrv2.lgcom.net Content-Type: text/plain; charset=iso-8859-7 Hi Bill And thank you for the reply We have a cue module into cme router(remote branch) The local users(registered to cme) does not have any issue with voice mail or AA Calls from cucm extensions to cme extensions using g729(through device pool/region) I am able to reach any extension in cme but not the voice mail and AA Since we are using g729 for this remote branch(cme) and the voicemail in cme using g711 then for sure I need a transcoding But the problem continue , and the transcoding looks to be registered with the local cme router It's a pure h323 gw and I agree with you that the two commands are not necessary but its not here the issue :) From: Bill Lake [mailto:whl...@gmail.com] Sent: ???, 19 ??? 2012 1:29 ?? To: Chrysostomos Christofi Cc: Online Study (ccie_voice@onlinestudylist.com) Subject: Re: [OSL | CCIE_Voice] Trancoding Can you give us more information, you say VM does not work but does it work for local callers? does it work for PSTN callers? Or do you not have PSTN callers? Can you dial the VM directly? What are the results of show sccp conn when you do this? We just don't have any information but a partial config and it doesn't work. Not enough to go on. Now this is just a wild guess but I seem to remember someone else having an issue like this and they resolved it by using the loopback and not a sub interface. Of course I could be completely wrong as this is just something that is in my foggy memory but don't think it could hurt to try. On another note, why do you have interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 you appear to be setting up for a Gatekeeper but do not have the rest of the commands. If this is just an H323 gateway you do not need h323-gateway voip interface or h323-gateway voip h323-id cme On Wed, Sep 19, 2012 at 2:45 AM, Chrysostomos Christofi ch.christ...@logicom.netmailto:ch.christ...@logicom.net wrote: Hi Any update? Regards From: Chrysostomos Christofi Sent: ?, 18 ??? 2012 1:23 ?? To: 'ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com' Subject: Trancoding Hi to all I need your input pls for the below I have one cluster cucm and ore remote branch Calls to remode branch are via h2323 with codec g729 Everything its ok except when the call going to voice mail Voice mail is configured with g711ulaw I have created a transcoding in cme but nothing change What is your opinion CME CONFIG ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface
[OSL | CCIE_Voice] Trancoding
/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 ! sccp local GigabitEthernet0/0.100 sccp ccm 10.4.2.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.100 associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode ** ** CCME#SHow dspfarm all Dspfarm Profile Configuration ** ** Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration ** ** ** ** ** ** ** ** Regards ** ** ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120919/c1164e31/attachment-0001.h t ml -- Message: 2 Date: Wed, 19 Sep 2012 10:40:54 + From: Chrysostomos Christofi ch.christ...@logicom.net To: Bill Lake whl...@gmail.com Cc: Online Study \(ccie_voice@onlinestudylist.com\) ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trancoding Message-ID: f3a446ed84ff9449b29f801927620de783ea8...@exmbxsrv2.lgcom.net Content-Type: text/plain; charset=iso-8859-7 Hi Bill And thank you for the reply We have a cue module into cme router(remote branch) The local users(registered to cme) does not have any issue with voice mail or AA Calls from cucm extensions to cme extensions using g729(through device pool/region) I am able to reach any extension in cme but not the voice mail and AA Since we are using g729 for this remote branch(cme) and the voicemail in cme using g711 then for sure I need a transcoding But the problem continue , and the transcoding looks to be registered with the local cme router It's a pure h323 gw and I agree with you that the two commands are not necessary but its not here the issue :) From: Bill Lake [mailto:whl...@gmail.com] Sent: ???, 19 ??? 2012 1:29 ?? To: Chrysostomos Christofi Cc: Online Study (ccie_voice@onlinestudylist.com) Subject: Re: [OSL | CCIE_Voice] Trancoding Can you give us more information, you say VM does not work but does it work for local callers? does it work for PSTN callers? Or do you not have PSTN callers? Can you dial the VM directly? What are the results of show sccp conn when you do this? We just don't have any information but a partial config and it doesn't work. Not enough to go on. Now this is just a wild guess but I seem to remember someone else having an issue like this and they resolved it by using the loopback and not a sub interface. Of course I could be completely wrong as this is just something that is in my foggy memory but don't think it could hurt to try. On another note, why do you have interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 you appear to be setting up for a Gatekeeper but do not have the rest of the commands. If this is just an H323 gateway you do not need h323-gateway voip interface or h323-gateway voip h323-id cme On Wed, Sep 19, 2012 at 2:45 AM, Chrysostomos Christofi ch.christ...@logicom.netmailto:ch.christ...@logicom.net wrote: Hi Any update? Regards From: Chrysostomos Christofi Sent: ?, 18 ??? 2012 1:23 ?? To: 'ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com' Subject: Trancoding Hi to all I need your input pls for the below I have one cluster cucm
Re: [OSL | CCIE_Voice] Trancoding
?? *To:* 'ccie_voice-boun...@onlinestudylist.com' *Subject:* Trancoding ** ** Hi to all ** ** I need your input pls for the below ** ** I have one cluster cucm and ore remote branch ** ** Calls to remode branch are via h2323 with codec g729 Everything its ok except when the call going to voice mail Voice mail is configured with g711ulaw ** ** I have created a transcoding in cme but nothing change What is your opinion ** ** CME CONFIG ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 ! sccp local GigabitEthernet0/0.100 sccp ccm 10.4.2.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.100 associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode ** ** CCME#SHow dspfarm all Dspfarm Profile Configuration ** ** Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration ** ** ** ** ** ** ** ** Regards ** ** ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120919/c1164e31/attachment-0001.h t ml -- Message: 2 Date: Wed, 19 Sep 2012 10:40:54 + From: Chrysostomos Christofi ch.christ...@logicom.net To: Bill Lake whl...@gmail.com Cc: Online Study \(ccie_voice@onlinestudylist.com\) ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trancoding Message-ID: f3a446ed84ff9449b29f801927620de783ea8...@exmbxsrv2.lgcom.net Content-Type: text/plain; charset=iso-8859-7 Hi Bill And thank you for the reply We have a cue module into cme router(remote branch) The local users(registered to cme) does not have any issue with voice mail or AA Calls from cucm extensions to cme extensions using g729(through device pool/region) I am able to reach any extension in cme but not the voice mail and AA Since we are using g729 for this remote branch(cme) and the voicemail in cme using g711 then for sure I need a transcoding But the problem continue , and the transcoding looks to be registered with the local cme router It's a pure h323 gw and I agree with you that the two commands are not necessary but its not here the issue :) From: Bill Lake [mailto:whl...@gmail.com] Sent: ???, 19 ??? 2012 1:29 ?? To: Chrysostomos Christofi Cc: Online Study (ccie_voice@onlinestudylist.com) Subject: Re: [OSL | CCIE_Voice] Trancoding Can you give us more information, you say VM does not work but does it work for local callers? does it work for PSTN callers? Or do you not have PSTN callers? Can you dial the VM directly? What are the results of show sccp conn when you do this? We just don't have any information but a partial config and it doesn't work. Not enough to go on. Now this is just a wild guess but I seem to remember someone else having an issue like this and they resolved it by using the loopback and not a sub interface. Of course I could be completely wrong as this is just something that is in my foggy memory but don't think it could hurt to try. On another note, why do you have interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 you appear to be setting up for a Gatekeeper but do not have the rest
Re: [OSL | CCIE_Voice] Trancoding
ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 you appear to be setting up for a Gatekeeper but do not have the rest of the commands. If this is just an H323 gateway you do not need h323-gateway voip interface or h323-gateway voip h323-id cme On Wed, Sep 19, 2012 at 2:45 AM, Chrysostomos Christofi ch.christ...@logicom.net wrote: Hi ** ** Any update? ** ** Regards ** ** ** ** *From:* Chrysostomos Christofi *Sent:* ?, 18 ??? 2012 1:23 ?? *To:* 'ccie_voice-boun...@onlinestudylist.com' *Subject:* Trancoding ** ** Hi to all ** ** I need your input pls for the below ** ** I have one cluster cucm and ore remote branch ** ** Calls to remode branch are via h2323 with codec g729 Everything its ok except when the call going to voice mail Voice mail is configured with g711ulaw ** ** I have created a transcoding in cme but nothing change What is your opinion ** ** CME CONFIG ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 ! sccp local GigabitEthernet0/0.100 sccp ccm 10.4.2.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.100 associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode ** ** CCME#SHow dspfarm all Dspfarm Profile Configuration ** ** Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration ** ** ** ** ** ** ** ** Regards ** ** ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120919/c1164e31/attachment-0001. h t ml -- Message: 2 Date: Wed, 19 Sep 2012 10:40:54 + From: Chrysostomos Christofi ch.christ...@logicom.net To: Bill Lake whl...@gmail.com Cc: Online Study \(ccie_voice@onlinestudylist.com\) ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trancoding Message-ID: f3a446ed84ff9449b29f801927620de783ea8...@exmbxsrv2.lgcom.net Content-Type: text/plain; charset=iso-8859-7 Hi Bill And thank you for the reply We have a cue module into cme router(remote branch) The local users(registered to cme) does not have any issue with voice mail or AA Calls from cucm extensions to cme extensions using g729(through device pool/region) I am able to reach any extension in cme but not the voice mail and AA Since we are using g729 for this remote branch(cme) and the voicemail in cme using g711 then for sure I need a transcoding But the problem continue , and the transcoding looks to be registered with the local cme router It's a pure h323 gw and I agree with you that the two commands are not necessary but its not here the issue :) From: Bill Lake [mailto:whl...@gmail.com] Sent: ???, 19 ??? 2012 1:29 ?? To: Chrysostomos Christofi Cc: Online Study (ccie_voice@onlinestudylist.com) Subject: Re: [OSL | CCIE_Voice] Trancoding Can you give us more information, you say VM does not work but does it work for local callers? does it work for PSTN callers? Or do you not have PSTN callers? Can you dial the VM directly? What are the results of show sccp conn when you do this? We just don't have any information but a partial config and it doesn't work. Not enough to go on. Now
Re: [OSL | CCIE_Voice] Trancoding
for the below ** ** I have one cluster cucm and ore remote branch ** ** Calls to remode branch are via h2323 with codec g729 Everything its ok except when the call going to voice mail Voice mail is configured with g711ulaw ** ** I have created a transcoding in cme but nothing change What is your opinion ** ** CME CONFIG ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 ! sccp local GigabitEthernet0/0.100 sccp ccm 10.4.2.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.100 associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode ** ** CCME#SHow dspfarm all Dspfarm Profile Configuration ** ** Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration ** ** ** ** ** ** ** ** Regards ** ** ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120919/c1164e31/attachment-0001.h t ml -- Message: 2 Date: Wed, 19 Sep 2012 10:40:54 + From: Chrysostomos Christofi ch.christ...@logicom.net To: Bill Lake whl...@gmail.com Cc: Online Study \(ccie_voice@onlinestudylist.com\) ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trancoding Message-ID: f3a446ed84ff9449b29f801927620de783ea8...@exmbxsrv2.lgcom.net Content-Type: text/plain; charset=iso-8859-7 Hi Bill And thank you for the reply We have a cue module into cme router(remote branch) The local users(registered to cme) does not have any issue with voice mail or AA Calls from cucm extensions to cme extensions using g729(through device pool/region) I am able to reach any extension in cme but not the voice mail and AA Since we are using g729 for this remote branch(cme) and the voicemail in cme using g711 then for sure I need a transcoding But the problem continue , and the transcoding looks to be registered with the local cme router It's a pure h323 gw and I agree with you that the two commands are not necessary but its not here the issue :) From: Bill Lake [mailto:whl...@gmail.com] Sent: ???, 19 ??? 2012 1:29 ?? To: Chrysostomos Christofi Cc: Online Study (ccie_voice@onlinestudylist.com) Subject: Re: [OSL | CCIE_Voice] Trancoding Can you give us more information, you say VM does not work but does it work for local callers? does it work for PSTN callers? Or do you not have PSTN callers? Can you dial the VM directly? What are the results of show sccp conn when you do this? We just don't have any information but a partial config and it doesn't work. Not enough to go on. Now this is just a wild guess but I seem to remember someone else having an issue like this and they resolved it by using the loopback and not a sub interface. Of course I could be completely wrong as this is just something that is in my foggy memory but don't think it could hurt to try. On another note, why do you have interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 you appear to be setting up for a Gatekeeper but do not have the rest of the commands. If this is just
Re: [OSL | CCIE_Voice] Trancoding
srcaddr 10.4.2.1 you appear to be setting up for a Gatekeeper but do not have the rest of the commands. If this is just an H323 gateway you do not need h323-gateway voip interface or h323-gateway voip h323-id cme On Wed, Sep 19, 2012 at 2:45 AM, Chrysostomos Christofi ch.christ...@logicom.net wrote: Hi ** ** Any update? ** ** Regards ** ** ** ** *From:* Chrysostomos Christofi *Sent:* ?, 18 ??? 2012 1:23 ?? *To:* 'ccie_voice-boun...@onlinestudylist.com' *Subject:* Trancoding ** ** Hi to all ** ** I need your input pls for the below ** ** I have one cluster cucm and ore remote branch ** ** Calls to remode branch are via h2323 with codec g729 Everything its ok except when the call going to voice mail Voice mail is configured with g711ulaw ** ** I have created a transcoding in cme but nothing change What is your opinion ** ** CME CONFIG ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 ip address 10.4.2.1 255.255.255.0 h323-gateway voip interface h323-gateway voip h323-id cme h323-gateway voip bind srcaddr 10.4.2.1 ! sccp local GigabitEthernet0/0.100 sccp ccm 10.4.2.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.100 associate ccm 1 priority 1 associate profile 2 register transcode ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 8 associate application SCCP ! telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 2 transcode ** ** CCME#SHow dspfarm all Dspfarm Profile Configuration ** ** Profile ID = 2, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 8 Number of Resource Available : 8 Codec Configuration: num_of_codecs:6 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Dspfarm Profile Configuration ** ** ** ** ** ** ** ** Regards ** ** ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120919/c1164e31/attachment-0001.h t ml -- Message: 2 Date: Wed, 19 Sep 2012 10:40:54 + From: Chrysostomos Christofi ch.christ...@logicom.net To: Bill Lake whl...@gmail.com Cc: Online Study \(ccie_voice@onlinestudylist.com\) ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trancoding Message-ID: f3a446ed84ff9449b29f801927620de783ea8...@exmbxsrv2.lgcom.net Content-Type: text/plain; charset=iso-8859-7 Hi Bill And thank you for the reply We have a cue module into cme router(remote branch) The local users(registered to cme) does not have any issue with voice mail or AA Calls from cucm extensions to cme extensions using g729(through device pool/region) I am able to reach any extension in cme but not the voice mail and AA Since we are using g729 for this remote branch(cme) and the voicemail in cme using g711 then for sure I need a transcoding But the problem continue , and the transcoding looks to be registered with the local cme router It's a pure h323 gw and I agree with you that the two commands are not necessary but its not here the issue :) From: Bill Lake [mailto:whl...@gmail.com] Sent: ???, 19 ??? 2012 1:29 ?? To: Chrysostomos Christofi Cc: Online Study (ccie_voice@onlinestudylist.com) Subject: Re: [OSL | CCIE_Voice] Trancoding Can you give us more information, you say VM does not work but does it work for local callers? does it work for PSTN callers? Or do you not have PSTN callers? Can you dial the VM directly? What are the results of show sccp conn when you do this? We just don't have any
Re: [OSL | CCIE_Voice] Call Registration issue
Please unsubscribe me On Mon, Sep 17, 2012 at 7:17 AM, Alpesh Bhakta bhakta.alp...@gmail.comwrote: We have multiple sites with their own CallManagers. I am trying to get one of my phones to register with another one of the CM servers. There is a WAN link between the sites. I added the phone to the other CM and I manually configured the TFTP setting on my phone. What all do I need to manually configure on my phone to get it to register with the other CM? Thanks! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] 3945 mgcp voice gateway inbound/outbound call with no voice
Dear Experts; We have replaced the old 3745 Voice gateway with 3945 and this gateway is registered in cucm 7.0 as mgcp gateway. We replace the Box and put the new 3945 in rack and plug out the E1 and Ethernet cable and plugin in 3945. From call manager side we deleted the 3745 and added 3945 and it registered. Call established outbound and inbound and for both calls there is No VOICE in both the ways. Appreciate your help. Attaching sh run sh invent and deb isdn q931 Regards Darsh IPCC_VG# sh hardware inventory NAME: CISCO3945-CHASSIS, DESCR: CISCO3945-CHASSIS PID: CISCO3945-CHASSIS , VID: V02, SN: FGL161911R6 NAME: Cisco Services Performance Engine 150 for Cisco 3900 ISR on Slot 0, DESCR: Cisco Services Performance Engine 150 for Cisco 3900 ISR PID: C3900-SPE150/K9 , VID: V05 , SN: FOC161769PJ NAME: VWIC3-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0, DESCR: VWIC3-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 PID: VWIC3-2MFT-T1/E1 , VID: V01 , SN: FOC1616789W NAME: VWIC3-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 1, DESCR: VWIC3-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 PID: VWIC3-2MFT-T1/E1 , VID: V01 , SN: FOC161678FL NAME: VWIC3-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 2, DESCR: VWIC3-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 PID: VWIC3-2MFT-T1/E1 , VID: V01 , SN: FOC161678AL NAME: PVDM3 DSP DIMM with 128 Channels on Slot 0 SubSlot 4, DESCR: PVDM3 DSP DIMM with 128 Channels PID: PVDM3-128 , VID: V01 , SN: FOC16176EN4 NAME: PVDM3 DSP DIMM with 128 Channels on Slot 0 SubSlot 5, DESCR: PVDM3 DSP DIMM with 128 Channels --More-- PID: PVDM3-128 , VID: V01 , SN: FOC16176EMT --More-- NAME: PVDM3 DSP DIMM with 128 Channels on Slot 0 SubSlot 6, DESCR: PVDM3 DSP DIMM with 128 Channels --More-- PID: PVDM3-128 , VID: V01 , SN: FOC16176EQ7 --More-- NAME: C3900 AC Power Supply 1, DESCR: C3900 AC Power Supply 1 PID: PWR-3900-AC , VID: V03, SN: SNI1611C8JX ---Sample Call DEBUG ISDN Q931 logs- IPCC_VG# Sep 18 22:17:39.160: ISDN Se0/0/0:15 Q931: RX - FACILITY pd = 8 callref = N/A Facility i = 0x91A13702029D12060A2B0C028853033601010130250A010404200014080008040003 Protocol Profile = Remote Operations Protocol 0xA13702029D12060A2B0C028853033601010130250A010404200014080008040003 Component = Invoke component, Unsupported operation Sep 18 22:17:39.500: ISDN Se0/2/0:15 Q931: RX - ALERTING pd = 8 callref = 0x8004 Sep 18 22:17:42.109: ISDN Se0/1/1:15 Q931: RX - FACILITY pd = 8 callref = N/A Facility i = 0x91A13702025018060A2B0C028853033601010130250A010404200014080008040003 Protocol Profile = Remote Operations Protocol 0xA13702025018060A2B0C028853033601010130250A010404200014080008040003 Component = Invoke component, Unsupported operation Sep 18 22:17:42.541: ISDN Se0/2/0:15 Q931: RX - CONNECT pd = 8 callref = 0x8004 Date/Time i = 0x0C09130111 Date (dd-mm-yr) = 12-09-19 Time (hr:mnt:sec) = 01:17:172 Sep 18 22:17:42.545: ISDN Se0/2/0:15 Q931: TX - CONNECT_ACK pd = 8 callref = 0x0004 Sep 18 22:17:43.249: ISDN Se0/1/1:15 Q931: RX - SETUP pd = 8 callref = 0x54ED Sending Complete Bearer Capability i = 0x8090A3 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98398 Exclusive, Channel 24 Calling Party Number i = 0x2181, '36580101' Plan:ISDN, Type:National Called Party Number i = 0x81, '36107113' Plan:ISDN, Type:Unknown Sep 18 22:17:43.257: ISDN Se0/1/1:15 Q931: TX - CALL_PROC pd = 8 callref = 0xD4ED Channel ID i = 0xA98398 Exclusive, Channel 24 Sep 18 22:17:43.289: ISDN Se0/1/1:15 Q931: TX - CONNECT pd = 8 callref = 0xD4ED Sep 18 22:17:43.313: ISDN Se0/1/1:15 Q931: RX - CONNECT_ACK pd = 8 callref = 0x54ED Sep 18 22:17:43.337: ISDN Se0/2/0:15 Q931: RX - FACILITY pd = 8 callref = N/A Facility i = 0x91A137020246DD060A2B0C028853033601010130250A010404200014080008040003 Protocol Profile = Remote Operations Protocol 0xA137020246DD060A2B0C028853033601010130250A010404200014080008040003 Component = Invoke component, Unsupported
Re: [OSL | CCIE_Voice] 3945 mgcp voice gateway inbound/outbound call with no voice
I did not see the mgcp bind control and media statements. mgcp bind control source-interface lo0 (for example using loopback0) mgcp bind media source-interface lo0 Have a great day! Thanks, Randall From: darshan ccievoice0...@hotmail.com To: ccie_voice@onlinestudylist.com Sent: Wednesday, September 19, 2012 1:49 PM Subject: [OSL | CCIE_Voice] 3945 mgcp voice gateway inbound/outbound call with no voice Dear Experts; We have replaced the old 3745 Voice gateway with 3945 and this gateway is registered in cucm 7.0 as mgcp gateway. We replace the Box and put the new 3945 in rack and plug out the E1 and Ethernet cable and plugin in 3945. From call manager side we deleted the 3745 and added 3945 and it registered. Call established outbound and inbound and for both calls there is No VOICE in both the ways. Appreciate your help. Attaching sh run sh invent and deb isdn q931 Regards Darsh ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com