[OSL | CCIE_Voice] A simple uccx script for the requirement
HI All, I am trying to write a uccx script for the following requirement and not able understanding the logic here could someone help? I there a simple script that can be written for this? I have two IPCC extensions 1 on HQ Phone 2 ( ext: 2102) and 1 on SiteB Phone 2 (ext: 3102). Incoming calls from +44 number will be serviced by 2102 phone only and all other calls will be routed to the normal queue. If the call hits the queue, the user should hear the defaults prompt, all are agents are currently busy... Then they should hear their position in the queue. - Vir ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] LAB IN 1 Hr
Got lab 7 in SJC very big lab i completed in 6 hrs time was having full hopes will clear the test Lost in few sections like VG i got only 53% and HA less marks and did not got marks in LAN qos. I did exactly the way cisco expected this is really bugging me about VG section as it was total 17 marks If anyone want to be study partner please email me so that we can crack the lab my friend attempted the same day he got lab 7 again twice its really really painful because we both got 53% in VG and i want to know why all people missing in this for no reasons. Waiting for all to reply, Email me so that we can talk more rest all sections i got 100% so if needed i can share the solutions. On Sat, Mar 23, 2013 at 3:57 AM, Josh Petro josh.pe...@gmail.com wrote: Good luck and God Bless! On Mar 22, 2013 10:39 AM, Peter Rody peterrodyc...@gmail.com wrote: Hello friends, Ready for the attempt just starting from hotel now its long practice please pray for my attempt. Everyone comes out say i pass its feel so good but i think i might be first guy need your prayers starting from my hotel now. Not able to sleep whole night properly. Feel like on a top of the world now Thanks zillon to all of you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Expected lab 7 in SJC first attempt
Got lab 7 in SJC very big lab i completed in 6 hrs time was having full hopes will clear the test Lost in few sections like VG i got only 53% and HA less marks and did not got marks in LAN qos. I did exactly the way cisco expected this is really bugging me about VG section as it was total 17 marks If anyone want to be study partner please email me so that we can crack the lab my friend attempted the same day he got lab 7 again twice its really really painful because we both got 53% in VG and i want to know why all people missing in this for no reasons. Waiting for all to reply, Email me so that we can talk more rest all sections i got 100% so if needed i can share the solutions. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Outgoing Calls via T1 failed
Dears, Thanks for your input , I'll try the suggested and let you know.. but do you think changing the value of the Service Parameters -- CCM-- change B-channale status to = s0/su0/...@ VGname =. affect my configuration ? Regards On Sat, Mar 23, 2013 at 3:59 AM, Justin Carney justin.s.car...@gmail.comwrote: Your debug output has a few clues...but I can't recall offhand if channel 16 in that debug starts at 1 (meaning this is the 16th channel) or 0 (meaning this is the 17th channel). Do inbound calls from pstn work? If yes, its more likely the second option. In the first case, it would appear your issue is on the pstn side. Run show ISDN status and layer 2 should show multiple frame established and layer 3 should show ccm-manager (or similar). If however layer 2 shows tei assigned try the following: Mgcp bind media source lo0 Mgcp bind control source lo0 (Paste those commands twice) Int s0/0/0 No ISDN bind-l3 ccm ISDN bind-l3 ccm No mgcp Mgcp Show ISDN status (Ensure you see multi frame established) Also type show ccm and ensure the gw is registered to your cucm. If not, make sure that your hostname on the router matches what you have in cucm. If you have IP domain-name ipexpert.com in your config then you need to use the fqdn in cucm, such as r3.ipexpert.com. however if you don't have a domain name on the router then you should just have the routers hostname w/o domain such as r3. Now, for the other situation if channel 16 in the debug is really channel 17, that could be caused by using the ccm config command. With this, every time in cucm you reset the mgcp gw it will apply a no mgcp then mgcp and download the config from cucm to the router (and configure a FULL PRI). Ccm config command doesn't work with a fractional PRI, but you could use it to download all the commands, then no ccm config and change the controller commands to use timeslots 1-16 rather than 1-24. (Need to shut voice port, shut int s0/0/0 and no ISDN bind-l3 ccm, shut controller and remove timeslots command, then apply commands in reverse order using fractional timeslots). Not a solution, but just for reference, the default channel order for mgcp PRI is bottom up. If your issue is the latter (ccm config downloaded a full PRI config) and you were set to use ascending channels you would not have seen this issue until the 17th call came from pstn...in real lab you would lose points for having a full PRI I stead of fractional, even if calls did work. The point here is make sure you remove ccm config if you have a fractional PRI. Hope this helps... Justin On Mar 22, 2013 7:36 PM, Bill whl...@gmail.com wrote: Is your gateway registered in CUCM? Are you getting the proper output of your show commands? Show isdn status, show ccm Do you have int seri x/x/x Isdn bind-l3 ccm Did you try no MGCP MGCP? Can you post more of your config? Sent from my iPad On Mar 22, 2013, at 4:52 PM, CCIEing aboaz...@gmail.com wrote: Hi all, After configuring my HQ GW as MGCP, then configure my T1 to register with cucm , I was govern by the lack of the DSP resources, which force me to define only 16 channel out of the 23 on my pri-group under the T1 controller configuration !! here is the config : controller T1 0/0/0 pri-group timeslots 1-16 service mgcp Then I faced a problem with my outgoing calls , the calls was dropping due to the cause *Requested circuit/channel not available* My Question here, as there is 16 channel in my Pri-group are already configured, why all calls get dropped with cause of non availability of the resources, Why not to use one of the available channels (1-16) Appreciate your help here is below the output of debug q931 for one of my outgoing calls: *SDN Se0/0/0:23 Q931: TX - SETUP pd = 8 callref = 0x000F * *Bearer Capability i = 0x8090A2 * *Standard = CCITT * *Transfer Capability = Speech * *Transfer Mode = Circuit * *Transfer Rate = 64 kbit/s * *Channel ID i = 0xA98390 * *Exclusive, Channel 16 * *Display i = 'HQ PH1' * *Calling Party Number i = 0x2181, '7772022001' * *Plan:ISDN, Type:National * *Called Party Number i = 0x81, '911' * *Plan:ISDN, Type:Unknown* *ISDN Se0/0/0:23 Q931: RX - RELEASE_COMP pd = 8 callref = 0x800F * *Cause i = 0x82AC1810 - Requested circuit/channel not available* ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out
Re: [OSL | CCIE_Voice] Outgoing Calls via T1 failed
Well, I configured the pri-timeslots 1-16, because I have no dsp to configure all the 23 b-channels . On Sun, Mar 24, 2013 at 12:44 AM, Edgar Feliz ejzi...@gmail.com wrote: Are you sure the PSTN router has 1-16 configured for that GW. I had a similar issue because I had forgotten what I had set on PSTN router with only 4 slots and configure my GW with 8. Edgar On Fri, Mar 22, 2013 at 5:52 PM, CCIEing aboaz...@gmail.com wrote: Hi all, After configuring my HQ GW as MGCP, then configure my T1 to register with cucm , I was govern by the lack of the DSP resources, which force me to define only 16 channel out of the 23 on my pri-group under the T1 controller configuration !! here is the config : controller T1 0/0/0 pri-group timeslots 1-16 service mgcp Then I faced a problem with my outgoing calls , the calls was dropping due to the cause *Requested circuit/channel not available* My Question here, as there is 16 channel in my Pri-group are already configured, why all calls get dropped with cause of non availability of the resources, Why not to use one of the available channels (1-16) Appreciate your help here is below the output of debug q931 for one of my outgoing calls: *SDN Se0/0/0:23 Q931: TX - SETUP pd = 8 callref = 0x000F * *Bearer Capability i = 0x8090A2 * *Standard = CCITT * *Transfer Capability = Speech * *Transfer Mode = Circuit * *Transfer Rate = 64 kbit/s * *Channel ID i = 0xA98390 * *Exclusive, Channel 16 * *Display i = 'HQ PH1' * *Calling Party Number i = 0x2181, '7772022001' * *Plan:ISDN, Type:National * *Called Party Number i = 0x81, '911' * *Plan:ISDN, Type:Unknown* *ISDN Se0/0/0:23 Q931: RX - RELEASE_COMP pd = 8 callref = 0x800F * *Cause i = 0x82AC1810 - Requested circuit/channel not available* ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Network side vs User side clocking !
Hi geeks :) What is the difference between using Network side clocking and User Side clocking. Regarding the exam, do they ask us to use any one of the both in particular ? I saw practice question informing that the PRI circuit layer 2 should be user side where as it will be a network side clocking for layer 1 as for the last sentence (network site), I would assume that we will use *network-clock- participate wic X* * * *Waiting your valuable input * ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Gateway not registering to Gatekeeper
Hi, Any idea why my gateway wouldn't register to my gatekeeper, I had all the configs under the SC SVI and basic configs on the SA GK? - Hugo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Gateway not registering to Gatekeeper
My lab finished and I didn't copy the configs, however thinking about it now I had SA GK tied to the Lo0 interface and I don't recall seeing the ip ospf network point-to-point command under it. Regards, Hugo Barrera 951.473.3450 On Mar 23, 2013, at 4:17 PM, Leslie Meade leslie.me...@lvs1.com wrote: Show the configs... little hard to tell what the issue is... Leslie Meade -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Barrera, Hugo Sent: Saturday, March 23, 2013 3:51 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Gateway not registering to Gatekeeper Hi, Any idea why my gateway wouldn't register to my gatekeeper, I had all the configs under the SC SVI and basic configs on the SA GK? - Hugo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Gateway not registering to Gatekeeper
Got the 'gateway' command under global configuration mode? On Saturday, March 23, 2013, Barrera, Hugo wrote: My lab finished and I didn't copy the configs, however thinking about it now I had SA GK tied to the Lo0 interface and I don't recall seeing the ip ospf network point-to-point command under it. Regards, Hugo Barrera 951.473.3450 On Mar 23, 2013, at 4:17 PM, Leslie Meade leslie.me...@lvs1.comjavascript:; wrote: Show the configs... little hard to tell what the issue is... Leslie Meade -Original Message- From: ccie_voice-boun...@onlinestudylist.com javascript:; [mailto: ccie_voice-boun...@onlinestudylist.com javascript:;] On Behalf Of Barrera, Hugo Sent: Saturday, March 23, 2013 3:51 PM To: ccie_voice@onlinestudylist.com javascript:; Subject: [OSL | CCIE_Voice] Gateway not registering to Gatekeeper Hi, Any idea why my gateway wouldn't register to my gatekeeper, I had all the configs under the SC SVI and basic configs on the SA GK? - Hugo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Gateway not registering to Gatekeeper
Yah had it, did no gateway gateway a couple times and also bounced the GK side. Regards, Hugo On Mar 23, 2013, at 4:48 PM, Tony Zunt tony.z...@gmail.commailto:tony.z...@gmail.com wrote: Got the 'gateway' command under global configuration mode? On Saturday, March 23, 2013, Barrera, Hugo wrote: My lab finished and I didn't copy the configs, however thinking about it now I had SA GK tied to the Lo0 interface and I don't recall seeing the ip ospf network point-to-point command under it. Regards, Hugo Barrera 951.473.3450 On Mar 23, 2013, at 4:17 PM, Leslie Meade javascript:;leslie.me...@lvs1.commailto:leslie.me...@lvs1.com wrote: Show the configs... little hard to tell what the issue is... Leslie Meade -Original Message- From: javascript:; ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com [mailto:javascript:;ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Barrera, Hugo Sent: Saturday, March 23, 2013 3:51 PM To: javascript:; ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Gateway not registering to Gatekeeper Hi, Any idea why my gateway wouldn't register to my gatekeeper, I had all the configs under the SC SVI and basic configs on the SA GK? - Hugo ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out http://www.PlatinumPlacement.com www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out http://www.PlatinumPlacement.com www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] LAB IN 1 Hr
grand welcome to the lab 7 carnival! many people get the lab7 on 2nd attempt , do the same things and score very high points and fail or pass (no visibility to points) .. so with this lab 7 there is no definitive answer on many things like CUPC, signaling, call routing. Date: Sun, 24 Mar 2013 01:33:10 +0530 From: peterrodyc...@gmail.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] LAB IN 1 Hr Got lab 7 in SJC very big lab i completed in 6 hrs time was having full hopes will clear the test Lost in few sections like VG i got only 53% and HA less marks and did not got marks in LAN qos. I did exactly the way cisco expected this is really bugging me about VG section as it was total 17 marks If anyone want to be study partner please email me so that we can crack the lab my friend attempted the same day he got lab 7 again twice its really really painful because we both got 53% in VG and i want to know why all people missing in this for no reasons. Waiting for all to reply, Email me so that we can talk more rest all sections i got 100% so if needed i can share the solutions. On Sat, Mar 23, 2013 at 3:57 AM, Josh Petro josh.pe...@gmail.com wrote: Good luck and God Bless! On Mar 22, 2013 10:39 AM, Peter Rody peterrodyc...@gmail.com wrote: Hello friends, Ready for the attempt just starting from hotel now its long practice please pray for my attempt. Everyone comes out say i pass its feel so good but i think i might be first guy need your prayers starting from my hotel now. Not able to sleep whole night properly. Feel like on a top of the world now Thanks zillon to all of you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] clock summer-time command
of the list of the commands that dont make much sense, my fav is the clock summer-time .. lots of CCIE experts who passed have said they did the summer time command .. does HK have summer time and do we need to put this command on HK as well? ... in Bahrain we dont have summer, winter, monsoon times .. we follow 1 time :) ..time to take some geography lessons before embarking the CCIE adventures. my question: is this command absolutely necessary? PIXAR ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
