[OSL | CCIE_Voice] IPCC Problem
Hi Experts, I am getting an error i am sorry we r currently facing system problm and r unable t process ur call during CSQ Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IPCC Problem
Hi, whn i call frm PSTN to 2022400 it play the Thank you for calling then Thank You for waiting, we wll connect you with our Agent HQ1 then i am getting MOH audio after that call will goes to Site B Phone 1 and play the prompt as Thank You for waiting, we wll connect you with our Agent SiteB1 and then i am able hear MOH audio .After that i getting i am sorry we r currently facing system problm and r unable t process ur call On Tue, Apr 30, 2013 at 9:26 AM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Thats definitely a wrong script was made however , If you want to update the script make the following steps 1-Edit the script on the UCCX Editor Application 2-Save As anything (the old name same as listed on UCCX Admin) 3-Validate the script on UCCX Editor and make sure its successfully validated 4-Then go to UCCX Admin Script Management - Upload the Script -- Overwrite the Script -- Then Refresh The Script 5-Refresh the Application Script Then you should be good to go Thanks, Hesham On 29 April 2013 23:03, CISCO CCIE VOICE ccievoic...@gmail.com wrote: Hi Experts, I am getting an error i am sorry we r currently facing system problm and r unable t process ur call during CSQ Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IPCC Problem
I am facing the same problem when is use default icd.aef script ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Network hold audio source
Please discard this question, as it is now resolved. The mistake was MRG was not selected in the MRGL :( Thanks. On Tue, Apr 30, 2013 at 10:59 AM, Suresh Bhandari bring...@gmail.comwrote: Sergey, The codec used is g711. IP voice media streaming is set to default, that is, using g711. When I set no MRGL on the DP, there is the default MoH. But when I set DP MRGL to Publisher MoH, and Network hold audio source of the CUCM Telephony CCG to another MoH source (ringback2.wav from uccx server set as alternate MoH/ringback), I hear nothing on the caller when the agent phone is ringing. A simple script (provided by IPExpert for the task) with queue prompt, call hold, 30 sec break for MoH, call unhold is used. Any idea now? On Mon, Apr 29, 2013 at 11:19 PM, Sergey Heyphets ser...@heyphets.comwrote: Not knowing, your environment, just a wild guess that you may be using G729 codec in UCCX, but your IP Voice Streaming Media service is configured (by default) to provide music on hold using G711 codec only. Sergey On Mon, Apr 29, 2013 at 1:01 PM, Suresh Bhandari bring...@gmail.comwrote: Experts! Objective is to provide the caller the ringback tone when it is forwarded to an agent. (5 Lab Workbook lab 4 script) Even after configuring the Network hold audio source for the CM Telephony Group to provide ringback to the caller, caller is not getting it! Followed the steps in the DSG but no avail :( What probably am I missing? -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Suresh Bhandari -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] can i install many phones from pc?
AS i am connected for lab over vpn and trying to register soft clients with cucm...and cme...can i use multiple phones to register? would be work if i have multiple loopback ports of network in system? i created 2 loopback of ethernet in system...each for each soft phone.. can vpn adaptor sue with cipc? please help me if anyone have idea thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] STARTING PRACTICE LAB (8)
I am in On Tue, Apr 30, 2013 at 12:02 AM, Kevin Ronc roncke...@gmail.com wrote: From today i am again starting practise for lab (-8-) if anyone interested please add me in skype my id is ric.terry Mostly want to discuss about H323 Troubleshooting which ciso has added in lab FASTSTART INBOUND / OUTBOUND ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] can i install many phones from pc?
Yes use loopbacks and get multilab IPBLUE softphone, it will work and I believe IPExpert has a write up on it. http://www.ipblue.com/download.asp?product=vtgo Be sure to get the multilab version On Tue, Apr 30, 2013 at 6:38 AM, Amit Sharma aryan231...@gmail.com wrote: AS i am connected for lab over vpn and trying to register soft clients with cucm...and cme...can i use multiple phones to register? would be work if i have multiple loopback ports of network in system? i created 2 loopback of ethernet in system...each for each soft phone.. can vpn adaptor sue with cipc? please help me if anyone have idea thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] can i install many phones from pc?
You can download IPblue softphone. It provides you 5 instances of phones, enough for most of the labs. You can use it as the SCCP phone. For SIP phone, you can use CIPC. On Tue, Apr 30, 2013 at 5:23 PM, Amit Sharma aryan231...@gmail.com wrote: AS i am connected for lab over vpn and trying to register soft clients with cucm...and cme...can i use multiple phones to register? would be work if i have multiple loopback ports of network in system? i created 2 loopback of ethernet in system...each for each soft phone.. can vpn adaptor sue with cipc? please help me if anyone have idea thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] UCCX issue
Hello Experts Silly question, I'm not looking in deep regarding this but let me ask first maybe is something easy to resolve. When I call from PSTN phone to IPCC CSQ (task 9.2 from kevin's videos). I should hear thank you for calling all representative … instead I hear you for calling all representative... Seems like CSQ released the audio very quick and PSTN's Phone gets the audio with delay. best regards AA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June
Eventhough they refresh the HW I don't expect any major changes. I mean I think people will continue to use 28XX series and PVDM2 for a while... Most likely they will upgrade to CUCM 8.6, 9 is still too early on the field. 10 wont be comming out until next year to the customers. The only thing that concerns me, is if they anounce a change, everyone is going to book their last attempts and buyout any remaining spots for the year. Cisco might go for a refresher just to increase demand for spots On Sun, Apr 28, 2013 at 12:02 PM, Bill whl...@gmail.com wrote: If they announce a new version in June you will have about 6 months from then to pass your lab. My recommendation from there is if you have plenty of study/lab time then go for it. If you don't and have to squeeze it in then you might be better off waiting to see. My thought is that 600 to 1200 hours of lab time is needed, more if you spread it out and less if you can focus solely on Cisco voice stuff. Sent from my iPad On Apr 28, 2013, at 12:38 PM, Alex Mendoza aa.mend...@icloud.com wrote: Did you know the official date for new version? I assume that I'll be ready for Sep/oct 2013 Best Regards AA Mendoza Sent from my iPhone On 28/04/2013, at 10:33, Robert Thomas tho...@gmail.com wrote: Hi, I'm thinking on buying a home lab to start my studies. It would run around 3K investment according to my amazon shopping list. However I'm thinking to wait for June and Cisco Live for announcement about the new version. I don't expect major changes on the setup, perhaps some new phone models like 99XX, or 89XX on the phones. And upgrade to the routers 29XX. However I don't expect major new features from the 29XX roll out on the exam. I would appreciate your opinions on this. -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June
I know this can be true. When I took my lab, another version was updating and I talked to one of the guys taking it. he said that all the seats were full for the next 6 weeks. So if he did not pass, he most likely would not get another chance. Not sure what people do, book extra labs just in case? Then what do you do with the extra one if you pass? Oh well, don't have to worry about that. On Tue, Apr 30, 2013 at 8:26 PM, Robert Thomas tho...@gmail.com wrote: Eventhough they refresh the HW I don't expect any major changes. I mean I think people will continue to use 28XX series and PVDM2 for a while... Most likely they will upgrade to CUCM 8.6, 9 is still too early on the field. 10 wont be comming out until next year to the customers. The only thing that concerns me, is if they anounce a change, everyone is going to book their last attempts and buyout any remaining spots for the year. Cisco might go for a refresher just to increase demand for spots On Sun, Apr 28, 2013 at 12:02 PM, Bill whl...@gmail.com wrote: If they announce a new version in June you will have about 6 months from then to pass your lab. My recommendation from there is if you have plenty of study/lab time then go for it. If you don't and have to squeeze it in then you might be better off waiting to see. My thought is that 600 to 1200 hours of lab time is needed, more if you spread it out and less if you can focus solely on Cisco voice stuff. Sent from my iPad On Apr 28, 2013, at 12:38 PM, Alex Mendoza aa.mend...@icloud.com wrote: Did you know the official date for new version? I assume that I'll be ready for Sep/oct 2013 Best Regards AA Mendoza Sent from my iPhone On 28/04/2013, at 10:33, Robert Thomas tho...@gmail.com wrote: Hi, I'm thinking on buying a home lab to start my studies. It would run around 3K investment according to my amazon shopping list. However I'm thinking to wait for June and Cisco Live for announcement about the new version. I don't expect major changes on the setup, perhaps some new phone models like 99XX, or 89XX on the phones. And upgrade to the routers 29XX. However I don't expect major new features from the 29XX roll out on the exam. I would appreciate your opinions on this. -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUE signaling QOS on switch
the way 3750 packet forwarding by using asic which is different from ios router dose, as a result the cli is not supported , use 'show mls qos xxx stat' instead.-ikizoo Date: Wed, 17 Apr 2013 14:46:40 -0700 From: kamina.j...@yahoo.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] CUE signaling QOS on switch on one of the practice lab the need is to police the signaling packets to and from CUE inbound into the HQ switch to 32 kbps and then remark the DSCP to 0. I built up the config below but dont see any packets matched on the show policy-map interface command. CUE IP is 10.1.6.253 . CUCM IP is 10.10.210.10 (pub) and 10.10.210.11 (sub) .is the access list built correctly? access-list 110 permit tcp host 10.1.6.253 any eq 2748 ! class-map match-all CUE-SIGNAL match access-group 110 ! policy-map CUEMAP class cti-qbe set dscp af31 bandwidth 20 ! interface Fa0/1/0 description HQ-ROUTER-INTERFACE service-policy input CUEMAP mls qosmls qos map cos 0 8 16 24 32 46 48 56mls qos map policed-dscp 24 26 to 8 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!!
I don't think you go for the ICT of the H323 Gateway. The recommendation is a H225 Trunk. When you create a new trunk you have multiple options: ICT GK controlled, ICT non GK controlled and H255 Trunk. I would go for the last. On Thu, Apr 25, 2013 at 12:55 PM, ikizoo hello ikiz...@hotmail.com wrote: i have different perspective,, according to cisco recommendation ICT is only for between 2 CUCM clusters, and lab requirement saying POC of H323 trunk for PSTN access. so i would choose GW instead. -ikizoo -- From: mmac...@bcbsal.org To: networksanitytoinsan...@gmail.com; ccie_voice@onlinestudylist.com Date: Thu, 25 Apr 2013 08:23:21 -0500 Subject: Re: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!! 1)The question says trunk so it must be a trunk (inter cluster trunk) 2) that’s more difficult. Usually it’s a codec mismatch. And is found in the trace ( I forget exact wording you are looking for). Hopefully someone else can provide better detail. *M* *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *sanity insanity *Sent:* Thursday, April 25, 2013 12:00 AM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!! hi All, I have a few questions in relation to H323 troubleshooting We are required to provision a proof of concept (POC) H323 trunk between CUCM and voip service provider . The cucm should send H323 traffic to service provider on ip address XX.XX.XX.XX (public Ip address) . This call should be available for HQ Phones only. Inbound H.323 calls from VoIP service provider is not needed for the PoC test. Questions :- 1) Should we use a H323 gateway or H323 trunk ( no gatekeeper controlled) to achieve the above requirement? 2) If we need provide the appropriate debug or traces to verify whether or not No way audio instances prevalent for HQ Phones . Then what do we look for in the logs ? Thanks , MJ ***CONFIDENTIALITY NOTICE*** This e-mail is intended for the sole use of the individual(s) to whom it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. You are hereby notified that any dissemination, duplication, or distribution of this transmission by someone other than the intended addressee or its designated agent is strictly prohibited. If you receive this e-mail in error, please notify me immediately by replying to this e-mail. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
As far I was aware those parameters are just for 6608 GW running as MGCP.
You should not be using those for auto config.
Basically if you want to configure a fractional, just throug the command
manually and modify the timeslots when you configure your pri-group.
On Sun, Apr 28, 2013 at 4:09 AM, Suresh Bhandari bring...@gmail.com wrote:
I believe that when you configure fractional PRI from IOS, and if you have
to expand the channels later, you have to reconfigure mgcp... that is you
have to shut your voice port, controller, bind-l3 command in the D-channel
etc
On the other hand, if you have busy out the channels from the UCM, you can
simply change the channels to required numbers, and save the service
parameter.
Please update if there are other, must be there, benefits.
HTH | TIA
On Sun, Apr 28, 2013 at 4:50 PM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
What is the purpose of doing busy out channels from 7-23 if we are its
not using Fractional PRI ,If we are busy out channel from 7-23 which means
that we are using only 6 channels so its a fractional PRI line
Please Experts correct us on ths...
Thanks
On Sun, Apr 28, 2013 at 11:28 AM, Suresh Bhandari bring...@gmail.comwrote:
If you are busying out the channels in CUCM using automatic mgcp
configuration, it will not be Fractional PRI... Experts, please correct me
if I am wrong!
On Sun, Apr 28, 2013 at 2:01 PM, CISCO CCIE VOICE ccievoic...@gmail.com
wrote:
HI Thanks Again, So i can use Fractional T1/E1 PRI with Automatic
MGCP Configuration?
On Sun, Apr 28, 2013 at 10:56 AM, Suresh Bhandari
bring...@gmail.comwrote:
Regarding your question about busyout channels in CUCM, you will use
the MGCP gateway address as appeared in your CUCM gateway page and busyout
channels using 1.
You can find a good example by clicking the parameter.
For your reference, for say your SA site, the SP Change B-Channel
Maintenance Status 1 will be S0/SU0/DS1-0@*SA-RTR* = 0011
to busyout channels 7-23.
Notice the boldface text that represents your gateway.
Further, you have to check Enable status Poll in your gateway page.
Hope this helps.
On Sun, Apr 28, 2013 at 12:45 PM, CISCO CCIE VOICE
ccievoic...@gmail.com wrote:
HI Thanks,
but if suppose i want to use 6 channel from T1 PRI on HQ Router and
12 channel of E1 PRI from Branch-2 router,so how can i busy out channels
under service parameter ? and how does CUCM knows about which router
interface to busy out as i have two site with different fractional PRI
Any reference or document on ths will be g8rt help...
thanks
On Sun, Apr 28, 2013 at 9:46 AM, Mohamed Gazzaz
mgaz...@hotmail.comwrote:
Pick up whatever method you are comfortable with and
practice, practice. practice ..
Try both methods and see which one is faster for you.
--
Date: Sun, 28 Apr 2013 09:10:30 +0300
From: ccievoic...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
Hi Experts
Which method to be use in CCIE Voice lab exam in order to configure
MGCP Auto or Manually.
Thanks
___ For more information
regarding industry leading CCIE Lab training, please visit
www.ipexpert.com Are you a CCNP or CCIE and looking for a job?
Check out www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
Suresh Bhandari
--
Suresh Bhandari
--
Suresh Bhandari
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
Robert Thomas Zamora
tho...@gmail.com +50689389544
http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
CCNP, CCNP Voice
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
[OSL | CCIE_Voice] Lab for sale
So after passing my lab, my home lab is sitting idle.. I am located in Canada, if there are any takers feel free to reach out. Cheers Leslie ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June
Robert, Robert my good advice for you. But the lab with the highest end Server something like DELL POWER EDGE V3 which has 64 gb rams and 4 TB hard drives the server will be valid for any other application you want. CUCM Cluster V9 , Microsoft Server 2012 , Exchange 2013 and LYNC 2013. Make sure your server is powerful in the first place and that will not cost you more than $950 from ebay.com. For the routers and switches If you bought it as components and you would like to sell it as component it will still sell slightly more or less than the price you get. I see don't hesitate just buy your homelab nowadays from ebay.com and Never give up. If you have only this year for this current version then keep calm and carry on. Study and If you didn't pass schedule a test every 30 days exactly till the abolishment date. You will find a spot somewhere for sure whether in SJC , RTP , Europe , Dubai and it worth to travel if needed. We have to struggle for something which will give us the lifeline and CCIE is a big lifeline for many people not necessarily R/S as it lost it's value in the market already but CCIE Voice is unique and demanded and if you invested 20K for lab equipment , lab attempts , workbooks and etc. believe me you will get compensated right away as soon as you achieve it. If you value in the market now 80K - 120K with your current experience + CCVP then when you become CCIE V you will get a job for 150K or 150K+ then its worth it its lifetime investment do it mate. Thanks, Hesham On 30 April 2013 18:35, Bill Lake whl...@gmail.com wrote: I know this can be true. When I took my lab, another version was updating and I talked to one of the guys taking it. he said that all the seats were full for the next 6 weeks. So if he did not pass, he most likely would not get another chance. Not sure what people do, book extra labs just in case? Then what do you do with the extra one if you pass? Oh well, don't have to worry about that. On Tue, Apr 30, 2013 at 8:26 PM, Robert Thomas tho...@gmail.com wrote: Eventhough they refresh the HW I don't expect any major changes. I mean I think people will continue to use 28XX series and PVDM2 for a while... Most likely they will upgrade to CUCM 8.6, 9 is still too early on the field. 10 wont be comming out until next year to the customers. The only thing that concerns me, is if they anounce a change, everyone is going to book their last attempts and buyout any remaining spots for the year. Cisco might go for a refresher just to increase demand for spots On Sun, Apr 28, 2013 at 12:02 PM, Bill whl...@gmail.com wrote: If they announce a new version in June you will have about 6 months from then to pass your lab. My recommendation from there is if you have plenty of study/lab time then go for it. If you don't and have to squeeze it in then you might be better off waiting to see. My thought is that 600 to 1200 hours of lab time is needed, more if you spread it out and less if you can focus solely on Cisco voice stuff. Sent from my iPad On Apr 28, 2013, at 12:38 PM, Alex Mendoza aa.mend...@icloud.com wrote: Did you know the official date for new version? I assume that I'll be ready for Sep/oct 2013 Best Regards AA Mendoza Sent from my iPhone On 28/04/2013, at 10:33, Robert Thomas tho...@gmail.com wrote: Hi, I'm thinking on buying a home lab to start my studies. It would run around 3K investment according to my amazon shopping list. However I'm thinking to wait for June and Cisco Live for announcement about the new version. I don't expect major changes on the setup, perhaps some new phone models like 99XX, or 89XX on the phones. And upgrade to the routers 29XX. However I don't expect major new features from the 29XX roll out on the exam. I would appreciate your opinions on this. -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a
[OSL | CCIE_Voice] Lab IP Routing
Hi everyone, I'm sorry for asking this question, but it hit me a little while ago that for the most part, routing via OSPF is setup on most (if not all) of the practice labs. Is that the case in the real lab? I'm trying to make sure I don't need to brush up on my OSPF commands prior to my attempt. I know the previous versions of the lab had more IP routing in them, but I wasn't sure what this version was like. Also, I'm assuming our connection to the lab is via console cable and there is no way to telnet to the gateways, correct? Reason I ask is because we're always talking about speed and whatnot and 9600 baud isn't exactly what you'd want so I've been practicing my command line switches for finding the correct running-config commands. Any info (without breaking NDA) is appreciate. Josh ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June
The system only allow one booking per time. On Apr 30, 2013 10:02 PM, Bill Lake whl...@gmail.com wrote: I know this can be true. When I took my lab, another version was updating and I talked to one of the guys taking it. he said that all the seats were full for the next 6 weeks. So if he did not pass, he most likely would not get another chance. Not sure what people do, book extra labs just in case? Then what do you do with the extra one if you pass? Oh well, don't have to worry about that. On Tue, Apr 30, 2013 at 8:26 PM, Robert Thomas tho...@gmail.com wrote: Eventhough they refresh the HW I don't expect any major changes. I mean I think people will continue to use 28XX series and PVDM2 for a while... Most likely they will upgrade to CUCM 8.6, 9 is still too early on the field. 10 wont be comming out until next year to the customers. The only thing that concerns me, is if they anounce a change, everyone is going to book their last attempts and buyout any remaining spots for the year. Cisco might go for a refresher just to increase demand for spots On Sun, Apr 28, 2013 at 12:02 PM, Bill whl...@gmail.com wrote: If they announce a new version in June you will have about 6 months from then to pass your lab. My recommendation from there is if you have plenty of study/lab time then go for it. If you don't and have to squeeze it in then you might be better off waiting to see. My thought is that 600 to 1200 hours of lab time is needed, more if you spread it out and less if you can focus solely on Cisco voice stuff. Sent from my iPad On Apr 28, 2013, at 12:38 PM, Alex Mendoza aa.mend...@icloud.com wrote: Did you know the official date for new version? I assume that I'll be ready for Sep/oct 2013 Best Regards AA Mendoza Sent from my iPhone On 28/04/2013, at 10:33, Robert Thomas tho...@gmail.com wrote: Hi, I'm thinking on buying a home lab to start my studies. It would run around 3K investment according to my amazon shopping list. However I'm thinking to wait for June and Cisco Live for announcement about the new version. I don't expect major changes on the setup, perhaps some new phone models like 99XX, or 89XX on the phones. And upgrade to the routers 29XX. However I don't expect major new features from the 29XX roll out on the exam. I would appreciate your opinions on this. -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June
Also , It's good to mention that if you've decided to wait for a new version. You have to wait for a very long time at least a year after the new version released. As you must wait for a new workbook versions as well as you need to consult people who took and passed the new version so that will never be in a couple of months and you talkin' at least a year for things to get cleared to you if you will wait for a new version so you talkin' about 2 years from now to make your first attempt. I see go ahead look for the equipment right this minute , Practice and Study and good luck On 30 April 2013 19:12, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Robert, Robert my good advice for you. But the lab with the highest end Server something like DELL POWER EDGE V3 which has 64 gb rams and 4 TB hard drives the server will be valid for any other application you want. CUCM Cluster V9 , Microsoft Server 2012 , Exchange 2013 and LYNC 2013. Make sure your server is powerful in the first place and that will not cost you more than $950 from ebay.com. For the routers and switches If you bought it as components and you would like to sell it as component it will still sell slightly more or less than the price you get. I see don't hesitate just buy your homelab nowadays from ebay.com and Never give up. If you have only this year for this current version then keep calm and carry on. Study and If you didn't pass schedule a test every 30 days exactly till the abolishment date. You will find a spot somewhere for sure whether in SJC , RTP , Europe , Dubai and it worth to travel if needed. We have to struggle for something which will give us the lifeline and CCIE is a big lifeline for many people not necessarily R/S as it lost it's value in the market already but CCIE Voice is unique and demanded and if you invested 20K for lab equipment , lab attempts , workbooks and etc. believe me you will get compensated right away as soon as you achieve it. If you value in the market now 80K - 120K with your current experience + CCVP then when you become CCIE V you will get a job for 150K or 150K+ then its worth it its lifetime investment do it mate. Thanks, Hesham On 30 April 2013 18:35, Bill Lake whl...@gmail.com wrote: I know this can be true. When I took my lab, another version was updating and I talked to one of the guys taking it. he said that all the seats were full for the next 6 weeks. So if he did not pass, he most likely would not get another chance. Not sure what people do, book extra labs just in case? Then what do you do with the extra one if you pass? Oh well, don't have to worry about that. On Tue, Apr 30, 2013 at 8:26 PM, Robert Thomas tho...@gmail.com wrote: Eventhough they refresh the HW I don't expect any major changes. I mean I think people will continue to use 28XX series and PVDM2 for a while... Most likely they will upgrade to CUCM 8.6, 9 is still too early on the field. 10 wont be comming out until next year to the customers. The only thing that concerns me, is if they anounce a change, everyone is going to book their last attempts and buyout any remaining spots for the year. Cisco might go for a refresher just to increase demand for spots On Sun, Apr 28, 2013 at 12:02 PM, Bill whl...@gmail.com wrote: If they announce a new version in June you will have about 6 months from then to pass your lab. My recommendation from there is if you have plenty of study/lab time then go for it. If you don't and have to squeeze it in then you might be better off waiting to see. My thought is that 600 to 1200 hours of lab time is needed, more if you spread it out and less if you can focus solely on Cisco voice stuff. Sent from my iPad On Apr 28, 2013, at 12:38 PM, Alex Mendoza aa.mend...@icloud.com wrote: Did you know the official date for new version? I assume that I'll be ready for Sep/oct 2013 Best Regards AA Mendoza Sent from my iPhone On 28/04/2013, at 10:33, Robert Thomas tho...@gmail.com wrote: Hi, I'm thinking on buying a home lab to start my studies. It would run around 3K investment according to my amazon shopping list. However I'm thinking to wait for June and Cisco Live for announcement about the new version. I don't expect major changes on the setup, perhaps some new phone models like 99XX, or 89XX on the phones. And upgrade to the routers 29XX. However I don't expect major new features from the 29XX roll out on the exam. I would appreciate your opinions on this. -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information
Re: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!!
Just configure it as an h323 gateway, it is still a trunk and it is the shortest distance between two points. From: Robert Thomas tho...@gmail.commailto:tho...@gmail.com Date: Tuesday, April 30, 2013 9:00 PM To: ikizoo hello ikiz...@hotmail.commailto:ikiz...@hotmail.com Cc: ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com, sanity insanity networksanitytoinsan...@gmail.commailto:networksanitytoinsan...@gmail.com Subject: Re: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!! I don't think you go for the ICT of the H323 Gateway. The recommendation is a H225 Trunk. When you create a new trunk you have multiple options: ICT GK controlled, ICT non GK controlled and H255 Trunk. I would go for the last. On Thu, Apr 25, 2013 at 12:55 PM, ikizoo hello ikiz...@hotmail.commailto:ikiz...@hotmail.com wrote: i have different perspective,, according to cisco recommendation ICT is only for between 2 CUCM clusters, and lab requirement saying POC of H323 trunk for PSTN access. so i would choose GW instead. -ikizoo From: mmac...@bcbsal.orgmailto:mmac...@bcbsal.org To: networksanitytoinsan...@gmail.commailto:networksanitytoinsan...@gmail.com; ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com Date: Thu, 25 Apr 2013 08:23:21 -0500 Subject: Re: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!! 1)The question says trunk so it must be a trunk (inter cluster trunk) 2) that’s more difficult. Usually it’s a codec mismatch. And is found in the trace ( I forget exact wording you are looking for). Hopefully someone else can provide better detail. M From:ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of sanity insanity Sent: Thursday, April 25, 2013 12:00 AM To: ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!! hi All, I have a few questions in relation to H323 troubleshooting We are required to provision a proof of concept (POC) H323 trunk between CUCM and voip service provider . The cucm should send H323 traffic to service provider on ip address XX.XX.XX.XX (public Ip address) . This call should be available for HQ Phones only. Inbound H.323 calls from VoIP service provider is not needed for the PoC test. Questions :- 1) Should we use a H323 gateway or H323 trunk ( no gatekeeper controlled) to achieve the above requirement? 2) If we need provide the appropriate debug or traces to verify whether or not No way audio instances prevalent for HQ Phones . Then what do we look for in the logs ? Thanks , MJ ***CONFIDENTIALITY NOTICE*** This e-mail is intended for the sole use of the individual(s) to whom it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. You are hereby notified that any dissemination, duplication, or distribution of this transmission by someone other than the intended addressee or its designated agent is strictly prohibited. If you receive this e-mail in error, please notify me immediately by replying to this e-mail. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com -- Robert Thomas Zamora tho...@gmail.commailto:tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June
Thanks for the Advise. CCIE salary expectations vary on time and they also vary on Geography. Currently a CCNP in CR (Costa Rica) makes somewhere 25K a year. (Yeah we are cheap, perhaps not as cheap as India) and a CCIE makes somewhere aroun 50K a year. You can leave pretty decently on this country anywhere above the 20K. I'm planning to buy the whole Routers, Switch, PVDM2 and so on, just like the lab. Perhaps I might skip over the 4ESW modules. For the server I'm planning to use my good old I7, 24GB RAM Desktop, that has suite me well. Eventhoug Cisco refresh to CUCM and go ballistic, with a 2 Cluster Setup and multiple products, I don't think they will go beyond the 32GB ball park. Specially looking at the UCS TRC, and the B6K, so people have equipment to play with. One of the factor cost is shipping large stuff, like servers became a logistic hassle. Routers and SW, and small parts are easy to transit through customs. On Tue, Apr 30, 2013 at 7:19 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Also , It's good to mention that if you've decided to wait for a new version. You have to wait for a very long time at least a year after the new version released. As you must wait for a new workbook versions as well as you need to consult people who took and passed the new version so that will never be in a couple of months and you talkin' at least a year for things to get cleared to you if you will wait for a new version so you talkin' about 2 years from now to make your first attempt. I see go ahead look for the equipment right this minute , Practice and Study and good luck On 30 April 2013 19:12, Hesham Abdelkereem heshamcentr...@gmail.comwrote: Robert, Robert my good advice for you. But the lab with the highest end Server something like DELL POWER EDGE V3 which has 64 gb rams and 4 TB hard drives the server will be valid for any other application you want. CUCM Cluster V9 , Microsoft Server 2012 , Exchange 2013 and LYNC 2013. Make sure your server is powerful in the first place and that will not cost you more than $950 from ebay.com. For the routers and switches If you bought it as components and you would like to sell it as component it will still sell slightly more or less than the price you get. I see don't hesitate just buy your homelab nowadays from ebay.com and Never give up. If you have only this year for this current version then keep calm and carry on. Study and If you didn't pass schedule a test every 30 days exactly till the abolishment date. You will find a spot somewhere for sure whether in SJC , RTP , Europe , Dubai and it worth to travel if needed. We have to struggle for something which will give us the lifeline and CCIE is a big lifeline for many people not necessarily R/S as it lost it's value in the market already but CCIE Voice is unique and demanded and if you invested 20K for lab equipment , lab attempts , workbooks and etc. believe me you will get compensated right away as soon as you achieve it. If you value in the market now 80K - 120K with your current experience + CCVP then when you become CCIE V you will get a job for 150K or 150K+ then its worth it its lifetime investment do it mate. Thanks, Hesham On 30 April 2013 18:35, Bill Lake whl...@gmail.com wrote: I know this can be true. When I took my lab, another version was updating and I talked to one of the guys taking it. he said that all the seats were full for the next 6 weeks. So if he did not pass, he most likely would not get another chance. Not sure what people do, book extra labs just in case? Then what do you do with the extra one if you pass? Oh well, don't have to worry about that. On Tue, Apr 30, 2013 at 8:26 PM, Robert Thomas tho...@gmail.com wrote: Eventhough they refresh the HW I don't expect any major changes. I mean I think people will continue to use 28XX series and PVDM2 for a while... Most likely they will upgrade to CUCM 8.6, 9 is still too early on the field. 10 wont be comming out until next year to the customers. The only thing that concerns me, is if they anounce a change, everyone is going to book their last attempts and buyout any remaining spots for the year. Cisco might go for a refresher just to increase demand for spots On Sun, Apr 28, 2013 at 12:02 PM, Bill whl...@gmail.com wrote: If they announce a new version in June you will have about 6 months from then to pass your lab. My recommendation from there is if you have plenty of study/lab time then go for it. If you don't and have to squeeze it in then you might be better off waiting to see. My thought is that 600 to 1200 hours of lab time is needed, more if you spread it out and less if you can focus solely on Cisco voice stuff. Sent from my iPad On Apr 28, 2013, at 12:38 PM, Alex Mendoza aa.mend...@icloud.com wrote: Did you know the official date for new version? I assume that I'll be ready for Sep/oct 2013 Best
Re: [OSL | CCIE_Voice] Lab IP Routing
Josh, As a piece of advise, I would have some basic level of troubleshooting regarding OSPF and routing. I have heard instances of interfaces or loopbacks that might not be reachable from the default config. Although you don't want to spend a whole lot of time on this, I would expect a CCIE to have some basic level of config and troubleshooting should something not have connectivity. Again the type of issues that could be induced in the lab are very limited. On Tue, Apr 30, 2013 at 7:12 PM, Josh Petro josh.pe...@gmail.com wrote: Hi everyone, I'm sorry for asking this question, but it hit me a little while ago that for the most part, routing via OSPF is setup on most (if not all) of the practice labs. Is that the case in the real lab? I'm trying to make sure I don't need to brush up on my OSPF commands prior to my attempt. I know the previous versions of the lab had more IP routing in them, but I wasn't sure what this version was like. Also, I'm assuming our connection to the lab is via console cable and there is no way to telnet to the gateways, correct? Reason I ask is because we're always talking about speed and whatnot and 9600 baud isn't exactly what you'd want so I've been practicing my command line switches for finding the correct running-config commands. Any info (without breaking NDA) is appreciate. Josh ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IPCC Problem
You get this greeting whenever your script throws out an exception. I would reactive debug it and look at what step is failing. Who knows, perhaps you missed a setting on the CSQ so the script is finding itself unavailable to route the call to the agent and throwing an exception to you. On Mon, Apr 29, 2013 at 11:39 PM, CISCO CCIE VOICE ccievoic...@gmail.comwrote: Hi, whn i call frm PSTN to 2022400 it play the Thank you for calling then Thank You for waiting, we wll connect you with our Agent HQ1 then i am getting MOH audio after that call will goes to Site B Phone 1 and play the prompt as Thank You for waiting, we wll connect you with our Agent SiteB1 and then i am able hear MOH audio .After that i getting i am sorry we r currently facing system problm and r unable t process ur call On Tue, Apr 30, 2013 at 9:26 AM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Thats definitely a wrong script was made however , If you want to update the script make the following steps 1-Edit the script on the UCCX Editor Application 2-Save As anything (the old name same as listed on UCCX Admin) 3-Validate the script on UCCX Editor and make sure its successfully validated 4-Then go to UCCX Admin Script Management - Upload the Script -- Overwrite the Script -- Then Refresh The Script 5-Refresh the Application Script Then you should be good to go Thanks, Hesham On 29 April 2013 23:03, CISCO CCIE VOICE ccievoic...@gmail.com wrote: Hi Experts, I am getting an error i am sorry we r currently facing system problm and r unable t process ur call during CSQ Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Lab IP Routing
Josh, For the OSPF question, my current plan is to issue the below as part of a base config on all routers to make sure I'm advertising the local networks and hopefully negate any built-in troubleshooting for the routing piece: router ospf 1 network 0.0.0.0 area 0 I'm interested to hear others opinions though. Marty On Tue, Apr 30, 2013 at 10:12 PM, Josh Petro josh.pe...@gmail.com wrote: Hi everyone, I'm sorry for asking this question, but it hit me a little while ago that for the most part, routing via OSPF is setup on most (if not all) of the practice labs. Is that the case in the real lab? I'm trying to make sure I don't need to brush up on my OSPF commands prior to my attempt. I know the previous versions of the lab had more IP routing in them, but I wasn't sure what this version was like. Also, I'm assuming our connection to the lab is via console cable and there is no way to telnet to the gateways, correct? Reason I ask is because we're always talking about speed and whatnot and 9600 baud isn't exactly what you'd want so I've been practicing my command line switches for finding the correct running-config commands. Any info (without breaking NDA) is appreciate. Josh ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
