Re: [OSL | CCIE_Voice] directory handler in Unity connection
I think you don't have first name defined on the end user page of cucm.. you might have defined only last name.check this first.. Thanks and regards, Piyush Jain Sent from my android device. -Original Message- From: Karen Johnson karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wed, 03 Jul 2013 11:16 AM Subject: [OSL | CCIE_Voice] directory handler in Unity connection folks, when i use Directory handler in CUC and press 'First Name. CUC can't find it. is that anticipated and if not what i missed in config? - what is the keys to switch to extension search ? tks K___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?
Thanks Karen. They replaced the vouchers with new ones. Regards. Khaled Date: Tue, 2 Jul 2013 22:13:31 -0700 From: karen.johnson...@yahoo.ca Subject: Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? To: khaled_sah...@hotmail.com; dwar...@epochuniversal.com; ccie_voice@onlinestudylist.com CC: supp...@ipexpert.com; supp...@proctorlabs.com try to email to Wayne and if not post to BBB From: khaled Saholy khaled_sah...@hotmail.com To: Karen Johnson karen.johnson...@yahoo.ca; Dane Warner dwar...@epochuniversal.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Cc: support (supp...@ipexpert.com) supp...@ipexpert.com; supp...@proctorlabs.com supp...@proctorlabs.com Sent: Monday, July 1, 2013 7:09:33 AM Subject: RE: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? It seems nobody cares! It's very disappointing. Date: Sun, 30 Jun 2013 12:49:25 -0700 From: karen.johnson...@yahoo.ca Subject: Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? To: dwar...@epochuniversal.com; khaled_sah...@hotmail.com; ccie_voice@onlinestudylist.com CC: supp...@ipexpert.com; supp...@proctorlabs.com i can not power up most server and sometimes vpn also failed to work. but when u open ticket , suppprt usually our end is good , please check your side. From: Dane Warner dwar...@epochuniversal.com To: khaled Saholy khaled_sah...@hotmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Cc: support (supp...@ipexpert.com) supp...@ipexpert.com; supp...@proctorlabs.com supp...@proctorlabs.com Sent: Sunday, June 30, 2013 1:07:41 PM Subject: Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? All, I had a very frustrating session this morning. I could not login to the Publisher, even though I could connect with the browser. Didn’t work in IE or Firefox. I could log into the subscriber but saw that there was a configuration already loaded. When I tried to save any changes, just got ‘Connecting’ in the browser, no further. Never could do anything with CallManager. I reverted and loaded two other labs, same issue. It seems the Pod29 was extremely messed up. Saturday’s session loaded a completely different lab from the one I requested. Had to revert and load again, 25 minutes down the drain. Proctorlabs Support, I am requesting two vouchers for the 8 hour session that I couldn’t work on. There are some serious bugs in your lab gear. Regards, Dane Warner, CCVPSr. Network EngineerEpoch Universal, Inc.(909)226-0755dwar...@epochuniversal.comFrom: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of khaled Saholy Sent: Sunday, June 30, 2013 11:08 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? Hi All, I don't know what to say or whom to complain to? This's the second day I'm having difficulty in working in my online sessions with Proctorlabs vracks. I contacted supp...@ipexpert.com and supp...@proctorlabs.com and afterhours support but no one answering Yesterday I asked the support if I can extend my current session by booking a new following session but no one answered. I tried booking a new following session hoping it will be linked up automatically but unfortunately it didn't. So after that I had to stop my work after feeling frustrated. Today I booked three consecutive sessions but the same problem happened again but in a different form. I noticed the remaining time is 3 hrs and 40 minutes in the first session and informed the support guys but no one is answering. After finishing my first session, I thought it will be disconnected but the remaining time changed to 24 hours. Okay feeling happy with the new hours but then maybe after about 30 minutes I found my telnet session got disconnected and I can't access them or access the servers and after refreshing my account at Proctorlabs site , I found the pod has changed. So means everything has gone. The sessions were not linked-up as what they told us. I just wonder whom to complain in such cases? BTW,I also schedule sessions in the other competitor company vracks but to say the truth I found their support and response are very good. Not only that but they gave me back my credits and more. Thanks for any help and regards. Khaled Al-Saholy No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3345 / Virus Database: 3204/6445 - Release Date: 06/27/13 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more
[OSL | CCIE_Voice] Channel Selection Order
Hi Guys, I am trying to understand the Channel selection order, i know that if TELCo is using bottom Up then i have to use opposite Direction i.e Top Down .My Telco is uses last channel for IN-bound calls and set Top down on my side for OUT-bound calls but still i can see that its taking bottom up for out bound calls,so did i miss any thing ? can any one share there knowledge and experience as to how i can configure it Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Channel Selection Order
Thanks for ur reply,Usually the order configured in Cisco CallManager for outbound calls is the opposite of the Telco for inbound calls in order to increase the likelihood of available channels. On Wed, Jul 3, 2013 at 12:29 PM, LorenzLGRC lorenzl...@gmail.com wrote: Hello, as far as i know the B channel selection order is not bound to your telco configuration. You can set top-down or bottom-up with no issue at all. hth lorenz On Wed, Jul 3, 2013 at 10:58 AM, CISCO CCIE VOICE ccievoic...@gmail.comwrote: Hi Guys, I am trying to understand the Channel selection order, i know that if TELCo is using bottom Up then i have to use opposite Direction i.e Top Down .My Telco is uses last channel for IN-bound calls and set Top down on my side for OUT-bound calls but still i can see that its taking bottom up for out bound calls,so did i miss any thing ? can any one share there knowledge and experience as to how i can configure it Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] directory handler in Unity connection
Delete from cuc and then re import. Best Regards, Piyush Jain Sent from my android device. -Original Message- From: Karen Johnson karen.johnson...@yahoo.ca To: jainpiyush2...@ymail.com jainpiyush2...@ymail.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wed, 03 Jul 2013 6:33 PM Subject: Re: [OSL | CCIE_Voice] directory handler in Unity connection yes, i have not assigned first name, now i am going to re-import from UCM user, but can't - do you know how to re-import UCM user to CUC ? tks K From: jainpiyush2...@ymail.com jainpiyush2...@ymail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Karen Johnson karen.johnson...@yahoo.ca Sent: Tuesday, July 2, 2013 11:53:15 PM Subject: Re: [OSL | CCIE_Voice] directory handler in Unity connection I think you don't have first name defined on the end user page of cucm.. you might have defined only last name.check this first.. Thanks and regards, Piyush Jain Sent from my android device. -Original Message- From: Karen Johnson karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wed, 03 Jul 2013 11:16 AM Subject: [OSL | CCIE_Voice] directory handler in Unity connection folks, when i use Directory handler in CUC and press 'First Name. CUC can't find it. is that anticipated and if not what i missed in config? - what is the keys to switch to extension search ? tks K___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] directory handler in Unity connection
yes it work with first name, tks lot. - but is it also work when we said it (not by pressing 47 for HQ) ? K From: jainpiyush2...@ymail.com jainpiyush2...@ymail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Karen Johnson karen.johnson...@yahoo.ca Sent: Wednesday, July 3, 2013 7:10:16 AM Subject: Re: [OSL | CCIE_Voice] directory handler in Unity connection Delete from cuc and then re import. Best Regards, Piyush Jain Sent from my android device. -Original Message- From: Karen Johnson karen.johnson...@yahoo.ca To: jainpiyush2...@ymail.com jainpiyush2...@ymail.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wed, 03 Jul 2013 6:33 PM Subject: Re: [OSL | CCIE_Voice] directory handler in Unity connection yes, i have not assigned first name, now i am going to re-import from UCM user, but can't - do you know how to re-import UCM user to CUC ? tks K From: jainpiyush2...@ymail.com jainpiyush2...@ymail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Karen Johnson karen.johnson...@yahoo.ca Sent: Tuesday, July 2, 2013 11:53:15 PM Subject: Re: [OSL | CCIE_Voice] directory handler in Unity connection I think you don't have first name defined on the end user page of cucm.. you might have defined only last name.check this first.. Thanks and regards, Piyush Jain Sent from my android device. -Original Message- From: Karen Johnson karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wed, 03 Jul 2013 11:16 AM Subject: [OSL | CCIE_Voice] directory handler in Unity connection folks, when i use Directory handler in CUC and press 'First Name. CUC can't find it. is that anticipated and if not what i missed in config? - what is the keys to switch to extension search ? tks K___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] directory handler in Unity connection
yes, i have not assigned first name, now i am going to re-import from UCM user, but can't - do you know how to re-import UCM user to CUC ? tks K From: jainpiyush2...@ymail.com jainpiyush2...@ymail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Karen Johnson karen.johnson...@yahoo.ca Sent: Tuesday, July 2, 2013 11:53:15 PM Subject: Re: [OSL | CCIE_Voice] directory handler in Unity connection I think you don't have first name defined on the end user page of cucm.. you might have defined only last name.check this first.. Thanks and regards, Piyush Jain Sent from my android device. -Original Message- From: Karen Johnson karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wed, 03 Jul 2013 11:16 AM Subject: [OSL | CCIE_Voice] directory handler in Unity connection folks, when i use Directory handler in CUC and press 'First Name. CUC can't find it. is that anticipated and if not what i missed in config? - what is the keys to switch to extension search ? tks K___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] TFTP issue
hi Brian, I have similar issue again, and this time even though http://172.120.64.10:6970/sb.txt and from OS admin file is there. I still can't pull it from Router by copy tftp flash . any idea ? tks K From: Brian Meade bmead...@vt.edu To: Karen Johnson karen.johnson...@yahoo.ca Sent: Monday, June 3, 2013 7:57:01 PM Subject: Re: [OSL | CCIE_Voice] TFTP issue Karen, I mean the actual TFTP client your browser maps the tftp url to. Thanks, Brian On Jun 3, 2013 9:55 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: Hi Brian, This is callmanager tftp, do you know what possible wrong setting here? K From: Brian Meade bmead...@vt.edu; To: Karen Johnson karen.johnson...@yahoo.ca; Subject: Re: [OSL | CCIE_Voice] TFTP issue Sent: Mon, Jun 3, 2013 11:46:05 PM Karen, It may just be an issue with the way you have your TFTP application set up. I always just use the HTTP method as it always works in all browsers. Thanks, Brian On Mon, Jun 3, 2013 at 7:38 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: thanks lot Brian, since I use http://172.120.64.10:6970/sb.txt all of the files that I upliad always work now. Hmm, curious why we need to trigger it like above ? From: Brian Meade bmead...@vt.edu To: ccie_voice@onlinestudylist.com Sent: Monday, June 3, 2013 10:18:30 AM Subject: Re: [OSL | CCIE_Voice] TFTP issue Karen, Try going to http://172.120.64.10:6970/sb.txt If that doesn't work, check http://172.160.64.10:6970/filelist.txt to see if that file is even listed. Thanks, Brian Date: Mon, 3 Jun 2013 07:37:14 -0700 (PDT) From: Karen Johnson karen.johnson...@yahoo.ca To: michael.se...@compucom.com michael.se...@compucom.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] TFTP issue Message-ID: 1370270234.47005.yahoomail...@web163904.mail.gq1.yahoo.com Content-Type: text/plain; charset=iso-8859-1 tks Mike, ? has anyone ever has issue , when upload file to UCM TFTP and restart the TFTP service.?? (Even reload the UCM) But when I try to download from UCM , it said failed not there. ? %Error opening tftp://172.120.64.10/sb.txt (No such file or directory) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] TFTP issue
Karen, You probably want to try restarting the TFTP service. If that doesn't work, try deleting and re-uploading the file. Thanks, Brian On Wed, Jul 3, 2013 at 9:44 AM, Karen Johnson karen.johnson...@yahoo.cawrote: hi Brian, I have similar issue again, and this time even though http://172.120.64.10:6970/sb.txt and from OS admin file is there. I still can't pull it from Router by copy tftp flash . any idea ? tks K -- *From:* Brian Meade bmead...@vt.edu *To:* Karen Johnson karen.johnson...@yahoo.ca *Sent:* Monday, June 3, 2013 7:57:01 PM *Subject:* Re: [OSL | CCIE_Voice] TFTP issue Karen, I mean the actual TFTP client your browser maps the tftp url to. Thanks, Brian On Jun 3, 2013 9:55 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: Hi Brian, This is callmanager tftp, do you know what possible wrong setting here? K -- * From: * Brian Meade bmead...@vt.edu; * To: * Karen Johnson karen.johnson...@yahoo.ca; * Subject: * Re: [OSL | CCIE_Voice] TFTP issue * Sent: * Mon, Jun 3, 2013 11:46:05 PM Karen, It may just be an issue with the way you have your TFTP application set up. I always just use the HTTP method as it always works in all browsers. Thanks, Brian On Mon, Jun 3, 2013 at 7:38 PM, Karen Johnson karen.johnson...@yahoo.cawrote: thanks lot Brian, since I use http://172.120.64.10:6970/sb.txt all of the files that I upliad always work now. Hmm, curious why we need to trigger it like above ? *From:* Brian Meade bmead...@vt.edu *To:* ccie_voice@onlinestudylist.com *Sent:* Monday, June 3, 2013 10:18:30 AM *Subject:* Re: [OSL | CCIE_Voice] TFTP issue Karen, Try going to http://172.120.64.10:6970/sb.txt If that doesn't work, check http://172.160.64.10:6970/filelist.txt to see if that file is even listed. Thanks, Brian Date: Mon, 3 Jun 2013 07:37:14 -0700 (PDT) From: Karen Johnson karen.johnson...@yahoo.ca To: michael.se...@compucom.com michael.se...@compucom.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] TFTP issue Message-ID: 1370270234.47005.yahoomail...@web163904.mail.gq1.yahoo.com Content-Type: text/plain; charset=iso-8859-1 tks Mike, ? has anyone ever has issue , when upload file to UCM TFTP and restart the TFTP service.?? (Even reload the UCM) But when I try to download from UCM , it said failed not there. ? %Error opening tftp://172.120.64.10/sb.txt (No such file or directory) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] How to configure Clocking for GW's
First of all the question itself is ambiguous as clocking occurs at the physical layer of the OSI model. The DCE side is the PSTN and the DTE side is the user side and both reside at layer 1. The question really doesn't make sense. ! Question: Take clocking for Layer 1 from Network side. Your PRI clocking of layer 2 should be user side. No clocking at layer 2 ! In answer you your query about verification use the show controller t1 0/0/0 to determine if the circuit is running clean. Another useful command is show interface serial 0/0/0:23. ! With show controller your verifying, framing, line coding, clocking and you're looking for errors such as: ! Data in current interval (90 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs ! The show interface command will show you MTU, Bandwidth, Delay, Reliability, and transmit and receive load as well as possible errors: ! R1#show interface serial 0/0/0:23 Serial0/0/0:23 is up, line protocol is up (spoofing) Hardware is DSX1 MTU 1500 bytes, BW 64 Kbit/sec, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation HDLC, loopback not set Last input 00:00:13, output never, output hang never Last clearing of show interface counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 48 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 613735 packets input, 2458376 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 613719 packets output, 2456979 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 output buffer failures, 0 output buffers swapped out 1 carrier transitions Timeslot(s) Used:24, SCC: 0, Transmitter delay is 0 flags ! ! Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems From: Karen Johnson [mailto:karen.johnson...@yahoo.ca] Sent: Tuesday, July 02, 2013 11:12 PM To: Sears, Michael (msears); ccie_voice@onlinestudylist.com Subject: Re: How to configure Clocking for GW's tks Mike, very comprehensive - what is the verification command ? do we need to sh controller t1 to see if any noise on PRI line ? From: michael.se...@compucom.commailto:michael.se...@compucom.com michael.se...@compucom.commailto:michael.se...@compucom.com To: ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com Cc: karen.johnson...@yahoo.camailto:karen.johnson...@yahoo.ca Sent: Monday, July 1, 2013 9:09:31 AM Subject: RE: How to configure Clocking for GW's How to set clocking for PSTN Router and Branch Routers Example using MGCP gateway: ! ! Question: Take clocking for Layer 1 from Network side. --Means PSTN is Network Side Your PRI clocking of layer 2 should be user side. --Means Branch takes clock from PSTN ! ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! ! BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! ! !Hope this helps clarify the clocking issues and configuration. ! ! Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems
[OSL | CCIE_Voice] Presence issue
Hello, Has anybody ever experienced issues with presence clients and user's first and last name not showing even on the user's client itself? I'm integrating CUCM with presence but for some reason the user name would appear as username@domain instead of First and Last name. I'm talking about the name we should see on top of jabber presence status. -- *Daniel Gómez Quijada* *danie...@gmail.com* ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Can I use 1 single T1 line for voice and data at the same time?
Dear Experts, Can I use single T1 Line from any carrier such as ATT or Verizon for Voice and Data at the same time? Or it must be one dedicated for each? Thanks, Hesham ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Can I use 1 single T1 line for voice and data at the same time?
Hi Experts, that answered my questions If the T1 is Dynamic T1 or Integrated then It can combine voice and DATA? http://www.carrierschoice.com/what_is_a_t1.html I have another questions. If I have SIP Circuit from a telco (Verizon) can I have a voice T1 from ATT to work as backup for the SIP? Thanks, Hesham On 3 July 2013 10:09, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Dear Experts, Can I use single T1 Line from any carrier such as ATT or Verizon for Voice and Data at the same time? Or it must be one dedicated for each? Thanks, Hesham ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Can I use 1 single T1 line for voice and data at the same time?
You can run voice over a data t1 from most providers. This could be as a sip or h323 trunk (perhaps other ways too) My recommendation is to get one with QoS that matches your needs Sent from my iPhone On Jul 3, 2013, at 12:09 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Dear Experts, Can I use single T1 Line from any carrier such as ATT or Verizon for Voice and Data at the same time? Or it must be one dedicated for each? Thanks, Hesham ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Can I use 1 single T1 line for voice and data at the same time?
Bill thanks for your great participating. Let me ask you more challenging question If I have SIP from Verizon and I have Dynamic/Integrated T1 from ATT. Can I have the Dynamic T1 work as backup for Verizon's SIP? I know that if you have the same service provider you can make T1 Line can work as backup for SIP but I don't know if that will work out on different providers? Thanks, On 3 July 2013 10:51, Bill Lake whl...@gmail.com wrote: You can run voice over a data t1 from most providers. This could be as a sip or h323 trunk (perhaps other ways too) My recommendation is to get one with QoS that matches your needs Sent from my iPhone On Jul 3, 2013, at 12:09 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Dear Experts, Can I use single T1 Line from any carrier such as ATT or Verizon for Voice and Data at the same time? Or it must be one dedicated for each? Thanks, Hesham ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Can I use 1 single T1 line for voice and data at the same time?
Only if the service provider slows it So an example would be in your case Verizon accepts the SIP trunk from their IP 10.10.10.1 and they could also accept it from 20.20.20.1 on an ATT circuit What they most likely wont do is promise it will work as well Sent from my iPhone On Jul 3, 2013, at 12:55 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Bill thanks for your great participating. Let me ask you more challenging question If I have SIP from Verizon and I have Dynamic/Integrated T1 from ATT. Can I have the Dynamic T1 work as backup for Verizon's SIP? I know that if you have the same service provider you can make T1 Line can work as backup for SIP but I don't know if that will work out on different providers? Thanks, On 3 July 2013 10:51, Bill Lake whl...@gmail.com wrote: You can run voice over a data t1 from most providers. This could be as a sip or h323 trunk (perhaps other ways too) My recommendation is to get one with QoS that matches your needs Sent from my iPhone On Jul 3, 2013, at 12:09 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Dear Experts, Can I use single T1 Line from any carrier such as ATT or Verizon for Voice and Data at the same time? Or it must be one dedicated for each? Thanks, Hesham ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Can I use 1 single T1 line for voice and data at the same time?
Thank you very much Bill. As always I witness and confess you are the man. It's really difficult and tricky question and you given me great experience. Many Thanks, On 3 July 2013 14:15, Bill Lake whl...@gmail.com wrote: Only if the service provider slows it So an example would be in your case Verizon accepts the SIP trunk from their IP 10.10.10.1 and they could also accept it from 20.20.20.1 on an ATT circuit What they most likely wont do is promise it will work as well Sent from my iPhone On Jul 3, 2013, at 12:55 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Bill thanks for your great participating. Let me ask you more challenging question If I have SIP from Verizon and I have Dynamic/Integrated T1 from ATT. Can I have the Dynamic T1 work as backup for Verizon's SIP? I know that if you have the same service provider you can make T1 Line can work as backup for SIP but I don't know if that will work out on different providers? Thanks, On 3 July 2013 10:51, Bill Lake whl...@gmail.com wrote: You can run voice over a data t1 from most providers. This could be as a sip or h323 trunk (perhaps other ways too) My recommendation is to get one with QoS that matches your needs Sent from my iPhone On Jul 3, 2013, at 12:09 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Dear Experts, Can I use single T1 Line from any carrier such as ATT or Verizon for Voice and Data at the same time? Or it must be one dedicated for each? Thanks, Hesham ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Cisco unity/CUCM
HI when a PSTN user dial a cisco phone user extension 212620-4001,it plays like Press 1 for Billing department---(5001) Press 2 for others ---(4001 itself) how could we implement for the user 4001. -- Regards, Dharambir Kumar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] fast start H323
experts, i have configure H323 GW to be Fast start by using Transcoder and enable fast start under service voip in IOS GW. however when i make call and verified using sh call acti voice and looking at Fast Connect= False. - is there any thing else needed to make this work ? - what is the right steps to implement this : Inbound Fast Start to UCM and Outbound Fast Start from UCM ? tks K___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] How to configure Clocking for GW's
Thanks Mike From: michael.se...@compucom.com michael.se...@compucom.com To: karen.johnson...@yahoo.ca; ccie_voice@onlinestudylist.com Sent: Wednesday, July 3, 2013 8:11:03 AM Subject: RE: How to configure Clocking for GW's First of all the question itself is ambiguous as clocking occurs at the physical layer of the OSI model. The DCE side is the PSTN and the DTE side is the user side and both reside at layer 1. The question really doesn’t make sense. ! Question: Take clocking for Layer 1 from Network side. Your PRI clocking of layer 2 should be user side. No clocking at layer 2 ! In answer you your query about verification use the “show controller t1 0/0/0” to determine if the circuit is running clean. Another useful command is “show interface serial 0/0/0:23”. ! With show controller your verifying, framing, line coding, clocking and you’re looking for errors such as: ! Data in current interval (90 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs ! The show interface command will show you MTU, Bandwidth, Delay, Reliability, and transmit and receive load as well as possible errors: ! R1#show interface serial 0/0/0:23 Serial0/0/0:23 is up, line protocol is up (spoofing) Hardware is DSX1 MTU 1500 bytes, BW 64 Kbit/sec, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation HDLC, loopback not set Last input 00:00:13, output never, output hang never Last clearing of show interface counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 48 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 613735 packets input, 2458376 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 613719 packets output, 2456979 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 output buffer failures, 0 output buffers swapped out 1 carrier transitions Timeslot(s) Used:24, SCC: 0, Transmitter delay is 0 flags ! ! Michael Sears, CCIE(V)#38404 “Designing and Implementing Cisco Unified Communications on Unified Computing Systems” From:Karen Johnson [mailto:karen.johnson...@yahoo.ca] Sent: Tuesday, July 02, 2013 11:12 PM To: Sears, Michael (msears); ccie_voice@onlinestudylist.com Subject: Re: How to configure Clocking for GW's tks Mike, very comprehensive - what is the verification command ? do we need to sh controller t1 to see if any noise on PRI line ? From:michael.se...@compucom.com michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Cc: karen.johnson...@yahoo.ca Sent: Monday, July 1, 2013 9:09:31 AM Subject: RE: How to configure Clocking for GW's How to set clocking for PSTN Router and Branch Routers Example using MGCP gateway: ! ! Question: Take clocking for Layer 1 from Network side. --Means PSTN is Network Side Your PRI clocking of layer 2 should be user side. --Means Branch takes clock from PSTN ! ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! ! BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! ! !Hope this helps clarify the clocking issues and configuration. ! !
Re: [OSL | CCIE_Voice] fast start H323
Also on CM side with h245/h225 trace on this is the out F/S 05/21/2013 19:10:04.653 CCM|H225Cdpc::null0_CcSetupReq(3, 39229128): FastStartInfo: Outbound FastStart Triggered - PreAllocating MTP|CLID::StandAloneClusterNID::192.168.1.51CT::2,100,37,1.241129IP::10.10.202.121DEV::SEPD4D748FE5095LVL::State TransitionMASK::0100 There is a similar message for inbound. Edgar On Wed, Jul 3, 2013 at 8:20 PM, Edgar Feliz ejzi...@gmail.com wrote: Karen See below for fast connect... Make sure you are looking at the section that has the RemoteIPAddress with the IP address of the CM. Also did you enable F/S on the CM? VOIP: ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] CallID=7 RemoteIPAddress=192.168.1.51 RemoteUDPPort=17628 RemoteSignallingIPAddress=192.168.1.51 RemoteSignallingPort=1720 RemoteMediaIPAddress=10.10.110.2 RemoteMediaPort=17628 RoundTripDelay=0 ms SelectedQoS=best-effort tx_DtmfRelay=h245-alphanumeric FastConnect=TRUE fast Start Edgar On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson karen.johnson...@yahoo.cawrote: experts, i have configure H323 GW to be Fast start by using Transcoder and enable fast start under service voip in IOS GW. however when i make call and verified using sh call acti voice and looking at Fast Connect= False. - is there any thing else needed to make this work ? - what is the right steps to implement this : Inbound Fast Start to UCM and Outbound Fast Start from UCM ? tks K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] fast start H323
Karen See below for fast connect... Make sure you are looking at the section that has the RemoteIPAddress with the IP address of the CM. Also did you enable F/S on the CM? VOIP: ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] CallID=7 RemoteIPAddress=192.168.1.51 RemoteUDPPort=17628 RemoteSignallingIPAddress=192.168.1.51 RemoteSignallingPort=1720 RemoteMediaIPAddress=10.10.110.2 RemoteMediaPort=17628 RoundTripDelay=0 ms SelectedQoS=best-effort tx_DtmfRelay=h245-alphanumeric FastConnect=TRUE fast Start Edgar On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson karen.johnson...@yahoo.cawrote: experts, i have configure H323 GW to be Fast start by using Transcoder and enable fast start under service voip in IOS GW. however when i make call and verified using sh call acti voice and looking at Fast Connect= False. - is there any thing else needed to make this work ? - what is the right steps to implement this : Inbound Fast Start to UCM and Outbound Fast Start from UCM ? tks K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] fast start H323
Hi Edgar, that is not the h323 message, in the question, saying h323 message only. -ikizoo Date: Wed, 3 Jul 2013 20:29:02 -0400 From: ejzi...@gmail.com To: karen.johnson...@yahoo.ca CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] fast start H323 Also on CM side with h245/h225 trace on this is the out F/S 05/21/2013 19:10:04.653 CCM|H225Cdpc::null0_CcSetupReq(3, 39229128): FastStartInfo: Outbound FastStart Triggered - PreAllocating MTP|CLID::StandAloneClusterNID::192.168.1.51CT::2,100,37,1.241129IP::10.10.202.121DEV::SEPD4D748FE5095LVL::State TransitionMASK::0100 There is a similar message for inbound. Edgar On Wed, Jul 3, 2013 at 8:20 PM, Edgar Feliz ejzi...@gmail.com wrote: Karen See below for fast connect... Make sure you are looking at the section that has the RemoteIPAddress with the IP address of the CM. Also did you enable F/S on the CM? VOIP:ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08]CallID=7RemoteIPAddress=192.168.1.51RemoteUDPPort=17628RemoteSignallingIPAddress=192.168.1.51RemoteSignallingPort=1720 RemoteMediaIPAddress=10.10.110.2RemoteMediaPort=17628RoundTripDelay=0 msSelectedQoS=best-efforttx_DtmfRelay=h245-alphanumericFastConnect=TRUE fast Start Edgar On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: experts, i have configure H323 GW to be Fast start by using Transcoder and enable fast start under service voip in IOS GW. however when i make call and verified using sh call acti voice and looking at Fast Connect= False. - is there any thing else needed to make this work ? - what is the right steps to implement this : Inbound Fast Start to UCM and Outbound Fast Start from UCM ? tks K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
