Re: [OSL | CCIE_Voice] AAR Not Attempting to ReRoute
Hi Alex, Have you enabled AAR in CCM service parameters? Not Enough Bandwidth indicates that it's not enabled. You should receive something like 'Network Congestion - Rerouting' when AAR is invoked. Marty On Thu, Aug 22, 2013 at 5:00 PM, Alex Pishko alexpis...@gmail.com wrote: All, Hopefully someone can give me an idea on this one. Working on my own equipment but following the labs and am running into an issue with AAR. I'm sending a call from HQ to BR 1 using 4 digit dial 5002 --- 1002. When I attempt to make the call I receive the message Not enough bandwidth, however I never see AAR actually get invoked. In my setup as a quick way to simulate congestion I set the bandwidth to 23 Kbps between Hub non (hq) and BR1. When I place the call from HQ as I said I get the banner of not enough bandwidth but I never see the call actually hit the HQ gateway. I've run debug voip dialpeer, q931 as well voice ccapi inout and neither shows any sort of traffic hitting the gateway. In testing I can successfully dial into the HQ GW, I can dial emergency services from the HQ phone, just doesn't seem like it's ever invoking AAR. I also checked that the external number mask is correctly defined on the 1002 extension. AAR CSS is assigned to the HQ phone, AAR group is assigned to the HQ line. AAR group is prefixing 91 and there is a RP assigned to a partition that falls within the AAR CSS that is for 91617XXX that has a RL pointed to the HQ GW. I did see earlier in the lab that they recommend using 7962 phones, however I don't have any avaialble at the moment, so just wanted to make sure that this might not be it. Any help would be much appreciated. Thank you ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 90, Issue 39
get invoked. In my setup as a quick way to simulate congestion I set the bandwidth to 23 Kbps between Hub non (hq) and BR1. When I place the call from HQ as I said I get the banner of not enough bandwidth but I never see the call actually hit the HQ gateway. I've run debug voip dialpeer, q931 as well voice ccapi inout and neither shows any sort of traffic hitting the gateway. In testing I can successfully dial into the HQ GW, I can dial emergency services from the HQ phone, just doesn't seem like it's ever invoking AAR. I also checked that the external number mask is correctly defined on the 1002 extension. AAR CSS is assigned to the HQ phone, AAR group is assigned to the HQ line. AAR group is prefixing 91 and there is a RP assigned to a partition that falls within the AAR CSS that is for 91617XXX that has a RL pointed to the HQ GW. I did see earlier in the lab that they recommend using 7962 phones, however I don't have any avaialble at the moment, so just wanted to make sure that this might not be it. Any help would be much appreciated. Thank you ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20130823/030f3f88/attachment.html -- ___ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 90, Issue 39 ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Question about Proctor Labs and Routing via hardware based Router
IF I change my home router to use the same VLANs they do in the labs, then technically, I should still be able to connect and then I can draw from the same IP address poool used in each of the labs so it won't throw me off when I am looking at by local hardphones at my home location. Am I mistaken?___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Associate user in DN level
is it mandatory to assign user in DN level for all phones? K___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com