Re: [OSL | CCIE_Voice] CUPC Deskphone mode: TFTP Download Failed
Thank you both. From: "murr...@usa.com" To: A NN ; Ccie Voice Sent: Monday, 23 July 2012, 18:42 Subject: Re: [OSL | CCIE_Voice] CUPC Deskphone mode: TFTP Download Failed If you are only setting it up in desk phone mode you can ignore the tftp errors. You only need tftp working when you need to set it up in softphone mode. Meaning you created a UPC device in CUCM for it. Jason On 7/23/12 at 10:10 AM, A NN wrote: > Hi list, > > I set up CUPC in deskphone mode and everything is working fine. Except when I > go to server health on CUPC, I see under Phone Configuration (TFTP): Download > failed. > > When I go to TFTP details, I see that CUPC is trying to download the filename > "UPCSITEA1.cnf.xml". Which doesn't seem to exist. > On Presence I already double checked the TFTP setting and they are correct. > How can I get rid of this error? is it a cosmetic error, since everything > else is working fine. > ___ > > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUPC Deskphone mode: TFTP Download Failed
Hi list, I set up CUPC in deskphone mode and everything is working fine. Except when I go to server health on CUPC, I see under Phone Configuration (TFTP): Download failed. When I go to TFTP details, I see that CUPC is trying to download the filename "UPCSITEA1.cnf.xml". Which doesn't seem to exist. On Presence I already double checked the TFTP setting and they are correct. How can I get rid of this error? is it a cosmetic error, since everything else is working fine. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IPPM Problem
What does the "troubleshooting" tab on Presence show? all green? Do you have Incoming/outgoing ACL configured on Presence and set to ALL. Also try resetting the Proxy service On CUPS. From: Joe Albert To: ccie_voice@onlinestudylist.com Sent: Sunday, 17 June 2012, 16:43 Subject: [OSL | CCIE_Voice] IPPM Problem HI All, I have strange problem related to ippm: 1.I configure ippm service, the url is : http://177.1.10.50:8081/ippm/default?name=#DEVICENAME# 2. Phone subscribe on this service 3. Phone has user as owner id & user is associated with the phone line. 4. the end user is associated with the phone, 7 has cti enabled. 5. PhoneMessenger user is created and asssociated with the phone & has cti enabled & has 4 check boxes. 6. the same user is creates on Cups with the same password But whenever i select service from phone , it ask me for userid & Pin, Although it should ask only for pi. Any suggestions? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] callback
Ensure that the service parameter "Call back enabled Flag" is set to true. Then restart CCM service. From: Joel Petralia To: ccie_voice@onlinestudylist.com Sent: Sunday, 10 June 2012, 23:13 Subject: [OSL | CCIE_Voice] callback I am trying to get the callback feature working but the phones keep displaying Callback in not active. Any help would be greatly appreciated. Thank you, Joel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA Issue
Sorry, I got this mixed up. MVA does not support Calling name, even if you go off hook. From: A NN To: Joe Albert ; "ccie_voice@onlinestudylist.com" Sent: Sunday, 10 June 2012, 17:21 Subject: Re: [OSL | CCIE_Voice] MVA Issue Calling Name won't show up if the phone is ringing, you have to go off hook to see the CN. HTH From: Joe Albert To: ccie_voice@onlinestudylist.com Sent: Sunday, 10 June 2012, 15:07 Subject: [OSL | CCIE_Voice] MVA Issue Dear All, I have an MVA Issue: I configure as per the srnd. 1. I added the dial peer in the h323. 2. I define the service url in the h323 gw 3. The service parameters are configured on the cucm (MVA=on, & the number is defined). 4. The MVA access number is defined under media resource menu. 5. The Remote destination & the remote destination profile are defined in the cucm. 6. The user has mobility check box & associated with the phone & has cti enabled. The following occurs, When i call the MVA number i enter the pin of the user , then press 1 & when call any internal number only internal caller number appears, The caller name not appear although it is defined in the Remote destinatione profile. Any one has this issue and able to solve it? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA Issue
Calling Name won't show up if the phone is ringing, you have to go off hook to see the CN. HTH From: Joe Albert To: ccie_voice@onlinestudylist.com Sent: Sunday, 10 June 2012, 15:07 Subject: [OSL | CCIE_Voice] MVA Issue Dear All, I have an MVA Issue: I configure as per the srnd. 1. I added the dial peer in the h323. 2. I define the service url in the h323 gw 3. The service parameters are configured on the cucm (MVA=on, & the number is defined). 4. The MVA access number is defined under media resource menu. 5. The Remote destination & the remote destination profile are defined in the cucm. 6. The user has mobility check box & associated with the phone & has cti enabled. The following occurs, When i call the MVA number i enter the pin of the user , then press 1 & when call any internal number only internal caller number appears, The caller name not appear although it is defined in the Remote destinatione profile. Any one has this issue and able to solve it? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IPexpert work book
There is a good Switch QoS blog articles from Vik (check it via google). For WAN, read the QoS SRND. From: san r To: A NN Cc: "ccie_voice@onlinestudylist.com" Sent: Thursday, 31 May 2012, 16:56 Subject: Re: [OSL | CCIE_Voice] IPexpert work book Thanks. I was specifically looking for the QoS part. The info SRND is not good enough to understand the variations On Thu, May 31, 2012 at 9:24 PM, A NN wrote: IPExpert Voulume I lab and the Video Walkthrough is quite good. I wouldn't rely only on IP Expert to understand the technologies. The SRND guides and Feature and Services guides are a MUST. > >HTH > > > > From: san r >To: ccie_voice@onlinestudylist.com >Sent: Thursday, 31 May 2012, 15:10 >Subject: [OSL | CCIE_Voice] IPexpert work book > > > >Can anyone please guide me to select a workbook / material from IPExpert for >CCIE voice.I'm looking for a self study material with explanation for >technology not a lab oriented stuff. > > >Thanks in advance. > > >San > >___ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com > >___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IPexpert work book
IPExpert Voulume I lab and the Video Walkthrough is quite good. I wouldn't rely only on IP Expert to understand the technologies. The SRND guides and Feature and Services guides are a MUST. HTH From: san r To: ccie_voice@onlinestudylist.com Sent: Thursday, 31 May 2012, 15:10 Subject: [OSL | CCIE_Voice] IPexpert work book Can anyone please guide me to select a workbook / material from IPExpert for CCIE voice.I'm looking for a self study material with explanation for technology not a lab oriented stuff. Thanks in advance. San ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Unwanted Interdigit Timeout
I see you configured a Translation pattern, the css_internal points to the Route patten? Do you have urgent prio on the RP?. Your CSS_Internal might have access to other RPs. From: Jason Murray To: ccie_voice@onlinestudylist.com Sent: Wednesday, 30 May 2012, 14:56 Subject: [OSL | CCIE_Voice] Unwanted Interdigit Timeout I am running through the lab 5 vol2 and testing my config. I am trying to dial a local number for hq which is 9.2059432785. Every time i try and dial this number it sits there waiting on the timeout. I have attached some screen shots of my config. If i let the timeout go the call goes out perfect. There is no other number that I see that could be interfering. If I change the Translation pattern block instead of route the call immediately blocks the call as soon as I press the last 5. So I know its hitting that TP. But why is it getting interdigit timeout. Anyway its driving me nuts so I thought I would send it out to everyone to see if there is something that Im missing. Thanks Jason ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Gatekeeper understanding
Thank you Guys will try the below. If they ask in the lab to configure the Gatekeeper, are we free to choose if we use default-tech or tech-prefix? or do they specify this in the lab? From: Bill Lake To: A NN ; Kevin Spicer Cc: "ccie_voice@onlinestudylist.com" Sent: Wednesday, 30 May 2012, 11:22 Subject: Re: [OSL | CCIE_Voice] Gatekeeper understanding Why not try getting it to work first without the tech-prefix Try this: gk shut zone local UCM cisco.com zone local UCME cisco.com zone prefix UCM 1... gw-priority 10 gk-trunk_2 zone prefix UCM 1... gw-priority 9 gk-trunk_1 zone prefix UCME 3... zone prefix UCM 5... gw-priority 10 gk-trunk_2 zone prefix UCM 5... gw-priority 9 gk-trunk_1 gw-type-prefix 1# default-technology no shutdown BR2 no gateway interface lo0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip id UCME ipaddr 10.10.110.1 (changed to lo0 of GK) h323-gateway voip h323-id BR2-RTR h323-gateway voip bind srcaddr 10.10.110.3 Gateway Get it working then play with technology prefixing From: A NN Reply-To: A NN Date: Wednesday, May 30, 2012 3:52 AM To: Kevin Spicer Cc: "ccie_voice@onlinestudylist.com" Subject: Re: [OSL | CCIE_Voice] Gatekeeper understanding Hi Kevin, Yes, gateway command was there and the "show gatek en" showed the BR2-RTR as registered. How does the technology prefix works in this situation (two zones)? ________ From: Kevin Spicer To: A NN Cc: "ccie_voice@onlinestudylist.com" Sent: Wednesday, 30 May 2012, 5:56 Subject: Re: [OSL | CCIE_Voice] Gatekeeper understanding Hi, is ucme registered to the gk? (gateway command missing?) On 30 May 2012 03:08, "A NN" wrote: Hi list, >I configured a GK with two zones: >Zone UCM for CUCM >Zone UCME for Br2 router > > > When I make Calls from CUCM to CME (3xxx) call fails as per debugs below. I'm >not using any CUBE. Can please someone explain what's wrong with my config. > > zone local UCM cisco.com 10.10.200.3 > zone local UCME cisco.com > zone prefix UCM 1... gw-priority 10 gk-trunk_2 > zone prefix UCM 1... gw-priority 9 gk-trunk_1 > zone prefix UCM 1... gw-priority 0 BR2-RTR > zone prefix UCME 3... > zone prefix UCM 5... gw-priority 10 gk-trunk_2 > zone prefix UCM 5... gw-priority 9 gk-trunk_1 > zone prefix UCM 5... gw-priority 0 BR2-RTR > no shutdown > > >interface Loopback0 > ip address 10.10.110.3 255.255.255.255 > ip ospf network point-to-point > h323-gateway voip interface > h323-gateway voip id UCME ipaddr 10.10.200.3 1719 > h323-gateway voip h323-id BR2-RTR > h323-gateway voip tech-prefix 3 > h323-gateway voip bind srcaddr 10.10.110.3 > > > >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: >(3002) Matched tech-prefix 3 >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: >(3002) unresolved zone prefix, using source zone UCM >May 26 18:37:05.630: >////GK/gk_rassrv_get_ingress_network: returning >default ingress network = 1 >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: >about to check the source side, src_zonep=0x48C6E830 >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: >matched zone is UCM, and z_invianamelen=0 >May 26 >HQ-RTR(config-18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x48C6E830 >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: >matched zone is UCM, and z_outvianamelen=0 >May 26 18:37:05.630: >////GK/gk_rassrv_get_ingress_network: returning >default ingress network = 1 >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: >(3002) tech-prefix gateway selection failed. >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/gk_rassrv_sep_arq: >rassrv_get_addrinfo() failed (return code = 0x107)gk)# >HQ-RTR(config-gk)#e >May 26 18:37:15.518: ////GK/gk_process: got a TIMER >event >___ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Gatekeeper understanding
Hi Kevin, Yes, gateway command was there and the "show gatek en" showed the BR2-RTR as registered. How does the technology prefix works in this situation (two zones)? From: Kevin Spicer To: A NN Cc: "ccie_voice@onlinestudylist.com" Sent: Wednesday, 30 May 2012, 5:56 Subject: Re: [OSL | CCIE_Voice] Gatekeeper understanding Hi, is ucme registered to the gk? (gateway command missing?) On 30 May 2012 03:08, "A NN" wrote: Hi list, >I configured a GK with two zones: >Zone UCM for CUCM >Zone UCME for Br2 router > > > When I make Calls from CUCM to CME (3xxx) call fails as per debugs below. I'm >not using any CUBE. Can please someone explain what's wrong with my config. > > zone local UCM cisco.com 10.10.200.3 > zone local UCME cisco.com > zone prefix UCM 1... gw-priority 10 gk-trunk_2 > zone prefix UCM 1... gw-priority 9 gk-trunk_1 > zone prefix UCM 1... gw-priority 0 BR2-RTR > zone prefix UCME 3... > zone prefix UCM 5... gw-priority 10 gk-trunk_2 > zone prefix UCM 5... gw-priority 9 gk-trunk_1 > zone prefix UCM 5... gw-priority 0 BR2-RTR > no shutdown > > >interface Loopback0 > ip address 10.10.110.3 255.255.255.255 > ip ospf network point-to-point > h323-gateway voip interface > h323-gateway voip id UCME ipaddr 10.10.200.3 1719 > h323-gateway voip h323-id BR2-RTR > h323-gateway voip tech-prefix 3 > h323-gateway voip bind srcaddr 10.10.110.3 > > > >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: >(3002) Matched tech-prefix 3 >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: >(3002) unresolved zone prefix, using source zone UCM >May 26 18:37:05.630: >////GK/gk_rassrv_get_ingress_network: returning >default ingress network = 1 >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: >about to check the source side, src_zonep=0x48C6E830 >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: >matched zone is UCM, and z_invianamelen=0 >May 26 >HQ-RTR(config-18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x48C6E830 >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: >matched zone is UCM, and z_outvianamelen=0 >May 26 18:37:05.630: >////GK/gk_rassrv_get_ingress_network: returning >default ingress network = 1 >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: >(3002) tech-prefix gateway selection failed. >May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/gk_rassrv_sep_arq: >rassrv_get_addrinfo() failed (return code = 0x107)gk)# >HQ-RTR(config-gk)#e >May 26 18:37:15.518: ////GK/gk_process: got a TIMER >event >___ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com >___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Gatekeeper understanding
Hi list, I configured a GK with two zones: Zone UCM for CUCM Zone UCME for Br2 router When I make Calls from CUCM to CME (3xxx) call fails as per debugs below. I'm not using any CUBE. Can please someone explain what's wrong with my config. zone local UCM cisco.com 10.10.200.3 zone local UCME cisco.com zone prefix UCM 1... gw-priority 10 gk-trunk_2 zone prefix UCM 1... gw-priority 9 gk-trunk_1 zone prefix UCM 1... gw-priority 0 BR2-RTR zone prefix UCME 3... zone prefix UCM 5... gw-priority 10 gk-trunk_2 zone prefix UCM 5... gw-priority 9 gk-trunk_1 zone prefix UCM 5... gw-priority 0 BR2-RTR no shutdown interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip id UCME ipaddr 10.10.200.3 1719 h323-gateway voip h323-id BR2-RTR h323-gateway voip tech-prefix 3 h323-gateway voip bind srcaddr 10.10.110.3 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: (3002) Matched tech-prefix 3 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: (3002) unresolved zone prefix, using source zone UCM May 26 18:37:05.630: ////GK/gk_rassrv_get_ingress_network: returning default ingress network = 1 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x48C6E830 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: matched zone is UCM, and z_invianamelen=0 May 26 HQ-RTR(config-18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x48C6E830 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: matched zone is UCM, and z_outvianamelen=0 May 26 18:37:05.630: ////GK/gk_rassrv_get_ingress_network: returning default ingress network = 1 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: (3002) tech-prefix gateway selection failed. May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/gk_rassrv_sep_arq: rassrv_get_addrinfo() failed (return code = 0x107)gk)# HQ-RTR(config-gk)#e May 26 18:37:15.518: ////GK/gk_process: got a TIMER event ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com