[OSL | CCIE_Voice] Accessing SB cluster using single browser
Hi Folks: My Esxi server has two ethernet ports; one port connected to HQ and then other to SB. I installed CUCM 9 on both clusters. My Esxi is configured with 10.10.100.x and I can access HQ Publisher from my browser (windows 7). Is it necessary to have a separate workstation to access the SB cluster or is there any way to access it from a single workstation? Thank you and have a good one. ___ Free CCIE RS, Collaboration, Data Center, Wireless Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
Re: [OSL | CCIE_Voice] Voice translation-rule 97
use 'test voice translation-rule 97' to see the result and play around good book 'Mastering Regular Expressions' On Sun, Oct 20, 2013 at 9:11 AM, Anthony Nwachukwu anwachu...@apafrica.comwrote: Can some one help explain the rule below. Voice translation-rule 97 Rule 1 /^.*\(3…$\)/ /\1/ exit Voice translation-profile TELCO Translate called 97 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CAC RSVP Not enough bandwidth tip
Suresh Bhandari's link is helpful Check if this helps: http://sureshbhandari.com.np/rsvp-configuration-and-errors/ Amdo On Tue, Jul 30, 2013 at 12:31 AM, ie ravindra ieravin...@gmail.com wrote: Hi Amdo, I have faced the same thing when I am in the real lab all local site calls went failed. But every thing correct. I can't understand the logic behind of that. Let me explain some workaround I did. I changed the location of Site C to Hub none in the lab in my lab day. then local calls goes out without issue. so try like this. create different location for Site A , Site B , and Site C. other than hub_none and Assign it to respective sites and assign required bandwidth. Then let me know what happens. I guess the problem is with hub none location. But let me know the results. Thanks, Ravi, On Mon, Jul 29, 2013 at 7:13 PM, Amdo Ngawa datapack...@gmail.com wrote: Hi Folks: I had been having trouble with CAC RSVP lately. Once I configured CAC RSVP between two sites, the calls between the two sides failed with error *Not enough bandwidth'* Checked my configuration thoroughly. Locations CAC configured; mrg and mrgls proper, mtp profiles fine; sccp and dspfarm created and registered with CUCM; all good to go. Found suggestions online, but most talked about proper configuration which I had already done. However, there was one quirky suggestion that I tried: Assuming CAC RSVP is between HQ and other site, I removed the hq-rsvp-mtp from the mrg-hq and inserted a default sub or pub (mtp_2,mtp_1) and saved. Thereafter I removed the default mtp from mrg-hq and reinserted the hq-mtp-rsvp and saved the changes and reset. For good measure, I clicked the resync-bandwidth for for both sites in the Location section (SettingsLocation) The calls started to work. show ip rsvp reservation and sh ip rsvp int showed output that I wanted. Thanks, Amdo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] NO Extension in CME-SRST
I am having similar issue. No resolution so far? Will read and google. Thanks On Thu, May 16, 2013 at 4:21 PM, CISCO CCIE VOICE ccievoic...@gmail.comwrote: HI experts, When the Phones are in CME SRST its does not shows Extension on Phone display this happens when i change the name +86223033001 to SiteC Phone 1 under Ephone-dn's Thnks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IP voice media streaming app service down on AMD whitebox
Thanks BIll and Michael. On Mon, Jul 29, 2013 at 2:14 AM, Michael Heimann mich...@heimann.ws wrote: I've never had any issues with my AMD boxes but the Media Streaming Service. And this can easily be resolved by creating a -athlon symlink to the intel modules folder. Details can easily be found on Google ;) If the service doesn't come up, the naming is wrong. Cheers, Michael Am 29.07.2013 um 02:49 schrieb Amdo Ngawa datapack...@gmail.com: Hi Friends: I am running Esxi 5 on my Gigabtye AMD machine. I found in the CUCM features that my IP voice media streaming app service is activated but never runs despite starting it. I seem to have issues with my CUE jtapi registering very infrequently; CUE route points not registering etc. I don't know if the above service has attributed to this issue. It so happens that AMD motherboard and chipset are affected with the above service failing. SEE http://www.fatturtle.com/2010/06/ip-voice-media-streaming-app-service-wont-start/ I tried various methods including the above in vain. I have an older backup whitebox build on Intel platform that has no issues, but limited to DDR2 8 gb ram (DDR2 very expensive). Will it be possible to practice the full lab on 8 gb memory? Can I configure PUB, SUB, CUC, UCCX, CUPS with 1.5 gb each? Thanks Amdo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CAC RSVP Not enough bandwidth tip
Hi Folks: I had been having trouble with CAC RSVP lately. Once I configured CAC RSVP between two sites, the calls between the two sides failed with error *Not enough bandwidth'* Checked my configuration thoroughly. Locations CAC configured; mrg and mrgls proper, mtp profiles fine; sccp and dspfarm created and registered with CUCM; all good to go. Found suggestions online, but most talked about proper configuration which I had already done. However, there was one quirky suggestion that I tried: Assuming CAC RSVP is between HQ and other site, I removed the hq-rsvp-mtp from the mrg-hq and inserted a default sub or pub (mtp_2,mtp_1) and saved. Thereafter I removed the default mtp from mrg-hq and reinserted the hq-mtp-rsvp and saved the changes and reset. For good measure, I clicked the resync-bandwidth for for both sites in the Location section (SettingsLocation) The calls started to work. show ip rsvp reservation and sh ip rsvp int showed output that I wanted. Thanks, Amdo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] IP voice media streaming app service down on AMD whitebox
Hi Friends: I am running Esxi 5 on my Gigabtye AMD machine. I found in the CUCM features that my IP voice media streaming app service is activated but never runs despite starting it. I seem to have issues with my CUE jtapi registering very infrequently; CUE route points not registering etc. I don't know if the above service has attributed to this issue. It so happens that AMD motherboard and chipset are affected with the above service failing. SEE http://www.fatturtle.com/2010/06/ip-voice-media-streaming-app-service-wont-start/ I tried various methods including the above in vain. I have an older backup whitebox build on Intel platform that has no issues, but limited to DDR2 8 gb ram (DDR2 very expensive). Will it be possible to practice the full lab on 8 gb memory? Can I configure PUB, SUB, CUC, UCCX, CUPS with 1.5 gb each? Thanks Amdo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] GW config
I have started to put isdn negotiate-bchan along with the other commands in your list. Thx On Fri, Jul 12, 2013 at 7:01 PM, Karen Johnson karen.johnson...@yahoo.cawrote: Mike, What is best practice for GW HQ, SB,SC in exam ? is this configuration below enough for all 3 GW? interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable K *From:* michael.se...@compucom.com michael.se...@compucom.com *To:* karen.johnson...@yahoo.ca; ccie_voice@onlinestudylist.com *Sent:* Wednesday, July 3, 2013 8:11:03 AM *Subject:* RE: How to configure Clocking for GW's First of all the question itself is ambiguous as clocking occurs at the physical layer of the OSI model. The DCE side is the PSTN and the DTE side is the user side and both reside at layer 1. The question really doesn’t make sense. ! Question: Take clocking for Layer 1 from Network side. Your PRI clocking of layer 2 should be user side. No clocking at layer 2 ! In answer you your query about verification use the “show controller t1 0/0/0” to determine if the circuit is running clean. Another useful command is “show interface serial 0/0/0:23”. ! With show controller your verifying, framing, line coding, clocking and you’re looking for errors such as: ! Data in current interval (90 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs ! The show interface command will show you MTU, Bandwidth, Delay, Reliability, and transmit and receive load as well as possible errors: ! R1#show interface serial 0/0/0:23 Serial0/0/0:23 is up, line protocol is up (spoofing) Hardware is DSX1 MTU 1500 bytes, BW 64 Kbit/sec, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation HDLC, loopback not set Last input 00:00:13, output never, output hang never Last clearing of show interface counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 48 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 613735 packets input, 2458376 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 613719 packets output, 2456979 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 output buffer failures, 0 output buffers swapped out 1 carrier transitions Timeslot(s) Used:24, SCC: 0, Transmitter delay is 0 flags ! ! Michael Sears, CCIE(V)#38404 “Designing and Implementing Cisco Unified Communications on Unified Computing Systems” *From:* Karen Johnson [mailto:karen.johnson...@yahoo.ca] *Sent:* Tuesday, July 02, 2013 11:12 PM *To:* Sears, Michael (msears); ccie_voice@onlinestudylist.com *Subject:* Re: How to configure Clocking for GW's tks Mike, very comprehensive - what is the verification command ? do we need to sh controller t1 to see if any noise on PRI line ? *From:* michael.se...@compucom.com michael.se...@compucom.com *To:* ccie_voice@onlinestudylist.com *Cc:* karen.johnson...@yahoo.ca *Sent:* Monday, July 1, 2013 9:09:31 AM *Subject:* RE: How to configure Clocking for GW's How to set clocking for PSTN Router and Branch Routers Example using MGCP gateway: ! ! Question: Take clocking for Layer 1 from Network side. --Means PSTN is Network Side Your PRI clocking of layer 2 should be user side. --Means Branch takes clock from PSTN ! ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! ! BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0
Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status
If we are specifically asked to enable status poll', then we must configure the B-channes in SP. Good to know how to do it. Found this link to among the archive. http://ieoc.com/forums/p/24184/184888.aspx Thx On Wed, Jun 19, 2013 at 1:59 PM, Karen Johnson karen.johnson...@yahoo.cawrote: Thanks Ricardo, so if we ever need fractional T1/E1 , we only need to use pri-group timeslots 1-6 service mgcp on GW. But why the :busyout B-channel still exist in UCM service parameter ? is there any IOS GW that can't do above? tks K *From:* Ricardo ricardoareval...@gmail.com *To:* Karen Johnson karen.johnson...@yahoo.ca *Cc:* Robert Thomas tho...@gmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com *Sent:* Wednesday, June 19, 2013 7:30:11 AM *Subject:* Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status Normally I don't post unless there is something to be said. Sorry to say this is not old story. Cisco doesn't support fractional MGCP PRIs, that is for both E1 and T1, and only 5 endpoints with the b-channel maintenance status are allowed per cluster. Please take a look at this https://supportforums.cisco.com/docs/DOC-2038 in it you will find the BUGs: CSCed41207http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetailsbugId=CSCed41207and CSCdw29259http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetailsbugId=CSCdw29259 . As a workaround you can use partial configuration when defining the PRI: pri-group timeslots 1-6 service mgcp Just dont use these commands: ccm-manager config server X.X.X.X ccm-manager config Otherwise the CUCM will keep modifying the PRI to use all the channels, using more DSPs than the gateway was supposed to. Be careful. This condition still exists in real life, especially in countries were PRI/E1 is offered. Cisco's recommendation is to use H323 instead of MGCP. //r.a. On Wed, Jun 19, 2013 at 2:22 AM, Karen Johnson karen.johnson...@yahoo.cawrote: tks Robert and Bill. so in exam i will leave to default and not worry on this : busy out if (Inhibit re-starts at PRI initialization is checked) *From:* Robert Thomas tho...@gmail.com *To:* Karen Johnson karen.johnson...@yahoo.ca *Cc:* ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com *Sent:* Sunday, June 16, 2013 9:42:51 PM *Subject:* Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status Karen, Those parameters are old story. The were used back in the 6608 days, have no use on the current MGCP GW. If you configure your PRI as fractional with less timeslots, CUCM would audit the port and the GW report back an error for that endpoint, CUCM will then mark it out of service automatically. On Sun, Jun 16, 2013 at 2:25 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: when do MGCP, i come across service parameter Change B-Channel Maintenance Status and they only have 5 box. - does that mean in one cluster we can have 5 GW that use partial PRI with MGCP ? - if i plan to use partial PRI in MGCP, do i need to also busy out above paramater or pri-group timeslots 1-12,16 service mgcp command in GW is enough? - based on UCM help page, we only need use busy out if (Inhibit re-starts at PRI initialization is checked) I just try to make sense of this statement tks K. ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Changing CUCM IP address on Cisco Presence
Optional: Configure ip add for the CUPS server name: CUCM Application Server Name (x.x.x.x) Thx Amdo On Sun, Jul 7, 2013 at 12:38 AM, Daniel Gomez danie...@gmail.com wrote: Hello, Does anybody know if there's any guide showing the procedure to change CUCM IP address on a presence server. CUCM IP address has to change and therefore we need to change it on presence server. Regards, Daniel Gómez Quijada danie...@gmail.com Sent from my iPhone ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] All UC URLs
If I may add to your list VoiceView (R2 CUE IP Phones) http://[CUE-IP]/voiceview/common/login.do Misc: CUE: software download server url ftp://[FTP-IP]/[ccm/cme license.pkg] username [eg. admin] password [eg. cisco] Optional: No Services Configured Service Parameter Phone URL Parameters URL Directories http://[CCX-IP] /[directoryname.xml] Best, Amdo On Fri, Jul 5, 2013 at 7:40 AM, Marcelo Augusto maugusto...@gmail.comwrote: I´m trying to collect all possibles URLs that can appear on lab exam to memorize them (maybe tattoo on my arm hehehe). I´m forgetting some other? Can i remove some of this from my memory? Extension mobility cucm http://[CCM-IP]:8080/emapp/EMAppServlet?device=#DEVICENAME# Ipma - Manager Assistance http:// [CCM-IP]:8080/ma/servlet/MAService?cmd=doPhoneServiceName=#DEVICENAME# Mobile voice access (TCL Script) http://[CCM-IP]:8080/ccmivr/pages/IVRMainpage.vxml IPPA - IP Phone Agent Service http://[CCX-IP]:6293/ipphone/jsp/sciphonexml/IPAgentInitial.jsp IPPA - ONE BUTTON LOGIN http://[CCX-IP]:6293/ipphone/jsp/sciphonexml/IPAgentLogin.jsp Param: Ext, Pwd, ID IPPM - IP Phone Messenger http://[CUPS-IP]:8081/ippm/default?name=#DEVICENAME# Thanks :) -- .:.::Marcelo Augusto::.:. MSN: harkonmose...@hotmail.com SKYPE: harkonmoseley ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
