Re: [OSL | CCIE_Voice] Accessing CUCM from remote site
Hi, Thanks all, I have resolved it, as there were some routing issue and i had to change the ipaddress of my PC NIC card and CUCM gateway to same OSPF range and it worked. Regards, Nish Date: Sun, 9 Oct 2011 02:48:07 -0600 Subject: Re: [OSL | CCIE_Voice] Accessing CUCM from remote site From: ash.ayy...@gmail.com To: nishi...@hotmail.com CC: ccie_voice@onlinestudylist.com Hey Nish , the info you provided is not enough , can you try to ping from the ccm to the SVI of Site B ? can you make sure that you have the SVI interface state as up up ? can you please make more advanced troubleshooting and share it result with us , note we dont have access to your system to find out this by ourself so your collaboration will help us more Ash On Sun, Oct 9, 2011 at 1:35 AM, Nish Tarpara nishi...@hotmail.com wrote: Hi All, I am having problem accessing CUCM(on VMware workstation6.5) from Site B and able to connect fine from HQ site(Vlan10,20,30) and also able to ping CUCM server via switch. I am using same switch for Site B to connect Site B routers and phone with different Vlans 40 50. from site B router i am able to ping VM Workstation PC but not the CUCM server which reside on that VM. Please advise soon as i am unable to work further. Thank you, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Accessing CUCM from remote site
Hi All, I am having problem accessing CUCM(on VMware workstation6.5) from Site B and able to connect fine from HQ site(Vlan10,20,30) and also able to ping CUCM server via switch. I am using same switch for Site B to connect Site B routers and phone with different Vlans 40 50. from site B router i am able to ping VM Workstation PC but not the CUCM server which reside on that VM. Please advise soon as i am unable to work further. Thank you, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com
Hi Ron, Same here, booked 2 sessions. Regards, Nish CC: ccie_voice@onlinestudylist.com; supp...@ipexpert.com From: ron...@solcon.nl Subject: Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com Date: Sun, 21 Aug 2011 09:11:06 +0200 To: nishi...@hotmail.com Also down hereProctorlabs down!!!Also website downI have two sessions today and one is already halfway Send from my mobile Op 21 aug. 2011 om 06:24 heeft Nish Tarpara nishi...@hotmail.com het volgende geschreven: Hi, I am unable to access or open proctorlabs.com site. getting below error. Server ErrorThe server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Unable to access Proctorlabs.com
Hi, I am unable to access or open proctorlabs.com site. getting below error. Server ErrorThe server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Site BR2 IP Phone registration DHCP query
Hi All, Could anybody please advise me if there is any way to achieve BR2 phs registration on remote rack via HW VPN. As per below configs. ip dhcp excluded-address 10.10.202.1 10.10.202.49 ip dhcp excluded-address 10.10.202.70 10.10.202.254 ! ip dhcp pool br21 host 10.10.202.11 255.255.255.0 client-identifier 001A.A242.A2B6 default-router 10.10.202.1 option 150 ip 10.10.210.11 10.10.210.12 ! ip dhcp pool br22 host 10.10.202.12 255.255.255.0 client-identifier 0018.195A.B173 default-router 10.10.202.1 option 150 ip 10.10.210.11 10.10.210.12 presently phones are getting IP address from my VPN router dhcp pool as its acting as default GW. Kindly please advise Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] ISDN Query.
Hi, i am having problem with incoming call on to gateway, after 4 ring calls gets disconnected automatically. its affecting particularity just one DN. ISDN channel was recently reduced from 11 to 8. May 5 11:43:12: ISDN Se1/0:15 Q931: RX - SETUP pd = 8 callref = 0x0001 Sending Complete Bearer Capability i = 0x9090A3 Standard = CCITT Transer Capability = 3.1kHz Audio Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8483 - Origination address is non-ISDN Calling Party Number i = '!', 0x83, '7973154825' Plan:ISDN, Type:National Called Party Number i = 0x81, '0786' Plan:ISDN, Type:Unknown May 5 11:43:12: ISDN Se1/0:15 Q931: TX - CALL_PROC pd = 8 callref = 0x8001 Channel ID i = 0xA98381 Exclusive, Channel 1 ccr-r_leeds_01# May 5 11:43:12: ISDN Se1/0:15 Q931: TX - ALERTING pd = 8 callref = 0x8001 May 5 11:43:28: ISDN Se1/0:15 Q931: RX - DISCONNECT pd = 8 callref = 0x0001 Cause i = 0x829F - Normal, unspecified May 5 11:43:28: ISDN Se1/0:15 Q931: TX - RELEASE pd = 8 callref = 0x8001 May 5 11:43:28: ISDN Se1/0:15 Q931: RX - FACILITY pd = 8 callref = show_data: bad length 0 size 27 Facility i = 0x91A10F020242010C30060A01030A0103 - ETSI Supplementary Service, Invoke, Unsupported operation Called Party Number i = 0x81, '0786' Plan:ISDN, Type:Unknown May 5 11:43:28: ISDN **ERROR**: Module-CCPRI Function-CCPRI_Go Error-Event received for an unrecognized call: B6 May 5 11:43:28: ISDN Se1/0:15 Q931: RX - RELEASE_COMP pd = 8 callref = 0x0001 Could you please advice me what is the above error message. Regards, Nish _ http://clk.atdmt.com/UKM/go/195013117/direct/01/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SRST Test
Arun and Aman Thanks, i'll try in my next session. Regards, Nish Date: Thu, 11 Feb 2010 11:01:02 -0500 Subject: Re: [OSL | CCIE_Voice] (no subject) From: aman.ch...@gmail.com To: arunv...@gmail.com CC: nishi...@hotmail.com; ccie_voice@onlinestudylist.com You can use acl to test SRST. Regards, Aman On Thu, Feb 11, 2010 at 8:26 AM, Arun Kumar arunv...@gmail.com wrote: just simply stop ccm service. On Thu, Feb 11, 2010 at 4:16 PM, Nish Tarpara nishi...@hotmail.com wrote: Hi, With regards to SRST teting on remote lab, please advice me how to test it by remote ip phones connected via Ezvpn. Regards, Nish Tarpara We want to hear all your funny, exciting and crazy Hotmail stories. Tell us now ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _ Do you have a story that started on Hotmail? Tell us now http://clk.atdmt.com/UKM/go/195013117/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
Hi, With regards to SRST teting on remote lab, please advice me how to test it by remote ip phones connected via Ezvpn. Regards, Nish Tarpara _ Tell us your greatest, weirdest and funniest Hotmail stories http://clk.atdmt.com/UKM/go/195013117/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Software voice lab
Hi, I am running VMware with quad core, 8GB mem, have tried one or twice to run, all v7.x Pub,CUC, CUCCx presence. actually i have just started working on it few days back all working fine with Ubuntu 9.10 x64. also have CMEx 5 7961 2-sip and 3 running sccp. i haven't started working with unity conn yet, but I believe 2GB should be fine for unity conn. is it ESX or VMware workstation you are running? as i am using workstation and have tested all server running same time and found no issues. Regards, Nish Date: Thu, 17 Dec 2009 22:23:22 -0500 From: crazi...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Software voice lab Does anyone out there is using a software/vmware/gns based voice lab at home. Obviously setup varies from a hardware lab, thought it would be nice to discuss issues and challenges to get the most out of it. Currently I'm running some issues in Unity Connections where it doesn't do anything after you punch in the pin and next you find out the ports gets unregistered. If I make it bypass it then it works ok, UC is a memory hog and currently am running it on 2GB. Please reply to this post so maybe we can form a study group helping each other on issues faced in the lab setup. Maybe start something on google wave. Thanks. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _ Use Hotmail to send and receive mail from your different email accounts http://clk.atdmt.com/UKM/go/186394592/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] GW debug error
Hi Everybody, I have question about error appearing on GW for one of our customer as shown below. Channel ID i = 0xA98384 Exclusive, Channel 4 Progress Ind i = 0x8483 - Origination address is non-ISDN Calling Party Number i = 0x2183, '7725352820' Plan:ISDN, Type:National Called Party Number i = 0x81, '204912' Plan:ISDN, Type:Unknown Mar 13 23:45:32.262: ISDN Se0/0:15 **ERROR**: isdn_get_guid: Cannot allocate a GUID Mar 13 23:45:32.287: ISDN Se0/0:15 Q931: TX - CALL_PROC pd = 8 callref = 0x8004 Channel ID i = 0xA18384 Preferred, Channel 4 Mar 13 23:45:32.303: ISDN Se0/0:15 Q931: TX - DISCONNECT pd = 8 callref = 0x8004 Cause i = 0x8081 - Unallocated/unassigned number Mar 13 23:45:32.475: ISDN Se0/0:15 Q931: RX - RELEASE pd = 8 callref = 0x0004 Mar 13 23:45:32.479: ISDN Se0/0:15 Q931: TX - RELEASE_COMP pd = 8 callref = 0x8004 * This happens only for one extension. when dialed from mobile as above getting message the no. you have dialed has not been recognised * Only for ext4912 inbound call. all other no. are fine and oubound calls are fine from this ext. * Extno. 4912 has been working for past few ys, already setup in CUCM 6.1 - GW-1760 what i found was to apply command on serial int. no isdn outgoing ie redirecting-number . does this help to solve the problem? Kindly need some help. Regards, Nish _ Save time by using Hotmail to access your other email accounts. http://clk.atdmt.com/UKM/go/167688463/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] X-Lite phone call
Hi, Please advise if ccm-manager configccm-manager config server command can be used in voice lab. Regards, Nish From: n.ja...@cbi.ma To: mciarfe...@iplogic.com Date: Sat, 18 Jul 2009 11:48:35 +0100 CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] X-Lite phone call Don’t forget Digest Credentials under End User configuration Digest Credentials: 2003 Confirm Digest Credentials: 2003 De : ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] De la part de Nizar JAFRI Envoyé : samedi 18 juillet 2009 10:44 À : 'Michael Ciarfello' Cc : ccie_voice@onlinestudylist.com Objet : Re: [OSL | CCIE_Voice] X-Lite phone call Use the procedure below to register X-lite with CUCM, The user name must be the xlite’s directory number Select Menu : User Management -End User-Add New : User ID: 2003 Password: 2003 (you can anythings) Confirm Password: 2003 (you can anythings) PIN: 2003 (you can anythings) Confirm PIN: 2003 (you can anythings) Last Name: 2003 And You Save. Next Your Select Menu : Device - Phone - Add New Select Product type : Third-party SIP Device (Basic) - Next MAC Address* : (your MAC PC/laptop) Decription: SEP(your MAC PC/laptop) Device Pool*efault Phone Buttom Template*:Third-party SIP Device (Basic) Common Phone Profile : Standard Common Phone Profile(default) Location : Hub_None (Default) PROTOCOL SPECIFIC INFORMATION : Presence Group : Standard Presence Group (Default) MTP Preferred Originating Codec : 711Ulaw (gray) Device Security Profile : Third-party SIP Device Basic-Standard SIP non-Secure Profile SIP Profile : Standard SIP Profile Digest User : 2003 And you Save Click on the Reset Phone Button to have the Changes take Effect -- Select OK In left line : line[1]-Add a New DN Directory Number* : 2003 and you Save And Your Select Againt Menu : User Management - End User Click in 2003 and click in Device Association - Directory Number, Begin With 2003 - Find and Check SEPSEP(your MAC PC/laptop) and then your click SAVE SELECTED/CHANGES In X-Lite Setting : Open Menu : Properties of Account User Details : 2003 User Name : 2003 Password : 2003 Authorization User Name : 2003 Domain : ip Add CM Domain Proxy : Check Register With Domain and Receive Incoming Calls Send Outbound Via : Check Domain Good luck. De : ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] De la part de Michael Ciarfello Envoyé : samedi 18 juillet 2009 02:58 À : c george; e_er...@yahoo.com; ccie_voice@onlinestudylist.com Objet : Re: [OSL | CCIE_Voice] X-Lite phone call It works in CCM also. Use third party basic or advanced. Go back through the archives and seek a post on 7/4/2009 with the subject: RE: [OSL | CCIE_Voice] X-lite in CM 7.0 There's an xlite config for CCM and a great discussion by Bill Talley on the differences between basic vs advanced. From: ccie_voice-boun...@onlinestudylist.com [ccie_voice-boun...@onlinestudylist.com] On Behalf Of c george [cisco...@hotmail.com] Sent: Friday, July 17, 2009 4:19 PM To: e_er...@yahoo.com; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] X-Lite phone call isnt the xlite for cme only ? Respectfully Charles George Date: Fri, 17 Jul 2009 13:06:52 -0700 From: e_er...@yahoo.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] X-Lite phone call hi, anybody experience this ? I register x-lite SIP phone and phone register fine, but when I make call it said service unavilable , when I make sure using DNA it showing call should go out using MGCP gateway (register ok in CCM 7.) pls help tks Lauren found her dream laptop. Find the PC that’s right for you. __ NOD32 4255 (20090717) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com __ NOD32 4255 (20090717) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com _ Windows Live Messenger: Celebrate 10 amazing years with free winks and emoticons. http://clk.atdmt.com/UKM/go/157562755/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] voice command
Hi, Please advise if ccm-manager configccm-manager config server command can be used in voice lab. Please ignore my last email. Regards, Nish _ Celebrate a decade of Messenger with free winks, emoticons, display pics, and more. http://clk.atdmt.com/UKM/go/157562755/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] voice command
So, Peter have you tested the command to see if it slowdown or crashes the router. i will try doing testing on my lab 2800 series router. Regards, Nish Date: Sat, 18 Jul 2009 15:22:56 -0400 Subject: Re: [OSL | CCIE_Voice] voice command From: peter.s...@gmail.com To: nishi...@hotmail.com CC: ccie_voice@onlinestudylist.com Nish, you can use them unless your test says not to =) YOu just need to understand the implications of using them. -Pete On Sat, Jul 18, 2009 at 3:12 PM, Nish Tarparanishi...@hotmail.com wrote: Hi, Please advise if ccm-manager configccm-manager config server command can be used in voice lab. Please ignore my last email. Regards, Nish Celebrate a decade of Messenger with free winks, emoticons, display pics, and more. Get Them Now ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _ With Windows Live, you can organise, edit, and share your photos. http://clk.atdmt.com/UKM/go/134665338/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com