Many thank Justin. This is very helpful.
Best regards
Paul Onwude
(Please excuse the brevity of this email as it was sent via a mobile device.
Kindly excuse misspelled words or sentence structure)
> On 4 Nov, 2013, at 7:28 pm, Justin Carney wrote:
>
> If you're adding the plus I cucm this is expected behavior that it will be
> lost at the ios gw. You're not missing anything on cucm, this is just how
> h323 works on ios routers...the only option is to add a plus in the ios
> gateway.
>
> IOS/h323 will (by design, unfortunately) discard a plus in dnis on the
> inbound call leg, so make sure you are adding it on the outbound dial or
> voice port. (You might be able to add plus on an inbound dial peer but I
> haven't tried and not sure if it would then get discarded.)
>
> For the lab I would recommend doing ALL h323 digit manipilation on the h323
> gw. If you do it in cucm then later when you need to do srst you will need
> extra dialpeers and/or translations.
>
> For example, I use only 4 outbound pots dialpeers in h323 each with a
> translation profile that modifies ani (for each site, matching 2... 3... and
> 4...) and dnis (usually just type/plan). I send all the dialed digits from a
> phone to the h323 gw the let the gw make the ani and dnis match the pstn
> requirements for all call types including teho.
>
> The only time I modify digits in cucm is when "no new rp is alowed for 911 at
> site b" and that uses slrg - the ani is masked to 7digits in cucm, but the
> h323 still must set ani/dnis type and plan to unknown for dnis. Also, for
> teho from site a to site b pstn, I would strip the 91408 from the dialed
> digits and prefix 9 in the route list/rg for h323 so it matches my outbound
> local dialpeer.
>
> Hope this helps.
>
> -Justin
>
>> On Nov 4, 2013 2:19 AM, "Paul Onwude" wrote:
>> Hi All.
>> Need expert opinion on this.
>> I have a H323 gateway and i have setup called party transformations on CUCM
>> to send “+” to the gateway. My issue is i don’t see the plus when i debug
>> ids q931. When i do other digit manipulation like adding “#”, it show up on
>> the gateway but not the “+”
>>
>> I know i can probably achieve this using translation on the GW but i can’t
>> help but think there is something i am missing in CUCM.
>>
>> Any ideas??
>>
>> Paul
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com