Michael,
I can replicate your observed behaviour by the following:
From the RDP, select the associated line on the top left.
When the Directory Number Configuration page appears, scroll down to
Line 1 on Device X where X is your RDP name.
If I leave the Display ID field(s) blank, I do not see any Calling
Name displayed whilst the destination phone is ringing.
If I complete this field (copy from the line configuration on the
associated phone, usually) then the Calling Name is displayed OK.
I may have other configuration/parameters set differently from you, but
these are the settings I alter to make this appear or not appear in my Lab.
What version of CUCM are you running? I am slighlty up level from
7.0.1, so it may work in my lab but not in _the_ Lab, if you follow me :-)
YMMV, but hope this helps.
regards
Peter
On 13/06/2012 17:39, michael.se...@compucom.com wrote:
Greetings,
I'm working on a MVA lab that's asking for the 4 digit calling number and the
name. MVA is working perfectly, but nothing I do seems to enable the calling
party name.
Has anyone been able to accomplish sending the calling name when making an MVA
call? If so please share how you did it. If I make the MVA call it only
presents the four digits which is ok, but it won't show the calling name until
the call is answered. I've read many articles, some of which provide
solutions that don't work and some that say it's not supported so I'm looking
for the definitive answer on whether this can be done or not.
Any feedback appreciated. Thank you, --ms
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
