Re: [OSL | CCIE_Voice] [OSL || CCIE VOICE ]
I can see 30 minutes if that is 30 minutes from the start of lab. I take notes of IPS and things like that before I start so i do not get started right away. But if it takes that long just to configure, you do need to speed up. I do dhcp before vlans. This is a time saver for me. Because the phones are not actually connected to your switch the only way to power cycle them before they register is to pull the power card. I used to do this to speed up the phones requesting an IP. Now i do DHCP first so if I do vlans in order... Sitea, b, the c By the time it get through site C, site a and site b have ips without me having to touch the phone. This is all assuming nothing in your config will stop dhcp from working correctly Sent from my iPhone On Feb 3, 2013, at 2:21 AM, Gurpreet Singh Kukreja tycoononway1...@gmail.com wrote: Ravi, You need to speed up. 30 minutes for these sections is too much.. What exactly in these two sections is taking too long for you? usually DHCP and VLANs should not take more than 10 to 15 minutes as far as my practice goes. Practice them over and over to build speed and accuracy. Regards G On Sat, Feb 2, 2013 at 11:11 PM, ie ravindra ieravin...@gmail.com wrote: Hi Mates , I have few questions on the real lab just to make up my speed. Thanks for all you guys I believe I have made my hardest part DialPlan two easier. my only clue is now AAR. but thanks for Jsutin and Cory I am evaluate those today. Now I got another problem. I am still following technology based lab approach since I am not too practiced device based aproach yet. But still I am getting 30 Mins to complete DHCP and VLAN section except NTP. will that be a problem in starting minutes in the real lab. Do you guys have any advices on that as well as the whole lab exam what ever the experiences you got in the real lab, Thanks , Ravi. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] [OSL || CCIE VOICE ]
Hi Mates , I have few questions on the real lab just to make up my speed. Thanks for all you guys I believe I have made my hardest part DialPlan two easier. my only clue is now AAR. but thanks for Jsutin and Cory I am evaluate those today. Now I got another problem. I am still following technology based lab approach since I am not too practiced device based aproach yet. But still I am getting 30 Mins to complete DHCP and VLAN section except NTP. will that be a problem in starting minutes in the real lab. Do you guys have any advices on that as well as the whole lab exam what ever the experiences you got in the real lab, Thanks , Ravi. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [OSL || CCIE VOICE ]
Ravi, You need to speed up. 30 minutes for these sections is too much.. What exactly in these two sections is taking too long for you? usually DHCP and VLANs should not take more than 10 to 15 minutes as far as my practice goes. Practice them over and over to build speed and accuracy. Regards G On Sat, Feb 2, 2013 at 11:11 PM, ie ravindra ieravin...@gmail.com wrote: Hi Mates , I have few questions on the real lab just to make up my speed. Thanks for all you guys I believe I have made my hardest part DialPlan two easier. my only clue is now AAR. but thanks for Jsutin and Cory I am evaluate those today. Now I got another problem. I am still following technology based lab approach since I am not too practiced device based aproach yet. But still I am getting 30 Mins to complete DHCP and VLAN section except NTP. will that be a problem in starting minutes in the real lab. Do you guys have any advices on that as well as the whole lab exam what ever the experiences you got in the real lab, Thanks , Ravi. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [OSL|CCIE Voice] no notification sound on ip phone for messages
this means you do not have all configuration completed. You need to check these few places: 1. user licensed for CUP in UCM 2. You have created the Application user for IPPM(PhoneMessenger) in UCM and the phone you are using the IPPM service on is associated with this Application user.. Also make sure this user is CTI enabled and that the passwords in UCM and Application IPPM are the same, also make sure the IPPM status is set to on. Additionally if you want to see presence updates make sure you have your SIP trunk from UCM to CUPS set properly and that the user that you want to see presence updates from has been associated with the line/DN. This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [OSL|CCIE Voice] no notification sound on ip phone for messages
And also check the Authenticate URL on Enterprise Parameters... On Mon, Jul 23, 2012 at 5:44 PM, Justin McIntyre justin.mcint...@blackbox.com wrote: this means you do not have all configuration completed. You need to check these few places: 1. user licensed for CUP in UCM 2. You have created the Application user for IPPM(PhoneMessenger) in UCM and the phone you are using the IPPM service on is associated with this Application user.. Also make sure this user is CTI enabled and that the passwords in UCM and Application IPPM are the same, also make sure the IPPM status is set to on. Additionally if you want to see presence updates make sure you have your SIP trunk from UCM to CUPS set properly and that the user that you want to see presence updates from has been associated with the line/DN. This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [OSL|CCIE Voice] no notification sound on ip phone for messages
Bruno Justin, I did enabled all these and even verified twice... what authentication url has to be there on enterprise parameters??/ thank you krishna. From: Bruno Nonogaki brun...@gmail.com To: Justin McIntyre justin.mcint...@blackbox.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Monday, July 23, 2012 4:39 PM Subject: Re: [OSL | CCIE_Voice] [OSL|CCIE Voice] no notification sound on ip phone for messages And also check the Authenticate URL on Enterprise Parameters... On Mon, Jul 23, 2012 at 5:44 PM, Justin McIntyre justin.mcint...@blackbox.com wrote: this means you do not have all configuration completed. You need to check these few places: 1. user licensed for CUP in UCM 2. You have created the Application user for IPPM(PhoneMessenger) in UCM and the phone you are using the IPPM service on is associated with this Application user.. Also make sure this user is CTI enabled and that the passwords in UCM and Application IPPM are the same, also make sure the IPPM status is set to on. Additionally if you want to see presence updates make sure you have your SIP trunk from UCM to CUPS set properly and that the user that you want to see presence updates from has been associated with the line/DN. This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [OSL|CCIE Voice] no notification sound on ip phone for messages
the authentication URL in enterprise parameters is so that the user can log into the IPPM service. If you are logged in then you have correctly setup the enterprise parameter. You probably did it by default when you changed the url from DNS based to IP based. Meaning you changed CUCMPUB to 10.10.210.10 within the URL. From: Krishna [vinayak_...@yahoo.com] Sent: Monday, July 23, 2012 5:59 PM To: Bruno Nonogaki; Justin McIntyre Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] [OSL|CCIE Voice] no notification sound on ip phone for messages Bruno Justin, I did enabled all these and even verified twice... what authentication url has to be there on enterprise parameters??/ thank you krishna. From: Bruno Nonogaki brun...@gmail.com To: Justin McIntyre justin.mcint...@blackbox.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Monday, July 23, 2012 4:39 PM Subject: Re: [OSL | CCIE_Voice] [OSL|CCIE Voice] no notification sound on ip phone for messages And also check the Authenticate URL on Enterprise Parameters... On Mon, Jul 23, 2012 at 5:44 PM, Justin McIntyre justin.mcint...@blackbox.commailto:justin.mcint...@blackbox.com wrote: this means you do not have all configuration completed. You need to check these few places: 1. user licensed for CUP in UCM 2. You have created the Application user for IPPM(PhoneMessenger) in UCM and the phone you are using the IPPM service on is associated with this Application user.. Also make sure this user is CTI enabled and that the passwords in UCM and Application IPPM are the same, also make sure the IPPM status is set to on. Additionally if you want to see presence updates make sure you have your SIP trunk from UCM to CUPS set properly and that the user that you want to see presence updates from has been associated with the line/DN. This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com