Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4
Hi Michal, As i can see that Clock source line command which is by default enable further can u give an example for both User Side and Network Side means can u past the commands that indicates both user and Network Side Thanks On Mon, Jul 1, 2013 at 7:00 PM, ccie_voice-requ...@onlinestudylist.comwrote: Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Re: How to configure Clocking for GW's (michael.se...@compucom.com) -- Message: 1 Date: Mon, 1 Jul 2013 15:09:31 + From: michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] How to configure Clocking for GW's Message-ID: E88AFBC60579234C886F57D49AC243A937026EA9@SPW099EXM06.compucom.local Content-Type: text/plain; charset=us-ascii How to set clocking for PSTN Router and Branch Routers Example using MGCP gateway: ! ! Question: Take clocking for Layer 1 from Network side. --Means PSTN is Network Side Your PRI clocking of layer 2 should be user side. --Means Branch takes clock from PSTN ! ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! ! BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! ! !Hope this helps clarify the clocking issues and configuration. ! ! Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems -- ___ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 89, Issue 4 * ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4
NETWORK SIDE: ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! USER SIDE BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4
Thank You Michael, Question asked about L1 should me NETWORK SIDE and L2 USER SIDE in that case controller t1 0/0/0 clock source line -L1 Network Side (This is by default enable no need to add it) and for L2: USER SIDE do we need to add any additional commands under serial interface 0/0/0:23 ? Thanks On Mon, Jul 1, 2013 at 9:29 PM, Sears, Michael (msears) michael.se...@compucom.com wrote: NETWORK SIDE: ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! USER SIDE BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! Michael Sears, CCIE(V)#38404 “Designing and Implementing Cisco Unified Communications on Unified Computing Systems” ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4
When you say L1 and L2 are you talking about layer 1 and 2 of the OSI Model? Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems From: CISCO CCIE VOICE [mailto:ccievoic...@gmail.com] Sent: Monday, July 01, 2013 12:58 PM To: Sears, Michael (msears) Cc: ccie_voice@onlinestudylist.com Subject: Re: CCIE_Voice Digest, Vol 89, Issue 4 Thank You Michael, Question asked about L1 should me NETWORK SIDE and L2 USER SIDE in that case controller t1 0/0/0 clock source line -L1 Network Side (This is by default enable no need to add it) and for L2: USER SIDE do we need to add any additional commands under serial interface 0/0/0:23 ? Thanks On Mon, Jul 1, 2013 at 9:29 PM, Sears, Michael (msears) michael.se...@compucom.commailto:michael.se...@compucom.com wrote: NETWORK SIDE: ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! USER SIDE BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4
Yes, i am saying Layer 1 and Layer 2 of ISO Model On Mon, Jul 1, 2013 at 10:53 PM, Sears, Michael (msears) michael.se...@compucom.com wrote: When you say L1 and L2 are you talking about layer 1 and 2 of the OSI Model? ** ** Michael Sears, CCIE(V)#38404 “Designing and Implementing Cisco Unified Communications on Unified Computing Systems” ** ** *From:* CISCO CCIE VOICE [mailto:ccievoic...@gmail.com] *Sent:* Monday, July 01, 2013 12:58 PM *To:* Sears, Michael (msears) *Cc:* ccie_voice@onlinestudylist.com *Subject:* Re: CCIE_Voice Digest, Vol 89, Issue 4 ** ** Thank You Michael, Question asked about L1 should me NETWORK SIDE and L2 USER SIDE in that case ** ** controller t1 0/0/0 clock source line -L1 Network Side (This is by default enable no need to add it) ** ** and for L2: USER SIDE do we need to add any additional commands under serial interface 0/0/0:23 ? ** ** Thanks ** ** ** ** On Mon, Jul 1, 2013 at 9:29 PM, Sears, Michael (msears) michael.se...@compucom.com wrote: NETWORK SIDE: ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! USER SIDE BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! Michael Sears, CCIE(V)#38404 “Designing and Implementing Cisco Unified Communications on Unified Computing Systems” ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com