Re: [OSL | CCIE_Voice] Called # manupulation under SRST circumstance
Hi Shingei, I misread your question. Please disregard for this scenario. Jeff From: givemeccievoice2...@gmail.com [mailto:givemeccievoice2...@gmail.com] Sent: Tuesday, January 18, 2011 8:30 AM To: 'ccie_voice@onlinestudylist.com' Subject: RE: [OSL | CCIE_Voice] Called # manupulation under SRST circumstance Hi Shingei, Do all of your manipulations on the gateway when doing H323. This will save time for SRST in the actual lab. Here is how I normally do it: RP 9[2-9]XX RL/RG - H323 GW No digit manipulation, no use calling party external phone number mask. Just send 4 digit extensions and number as dialed. On gateway, voice translation-rule 1 rule 1 /^5.$/ /555\0/ type any subscriber plan any isdn voice translation-rule 2 rule 1 /^9/ // type any subscriber plan any isdn voice translation-profile SUBSCRIBER translate called 1 translate calling 2 dial-peer voice 1 pots destination-pattern 9[2-9]..$ port 0/0/0:23 translation-profile out SUBSCRIBER The called # will show on the screen as 7 digits 777 and the calling # will be sent as 7 digits 555 (just using random numbers to illustrate my point) and both will have subscriber/isdn as type/plan. Now, when you fall back to SRST, all of your dialing will work and the correct manipulations will occur before sending out to the gateway. Avoid using num-exp and dial-plan pattern commands when possible. Also, make sure you have your incoming voip dial-peer to set the codec and dtmf, I assumed you have this in place and the digit manipulation was the only issue. Hope this helps, Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ShinGei Yong Sent: Tuesday, January 18, 2011 3:56 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Called # manupulation under SRST circumstance Hi, I've below setup, BR2 as a mgcp gw with fall-back configured. dial-peer voice 9001 pots description *** SRST TO US *** destination-pattern 9001[2-9]..[2-9].. port 0/0/0:23 prefix 001 ! num-exp 5... 90012123945... num-exp 1... 90016178631... ! When in fallback mode,BR2 users dialed the 4digit number to reach HQ, the number get expanded to matched the outbound POTS dp with no issue, the call can established successfully. Problem is the called# presented on ipphone,instead of 4digit, the screen display 90012123945001,this is not the desired result. I did configured "no supplementary-service h225-notify cid-update" and reloaded but the result remain. How do i achieve the 4digit display in this case? Thanks Shingei. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Called # manupulation under SRST circumstance
Hi Shingei, Do all of your manipulations on the gateway when doing H323. This will save time for SRST in the actual lab. Here is how I normally do it: RP 9[2-9]XX RL/RG - H323 GW No digit manipulation, no use calling party external phone number mask. Just send 4 digit extensions and number as dialed. On gateway, voice translation-rule 1 rule 1 /^5.$/ /555\0/ type any subscriber plan any isdn voice translation-rule 2 rule 1 /^9/ // type any subscriber plan any isdn voice translation-profile SUBSCRIBER translate called 1 translate calling 2 dial-peer voice 1 pots destination-pattern 9[2-9]..$ port 0/0/0:23 translation-profile out SUBSCRIBER The called # will show on the screen as 7 digits 777 and the calling # will be sent as 7 digits 555 (just using random numbers to illustrate my point) and both will have subscriber/isdn as type/plan. Now, when you fall back to SRST, all of your dialing will work and the correct manipulations will occur before sending out to the gateway. Avoid using num-exp and dial-plan pattern commands when possible. Also, make sure you have your incoming voip dial-peer to set the codec and dtmf, I assumed you have this in place and the digit manipulation was the only issue. Hope this helps, Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ShinGei Yong Sent: Tuesday, January 18, 2011 3:56 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Called # manupulation under SRST circumstance Hi, I've below setup, BR2 as a mgcp gw with fall-back configured. dial-peer voice 9001 pots description *** SRST TO US *** destination-pattern 9001[2-9]..[2-9].. port 0/0/0:23 prefix 001 ! num-exp 5... 90012123945... num-exp 1... 90016178631... ! When in fallback mode,BR2 users dialed the 4digit number to reach HQ, the number get expanded to matched the outbound POTS dp with no issue, the call can established successfully. Problem is the called# presented on ipphone,instead of 4digit, the screen display 90012123945001,this is not the desired result. I did configured "no supplementary-service h225-notify cid-update" and reloaded but the result remain. How do i achieve the 4digit display in this case? Thanks Shingei. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Called # manupulation under SRST circumstance
If you do the called # transformation prior to the POTS dial-peer then the caller phone display is affected. If you "prefix" in the pots dial-peer then the caller display is not affected. -- Vik Malhi CCIE #13890 Managing Partner / Instructor - IPexpert, Inc. Mailto: vma...@ipexpert.com Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat <http://www.ipexpert.com/chat> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, Voice, Wireless, Security & Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities <http://www.ipexpert.com/communities> and our public website at www.ipexpert.com <http://www.ipexpert.com/> From: ShinGei Yong Date: Tue, 18 Jan 2011 19:56:01 +0800 To: OSL Group Subject: [OSL | CCIE_Voice] Called # manupulation under SRST circumstance Hi, I've below setup, BR2 as a mgcp gw with fall-back configured. dial-peer voice 9001 pots description *** SRST TO US *** destination-pattern 9001[2-9]..[2-9].. port 0/0/0:23 prefix 001 ! num-exp 5... 90012123945... num-exp 1... 90016178631... ! When in fallback mode,BR2 users dialed the 4digit number to reach HQ, the number get expanded to matched the outbound POTS dp with no issue, the call can established successfully. Problem is the called# presented on ipphone,instead of 4digit, the screen display 90012123945001,this is not the desired result. I did configured "no supplementary-service h225-notify cid-update" and reloaded but the result remain. How do i achieve the 4digit display in this case? Thanks Shingei. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Called # manupulation under SRST circumstance
Hi, I've below setup, BR2 as a mgcp gw with fall-back configured. dial-peer voice 9001 pots description *** SRST TO US *** destination-pattern 9001[2-9]..[2-9].. port 0/0/0:23 prefix 001 ! num-exp 5... 90012123945... num-exp 1... 90016178631... ! When in fallback mode,BR2 users dialed the 4digit number to reach HQ, the number get expanded to matched the outbound POTS dp with no issue, the call can established successfully. Problem is the called# presented on ipphone,instead of 4digit, the screen display 90012123945001,this is not the desired result. I did configured "no supplementary-service h225-notify cid-update" and reloaded but the result remain. How do i achieve the 4digit display in this case? Thanks Shingei. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
