Re: [OSL | CCIE_Voice] Dtmf problem with MVA
I believe you have not applied the *allow-connection h323 to h323* command under *voice service voip *on your h323 gateway. On Thu, Dec 8, 2011 at 11:57 AM, Ray jonha...@yahoo.com wrote: also make sure the mobile voice access is setup under media resources and also make sure the 4 digit ext on the RDP has a check in the check box. *From:* Mohammed Al Baqari baqari.voic...@gmail.com *To:* 'ccielabrat' ccielab...@gmail.com; ccie_voice@onlinestudylist.com *Sent:* Thursday, December 8, 2011 12:13 AM *Subject:* Re: [OSL | CCIE_Voice] Dtmf problem with MVA Use the command “debug voice application” and post the output after your enter the DTMF digits. Regards, Mohammed Al Baqari *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *ccielabrat *Sent:* Tuesday, December 06, 2011 11:59 PM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] Dtmf problem with MVA I have MVA configured on my h323 router, with the appropriate dial peers as per the Cucm help pages. I am able to call into the piloting dn and I can hear the MVA application prompt me for my pin. When I press any digits, they are not recognized. I've tried to force a g711 codec and ensured Dtmf-relay is configured, but it doesn't change the problem. Has anyone run into this issue? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Dtmf problem with MVA
also make sure the mobile voice access is setup under media resources and also make sure the 4 digit ext on the RDP has a check in the check box. From: Mohammed Al Baqari baqari.voic...@gmail.com To: 'ccielabrat' ccielab...@gmail.com; ccie_voice@onlinestudylist.com Sent: Thursday, December 8, 2011 12:13 AM Subject: Re: [OSL | CCIE_Voice] Dtmf problem with MVA Use the command “debug voice application” and post the output after your enter the DTMF digits. Regards, Mohammed Al Baqari From:ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccielabrat Sent: Tuesday, December 06, 2011 11:59 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Dtmf problem with MVA I have MVA configured on my h323 router, with the appropriate dial peers as per the Cucm help pages. I am able to call into the piloting dn and I can hear the MVA application prompt me for my pin. When I press any digits, they are not recognized. I've tried to force a g711 codec and ensured Dtmf-relay is configured, but it doesn't change the problem. Has anyone run into this issue? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Dtmf problem with MVA
I have MVA configured on my h323 router, with the appropriate dial peers as per the Cucm help pages. I am able to call into the piloting dn and I can hear the MVA application prompt me for my pin. When I press any digits, they are not recognized. I've tried to force a g711 codec and ensured Dtmf-relay is configured, but it doesn't change the problem. Has anyone run into this issue? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
