Re: [OSL | CCIE_Voice] Intergration of Unit express with SRST router
I'm looking at Unity Express 8.0.2 running on a 2911 with IOS 15.1.2T, I have call-manager-fallback setup and the phones work fine, but when I press Messages I get a fast busy, dialing the CTI Route Point for the Auto Attendant also fails from PSTN/PRI. I'm re-reading the manual, maybe I missed something but I thought the Messages button would work with SRST 8x From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mritunjay Kumar Sent: Tuesday, November 23, 2010 10:04 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Intergration of Unit express with SRST router Hi All, how to integrate unity express with SRST router when it is registered to cucm through JTAPI and loses connectivity with cucm ? CUE is installed in SRST router. any pointer ? Regards, Mj - Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Intergration of Unit express with SRST router
Did you setup a dial-peer for the CUE pilot number and how does your SRST configs look? On Wed, Nov 24, 2010 at 8:37 AM, Jason Aarons (US) jason.aar...@us.didata.com wrote: I’m looking at Unity Express 8.0.2 running on a 2911 with IOS 15.1.2T, I have call-manager-fallback setup and the phones work fine, but when I press Messages I get a fast busy, dialing the CTI Route Point for the Auto Attendant also fails from PSTN/PRI. I’m re-reading the manual, maybe I missed something but I thought the Messages button would work with SRST 8x *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Mritunjay Kumar *Sent:* Tuesday, November 23, 2010 10:04 AM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] Intergration of Unit express with SRST router Hi All, how to integrate unity express with SRST router when it is registered to cucm through JTAPI and loses connectivity with cucm ? CUE is installed in SRST router. any pointer ? Regards, Mj -- *Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. * ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Intergration of Unit express with SRST router
So the default dial peer for the auto attendant already points to CallManager, should I add the same autoattendant dial peers with a higher preference to the ip address of the CUE for SRST? So normal route is via CallManager/CTI Route Point but during wan failure those timeout and it goes direct to CUE? Since the phones are SIP for use with SIP SRST , I had this which doesn't account for the CUE AA when WAN is down; voice register pool 1 id network 10.1.222.0 mask 255.255.255.0 preference 1 incoming called-number dtmf-relay rtp-nte voice-class codec 1 From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Adam Thompson Sent: Tuesday, November 23, 2010 1:54 PM To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Intergration of Unit express with SRST router Take a look here: http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml#srst HTH -Adam On Tue, Nov 23, 2010 at 10:03 AM, Mritunjay Kumar mjs...@gmail.commailto:mjs...@gmail.com wrote: Hi All, how to integrate unity express with SRST router when it is registered to cucm through JTAPI and loses connectivity with cucm ? CUE is installed in SRST router. any pointer ? Regards, Mj ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com - Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Intergration of Unit express with SRST router
Hi Jason, In SRST you should point to a dial-peer that goes directly to CUE. Also add the voicemail command under telephony or voice register global that matches this pilot number. For example: Dial-peer voice 1 voip Destination-pattern 3600 Session target CUE IP address Session protocol sipv2 No vad Dtmf-relay sip-notify Codec g711ulaw You may also need a translation-profile to make the integration work. Also, for MWI to still work you would need the following: Voice service voip Sip Bind all source Loop or voice vlan Sip-ua Mwi-service ipv4:cue ip unsolicited Hope this helps, Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jason Aarons (US) Sent: Wednesday, November 24, 2010 12:32 PM To: Adam Thompson; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Intergration of Unit express with SRST router So the default dial peer for the auto attendant already points to CallManager, should I add the same autoattendant dial peers with a higher preference to the ip address of the CUE for SRST? So normal route is via CallManager/CTI Route Point but during wan failure those timeout and it goes direct to CUE? Since the phones are SIP for use with SIP SRST , I had this which doesn't account for the CUE AA when WAN is down; voice register pool 1 id network 10.1.222.0 mask 255.255.255.0 preference 1 incoming called-number dtmf-relay rtp-nte voice-class codec 1 From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Adam Thompson Sent: Tuesday, November 23, 2010 1:54 PM To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Intergration of Unit express with SRST router Take a look here: http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration _example09186a0080289ef0.shtml#srst HTH -Adam On Tue, Nov 23, 2010 at 10:03 AM, Mritunjay Kumar mjs...@gmail.com wrote: Hi All, how to integrate unity express with SRST router when it is registered to cucm through JTAPI and loses connectivity with cucm ? CUE is installed in SRST router. any pointer ? Regards, Mj ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _ Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Intergration of Unit express with SRST router
Hi All, how to integrate unity express with SRST router when it is registered to cucm through JTAPI and loses connectivity with cucm ? CUE is installed in SRST router. any pointer ? Regards, Mj ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Intergration of Unit express with SRST router
Take a look here: http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml#srst http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml#srst HTH -Adam On Tue, Nov 23, 2010 at 10:03 AM, Mritunjay Kumar mjs...@gmail.com wrote: Hi All, how to integrate unity express with SRST router when it is registered to cucm through JTAPI and loses connectivity with cucm ? CUE is installed in SRST router. any pointer ? Regards, Mj ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
