It is the default, so it will not show. You only need the command if you are
emulating the network.
From: Ramcharan Arya mailto:ramcharan.a...@gmail.com>>
Date: Thursday, April 4, 2013 9:54 AM
To: "ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com>"
mailto:ccie_voice@onlinestudylist.com>>
Subject: [OSL | CCIE_Voice] Lab 1: Task 3.1 : 5 Lab Handbook - workbook lab
Hi,
I have question regarding User-side Q.921/Q.931 Signalling
when I configure my gateway will full T1 PRI
command isdn protocol-emulate user does not appear under D channel
configuration.
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
isdn map address 911 plan isdn type unknown
isdn map address [2-9]..$ plan isdn type subscriber
isdn map address 1[2-9]..[2-9]..$ plan isdn type national
isdn outgoing display-ie
isdn outgoing ie redirecting-number
no cdp enable
Do we need to add this command manual.? WB says it is by default.
Please let us know your thoughts
Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com