Re: [OSL | CCIE_Voice] Live Record.
hi Mike, Thanks, I just tested. And when I ended Live record, it did end recording. However when i try to call 4250 again or press LiveRecord again, it always busy. Do you know if any command i missed? K From: michael.se...@compucom.com michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Cc: karen.johnson...@yahoo.ca Sent: Friday, August 9, 2013 10:26:29 AM Subject: RE: Live Record. Karen, To stop the live record session you should press the live record softkey again and it will end the recording and send to voicemail. If you just disconnect the recording will continue. --Michael Message: 6 Date: Fri, 9 Aug 2013 07:27:47 -0700 (PDT) From: Karen Johnson karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] LiveRecord Message-ID: 1376058467.46146.yahoomail...@web163906.mail.gq1.yahoo.com Content-Type: text/plain; charset=us-ascii hi folks. After I press Live Record and press disconnected to end conversation , why the Live Record session still stay? is this expected or any configuration we need? K___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record.
Karen, What does your telephony-service, ephone-dn and CUE configuration look like? If it worked don't think is your configuration, maybe need to reset the CUE module. --Michael Michael Sears, CCIE(V)#38404, CCNA, CCNA-Voice, CCNP-Voice Cisco Certified Unified Communications Computing Systems Specialist (UCS) Cisco Certified Unified Communications Manager Express Specialist (CUCME) E911 Infrastructure Specialist (CER) Designing and Implementing Cisco Unified Communications on Unified Computing Systems From: Karen Johnson [mailto:karen.johnson...@yahoo.ca] Sent: Saturday, August 10, 2013 6:13 PM To: Sears, Michael (msears); ccie_voice@onlinestudylist.com Subject: Re: Live Record. hi Mike, Thanks, I just tested. And when I ended Live record, it did end recording. However when i try to call 4250 again or press LiveRecord again, it always busy. Do you know if any command i missed? K From: michael.se...@compucom.commailto:michael.se...@compucom.com michael.se...@compucom.commailto:michael.se...@compucom.com To: ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com Cc: karen.johnson...@yahoo.camailto:karen.johnson...@yahoo.ca Sent: Friday, August 9, 2013 10:26:29 AM Subject: RE: Live Record. Karen, To stop the live record session you should press the live record softkey again and it will end the recording and send to voicemail. If you just disconnect the recording will continue. --Michael Message: 6 Date: Fri, 9 Aug 2013 07:27:47 -0700 (PDT) From: Karen Johnson karen.johnson...@yahoo.camailto:karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] LiveRecord Message-ID: 1376058467.46146.yahoomail...@web163906.mail.gq1.yahoo.commailto:1376058467.46146.yahoomail...@web163906.mail.gq1.yahoo.com Content-Type: text/plain; charset=us-ascii hi folks. After I press Live Record and press disconnected to end conversation , why the Live Record session still stay? is this expected or any configuration we need? K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record.
hi Mike, below is config. - telephony-service live-record 4250 ephone-dn 5 octo number 4250 no-reg-both call-forward all 4220 CUE : voicmeial live-record pilot number 4250 K From: michael.se...@compucom.com michael.se...@compucom.com To: karen.johnson...@yahoo.ca; ccie_voice@onlinestudylist.com Sent: Saturday, August 10, 2013 7:02:38 PM Subject: RE: Live Record. Karen, What does your telephony-service, ephone-dn and CUE configuration look like? If it worked don’t think is your configuration, maybe need to reset the CUE module. --Michael Michael Sears, CCIE(V)#38404, CCNA, CCNA-Voice, CCNP-Voice Cisco Certified Unified Communications Computing Systems Specialist (UCS) Cisco Certified Unified Communications Manager Express Specialist (CUCME) E911 Infrastructure Specialist (CER) “Designing and Implementing Cisco Unified Communications on Unified Computing Systems” From:Karen Johnson [mailto:karen.johnson...@yahoo.ca] Sent: Saturday, August 10, 2013 6:13 PM To: Sears, Michael (msears); ccie_voice@onlinestudylist.com Subject: Re: Live Record. hi Mike, Thanks, I just tested. And when I ended Live record, it did end recording. However when i try to call 4250 again or press LiveRecord again, it always busy. Do you know if any command i missed? K From:michael.se...@compucom.com michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Cc: karen.johnson...@yahoo.ca Sent: Friday, August 9, 2013 10:26:29 AM Subject: RE: Live Record. Karen, To stop the live record session you should press the live record softkey again and it will end the recording and send to voicemail. If you just disconnect the recording will continue. --Michael Message: 6 Date: Fri, 9 Aug 2013 07:27:47 -0700 (PDT) From: Karen Johnson karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] LiveRecord Message-ID: 1376058467.46146.yahoomail...@web163906.mail.gq1.yahoo.com Content-Type: text/plain; charset=us-ascii hi folks. After I press Live Record and press disconnected to end conversation , why the Live Record session still stay? is this expected or any configuration we need? K___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record.
Karen, To stop the live record session you should press the live record softkey again and it will end the recording and send to voicemail. If you just disconnect the recording will continue. --Michael Message: 6 Date: Fri, 9 Aug 2013 07:27:47 -0700 (PDT) From: Karen Johnson karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] LiveRecord Message-ID: 1376058467.46146.yahoomail...@web163906.mail.gq1.yahoo.com Content-Type: text/plain; charset=us-ascii hi folks. After I press Live Record and press disconnected to end conversation , why the Live Record session still stay? is this expected or any configuration we need? K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
Its not supposed to get involved in this discussion but Edger there was another 100K way to say the same thing in more respectful way Amit Note is Valid and i see Ken accept it and clarify where he come from , i agree this is a open Alias and anyone can ask anything , but please allow me to remind you that the last goal of anyone participate in this alias is to be Expert of Cisco so it will be good to have expert level of question going in here ( any Questions always welcomed) based on my small experience in this Certificate , you have to exhaust all the local resources you have before email the alias because the answer you got in a second will be forgotten in a second later . Respectfully , Ash On Mon, Nov 28, 2011 at 12:20 AM, Edgar Feliz ejzi...@gmail.com wrote: Hi ken, Don't pay attention to A Mitstake... You can ask all the questions you want here.. he is not the boss of us... If he does not want to participate in a discussion he should just keep his trap shut. E On Mon, Nov 28, 2011 at 12:20 AM, Ken Wyan kew...@gmail.com wrote: Dear Sir (Amit), Thanks for your encouragement. Keep it going. Ken ( before asking forum , I saw LiveRcd available in CUCME , but in none of CUCM softkey templates had it or couldn't add for a new softkey template ) On Mon, Nov 28, 2011 at 10:25 AM, Amit Singh batraji...@yahoo.com wrote: Mate I guess u can login into cucm and have a quick look. I am 100% sure that is much faster than typing this email. Mate seems like ur not putting any efforts in studying from your side. Regards Amit Sent from my iPad On 28/11/2011, at 4:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
Out of the topic Live record is a nice feature but when you conference in someone with live record, you have these 1/2 secs of MoH (depending on how fast you are) which could be nice to be able to avoid. Could be nice if Cisco had developped a new button/softkey that you could be programmed for multiple CUCM actions at the same time (like conference + speed dial) Julien 2011/11/28 Ashraf Ayyash ash.ayy...@gmail.com Yes Edger , this is correct , its also documented in the CUC Admin guide , Ash On Mon, Nov 28, 2011 at 12:17 AM, Edgar Feliz ejzi...@gmail.com wrote: I think Ash means you have to have a CTI route point with the # you will call to record and have that forward all to VM/CUC. When you are on a call then you can hit the conference soft-key and put in the number mentioned above from the route-point and conference soft-key again to start recording but there is not single key option...not that I am aware off. E PS Amit Questions are allowed to be asked here if you don't want to participate you don't have too mate. On Sun, Nov 27, 2011 at 11:49 PM, Ashraf Ayyash ash.ayy...@gmail.com wrote: NO , you have to create conferance call with the Live record number Ash On Sun, Nov 27, 2011 at 9:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
Agree , if its not yet improved on CCM 8.5 , 8.6 then i am sure that there is enhancement defect opened for this and it will be deployed much better in the newer CCM/CUC releases , i am going through CCM 8.6 these days , if any useful info will show up i will share it here Ash On Mon, Nov 28, 2011 at 2:00 AM, Julien Krieger krieger.jul...@gmail.com wrote: Out of the topic Live record is a nice feature but when you conference in someone with live record, you have these 1/2 secs of MoH (depending on how fast you are) which could be nice to be able to avoid. Could be nice if Cisco had developped a new button/softkey that you could be programmed for multiple CUCM actions at the same time (like conference + speed dial) Julien 2011/11/28 Ashraf Ayyash ash.ayy...@gmail.com Yes Edger , this is correct , its also documented in the CUC Admin guide , Ash On Mon, Nov 28, 2011 at 12:17 AM, Edgar Feliz ejzi...@gmail.com wrote: I think Ash means you have to have a CTI route point with the # you will call to record and have that forward all to VM/CUC. When you are on a call then you can hit the conference soft-key and put in the number mentioned above from the route-point and conference soft-key again to start recording but there is not single key option...not that I am aware off. E PS Amit Questions are allowed to be asked here if you don't want to participate you don't have too mate. On Sun, Nov 27, 2011 at 11:49 PM, Ashraf Ayyash ash.ayy...@gmail.com wrote: NO , you have to create conferance call with the Live record number Ash On Sun, Nov 27, 2011 at 9:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
He can ask any voice related question he wants...Let us know when you get your number since you seem to know it all. -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Amit Singh Sent: Sunday, November 27, 2011 11:56 PM To: Ken Wyan Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Live Record Mate I guess u can login into cucm and have a quick look. I am 100% sure that is much faster than typing this email. Mate seems like ur not putting any efforts in studying from your side. Regards Amit Sent from my iPad On 28/11/2011, at 4:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Live Record
Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
NO , you have to create conferance call with the Live record number Ash On Sun, Nov 27, 2011 at 9:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
Thanks. On Mon, Nov 28, 2011 at 10:19 AM, Ashraf Ayyash ash.ayy...@gmail.comwrote: NO , you have to create conferance call with the Live record number Ash On Sun, Nov 27, 2011 at 9:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
Mate I guess u can login into cucm and have a quick look. I am 100% sure that is much faster than typing this email. Mate seems like ur not putting any efforts in studying from your side. Regards Amit Sent from my iPad On 28/11/2011, at 4:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
Dear Sir (Amit), Thanks for your encouragement. Keep it going. Ken ( before asking forum , I saw LiveRcd available in CUCME , but in none of CUCM softkey templates had it or couldn't add for a new softkey template ) On Mon, Nov 28, 2011 at 10:25 AM, Amit Singh batraji...@yahoo.com wrote: Mate I guess u can login into cucm and have a quick look. I am 100% sure that is much faster than typing this email. Mate seems like ur not putting any efforts in studying from your side. Regards Amit Sent from my iPad On 28/11/2011, at 4:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
I think Ash means you have to have a CTI route point with the # you will call to record and have that forward all to VM/CUC. When you are on a call then you can hit the conference soft-key and put in the number mentioned above from the route-point and conference soft-key again to start recording but there is not single key option...not that I am aware off. E PS Amit Questions are allowed to be asked here if you don't want to participate you don't have too mate. On Sun, Nov 27, 2011 at 11:49 PM, Ashraf Ayyash ash.ayy...@gmail.comwrote: NO , you have to create conferance call with the Live record number Ash On Sun, Nov 27, 2011 at 9:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
Hi ken, Don't pay attention to A Mitstake... You can ask all the questions you want here.. he is not the boss of us... If he does not want to participate in a discussion he should just keep his trap shut. E On Mon, Nov 28, 2011 at 12:20 AM, Ken Wyan kew...@gmail.com wrote: Dear Sir (Amit), Thanks for your encouragement. Keep it going. Ken ( before asking forum , I saw LiveRcd available in CUCME , but in none of CUCM softkey templates had it or couldn't add for a new softkey template ) On Mon, Nov 28, 2011 at 10:25 AM, Amit Singh batraji...@yahoo.com wrote: Mate I guess u can login into cucm and have a quick look. I am 100% sure that is much faster than typing this email. Mate seems like ur not putting any efforts in studying from your side. Regards Amit Sent from my iPad On 28/11/2011, at 4:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
Yes Edger , this is correct , its also documented in the CUC Admin guide , Ash On Mon, Nov 28, 2011 at 12:17 AM, Edgar Feliz ejzi...@gmail.com wrote: I think Ash means you have to have a CTI route point with the # you will call to record and have that forward all to VM/CUC. When you are on a call then you can hit the conference soft-key and put in the number mentioned above from the route-point and conference soft-key again to start recording but there is not single key option...not that I am aware off. E PS Amit Questions are allowed to be asked here if you don't want to participate you don't have too mate. On Sun, Nov 27, 2011 at 11:49 PM, Ashraf Ayyash ash.ayy...@gmail.com wrote: NO , you have to create conferance call with the Live record number Ash On Sun, Nov 27, 2011 at 9:52 PM, Ken Wyan kew...@gmail.com wrote: Is Live Record Softkey (LiveRcd) available with CUCM ( Call Manager Server based system ) ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] live-record no bip
I haven't tried this but from the CUC help pages, you should be able to disable the beep completely by changing the timeout to zero. The following procedure is optional. It adjusts the interval between beeps while Cisco Unity Connection is recording a phone conversation. To Adjust the Live Record Beep Interval (Optional) Step 1 In Cisco Unity Connection Administration, expand *System Settings*, then click *Advanced Telephony*. 1. On the Telephony Configuration page, in the Live Record Beep Interval in Milliseconds field, enter the interval (in milliseconds) between beeps when a phone conversation is being recorded by using the live record feature. If the setting is blank, the interval is 15,000 milliseconds. If the setting is 0, the beep is disabled. 2. Click *Save*. On Fri, Nov 25, 2011 at 9:52 PM, Edgar Feliz ejzi...@gmail.com wrote: If given the task of configuring live-record but part of the requirement states that the TONE NOT be played back to the users when recording has begun, how is this done? I have looked in CUC and CCM and don't see a way to stop this. E ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] live-record no bip
No that is not it I had tried what you said below. I found it in the CUCM service parameters. Party Entrance Tone https://10.10.210.10:8443/ccmadmin/serviceParamSave.do?showall=false#[image: Required Field] True False True Set this to false and you do not get a tone at the other side. E On Sat, Nov 26, 2011 at 8:10 AM, Gregg Malcolm gregg.malc...@gmail.comwrote: I haven't tried this but from the CUC help pages, you should be able to disable the beep completely by changing the timeout to zero. The following procedure is optional. It adjusts the interval between beeps while Cisco Unity Connection is recording a phone conversation. To Adjust the Live Record Beep Interval (Optional) Step 1 In Cisco Unity Connection Administration, expand *System Settings*, then click *Advanced Telephony*. 1. On the Telephony Configuration page, in the Live Record Beep Interval in Milliseconds field, enter the interval (in milliseconds) between beeps when a phone conversation is being recorded by using the live record feature. If the setting is blank, the interval is 15,000 milliseconds. If the setting is 0, the beep is disabled. 2. Click *Save*. On Fri, Nov 25, 2011 at 9:52 PM, Edgar Feliz ejzi...@gmail.com wrote: If given the task of configuring live-record but part of the requirement states that the TONE NOT be played back to the users when recording has begun, how is this done? I have looked in CUC and CCM and don't see a way to stop this. E ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] live-record no bip
If given the task of configuring live-record but part of the requirement states that the TONE NOT be played back to the users when recording has begun, how is this done? I have looked in CUC and CCM and don't see a way to stop this. E ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Live Record
Yes because cbarge works. On Wed, Jun 23, 2010 at 9:37 PM, Jeff Price (jeffpric) jeffp...@cisco.com wrote: Do you have conferencing resources configured? Jeff -Original Message- From: ccieid1ot [mailto:ccieid...@gmail.com] Sent: Wednesday, June 23, 2010 7:10 PM To: Jeff Price (jeffpric) Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Live Record Oh, and I have set the Live record pilot in CUE GUI, verified that voicemail live-record pilot set to 4250. On Wed, Jun 23, 2010 at 9:09 PM, ccieid1ot ccieid...@gmail.com wrote: Amy, SC Ph1 does have an active VM box since I can leave a VM and retrieved it. Jeff, Here's my config for Live Record Telephony-system live-record 4250 ephone-dn 20 oct number 4250 call-forward all 4220 dial-peer voice 4220 voip destination-pattern 42.. blah blah blah On Wed, Jun 23, 2010 at 2:55 PM, Jeff Price (jeffpric) jeffp...@cisco.com wrote: I'm not sure for that specific problem. But I would make sure you have the following: - correct pilot number configured under telephony-service - a dial-peer that forwards all to cue - a working dial-peer for cue - conferencing configured - the cue pilot number configured in cue I'm leaning towards the cue pilot number not being configured. I believe its on a page called VM Configuration Jeff -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccieid1ot Sent: Wednesday, June 23, 2010 11:22 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Live Record What would be the problem when trying to use Live Record and I get a, this mailbox is inactive? Is this a license issue? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Live Record
I'm not sure for that specific problem. But I would make sure you have the following: - correct pilot number configured under telephony-service - a dial-peer that forwards all to cue - a working dial-peer for cue - conferencing configured - the cue pilot number configured in cue I'm leaning towards the cue pilot number not being configured. I believe its on a page called VM Configuration Jeff -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccieid1ot Sent: Wednesday, June 23, 2010 11:22 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Live Record What would be the problem when trying to use Live Record and I get a, this mailbox is inactive? Is this a license issue? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Live Record
Amy, SC Ph1 does have an active VM box since I can leave a VM and retrieved it. Jeff, Here's my config for Live Record Telephony-system live-record 4250 ephone-dn 20 oct number 4250 call-forward all 4220 dial-peer voice 4220 voip destination-pattern 42.. blah blah blah On Wed, Jun 23, 2010 at 2:55 PM, Jeff Price (jeffpric) jeffp...@cisco.com wrote: I'm not sure for that specific problem. But I would make sure you have the following: - correct pilot number configured under telephony-service - a dial-peer that forwards all to cue - a working dial-peer for cue - conferencing configured - the cue pilot number configured in cue I'm leaning towards the cue pilot number not being configured. I believe its on a page called VM Configuration Jeff -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccieid1ot Sent: Wednesday, June 23, 2010 11:22 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Live Record What would be the problem when trying to use Live Record and I get a, this mailbox is inactive? Is this a license issue? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Live Record
Oh, and I have set the Live record pilot in CUE GUI, verified that voicemail live-record pilot set to 4250. On Wed, Jun 23, 2010 at 9:09 PM, ccieid1ot ccieid...@gmail.com wrote: Amy, SC Ph1 does have an active VM box since I can leave a VM and retrieved it. Jeff, Here's my config for Live Record Telephony-system live-record 4250 ephone-dn 20 oct number 4250 call-forward all 4220 dial-peer voice 4220 voip destination-pattern 42.. blah blah blah On Wed, Jun 23, 2010 at 2:55 PM, Jeff Price (jeffpric) jeffp...@cisco.com wrote: I'm not sure for that specific problem. But I would make sure you have the following: - correct pilot number configured under telephony-service - a dial-peer that forwards all to cue - a working dial-peer for cue - conferencing configured - the cue pilot number configured in cue I'm leaning towards the cue pilot number not being configured. I believe its on a page called VM Configuration Jeff -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccieid1ot Sent: Wednesday, June 23, 2010 11:22 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Live Record What would be the problem when trying to use Live Record and I get a, this mailbox is inactive? Is this a license issue? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Live Record
Do you have conferencing resources configured? Jeff -Original Message- From: ccieid1ot [mailto:ccieid...@gmail.com] Sent: Wednesday, June 23, 2010 7:10 PM To: Jeff Price (jeffpric) Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Live Record Oh, and I have set the Live record pilot in CUE GUI, verified that voicemail live-record pilot set to 4250. On Wed, Jun 23, 2010 at 9:09 PM, ccieid1ot ccieid...@gmail.com wrote: Amy, SC Ph1 does have an active VM box since I can leave a VM and retrieved it. Jeff, Here's my config for Live Record Telephony-system live-record 4250 ephone-dn 20 oct number 4250 call-forward all 4220 dial-peer voice 4220 voip destination-pattern 42.. blah blah blah On Wed, Jun 23, 2010 at 2:55 PM, Jeff Price (jeffpric) jeffp...@cisco.com wrote: I'm not sure for that specific problem. But I would make sure you have the following: - correct pilot number configured under telephony-service - a dial-peer that forwards all to cue - a working dial-peer for cue - conferencing configured - the cue pilot number configured in cue I'm leaning towards the cue pilot number not being configured. I believe its on a page called VM Configuration Jeff -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccieid1ot Sent: Wednesday, June 23, 2010 11:22 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Live Record What would be the problem when trying to use Live Record and I get a, this mailbox is inactive? Is this a license issue? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] LIVE RECORD ON UNITY CONNECTION
Hello, From Vol 2 lab 1, how do you test the Live record after configuration Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] LIVE RECORD ON UNITY CONNECTION
Dial the live record number or conference the live record number in. Forgot which one it asked. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ABIOLA ADEFILA Sent: Thursday, October 01, 2009 5:13 AM To: OSL Group Subject: [OSL | CCIE_Voice] LIVE RECORD ON UNITY CONNECTION Hello, From Vol 2 lab 1, how do you test the Live record after configuration Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
