Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
As far I was aware those parameters are just for 6608 GW running as MGCP.
You should not be using those for auto config.
Basically if you want to configure a fractional, just throug the command
manually and modify the timeslots when you configure your pri-group.
On Sun, Apr 28, 2013 at 4:09 AM, Suresh Bhandari bring...@gmail.com wrote:
I believe that when you configure fractional PRI from IOS, and if you have
to expand the channels later, you have to reconfigure mgcp... that is you
have to shut your voice port, controller, bind-l3 command in the D-channel
etc
On the other hand, if you have busy out the channels from the UCM, you can
simply change the channels to required numbers, and save the service
parameter.
Please update if there are other, must be there, benefits.
HTH | TIA
On Sun, Apr 28, 2013 at 4:50 PM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
What is the purpose of doing busy out channels from 7-23 if we are its
not using Fractional PRI ,If we are busy out channel from 7-23 which means
that we are using only 6 channels so its a fractional PRI line
Please Experts correct us on ths...
Thanks
On Sun, Apr 28, 2013 at 11:28 AM, Suresh Bhandari bring...@gmail.comwrote:
If you are busying out the channels in CUCM using automatic mgcp
configuration, it will not be Fractional PRI... Experts, please correct me
if I am wrong!
On Sun, Apr 28, 2013 at 2:01 PM, CISCO CCIE VOICE ccievoic...@gmail.com
wrote:
HI Thanks Again, So i can use Fractional T1/E1 PRI with Automatic
MGCP Configuration?
On Sun, Apr 28, 2013 at 10:56 AM, Suresh Bhandari
bring...@gmail.comwrote:
Regarding your question about busyout channels in CUCM, you will use
the MGCP gateway address as appeared in your CUCM gateway page and busyout
channels using 1.
You can find a good example by clicking the parameter.
For your reference, for say your SA site, the SP Change B-Channel
Maintenance Status 1 will be S0/SU0/DS1-0@*SA-RTR* = 0011
to busyout channels 7-23.
Notice the boldface text that represents your gateway.
Further, you have to check Enable status Poll in your gateway page.
Hope this helps.
On Sun, Apr 28, 2013 at 12:45 PM, CISCO CCIE VOICE
ccievoic...@gmail.com wrote:
HI Thanks,
but if suppose i want to use 6 channel from T1 PRI on HQ Router and
12 channel of E1 PRI from Branch-2 router,so how can i busy out channels
under service parameter ? and how does CUCM knows about which router
interface to busy out as i have two site with different fractional PRI
Any reference or document on ths will be g8rt help...
thanks
On Sun, Apr 28, 2013 at 9:46 AM, Mohamed Gazzaz
mgaz...@hotmail.comwrote:
Pick up whatever method you are comfortable with and
practice, practice. practice ..
Try both methods and see which one is faster for you.
--
Date: Sun, 28 Apr 2013 09:10:30 +0300
From: ccievoic...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
Hi Experts
Which method to be use in CCIE Voice lab exam in order to configure
MGCP Auto or Manually.
Thanks
___ For more information
regarding industry leading CCIE Lab training, please visit
www.ipexpert.com Are you a CCNP or CCIE and looking for a job?
Check out www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
Suresh Bhandari
--
Suresh Bhandari
--
Suresh Bhandari
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
Robert Thomas Zamora
tho...@gmail.com +50689389544
http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
CCNP, CCNP Voice
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
[OSL | CCIE_Voice] MGCP Auto vs Manual configuration
Hi Experts Which method to be use in CCIE Voice lab exam in order to configure MGCP Auto or Manually. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
Pick up whatever method you are comfortable with and practice, practice. practice .. Try both methods and see which one is faster for you. Date: Sun, 28 Apr 2013 09:10:30 +0300 From: ccievoic...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration Hi Experts Which method to be use in CCIE Voice lab exam in order to configure MGCP Auto or Manually. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
HI Thanks, but if suppose i want to use 6 channel from T1 PRI on HQ Router and 12 channel of E1 PRI from Branch-2 router,so how can i busy out channels under service parameter ? and how does CUCM knows about which router interface to busy out as i have two site with different fractional PRI Any reference or document on ths will be g8rt help... thanks On Sun, Apr 28, 2013 at 9:46 AM, Mohamed Gazzaz mgaz...@hotmail.com wrote: Pick up whatever method you are comfortable with and practice, practice. practice .. Try both methods and see which one is faster for you. -- Date: Sun, 28 Apr 2013 09:10:30 +0300 From: ccievoic...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration Hi Experts Which method to be use in CCIE Voice lab exam in order to configure MGCP Auto or Manually. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008076f8d2.shtml Old versions, but has everything you need. regards Peter On 4/28/2013 8:00 AM, CISCO CCIE VOICE wrote: HI Thanks, but if suppose i want to use 6 channel from T1 PRI on HQ Router and 12 channel of E1 PRI from Branch-2 router,so how can i busy out channels under service parameter ? and how does CUCM knows about which router interface to busy out as i have two site with different fractional PRI Any reference or document on ths will be g8rt help... thanks On Sun, Apr 28, 2013 at 9:46 AM, Mohamed Gazzaz mgaz...@hotmail.com mailto:mgaz...@hotmail.com wrote: Pick up whatever method you are comfortable with and practice, practice. practice .. Try both methods and see which one is faster for you. Date: Sun, 28 Apr 2013 09:10:30 +0300 From: ccievoic...@gmail.com mailto:ccievoic...@gmail.com To: ccie_voice@onlinestudylist.com mailto:ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration Hi Experts Which method to be use in CCIE Voice lab exam in order to configure MGCP Auto or Manually. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com http://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
For fractional PRI you should use manual method. On Sun, Apr 28, 2013 at 12:45 PM, CISCO CCIE VOICE ccievoic...@gmail.comwrote: HI Thanks, but if suppose i want to use 6 channel from T1 PRI on HQ Router and 12 channel of E1 PRI from Branch-2 router,so how can i busy out channels under service parameter ? and how does CUCM knows about which router interface to busy out as i have two site with different fractional PRI Any reference or document on ths will be g8rt help... thanks On Sun, Apr 28, 2013 at 9:46 AM, Mohamed Gazzaz mgaz...@hotmail.comwrote: Pick up whatever method you are comfortable with and practice, practice. practice .. Try both methods and see which one is faster for you. -- Date: Sun, 28 Apr 2013 09:10:30 +0300 From: ccievoic...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration Hi Experts Which method to be use in CCIE Voice lab exam in order to configure MGCP Auto or Manually. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
Regarding your question about busyout channels in CUCM, you will use the MGCP gateway address as appeared in your CUCM gateway page and busyout channels using 1. You can find a good example by clicking the parameter. For your reference, for say your SA site, the SP Change B-Channel Maintenance Status 1 will be S0/SU0/DS1-0@*SA-RTR* = 0011 to busyout channels 7-23. Notice the boldface text that represents your gateway. Further, you have to check Enable status Poll in your gateway page. Hope this helps. On Sun, Apr 28, 2013 at 12:45 PM, CISCO CCIE VOICE ccievoic...@gmail.comwrote: HI Thanks, but if suppose i want to use 6 channel from T1 PRI on HQ Router and 12 channel of E1 PRI from Branch-2 router,so how can i busy out channels under service parameter ? and how does CUCM knows about which router interface to busy out as i have two site with different fractional PRI Any reference or document on ths will be g8rt help... thanks On Sun, Apr 28, 2013 at 9:46 AM, Mohamed Gazzaz mgaz...@hotmail.comwrote: Pick up whatever method you are comfortable with and practice, practice. practice .. Try both methods and see which one is faster for you. -- Date: Sun, 28 Apr 2013 09:10:30 +0300 From: ccievoic...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration Hi Experts Which method to be use in CCIE Voice lab exam in order to configure MGCP Auto or Manually. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
HI Thanks Again, So i can use Fractional T1/E1 PRI with Automatic MGCP Configuration? On Sun, Apr 28, 2013 at 10:56 AM, Suresh Bhandari bring...@gmail.comwrote: Regarding your question about busyout channels in CUCM, you will use the MGCP gateway address as appeared in your CUCM gateway page and busyout channels using 1. You can find a good example by clicking the parameter. For your reference, for say your SA site, the SP Change B-Channel Maintenance Status 1 will be S0/SU0/DS1-0@*SA-RTR* = 0011 to busyout channels 7-23. Notice the boldface text that represents your gateway. Further, you have to check Enable status Poll in your gateway page. Hope this helps. On Sun, Apr 28, 2013 at 12:45 PM, CISCO CCIE VOICE ccievoic...@gmail.comwrote: HI Thanks, but if suppose i want to use 6 channel from T1 PRI on HQ Router and 12 channel of E1 PRI from Branch-2 router,so how can i busy out channels under service parameter ? and how does CUCM knows about which router interface to busy out as i have two site with different fractional PRI Any reference or document on ths will be g8rt help... thanks On Sun, Apr 28, 2013 at 9:46 AM, Mohamed Gazzaz mgaz...@hotmail.comwrote: Pick up whatever method you are comfortable with and practice, practice. practice .. Try both methods and see which one is faster for you. -- Date: Sun, 28 Apr 2013 09:10:30 +0300 From: ccievoic...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration Hi Experts Which method to be use in CCIE Voice lab exam in order to configure MGCP Auto or Manually. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
If you are busying out the channels in CUCM using automatic mgcp
configuration, it will not be Fractional PRI... Experts, please correct me
if I am wrong!
On Sun, Apr 28, 2013 at 2:01 PM, CISCO CCIE VOICE ccievoic...@gmail.comwrote:
HI Thanks Again, So i can use Fractional T1/E1 PRI with Automatic
MGCP Configuration?
On Sun, Apr 28, 2013 at 10:56 AM, Suresh Bhandari bring...@gmail.comwrote:
Regarding your question about busyout channels in CUCM, you will use the
MGCP gateway address as appeared in your CUCM gateway page and busyout
channels using 1.
You can find a good example by clicking the parameter.
For your reference, for say your SA site, the SP Change B-Channel
Maintenance Status 1 will be S0/SU0/DS1-0@*SA-RTR* = 0011
to busyout channels 7-23.
Notice the boldface text that represents your gateway.
Further, you have to check Enable status Poll in your gateway page.
Hope this helps.
On Sun, Apr 28, 2013 at 12:45 PM, CISCO CCIE VOICE ccievoic...@gmail.com
wrote:
HI Thanks,
but if suppose i want to use 6 channel from T1 PRI on HQ Router and 12
channel of E1 PRI from Branch-2 router,so how can i busy out channels under
service parameter ? and how does CUCM knows about which router interface to
busy out as i have two site with different fractional PRI
Any reference or document on ths will be g8rt help...
thanks
On Sun, Apr 28, 2013 at 9:46 AM, Mohamed Gazzaz mgaz...@hotmail.comwrote:
Pick up whatever method you are comfortable with and
practice, practice. practice ..
Try both methods and see which one is faster for you.
--
Date: Sun, 28 Apr 2013 09:10:30 +0300
From: ccievoic...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
Hi Experts
Which method to be use in CCIE Voice lab exam in order to configure
MGCP Auto or Manually.
Thanks
___ For more information
regarding industry leading CCIE Lab training, please visit
www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check
out www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
Suresh Bhandari
--
Suresh Bhandari
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
I believe that when you configure fractional PRI from IOS, and if you have
to expand the channels later, you have to reconfigure mgcp... that is you
have to shut your voice port, controller, bind-l3 command in the D-channel
etc
On the other hand, if you have busy out the channels from the UCM, you can
simply change the channels to required numbers, and save the service
parameter.
Please update if there are other, must be there, benefits.
HTH | TIA
On Sun, Apr 28, 2013 at 4:50 PM, CISCO CCIE VOICE ccievoic...@gmail.comwrote:
What is the purpose of doing busy out channels from 7-23 if we are its
not using Fractional PRI ,If we are busy out channel from 7-23 which means
that we are using only 6 channels so its a fractional PRI line
Please Experts correct us on ths...
Thanks
On Sun, Apr 28, 2013 at 11:28 AM, Suresh Bhandari bring...@gmail.comwrote:
If you are busying out the channels in CUCM using automatic mgcp
configuration, it will not be Fractional PRI... Experts, please correct me
if I am wrong!
On Sun, Apr 28, 2013 at 2:01 PM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
HI Thanks Again, So i can use Fractional T1/E1 PRI with Automatic
MGCP Configuration?
On Sun, Apr 28, 2013 at 10:56 AM, Suresh Bhandari bring...@gmail.comwrote:
Regarding your question about busyout channels in CUCM, you will use
the MGCP gateway address as appeared in your CUCM gateway page and busyout
channels using 1.
You can find a good example by clicking the parameter.
For your reference, for say your SA site, the SP Change B-Channel
Maintenance Status 1 will be S0/SU0/DS1-0@*SA-RTR* = 0011
to busyout channels 7-23.
Notice the boldface text that represents your gateway.
Further, you have to check Enable status Poll in your gateway page.
Hope this helps.
On Sun, Apr 28, 2013 at 12:45 PM, CISCO CCIE VOICE
ccievoic...@gmail.com wrote:
HI Thanks,
but if suppose i want to use 6 channel from T1 PRI on HQ Router and
12 channel of E1 PRI from Branch-2 router,so how can i busy out channels
under service parameter ? and how does CUCM knows about which router
interface to busy out as i have two site with different fractional PRI
Any reference or document on ths will be g8rt help...
thanks
On Sun, Apr 28, 2013 at 9:46 AM, Mohamed Gazzaz
mgaz...@hotmail.comwrote:
Pick up whatever method you are comfortable with and
practice, practice. practice ..
Try both methods and see which one is faster for you.
--
Date: Sun, 28 Apr 2013 09:10:30 +0300
From: ccievoic...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
Hi Experts
Which method to be use in CCIE Voice lab exam in order to configure
MGCP Auto or Manually.
Thanks
___ For more information
regarding industry leading CCIE Lab training, please visit
www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check
out www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
Suresh Bhandari
--
Suresh Bhandari
--
Suresh Bhandari
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
