Re: [OSL | CCIE_Voice] Mobile Voice Access not working since many days!!

[Bill]

> dial-peer voice 102 voip
>  preference 2
>  destination-pattern 3300
>  session target ipv4:
>  dtmf-relay h245-alphanumeric
>  codec g711ulaw
>  no vad

Is site to site g711? Or is your CUCM local?

> application
> service cmm http:// Pub>:8080/ccmivr/pages/IVRMainpage.vxml

Did you get success when running this?

> Enable Mobile Voice access is set to True
> Mobile voice access number is  3300
> Matching caller id with Remote Destination is Partial Match
> Number of digits of Caller ID Partial Match is 7

Partial match is buggy in the lab version of CUCM
Did you set your mobile voice access number under media?



Does it work if you call from a phone at the site?
>From a phone at another site? 
And of course not working from PSTN 


Sent from my iPad

On Mar 17, 2013, at 7:53 AM, sanity insanity 
 wrote:

> Hello All,
> 
> 
> I have been trying this config for MVA  for close to 2 weeks now and it does 
> not work . Here are the details
> 
> 
> The Issue :
> == 
> 
> I am trying to Intiate a Call from PSTN phone to site B gateway (H323) 
> 3033300 it should ask for
> authentication once authenticated press 1 to make any 4 digit calls if it
> is from SB phone 1 . Make sure to display 4 digits number for calling number
> along with calling name "SB Phone 1" they can use local gateway to
> make the call.
> 
> Also 2nd line on PSTN phone should be used to dial 3033300 and you will
> prompted to login.
> 
> 
> 
> Details:
> =
> 
> My config is following
> 
> 1) The dial-peers are set in the following way
> 
> dial-peer voice 102 voip
>  preference 2
>  destination-pattern 3300
>  session target ipv4:
>  dtmf-relay h245-alphanumeric
>  codec g711ulaw
>  no vad
> !
> dial-peer voice 5 pots
>  service cmm
>  incoming called-number 3300
>  no digit-strip
> 
> 
> 2) here is the MVA service url
> !
> application
> service cmm http:// Pub>:8080/ccmivr/pages/IVRMainpage.vxml
> !
> 
> 
> 3) I am stripping 3033300 coming from pstn to last  4 digits  using a
> translation-rule on the voice-port level . That is 3033300 becomes 3300 when 
> it reaches CUCM.
> 
> 
> 4) On CUCM in the service parameters...
> 
> Enable Mobile Voice access is set to True
> Mobile voice access number is  3300
> Matching caller id with Remote Destination is Partial Match
> Number of digits of Caller ID Partial Match is 7
> 
> 5) The Mobility softkey has been added for "on hold" and "connected" at
> the softkey template level and applied to the phone ( SB PH1)
> 
> 
> 6)At the User  SB phone 1  I have enabled "Enable Mobility" and "Enable 
> Mobile Voice Access"
> also selected the MAC address of the phone
> 
> 
> 7) Created a Remote Dest profile and selected user id of sb ph1 and the
> correct calling search space for the phone
> 
> 
> 8) Added a Remoted Destination number of 9525
> 
> 
> 9) Also went to device > phone  and selected the Owner User ID of SB Ph1
> 
> 
> 10) Cisco Unified Mobile Voice Access Service is running on both Sub and Pub 
> on CUCM
> 
> 
> 
> Questions :
>  
> 
> 1) I now dial from the pstn line 9525 on the pstn phone to 3033300 . The 
> prompt I get asks me for a pin .
> I enter 1 and the call drops . I Even tried entering 12345 ( which the pin 
> for user SB Phone 1) and still the call drops after the prompt.
> Anything wrong the above config? Anything missing in the config ? Any 
> suggestions?
> 
> 
> 2) I am strip the number to last 4 digits ( as in step 3) . Is this correct 
> procedure?
> 
> 
> 3) There is also no QOS setup in the config for now . Anything related to 
> Bandwidth here?
> 
> 
> 
> 
> Please help!
> 
> 
> -MJ
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access not working since many days!!

[Peter Simmons]

Sounds like you didn't set the MVA details under Media Resources.

I usually get these symptoms if I forget to add this.

CUCM Administration/Media Resource/Mobile Voice Access - set the MVA 
number and locale.


Let us know how you get on?

regards

Peter

On 3/17/2013 12:53 PM, sanity insanity wrote:

Hello All,


I have been trying this config for MVA  for close to 2 weeks now and 
it does not work . Here are the details



The Issue :
==

I am trying to Intiate a Call from PSTN phone to site B gateway (H323) 
3033300 it should ask for

authentication once authenticated press 1 to make any 4 digit calls if it
is from SB phone 1 . Make sure to display 4 digits number for calling 
number

along with calling name "SB Phone 1" they can use local gateway to
make the call.

Also 2nd line on PSTN phone should be used to dial 3033300 and you will
prompted to login.



Details:
=

My config is following

1) The dial-peers are set in the following way

dial-peer voice 102 voip
 preference 2
 destination-pattern 3300
 session target ipv4:
 dtmf-relay h245-alphanumeric
 codec g711ulaw
 no vad
!
dial-peer voice 5 pots
 service cmm
 incoming called-number 3300
 no digit-strip


2) here is the MVA service url
!
application
service cmm http://Pub>:8080/ccmivr/pages/IVRMainpage.vxml

!


3) I am stripping 3033300 coming from pstn to last  4 digits using a
translation-rule on the voice-port level . That is 3033300 becomes 
3300 when it reaches CUCM.



4) On CUCM in the service parameters...

Enable Mobile Voice access is set to True
Mobile voice access number is  3300
Matching caller id with Remote Destination is Partial Match
Number of digits of Caller ID Partial Match is 7

5) The Mobility softkey has been added for "on hold" and "connected" at
the softkey template level and applied to the phone ( SB PH1)


6)At the User  SB phone 1  I have enabled "Enable Mobility" and 
"Enable Mobile Voice Access"

also selected the MAC address of the phone


7) Created a Remote Dest profile and selected user id of sb ph1 and the
correct calling search space for the phone


8) Added a Remoted Destination number of 9525


9) Also went to device > phone  and selected the Owner User ID of SB Ph1


10) Cisco Unified Mobile Voice Access Service is running on both Sub 
and Pub on CUCM




Questions :


1) I now dial from the pstn line 9525 on the pstn phone to 3033300 
. The prompt I get asks me for a pin .
I enter 1 and the call drops . I Even tried entering 12345 ( which the 
pin for user SB Phone 1) and still the call drops after the prompt.
Anything wrong the above config? Anything missing in the config ? Any 
suggestions?



2) I am strip the number to last 4 digits ( as in step 3) . Is this 
correct procedure?



3) There is also no QOS setup in the config for now . Anything related 
to Bandwidth here?





Please help!


-MJ



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Mobile Voice Access not working since many days!!

[sanity insanity]

Hello All,


I have been trying this config for MVA  for close to 2 weeks now and it
does not work . Here are the details


The Issue :
==

I am trying to Intiate a Call from PSTN phone to site B gateway (H323)
3033300 it should ask for
authentication once authenticated press 1 to make any 4 digit calls if it
is from SB phone 1 . Make sure to display 4 digits number for calling number
along with calling name "SB Phone 1" they can use local gateway to
make the call.

Also 2nd line on PSTN phone should be used to dial 3033300 and you will
prompted to login.



Details:
=

My config is following

1) The dial-peers are set in the following way

dial-peer voice 102 voip
 preference 2
 destination-pattern 3300
 session target ipv4:
 dtmf-relay h245-alphanumeric
 codec g711ulaw
 no vad
!
dial-peer voice 5 pots
 service cmm
 incoming called-number 3300
 no digit-strip


2) here is the MVA service url
!
application
service cmm http://:8080/ccmivr/pages/IVRMainpage.vxml
!


3) I am stripping 3033300 coming from pstn to last  4 digits  using a
translation-rule on the voice-port level . That is 3033300 becomes 3300
when it reaches CUCM.


4) On CUCM in the service parameters...

Enable Mobile Voice access is set to True
Mobile voice access number is  3300
Matching caller id with Remote Destination is Partial Match
Number of digits of Caller ID Partial Match is 7

5) The Mobility softkey has been added for "on hold" and "connected" at
the softkey template level and applied to the phone ( SB PH1)


6)At the User  SB phone 1  I have enabled "Enable Mobility" and "Enable
Mobile Voice Access"
also selected the MAC address of the phone


7) Created a Remote Dest profile and selected user id of sb ph1 and the
correct calling search space for the phone


8) Added a Remoted Destination number of 9525


9) Also went to device > phone  and selected the Owner User ID of SB Ph1


10) Cisco Unified Mobile Voice Access Service is running on both Sub and
Pub on CUCM



Questions :


1) I now dial from the pstn line 9525 on the pstn phone to 3033300 .
The prompt I get asks me for a pin .
I enter 1 and the call drops . I Even tried entering 12345 ( which the pin
for user SB Phone 1) and still the call drops after the prompt.
Anything wrong the above config? Anything missing in the config ? Any
suggestions?


2) I am strip the number to last 4 digits ( as in step 3) . Is this correct
procedure?


3) There is also no QOS setup in the config for now . Anything related to
Bandwidth here?




Please help!


-MJ
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Mobile Voice Access and H323 Gateway

[Michael.Sears]

An H323 gateway is required to enable Mobile Voice Access service.  The H323 
gateway is where you setup the service mva.

Configure on H3233 Gateway:
Application
Service mva http://:8080/ccmivr/pages/IVRMainpage.vxml

In CUCM go to help.  Then search for mobile voice and look for Configuring an 
H.323 Gateway for System Remote Access by Using PRI.

Michael Sears
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com
Sent: Saturday, June 30, 2012 10:00 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 76, Issue 68

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific than "Re: 
Contents of CCIE_Voice digest..."


Today's Topics:

   1. Mobile Voice Access (Felton (Feng) Xu)


--

Message: 1
Date: Sat, 30 Jun 2012 05:06:09 -0700 (PDT)
From: "Felton \(Feng\) Xu" 
To: "ccie_voice@onlinestudylist.com" 
Subject: [OSL | CCIE_Voice] Mobile Voice Access
Message-ID:
<1341057969.38483.yahoomail...@web113809.mail.gq1.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

Hi,

I am doing the mobile voice access lab, I found most of the configuration guide 
will include the H.323 gateway to play the IVR according to the VXML file. For 
my current lab, I only have the CUCM over VMware, and an Asterisk server acting 
as PSTN/PLMN via SIP trunk to CUCM. Is that possible to have mobile voice 
access working in my environment, is H.323 GW is a must for this scenario?

Scenarios:
1. mobile number (#6140918 from Asterisk) called to MVA number (#6999) 2. 
CUCM replied with 404 Not Found.
3. The CUCM log file indicate the following:

06/30/2012 21:41:24.504 CCM|DbMobility: getMatchedRemDest starts: cnumber = 
+6140918|
06/30/2012 21:41:24.504 CCM|DbMobility: getMatchedRemDest: partial 
match|
06/30/2012 21:41:24.504 CCM|DbMobility: removeLeadingPlus: Calling Party Number 
starts with a leading +, +6140918 , removing it ... 
|
06/30/2012 21:41:24.504 CCM|DbMobility: getMatchedRemDest: number to partial 
match is 
6140918|
06/30/2012 21:41:24.504 CCM|DbMobility: getMatchedRemDest: need to match 8 
digits|
06/30/2012 21:41:24.504 CCM|DbMobility: getMatchedRemDest can't find remdest 
+6140918 in 
map|


Regards,?
---
Feng Xu (Felton)
felto...@yahoo.com
-- next part --
An HTML attachment was scrubbed...
URL: 

--

___
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice


End of CCIE_Voice Digest, Vol 76, Issue 68
**




___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Mobile Voice Access

[Felton (Feng) Xu]

Hi,

I am doing the mobile voice access lab, I found most of the configuration guide 
will include the H.323 gateway to play the IVR according to the VXML file. For 
my current lab, I only have the CUCM over VMware, and an Asterisk server acting 
as PSTN/PLMN via SIP trunk to CUCM. Is that possible to have mobile voice 
access working in my environment, is H.323 GW is a must for this scenario?

Scenarios:
1. mobile number (#6140918 from Asterisk) called to MVA number (#6999)
2. CUCM replied with 404 Not Found.
3. The CUCM log file indicate the following:

06/30/2012 21:41:24.504 CCM|DbMobility: getMatchedRemDest starts: cnumber = 
+6140918|
06/30/2012 21:41:24.504 CCM|DbMobility: getMatchedRemDest: partial 
match|
06/30/2012 21:41:24.504 CCM|DbMobility: removeLeadingPlus: Calling Party Number 
starts with a leading +, +6140918 , removing it ... 
|
06/30/2012 21:41:24.504 CCM|DbMobility: getMatchedRemDest: number to partial 
match is 
6140918|
06/30/2012 21:41:24.504 CCM|DbMobility: getMatchedRemDest: need to match 8 
digits|
06/30/2012 21:41:24.504 CCM|DbMobility: getMatchedRemDest can't find remdest 
+6140918 in 
map|


Regards, 
---
Feng Xu (Felton)
felto...@yahoo.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Juan Lopez]

very good to know ! thx for the tip Vik, I was unaware of this. So the
workaround is: set RD = ANI and eventually use application dial rules to
map the RD to the route plan used.

2012/3/7 Vik Malhi 

> Welcome Mathew.
>
> Juan- sporadic in all 7.x. Sometimes works, sometimes doesn't. My advice-
> don't go anywhere near partial matching for the lifetime of your CCIE-V Lab
> prep.
>
>  Vik Malhi – CCIE #13890
> Managing Partner - IPexpert, Inc.
>
> Telephone: +1.810.326.1444 ext 420
> Fax: +1.810.454.0130
> Mailto: vma...@ipexpert.com
>
>
>
>
>   On Mar 6, 2012, at 9:26 PM, Juan Lopez wrote:
>
>  is this a general issue? I did not have this kind of problem: RP set to
> +e164 and partial match did not give any problems in my case...
> Used UCM version is 7.0.1.11000-2
> thx!
> Juan
>
> 2012/3/6 Mathew Miller 
>
>> Thanks much Vik!
>>
>> I have confirmed that if I have a 10 digit RD and get 7 digit ANI and
>> set to Partial Match that every time I experience this behavior with
>> the annunciator. When I changed it to full match with a 7 digit RD it
>> fixed my problem.
>>
>>
>>
>>
>>
>> On Tue, Mar 6, 2012 at 11:08 AM, Vik Malhi  wrote:
>> > I'm guessing you are using "partial matching" of the ANI versus the RD.
>> >
>> > Make it a complete match- in other words whatever the ANI is (from the
>> PSTN
>> > in the Q931 debug) make this the RD number.
>> >
>> > Vik Malhi – CCIE #13890
>> > Managing Partner - IPexpert, Inc.
>> >
>> > Telephone: +1.810.326.1444 ext 420
>> > Fax: +1.810.454.0130
>> > Mailto: vma...@ipexpert.com
>> >
>> >
>> >
>> >
>> > On Mar 6, 2012, at 8:29 AM, Mathew Miller wrote:
>> >
>> > Hello All,
>> >
>> > I have setup mobile voice access for use to be able to dial extensions
>> using
>> > enterprise access in my home lab. 100 times out of 100 it works just
>> peachy…
>> >
>> > I setup my dial-peer on my router, I setup the IVR service on the
>> router, I
>> > setup my RDP and RD, along with my Mobile Voice Access number and set my
>> > Service Parameters.
>> >
>> > In my lunch dates I set this up exactly like I have done 100 times at
>> home
>> > and everything seems to work fine until I try to dial the the extension
>> I
>> > want to call and I get the Annunciator telling me my call can't be
>> completed
>> > as dialed.
>> >
>> > I have checked my re-routing CSS and all the steps in setup and have
>> access
>> > to internal extensions so I don't know what I am doing wrong. I have
>> tried
>> > to create the issue in my home lab and cant seem to do it. It work EVERY
>> > time in my home lab.
>> >
>> > Can anyone think of something I may be overlooking?
>> >
>> >
>> >
>> >
>> > ___
>> > For more information regarding industry leading CCIE Lab training,
>> please
>> > visit www.ipexpert.com
>> >
>> > Are you a CCNP or CCIE and looking for a job? Check out
>> > www.PlatinumPlacement.com 
>> >
>> >
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com 
>>
>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Vik Malhi]

Welcome Mathew.

Juan- sporadic in all 7.x. Sometimes works, sometimes doesn't. My advice- don't 
go anywhere near partial matching for the lifetime of your CCIE-V Lab prep.

Vik Malhi – CCIE #13890 
Managing Partner - IPexpert, Inc.

Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130 
Mailto: vma...@ipexpert.com




On Mar 6, 2012, at 9:26 PM, Juan Lopez wrote:

> is this a general issue? I did not have this kind of problem: RP set to +e164 
> and partial match did not give any problems in my case...
> Used UCM version is 7.0.1.11000-2
> thx!
> Juan
> 
> 2012/3/6 Mathew Miller 
> Thanks much Vik!
> 
> I have confirmed that if I have a 10 digit RD and get 7 digit ANI and
> set to Partial Match that every time I experience this behavior with
> the annunciator. When I changed it to full match with a 7 digit RD it
> fixed my problem.
> 
> 
> 
> 
> 
> On Tue, Mar 6, 2012 at 11:08 AM, Vik Malhi  wrote:
> > I'm guessing you are using "partial matching" of the ANI versus the RD.
> >
> > Make it a complete match- in other words whatever the ANI is (from the PSTN
> > in the Q931 debug) make this the RD number.
> >
> > Vik Malhi – CCIE #13890
> > Managing Partner - IPexpert, Inc.
> >
> > Telephone: +1.810.326.1444 ext 420
> > Fax: +1.810.454.0130
> > Mailto: vma...@ipexpert.com
> >
> >
> >
> >
> > On Mar 6, 2012, at 8:29 AM, Mathew Miller wrote:
> >
> > Hello All,
> >
> > I have setup mobile voice access for use to be able to dial extensions using
> > enterprise access in my home lab. 100 times out of 100 it works just peachy…
> >
> > I setup my dial-peer on my router, I setup the IVR service on the router, I
> > setup my RDP and RD, along with my Mobile Voice Access number and set my
> > Service Parameters.
> >
> > In my lunch dates I set this up exactly like I have done 100 times at home
> > and everything seems to work fine until I try to dial the the extension I
> > want to call and I get the Annunciator telling me my call can't be completed
> > as dialed.
> >
> > I have checked my re-routing CSS and all the steps in setup and have access
> > to internal extensions so I don't know what I am doing wrong. I have tried
> > to create the issue in my home lab and cant seem to do it. It work EVERY
> > time in my home lab.
> >
> > Can anyone think of something I may be overlooking?
> >
> >
> >
> >
> > ___
> > For more information regarding industry leading CCIE Lab training, please
> > visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> > www.PlatinumPlacement.com
> >
> >
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
> 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Juan Lopez]

is this a general issue? I did not have this kind of problem: RP set to
+e164 and partial match did not give any problems in my case...
Used UCM version is 7.0.1.11000-2
thx!
Juan

2012/3/6 Mathew Miller 

> Thanks much Vik!
>
> I have confirmed that if I have a 10 digit RD and get 7 digit ANI and
> set to Partial Match that every time I experience this behavior with
> the annunciator. When I changed it to full match with a 7 digit RD it
> fixed my problem.
>
>
>
>
>
> On Tue, Mar 6, 2012 at 11:08 AM, Vik Malhi  wrote:
> > I'm guessing you are using "partial matching" of the ANI versus the RD.
> >
> > Make it a complete match- in other words whatever the ANI is (from the
> PSTN
> > in the Q931 debug) make this the RD number.
> >
> > Vik Malhi – CCIE #13890
> > Managing Partner - IPexpert, Inc.
> >
> > Telephone: +1.810.326.1444 ext 420
> > Fax: +1.810.454.0130
> > Mailto: vma...@ipexpert.com
> >
> >
> >
> >
> > On Mar 6, 2012, at 8:29 AM, Mathew Miller wrote:
> >
> > Hello All,
> >
> > I have setup mobile voice access for use to be able to dial extensions
> using
> > enterprise access in my home lab. 100 times out of 100 it works just
> peachy…
> >
> > I setup my dial-peer on my router, I setup the IVR service on the
> router, I
> > setup my RDP and RD, along with my Mobile Voice Access number and set my
> > Service Parameters.
> >
> > In my lunch dates I set this up exactly like I have done 100 times at
> home
> > and everything seems to work fine until I try to dial the the extension I
> > want to call and I get the Annunciator telling me my call can't be
> completed
> > as dialed.
> >
> > I have checked my re-routing CSS and all the steps in setup and have
> access
> > to internal extensions so I don't know what I am doing wrong. I have
> tried
> > to create the issue in my home lab and cant seem to do it. It work EVERY
> > time in my home lab.
> >
> > Can anyone think of something I may be overlooking?
> >
> >
> >
> >
> > ___
> > For more information regarding industry leading CCIE Lab training, please
> > visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> > www.PlatinumPlacement.com 
> >
> >
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com 
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Mathew Miller]

Thanks much Vik!

I have confirmed that if I have a 10 digit RD and get 7 digit ANI and
set to Partial Match that every time I experience this behavior with
the annunciator. When I changed it to full match with a 7 digit RD it
fixed my problem.





On Tue, Mar 6, 2012 at 11:08 AM, Vik Malhi  wrote:
> I'm guessing you are using "partial matching" of the ANI versus the RD.
>
> Make it a complete match- in other words whatever the ANI is (from the PSTN
> in the Q931 debug) make this the RD number.
>
> Vik Malhi – CCIE #13890
> Managing Partner - IPexpert, Inc.
>
> Telephone: +1.810.326.1444 ext 420
> Fax: +1.810.454.0130
> Mailto: vma...@ipexpert.com
>
>
>
>
> On Mar 6, 2012, at 8:29 AM, Mathew Miller wrote:
>
> Hello All,
>
> I have setup mobile voice access for use to be able to dial extensions using
> enterprise access in my home lab. 100 times out of 100 it works just peachy…
>
> I setup my dial-peer on my router, I setup the IVR service on the router, I
> setup my RDP and RD, along with my Mobile Voice Access number and set my
> Service Parameters.
>
> In my lunch dates I set this up exactly like I have done 100 times at home
> and everything seems to work fine until I try to dial the the extension I
> want to call and I get the Annunciator telling me my call can't be completed
> as dialed.
>
> I have checked my re-routing CSS and all the steps in setup and have access
> to internal extensions so I don't know what I am doing wrong. I have tried
> to create the issue in my home lab and cant seem to do it. It work EVERY
> time in my home lab.
>
> Can anyone think of something I may be overlooking?
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Eliot Ngwa]

Aw man... I've been pulling my hair out (the little bits I have left) over
this for the past 2 days. This solved it. Thank you!

On Tue, Mar 6, 2012 at 12:32 PM, Joe Martini  wrote:

> I ran into this when using 7.0.2 for studying and found the bug ID for it:
> http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsy60115.
>  As Vik said complete matching is an easy workaround.
>
> Joe
>
>
>
> On Mar 6, 2012, at 12:10 PM, Vik Malhi wrote:
>
> And I forgot to mention don't use partial matching (at least in
> 7.x)...always leave it as "complete match"...
>
>
> Vik Malhi – CCIE #13890
> Managing Partner - IPexpert, Inc.
>
> Telephone: +1.810.326.1444 ext 420
> Fax: +1.810.454.0130
> Mailto: vma...@ipexpert.com
>
>
>
>
> On Mar 6, 2012, at 8:29 AM, Mathew Miller wrote:
>
> Hello All,
>
> I have setup mobile voice access for use to be able to dial extensions
> using enterprise access in my home lab. 100 times out of 100 it works just
> peachy…
>
> I setup my dial-peer on my router, I setup the IVR service on the router,
> I setup my RDP and RD, along with my Mobile Voice Access number and set my
> Service Parameters.
>
> In my lunch dates I set this up exactly like I have done 100 times at home
> and everything seems to work fine until I try to dial the the extension I
> want to call and I get the Annunciator telling me my call can't be
> completed as dialed.
>
> I have checked my re-routing CSS and all the steps in setup and have
> access to internal extensions so I don't know what I am doing wrong. I have
> tried to create the issue in my home lab and cant seem to do it. It work
> EVERY time in my home lab.
>
> Can anyone think of something I may be overlooking?
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Joe Martini]

I ran into this when using 7.0.2 for studying and found the bug ID for it: 
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsy60115.
  As Vik said complete matching is an easy workaround.

Joe


On Mar 6, 2012, at 12:10 PM, Vik Malhi wrote:

And I forgot to mention don't use partial matching (at least in 7.x)...always 
leave it as "complete match"...


Vik Malhi – CCIE #13890 
Managing Partner - IPexpert, Inc.

Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130 
Mailto: vma...@ipexpert.com




On Mar 6, 2012, at 8:29 AM, Mathew Miller wrote:

> Hello All,
> 
> I have setup mobile voice access for use to be able to dial extensions using 
> enterprise access in my home lab. 100 times out of 100 it works just peachy…
> 
> I setup my dial-peer on my router, I setup the IVR service on the router, I 
> setup my RDP and RD, along with my Mobile Voice Access number and set my 
> Service Parameters. 
> 
> In my lunch dates I set this up exactly like I have done 100 times at home 
> and everything seems to work fine until I try to dial the the extension I 
> want to call and I get the Annunciator telling me my call can't be completed 
> as dialed. 
> 
> I have checked my re-routing CSS and all the steps in setup and have access 
> to internal extensions so I don't know what I am doing wrong. I have tried to 
> create the issue in my home lab and cant seem to do it. It work EVERY time in 
> my home lab.
> 
> Can anyone think of something I may be overlooking?
> 
> 
> 
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Mathew Miller]

Yes I was using Partial. In my home lab I have it setup as 10 digit ANI so I
guess I did leave it at full match instead.

I will give it a try and see if I can recreate the issue. Thanks

From:  Vik Malhi 
Date:  Tue, 6 Mar 2012 09:10:14 -0800
To:  Mathew Miller 
Cc:  
Subject:  Re: [OSL | CCIE_Voice] Mobile Voice Access

And I forgot to mention don't use partial matching (at least in
7.x)...always leave it as "complete match"...


Vik Malhi ­ CCIE #13890
Managing Partner - IPexpert, Inc.

Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com




On Mar 6, 2012, at 8:29 AM, Mathew Miller wrote:

> Hello All,
> 
> I have setup mobile voice access for use to be able to dial extensions using
> enterprise access in my home lab. 100 times out of 100 it works just peachyŠ
> 
> I setup my dial-peer on my router, I setup the IVR service on the router, I
> setup my RDP and RD, along with my Mobile Voice Access number and set my
> Service Parameters.
> 
> In my lunch dates I set this up exactly like I have done 100 times at home and
> everything seems to work fine until I try to dial the the extension I want to
> call and I get the Annunciator telling me my call can't be completed as
> dialed. 
> 
> I have checked my re-routing CSS and all the steps in setup and have access to
> internal extensions so I don't know what I am doing wrong. I have tried to
> create the issue in my home lab and cant seem to do it. It work EVERY time in
> my home lab.
> 
> Can anyone think of something I may be overlooking?
> 
> 
> 
> 
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com <http://www.ipexpert.com>
> 
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com <http://www.PlatinumPlacement.com>



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Vik Malhi]

And I forgot to mention don't use partial matching (at least in 7.x)...always 
leave it as "complete match"...


Vik Malhi – CCIE #13890 
Managing Partner - IPexpert, Inc.

Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130 
Mailto: vma...@ipexpert.com




On Mar 6, 2012, at 8:29 AM, Mathew Miller wrote:

> Hello All,
> 
> I have setup mobile voice access for use to be able to dial extensions using 
> enterprise access in my home lab. 100 times out of 100 it works just peachy…
> 
> I setup my dial-peer on my router, I setup the IVR service on the router, I 
> setup my RDP and RD, along with my Mobile Voice Access number and set my 
> Service Parameters. 
> 
> In my lunch dates I set this up exactly like I have done 100 times at home 
> and everything seems to work fine until I try to dial the the extension I 
> want to call and I get the Annunciator telling me my call can't be completed 
> as dialed. 
> 
> I have checked my re-routing CSS and all the steps in setup and have access 
> to internal extensions so I don't know what I am doing wrong. I have tried to 
> create the issue in my home lab and cant seem to do it. It work EVERY time in 
> my home lab.
> 
> Can anyone think of something I may be overlooking?
> 
> 
> 
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Vik Malhi]

I'm guessing you are using "partial matching" of the ANI versus the RD. 

Make it a complete match- in other words whatever the ANI is (from the PSTN in 
the Q931 debug) make this the RD number.

Vik Malhi – CCIE #13890 
Managing Partner - IPexpert, Inc.

Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130 
Mailto: vma...@ipexpert.com




On Mar 6, 2012, at 8:29 AM, Mathew Miller wrote:

> Hello All,
> 
> I have setup mobile voice access for use to be able to dial extensions using 
> enterprise access in my home lab. 100 times out of 100 it works just peachy…
> 
> I setup my dial-peer on my router, I setup the IVR service on the router, I 
> setup my RDP and RD, along with my Mobile Voice Access number and set my 
> Service Parameters. 
> 
> In my lunch dates I set this up exactly like I have done 100 times at home 
> and everything seems to work fine until I try to dial the the extension I 
> want to call and I get the Annunciator telling me my call can't be completed 
> as dialed. 
> 
> I have checked my re-routing CSS and all the steps in setup and have access 
> to internal extensions so I don't know what I am doing wrong. I have tried to 
> create the issue in my home lab and cant seem to do it. It work EVERY time in 
> my home lab.
> 
> Can anyone think of something I may be overlooking?
> 
> 
> 
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Mobile Voice Access

[Mathew Miller]

Hello All,

I have setup mobile voice access for use to be able to dial extensions using
enterprise access in my home lab. 100 times out of 100 it works just peachyŠ

I setup my dial-peer on my router, I setup the IVR service on the router, I
setup my RDP and RD, along with my Mobile Voice Access number and set my
Service Parameters.

In my lunch dates I set this up exactly like I have done 100 times at home
and everything seems to work fine until I try to dial the the extension I
want to call and I get the Annunciator telling me my call can't be completed
as dialed. 

I have checked my re-routing CSS and all the steps in setup and have access
to internal extensions so I don't know what I am doing wrong. I have tried
to create the issue in my home lab and cant seem to do it. It work EVERY
time in my home lab.

Can anyone think of something I may be overlooking?






___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Roger Carpio]

Hello,

Did you add this gateway as H323 in CUCM as well? Features and Services
guide does not seem to mention MGCP for this feature.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fsmobmgr.html#wp1206437

Were you specifically asked to have MVA and MGCP without H323?

Regards,
Roger Carpio.

On Sun, Jan 2, 2011 at 2:13 AM, Shrini  wrote:

>  Hi Experts,
>
> *"Wish you all a Happy and Prosperous New Year 2011"*
>
> First question this year :-)
>
> HQ Site is MGCP.
>
> When I call HQ Phone 5002 , HQ PSTN is ringing  -- > all is good.
>
> I have configured MVA number 5999 in service parameters and
> Media Resources --> MVA --> 5999 / PT-INTERNAL / English
>
> on router.
>
> application
>   service cmm http://177.1.10.10:8080/ccmivr/pages/IVRMainpage.vxml
>   !
> !
> dial-peer voice 5999 pots
>  service cmm
>  incoming called-number 2123945999
>  no digit-strip
>
> Also on CUCM :
>
>
> But when I call 2123945999 from HQ PSTN 2123942123 I am getting fast busy
> tone. It is not invoking the vxml script.
>
>
> What am I doing wrong here ?
>
> TIA
> Shrini
>
>
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[ShinGei Yong]

Hi Shrini,

What about your UCM configuration?
1.> is your H323 GW registered with UCM?
2.> what is your dialing behavior internally?4 or 10?if is 4,
then your in & outbound dp should be 4 digit patten as well
instead of 10.

Please provide more info

Shingei

On Sun, Jan 2, 2011 at 4:13 PM, Shrini  wrote:

>  Hi Experts,
>
> *"Wish you all a Happy and Prosperous New Year 2011"*
>
> First question this year :-)
>
> HQ Site is MGCP.
>
> When I call HQ Phone 5002 , HQ PSTN is ringing  -- > all is good.
>
> I have configured MVA number 5999 in service parameters and
> Media Resources --> MVA --> 5999 / PT-INTERNAL / English
>
> on router.
>
> application
>   service cmm http://177.1.10.10:8080/ccmivr/pages/IVRMainpage.vxml
>   !
> !
> dial-peer voice 5999 pots
>  service cmm
>  incoming called-number 2123945999
>  no digit-strip
>
> Also on CUCM :
>
>
> But when I call 2123945999 from HQ PSTN 2123942123 I am getting fast busy
> tone. It is not invoking the vxml script.
>
>
> What am I doing wrong here ?
>
> TIA
> Shrini
>
>
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Roger Carpio]

Hello ShinGei,

Thanks for the info. In the end, MGCP will not make it for us [?]

Regards,
Roger Carpio.

On Sun, Jan 2, 2011 at 9:34 AM, ShinGei Yong  wrote:

> Hi Roger,
>
> MVA on a MGCP control gateway is possible.In fact,that is a coexisting of
> both
> MGCP and H323 on the same gateway,but you could not used a MGCP
> control PRI for MVA.
>
> you may refer to Netpro for own interest.
> https://supportforums.cisco.com/thread/2005673
>
> Shingei.
>
> On Sun, Jan 2, 2011 at 11:16 PM, Shrini  wrote:
>
>>  Hi ShinGei , bkvalentine, Rogers et al
>>
>> I remember it was successful last time when I configured it another lab
>> when HQ was h323.
>>
>> Now I was confused around dial-peers hence had the question.
>>
>> I will give a try now with MGCP + H323 on HQ and it should work.
>>
>> Thanks all.
>> Shrini
>>
>>  *From:* ShinGei Yong [mailto:shingei.y...@gmail.com]
>> *Sent:* Sunday, January 02, 2011 6:42 AM
>> *To:* Shrini; ccie_voice@onlinestudylist.com
>> *Subject:* Re: [OSL | CCIE_Voice] Mobile Voice Access
>>
>> Hi Shrini,
>>
>> What about your UCM configuration?
>> 1.> is your H323 GW registered with UCM?
>> 2.> what is your dialing behavior internally?4 or 10?if is 4,
>> then your in & outbound dp should be 4 digit patten as well
>> instead of 10.
>>
>> Please provide more info
>>
>> Shingei
>>
>> On Sun, Jan 2, 2011 at 4:13 PM, Shrini  wrote:
>>
>>>  Hi Experts,
>>>
>>> *"Wish you all a Happy and Prosperous New Year 2011"*
>>>
>>> First question this year :-)
>>>
>>> HQ Site is MGCP.
>>>
>>> When I call HQ Phone 5002 , HQ PSTN is ringing  -- > all is good.
>>>
>>> I have configured MVA number 5999 in service parameters and
>>> Media Resources --> MVA --> 5999 / PT-INTERNAL / English
>>>
>>> on router.
>>>
>>> application
>>>   service cmm http://177.1.10.10:8080/ccmivr/pages/IVRMainpage.vxml
>>>   !
>>> !
>>> dial-peer voice 5999 pots
>>>  service cmm
>>>  incoming called-number 2123945999
>>>  no digit-strip
>>>
>>> Also on CUCM :
>>>
>>>
>>> But when I call 2123945999 from HQ PSTN 2123942123 I am getting fast busy
>>> tone. It is not invoking the vxml script.
>>>
>>>
>>> What am I doing wrong here ?
>>>
>>> TIA
>>> Shrini
>>>
>>>
>>>
>>>
>>>
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>>
>>
>
<<330.gif>>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Mobile Voice Access

[Shrini]

Hi Experts,
 
"Wish you all a Happy and Prosperous New Year 2011"
 
First question this year :-)
 
HQ Site is MGCP.
 
When I call HQ Phone 5002 , HQ PSTN is ringing  -- > all is good.
 
I have configured MVA number 5999 in service parameters and 
Media Resources --> MVA --> 5999 / PT-INTERNAL / English
 
on router.
 
application
  service cmm http://177.1.10.10:8080/ccmivr/pages/IVRMainpage.vxml
  !
!
dial-peer voice 5999 pots
 service cmm
 incoming called-number 2123945999
 no digit-strip
 
Also on CUCM :
 
 
But when I call 2123945999 from HQ PSTN 2123942123 I am getting fast busy
tone. It is not invoking the vxml script.
 
 
What am I doing wrong here ?
 
TIA
Shrini
 
 
 
 
 
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Shrini]

Hi ShinGei , bkvalentine, Rogers et al
 
I remember it was successful last time when I configured it another lab when
HQ was h323.
 
Now I was confused around dial-peers hence had the question. 
 
I will give a try now with MGCP + H323 on HQ and it should work.
 
Thanks all.
Shrini
 
 From: ShinGei Yong [mailto:shingei.y...@gmail.com] 
Sent: Sunday, January 02, 2011 6:42 AM
To: Shrini; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Mobile Voice Access


Hi Shrini,

What about your UCM configuration?
1.> is your H323 GW registered with UCM?
2.> what is your dialing behavior internally?4 or 10?if is 4,
then your in & outbound dp should be 4 digit patten as well 
instead of 10.

Please provide more info

Shingei


On Sun, Jan 2, 2011 at 4:13 PM, Shrini  wrote:


Hi Experts,
 
"Wish you all a Happy and Prosperous New Year 2011"
 
First question this year :-)
 
HQ Site is MGCP.
 
When I call HQ Phone 5002 , HQ PSTN is ringing  -- > all is good.
 
I have configured MVA number 5999 in service parameters and 

Media Resources --> MVA --> 5999 / PT-INTERNAL / English
 
on router.
 
application
  service cmm http://177.1.10.10:8080/ccmivr/pages/IVRMainpage.vxml
  !
!
dial-peer voice 5999 pots
 service cmm
 incoming called-number 2123945999
 no digit-strip
 
Also on CUCM :
 
 
But when I call 2123945999 from HQ PSTN 2123942123 I am getting fast busy
tone. It is not invoking the vxml script.
 
 
What am I doing wrong here ?
 
TIA
Shrini
 
 
 
 
 

___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com




___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Shrini]

Hi Jeff,
 
Thanks for your valuable suggestion.
 
It worked.
 
-S

  _  

From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
givemeccievoice2...@gmail.com
Sent: Sunday, January 02, 2011 2:50 PM
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Mobile Voice Access



Hi Shrini,

 

If you follow the Features and Services Guide as mentioned before, you will
have success.  You need to configure "hairpinning" for MGCP to work with
MVA.  

 

The idea is that you will accept the call using 5999, but the MVA pilot
number will be a different number.  You will have to add the h323 gateway to
CUCM and create a route pattern that will direct calls for 5999 to the h323
gateway.  The incoming dialpeer on the gateway will be the 5999 number which
will trigger the VXML script.  There will be a different number needed for
the MVA pilot, for example 6000.  The outgoing dial-peer will point back to
CUCM using this number (6000).  As the h323 gateway and the MGCP gateway
will be logically separate (listening to different interfaces), you can
accomplish this on the same box.

 

Hope this helps,

Jeff

From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Carpio
Sent: Sunday, January 02, 2011 7:40 AM
To: ShinGei Yong
Cc: ccie_voice@onlinestudylist.com; Shrini
Subject: Re: [OSL | CCIE_Voice] Mobile Voice Access

 

Hello ShinGei,

Thanks for the info. In the end, MGCP will not make it for us 

Regards,
Roger Carpio.

On Sun, Jan 2, 2011 at 9:34 AM, ShinGei Yong  wrote:

Hi Roger,

MVA on a MGCP control gateway is possible.In fact,that is a coexisting of
both 
MGCP and H323 on the same gateway,but you could not used a MGCP 
control PRI for MVA. 

you may refer to Netpro for own interest.
https://supportforums.cisco.com/thread/2005673

Shingei.

On Sun, Jan 2, 2011 at 11:16 PM, Shrini  wrote:

Hi ShinGei , bkvalentine, Rogers et al

 

I remember it was successful last time when I configured it another lab when
HQ was h323.

 

Now I was confused around dial-peers hence had the question. 

 

I will give a try now with MGCP + H323 on HQ and it should work.

 

Thanks all.

Shrini

 

 From: ShinGei Yong [mailto:shingei.y...@gmail.com] 
Sent: Sunday, January 02, 2011 6:42 AM
To: Shrini; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Mobile Voice Access

Hi Shrini,

What about your UCM configuration?
1.> is your H323 GW registered with UCM?
2.> what is your dialing behavior internally?4 or 10?if is 4,
then your in & outbound dp should be 4 digit patten as well 
instead of 10.

Please provide more info

Shingei

On Sun, Jan 2, 2011 at 4:13 PM, Shrini  wrote:

Hi Experts,

 

"Wish you all a Happy and Prosperous New Year 2011"

 

First question this year :-)

 

HQ Site is MGCP.

 

When I call HQ Phone 5002 , HQ PSTN is ringing  -- > all is good.

 

I have configured MVA number 5999 in service parameters and 

Media Resources --> MVA --> 5999 / PT-INTERNAL / English

 

on router.

 

application
  service cmm http://177.1.10.10:8080/ccmivr/pages/IVRMainpage.vxml
  !
!

dial-peer voice 5999 pots
 service cmm
 incoming called-number 2123945999
 no digit-strip

 

Also on CUCM :

 

 

But when I call 2123945999 from HQ PSTN 2123942123 I am getting fast busy
tone. It is not invoking the vxml script.

 

 

What am I doing wrong here ?

 

TIA
Shrini

 

 

 

 

 


___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com

 

 

 

<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[givemeccievoice2010]

Hi Shrini,

 

If you follow the Features and Services Guide as mentioned before, you will
have success.  You need to configure "hairpinning" for MGCP to work with
MVA.  

 

The idea is that you will accept the call using 5999, but the MVA pilot
number will be a different number.  You will have to add the h323 gateway to
CUCM and create a route pattern that will direct calls for 5999 to the h323
gateway.  The incoming dialpeer on the gateway will be the 5999 number which
will trigger the VXML script.  There will be a different number needed for
the MVA pilot, for example 6000.  The outgoing dial-peer will point back to
CUCM using this number (6000).  As the h323 gateway and the MGCP gateway
will be logically separate (listening to different interfaces), you can
accomplish this on the same box.

 

Hope this helps,

Jeff

From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Carpio
Sent: Sunday, January 02, 2011 7:40 AM
To: ShinGei Yong
Cc: ccie_voice@onlinestudylist.com; Shrini
Subject: Re: [OSL | CCIE_Voice] Mobile Voice Access

 

Hello ShinGei,

Thanks for the info. In the end, MGCP will not make it for us 

Regards,
Roger Carpio.

On Sun, Jan 2, 2011 at 9:34 AM, ShinGei Yong  wrote:

Hi Roger,

MVA on a MGCP control gateway is possible.In fact,that is a coexisting of
both 
MGCP and H323 on the same gateway,but you could not used a MGCP 
control PRI for MVA. 

you may refer to Netpro for own interest.
https://supportforums.cisco.com/thread/2005673

Shingei.

On Sun, Jan 2, 2011 at 11:16 PM, Shrini  wrote:

Hi ShinGei , bkvalentine, Rogers et al

 

I remember it was successful last time when I configured it another lab when
HQ was h323.

 

Now I was confused around dial-peers hence had the question. 

 

I will give a try now with MGCP + H323 on HQ and it should work.

 

Thanks all.

Shrini

 

 From: ShinGei Yong [mailto:shingei.y...@gmail.com] 
Sent: Sunday, January 02, 2011 6:42 AM
To: Shrini; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Mobile Voice Access

Hi Shrini,

What about your UCM configuration?
1.> is your H323 GW registered with UCM?
2.> what is your dialing behavior internally?4 or 10?if is 4,
then your in & outbound dp should be 4 digit patten as well 
instead of 10.

Please provide more info

Shingei

On Sun, Jan 2, 2011 at 4:13 PM, Shrini  wrote:

Hi Experts,

 

"Wish you all a Happy and Prosperous New Year 2011"

 

First question this year :-)

 

HQ Site is MGCP.

 

When I call HQ Phone 5002 , HQ PSTN is ringing  -- > all is good.

 

I have configured MVA number 5999 in service parameters and 

Media Resources --> MVA --> 5999 / PT-INTERNAL / English

 

on router.

 

application
  service cmm http://177.1.10.10:8080/ccmivr/pages/IVRMainpage.vxml
  !
!

dial-peer voice 5999 pots
 service cmm
 incoming called-number 2123945999
 no digit-strip

 

Also on CUCM :

 

 

But when I call 2123945999 from HQ PSTN 2123942123 I am getting fast busy
tone. It is not invoking the vxml script.

 

 

What am I doing wrong here ?

 

TIA
Shrini

 

 

 

 

 


___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com

 

 

 

<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[ShinGei Yong]

Hi Roger,

MVA on a MGCP control gateway is possible.In fact,that is a coexisting of
both
MGCP and H323 on the same gateway,but you could not used a MGCP
control PRI for MVA.

you may refer to Netpro for own interest.
https://supportforums.cisco.com/thread/2005673

Shingei.

On Sun, Jan 2, 2011 at 11:16 PM, Shrini  wrote:

>  Hi ShinGei , bkvalentine, Rogers et al
>
> I remember it was successful last time when I configured it another lab
> when HQ was h323.
>
> Now I was confused around dial-peers hence had the question.
>
> I will give a try now with MGCP + H323 on HQ and it should work.
>
> Thanks all.
> Shrini
>
>  *From:* ShinGei Yong [mailto:shingei.y...@gmail.com]
> *Sent:* Sunday, January 02, 2011 6:42 AM
> *To:* Shrini; ccie_voice@onlinestudylist.com
> *Subject:* Re: [OSL | CCIE_Voice] Mobile Voice Access
>
> Hi Shrini,
>
> What about your UCM configuration?
> 1.> is your H323 GW registered with UCM?
> 2.> what is your dialing behavior internally?4 or 10?if is 4,
> then your in & outbound dp should be 4 digit patten as well
> instead of 10.
>
> Please provide more info
>
> Shingei
>
> On Sun, Jan 2, 2011 at 4:13 PM, Shrini  wrote:
>
>>  Hi Experts,
>>
>> *"Wish you all a Happy and Prosperous New Year 2011"*
>>
>> First question this year :-)
>>
>> HQ Site is MGCP.
>>
>> When I call HQ Phone 5002 , HQ PSTN is ringing  -- > all is good.
>>
>> I have configured MVA number 5999 in service parameters and
>> Media Resources --> MVA --> 5999 / PT-INTERNAL / English
>>
>> on router.
>>
>> application
>>   service cmm http://177.1.10.10:8080/ccmivr/pages/IVRMainpage.vxml
>>   !
>> !
>> dial-peer voice 5999 pots
>>  service cmm
>>  incoming called-number 2123945999
>>  no digit-strip
>>
>> Also on CUCM :
>>
>>
>> But when I call 2123945999 from HQ PSTN 2123942123 I am getting fast busy
>> tone. It is not invoking the vxml script.
>>
>>
>> What am I doing wrong here ?
>>
>> TIA
>> Shrini
>>
>>
>>
>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Daniel Berlinski]

Hi Warren

Check if the CSS applied to the remote destination profile can see the
number you are attempting to dial out when using mobile voice access.



On Tue, Jul 20, 2010 at 1:12 PM, Warren Heaviside (wheavisi) <
wheav...@cisco.com> wrote:

>  Experts,
>
>
>
> I’m configuring MVA and having the following issue:
>
>
>
> PSTN call comes into HQ H.323 G/W from 415-888-4343.  Caller hears the VXML
> script prompt to enter the Remote Destination (4158884343) followed by
> pound, then a prompt for their PIN followed by #.  The next prompt is to
> press 1# to place a call.  After the number is dialed I can see the line
> appearance for HQ Phone x5002 go offhook but hear the Cisco reorder verbiage
> “your call cannot….”.  The number unsuccessfully being dialed via MVA can be
> successfully dialed directly from the same HQ phone x5002. My MVA number
> is 5009 in CUCM.  The POTS and VOIP dial peers are below.  Thanks for
> looking.
>
>
>
> dial-peer voice 5009 pots
>
>  service ccm
>
>  incoming called-number 5009
>
>  no digit-strip
>
>
>
> dial-peer voice 5000 voip
>
>  destination-pattern 5...$
>
>  voice-class codec 1
>
>  session target ipv4:10.10.210.11
>
>  dtmf-relay h245-alphanumeric
>
>  no vad
>
>
>
> application
>
>   service CCM http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
>
>
>
> Warren Heavisidewheav...@cisco.com
>
> ENGINEER.CUSTOMER SUPPORT
>
> Phone: +1 408 853 7995
>
> Office Hour 9 am - 5 pm Pacific Monday - Friday
>
>
>
> For corporate legal information go to:
>
> http://www.cisco.com/web/about/doing_business/legal/cri/index.html
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Mobile Voice Access

[Matthew Berry]

Warren

There should be a service parameter that toggles between using the gateway CSS 
or the device + remote destination profile CSS for call routing decisions.

Yu could try playing with that.


Matthew Berry

**Sent from my iPhone**
Skype/Twitter: ciscovoiceguru
Google Voice: +1 612 424 5044

On Jul 19, 2010, at 20:12, "Warren Heaviside (wheavisi)"  
wrote:

> Experts,
> 
>  
> 
> I’m configuring MVA and having the following issue:
> 
>  
> 
> PSTN call comes into HQ H.323 G/W from 415-888-4343.  Caller hears the VXML 
> script prompt to enter the Remote Destination (4158884343) followed by pound, 
> then a prompt for their PIN followed by #.  The next prompt is to press 1# to 
> place a call.  After the number is dialed I can see the line appearance for 
> HQ Phone x5002 go offhook but hear the Cisco reorder verbiage “your call 
> cannot….”.  The number unsuccessfully being dialed via MVA can be 
> successfully dialed directly from the same HQ phone x5002. My MVA number 
> is 5009 in CUCM.  The POTS and VOIP dial peers are below.  Thanks for looking.
> 
>  
> 
> dial-peer voice 5009 pots
> 
>  service ccm
> 
>  incoming called-number 5009
> 
>  no digit-strip
> 
>  
> 
> dial-peer voice 5000 voip
> 
>  destination-pattern 5...$
> 
>  voice-class codec 1
> 
>  session target ipv4:10.10.210.11
> 
>  dtmf-relay h245-alphanumeric
> 
>  no vad
> 
>  
> 
> application
> 
>   service CCM http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
> 
>  
> 
> Warren Heavisidewheav...@cisco.com
> 
> ENGINEER.CUSTOMER SUPPORT
> 
> Phone: +1 408 853 7995
> 
> Office Hour 9 am - 5 pm Pacific Monday - Friday
> 
>  
> 
> For corporate legal information go to:
> 
> http://www.cisco.com/web/about/doing_business/legal/cri/index.html
> 
>  
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Mobile Voice Access

[Warren Heaviside (wheavisi)]

Experts,

 

I'm configuring MVA and having the following issue:

 

PSTN call comes into HQ H.323 G/W from 415-888-4343.  Caller hears the
VXML script prompt to enter the Remote Destination (4158884343) followed
by pound, then a prompt for their PIN followed by #.  The next prompt is
to press 1# to place a call.  After the number is dialed I can see the
line appearance for HQ Phone x5002 go offhook but hear the Cisco reorder
verbiage "your call cannot".  The number unsuccessfully being dialed
via MVA can be successfully dialed directly from the same HQ phone
x5002. My MVA number is 5009 in CUCM.  The POTS and VOIP dial peers
are below.  Thanks for looking.

 

dial-peer voice 5009 pots

 service ccm

 incoming called-number 5009

 no digit-strip

 

dial-peer voice 5000 voip

 destination-pattern 5...$

 voice-class codec 1

 session target ipv4:10.10.210.11

 dtmf-relay h245-alphanumeric

 no vad 

 

application

  service CCM http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml

 

Warren Heavisidewheav...@cisco.com

ENGINEER.CUSTOMER SUPPORT

Phone: +1 408 853 7995

Office Hour 9 am - 5 pm Pacific Monday - Friday

 

For corporate legal information go to:

http://www.cisco.com/web/about/doing_business/legal/cri/index.html

 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Mobile voice access asking userid rather then pin

[laurent.bourmaud]

Hi,

It seems that I have an issue getting the MVA oerational.

Actually I use a H323 gatway connected to the CUCM, so when I call from my 
remote destination I have the prompt saying " Please enter your userid ..." 
rather than getting the pin prompt.

I did a trace on the CUCM then it seems that my remote destination is properly 
recognized :

2010-06-24 18:21:01,269 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]:: IVR get Filename
2010-06-24 18:21:01,270 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile()
2010-06-24 18:21:01,271 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 1.au and  
locale = en_US
2010-06-24 18:21:01,271 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::execute(): action start
2010-06-24 18:21:01,272 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 1.au and  
locale = en_US
2010-06-24 18:21:01,273 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::srcdir: en_US
2010-06-24 18:21:01,274 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::-new-code-got-callerid-as-remotedest: 
+447976852817
2010-06-24 18:21:01,275 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]:: getting the file now
2010-06-24 18:21:01,275 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::srcdir: en_US   
sessionid:1472FAADA95E59CFE334AD38AFA395FF
2010-06-24 18:21:01,277 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::remotedest: +447976852817   
sessionid:1472FAADA95E59CFE334AD38AFA395FF
2010-06-24 18:21:01,278 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Host: 10.100.210.11:8080
2010-06-24 18:21:01,279 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Content-Type 
application/x-www-form-urlencoded
2010-06-24 18:21:01,279 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Connection: close
2010-06-24 18:21:01,280 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Accept: text/vxml, text/x-vxml, 
application/vxml, application/x-vxml, application/voicexml, 
application/x-voicexml, text/plain, text/html, audio/basic, audio/wav, 
multipart/form-data, application/octet-stream
2010-06-24 18:21:01,280 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::User-Agent: Cisco-IOS-C3845/12.4
2010-06-24 18:21:01,281 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- getUserIdFromRemoteDestination- DB Query -->   remoteDest  = 
+447976852817
2010-06-24 18:21:01,285 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- isPartialMatchEnabled --DB Query -->   sql:  = select paramValue 
from processconfig where paramName ='RemDestCallerIDMatchType' and tkService 
='0'
2010-06-24 18:21:01,325 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- isPartialMatchEnabled --DB Query -->   RemDestCallerIDMatchType:  
= 1
2010-06-24 18:21:01,327 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- getUserIdFromRemoteDestination()  -- partial match enabled
2010-06-24 18:21:01,328 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- getNumDigitsPartialMatch --DB Query -->   sql:  = select 
paramValue from processconfig where paramName ='RemDestCallerIDMatchDigits' and 
tkService ='0'
2010-06-24 18:21:01,329 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]IVRDBInterface.getUserIdFromRemoteDestination() 
-->java.lang.NullPointerException
2010-06-24 18:21:01,329 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::ccmusername: null
2010-06-24 18:21:01,330 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::ccmusername:is Null ?? null
2010-06-24 18:21:01,331 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]IVRCallerIdLookup::execute(): 
ccmusername is Null and action forwarding IVRUserid
2010-06-24 18:21:04,631 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile - [CCM_IVR]:: IVR get Filename
2010-06-24 18:21:04,632 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile()
2010-06-24 18:21:04,633 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 3.au and  
locale = en_US
2010-06-24 18:21:04,634 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 3.au and  
locale = en_US
2010-06-24 18:21:04,637 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile - [CCM_IVR]:: getting the file now




However there is the error message "IVRCallerIdLookup::execute(): ccmusername 
is Null and action forwarding IVRUserid " where I do not understant what's 
wrong as my userid is properly configured and added to the dn ?

Does anyone have any ideas ?

Regards

Laurent

*

[OSL | CCIE_Voice] Mobile voice access asking userid rather then pin

[laurent.bourmaud]

Hi,

It seems that I have an issue getting the MVA oerational.

Actually I use a H323 gatway connected to the CUCM, so when I call from my 
remote destination I have the prompt saying " Please enter your userid ..." 
rather than getting the pin prompt.

I did a trace on the CUCM then it seems that my remote destination is properly 
recognized :

2010-06-24 18:21:01,269 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]:: IVR get Filename 
2010-06-24 18:21:01,270 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() 
2010-06-24 18:21:01,271 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 1.au and  
locale = en_US
2010-06-24 18:21:01,271 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::execute(): action start
2010-06-24 18:21:01,272 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 1.au and  
locale = en_US
2010-06-24 18:21:01,273 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::srcdir: en_US
2010-06-24 18:21:01,274 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::-new-code-got-callerid-as-remotedest: 
+447976852817
2010-06-24 18:21:01,275 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]:: getting the file now
2010-06-24 18:21:01,275 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::srcdir: en_US   
sessionid:1472FAADA95E59CFE334AD38AFA395FF
2010-06-24 18:21:01,277 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::remotedest: +447976852817   
sessionid:1472FAADA95E59CFE334AD38AFA395FF
2010-06-24 18:21:01,278 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Host: 10.100.210.11:8080
2010-06-24 18:21:01,279 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Content-Type 
application/x-www-form-urlencoded
2010-06-24 18:21:01,279 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Connection: close
2010-06-24 18:21:01,280 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Accept: text/vxml, text/x-vxml, 
application/vxml, application/x-vxml, application/voicexml, 
application/x-voicexml, text/plain, text/html, audio/basic, audio/wav, 
multipart/form-data, application/octet-stream
2010-06-24 18:21:01,280 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::User-Agent: Cisco-IOS-C3845/12.4
2010-06-24 18:21:01,281 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- getUserIdFromRemoteDestination- DB Query -->   remoteDest  = 
+447976852817
2010-06-24 18:21:01,285 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- isPartialMatchEnabled --DB Query -->   sql:  = select paramValue 
from processconfig where paramName ='RemDestCallerIDMatchType' and tkService 
='0' 
2010-06-24 18:21:01,325 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- isPartialMatchEnabled --DB Query -->   RemDestCallerIDMatchType:  
= 1
2010-06-24 18:21:01,327 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- getUserIdFromRemoteDestination()  -- partial match enabled
2010-06-24 18:21:01,328 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- getNumDigitsPartialMatch --DB Query -->   sql:  = select 
paramValue from processconfig where paramName ='RemDestCallerIDMatchDigits' and 
tkService ='0' 
2010-06-24 18:21:01,329 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]IVRDBInterface.getUserIdFromRemoteDestination() 
-->java.lang.NullPointerException
2010-06-24 18:21:01,329 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::ccmusername: null
2010-06-24 18:21:01,330 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::ccmusername:is Null ?? null
2010-06-24 18:21:01,331 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]IVRCallerIdLookup::execute(): 
ccmusername is Null and action forwarding IVRUserid  
2010-06-24 18:21:04,631 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile - [CCM_IVR]:: IVR get Filename 
2010-06-24 18:21:04,632 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() 
2010-06-24 18:21:04,633 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 3.au and  
locale = en_US
2010-06-24 18:21:04,634 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 3.au and  
locale = en_US
2010-06-24 18:21:04,637 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile - [CCM_IVR]:: getting the file now




However there is the error message "IVRCallerIdLookup::execute(): ccmusername 
is Null and action forwarding IVRUserid " where I do not understant what's 
wrong as my userid is properly configured and added to the dn ?

Does anyone have any ideas ?

Regards

Laurent

*