Re: [OSL | CCIE_Voice] Multicast MOH with Branch IP Phones
Hi, Who is putting who on hold? Are you using the same MRGLs for IPPhone that you used for the Gateway? Julien 2011/11/28 brajesh kumaR brjku...@gmail.com Can you please check if branch sites phones have MRGL assigned. What is the region setting between BR1 phone and moh server.If it is g729 then transcoder will be invoked to send spoofed moh stream to branch phone using flash moh file. Regards, Brajesh. On Mon, Nov 28, 2011 at 7:06 AM, Pradeep Kumar Sharma sonu.netwo...@gmail.com wrote: Hello Experts, I am working on Branch site Multicast MOH example and spoofing the moh from router flash memory. My MOH server inter-region setting is G711 for all branch sites. When placing a PSTN call on hold from a Branch phone, the Moh spoofing is working perfectly. When placing a internal branch to branch call on hold, moh is not working and i am getting a dead-air. At the same time:- - There is no debug output on the branch router. (debug ccm-manager music-on-hold all) - show perf query class Cisco MOH Device on call manager CLI showing MOHMulticastResourceActive = 1 - ccm-manager music-on-hold applied on the Branch router. - multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP# applied on branch router. - Only 1 MOH server in MRGL with Multicast enabled. (max hop = 1) - Multicast routing is disabled on HQ and Branch Site for moh spoofing. Any thought ? -SONU- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Multicast MOH with Branch IP Phones
Pls check ip pim dense-mode configured for Voice vlan interface as well multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP# also add (br1 phones) vlan interface ip Thanks On Mon, Nov 28, 2011 at 2:11 PM, Julien Krieger krieger.jul...@gmail.comwrote: Hi, Who is putting who on hold? Are you using the same MRGLs for IPPhone that you used for the Gateway? Julien 2011/11/28 brajesh kumaR brjku...@gmail.com Can you please check if branch sites phones have MRGL assigned. What is the region setting between BR1 phone and moh server.If it is g729 then transcoder will be invoked to send spoofed moh stream to branch phone using flash moh file. Regards, Brajesh. On Mon, Nov 28, 2011 at 7:06 AM, Pradeep Kumar Sharma sonu.netwo...@gmail.com wrote: Hello Experts, I am working on Branch site Multicast MOH example and spoofing the moh from router flash memory. My MOH server inter-region setting is G711 for all branch sites. When placing a PSTN call on hold from a Branch phone, the Moh spoofing is working perfectly. When placing a internal branch to branch call on hold, moh is not working and i am getting a dead-air. At the same time:- - There is no debug output on the branch router. (debug ccm-manager music-on-hold all) - show perf query class Cisco MOH Device on call manager CLI showing MOHMulticastResourceActive = 1 - ccm-manager music-on-hold applied on the Branch router. - multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP# applied on branch router. - Only 1 MOH server in MRGL with Multicast enabled. (max hop = 1) - Multicast routing is disabled on HQ and Branch Site for moh spoofing. Any thought ? -SONU- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Multicast MOH with Branch IP Phones
Thank you all for reply. Mohd Baqari : All are 7961 Phones. Brajesh kumaR : MRGL has been assign to all phone's device pools ( not on individual phones) Julien Krieger : BR2 Ph-1 placing BR2 Ph-2 on hold *or* BR1 Ph-1 placing BR1 Ph-2 on hold *or* BR1 Phones placing BR2 Phones and vice versa. Ken Wyan : multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP# - fast eth is a Voice sub Interface IP add. I tried adding ip pim dense-mode on voice sub interface but no luck. -SONU- On Mon, Nov 28, 2011 at 4:45 PM, Ken Wyan kew...@gmail.com wrote: Pls check ip pim dense-mode configured for Voice vlan interface as well multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP#also add (br1 phones) vlan interface ip Thanks On Mon, Nov 28, 2011 at 2:11 PM, Julien Krieger krieger.jul...@gmail.comwrote: Hi, Who is putting who on hold? Are you using the same MRGLs for IPPhone that you used for the Gateway? Julien 2011/11/28 brajesh kumaR brjku...@gmail.com Can you please check if branch sites phones have MRGL assigned. What is the region setting between BR1 phone and moh server.If it is g729 then transcoder will be invoked to send spoofed moh stream to branch phone using flash moh file. Regards, Brajesh. On Mon, Nov 28, 2011 at 7:06 AM, Pradeep Kumar Sharma sonu.netwo...@gmail.com wrote: Hello Experts, I am working on Branch site Multicast MOH example and spoofing the moh from router flash memory. My MOH server inter-region setting is G711 for all branch sites. When placing a PSTN call on hold from a Branch phone, the Moh spoofing is working perfectly. When placing a internal branch to branch call on hold, moh is not working and i am getting a dead-air. At the same time:- - There is no debug output on the branch router. (debug ccm-manager music-on-hold all) - show perf query class Cisco MOH Device on call manager CLI showing MOHMulticastResourceActive = 1 - ccm-manager music-on-hold applied on the Branch router. - multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP# applied on branch router. - Only 1 MOH server in MRGL with Multicast enabled. (max hop = 1) - Multicast routing is disabled on HQ and Branch Site for moh spoofing. Any thought ? -SONU- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Multicast MOH with Branch IP Phones
Hey Pradeep, Try this if not done already: 1) Put the Multicast MOH server in a Device Pool named MOH with Region named MOH. 2) All other regions should talk to this MOH region with G711. 3) On the MOH server enabled with Multicast, put the MAX HOP value to 1. 4) Make sure that the BR Gateway is in BR1 or BR2 (whichever is meant to be). 5) The correct Device Pools should be applied on all IP Phones. Hope this Helps. Regards Gurpreet On Sun, Nov 27, 2011 at 8:36 PM, Pradeep Kumar Sharma sonu.netwo...@gmail.com wrote: Hello Experts, I am working on Branch site Multicast MOH example and spoofing the moh from router flash memory. My MOH server inter-region setting is G711 for all branch sites. When placing a PSTN call on hold from a Branch phone, the Moh spoofing is *working* perfectly. When placing a internal branch to branch call on hold, moh is *not working * and i am getting a dead-air. At the same time:- - There is no debug output on the branch router. (debug ccm-manager music-on-hold all) - *show perf query class Cisco MOH Device *on call manager CLI showing *MOHMulticastResourceActive = 1* - ccm-manager music-on-hold applied on the Branch router. - multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP# applied on branch router. - Only 1 MOH server in MRGL with Multicast enabled. (max hop = 1) - Multicast routing is disabled on HQ and Branch Site for moh spoofing. Any thought ? -SONU- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Multicast MOH with Branch IP Phones
Hello Experts, I am working on Branch site Multicast MOH example and spoofing the moh from router flash memory. My MOH server inter-region setting is G711 for all branch sites. When placing a PSTN call on hold from a Branch phone, the Moh spoofing is * working* perfectly. When placing a internal branch to branch call on hold, moh is *not working*and i am getting a dead-air. At the same time:- - There is no debug output on the branch router. (debug ccm-manager music-on-hold all) - *show perf query class Cisco MOH Device *on call manager CLI showing *MOHMulticastResourceActive = 1* - ccm-manager music-on-hold applied on the Branch router. - multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP# applied on branch router. - Only 1 MOH server in MRGL with Multicast enabled. (max hop = 1) - Multicast routing is disabled on HQ and Branch Site for moh spoofing. Any thought ? -SONU- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Multicast MOH with Branch IP Phones
What are the phone models confirm that both support multicast MoH Regards, Mohammed Al Baqari Sent from my iPhone On Nov 28, 2011, at 5:36 AM, Pradeep Kumar Sharma sonu.netwo...@gmail.com wrote: Hello Experts, I am working on Branch site Multicast MOH example and spoofing the moh from router flash memory. My MOH server inter-region setting is G711 for all branch sites. When placing a PSTN call on hold from a Branch phone, the Moh spoofing is working perfectly. When placing a internal branch to branch call on hold, moh is not working and i am getting a dead-air. At the same time:- - There is no debug output on the branch router. (debug ccm-manager music-on-hold all) - show perf query class Cisco MOH Device on call manager CLI showing MOHMulticastResourceActive = 1 - ccm-manager music-on-hold applied on the Branch router. - multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP# applied on branch router. - Only 1 MOH server in MRGL with Multicast enabled. (max hop = 1) - Multicast routing is disabled on HQ and Branch Site for moh spoofing. Any thought ? -SONU- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Multicast MOH with Branch IP Phones
Can you please check if branch sites phones have MRGL assigned. What is the region setting between BR1 phone and moh server.If it is g729 then transcoder will be invoked to send spoofed moh stream to branch phone using flash moh file. Regards, Brajesh. On Mon, Nov 28, 2011 at 7:06 AM, Pradeep Kumar Sharma sonu.netwo...@gmail.com wrote: Hello Experts, I am working on Branch site Multicast MOH example and spoofing the moh from router flash memory. My MOH server inter-region setting is G711 for all branch sites. When placing a PSTN call on hold from a Branch phone, the Moh spoofing is working perfectly. When placing a internal branch to branch call on hold, moh is not working and i am getting a dead-air. At the same time:- - There is no debug output on the branch router. (debug ccm-manager music-on-hold all) - show perf query class Cisco MOH Device on call manager CLI showing MOHMulticastResourceActive = 1 - ccm-manager music-on-hold applied on the Branch router. - multicast moh 239.1.1.1 port 16384 route #fast ethernet IP # #Loop0 IP# applied on branch router. - Only 1 MOH server in MRGL with Multicast enabled. (max hop = 1) - Multicast routing is disabled on HQ and Branch Site for moh spoofing. Any thought ? -SONU- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
