[OSL | CCIE_Voice] Probleme with conference Bridge BR1
Hi Guys, Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL). I have configured the voice-card 0 to share the DSP like this voice-card 0 no dspfarm dsp services dspfarm But when it comes to CFB configuration, the max number of session is 0-0 :D It happened to me before on HQ-RTR but this was because i forgot the voice-card configuration :() BR1-RTR(config)#dspfarm profile 3 conf BR1-RTR(config-dspfarm-profile)#max sess 1 ^ % Invalid input detected at '^' marker. BR1-RTR(config-dspfarm-profile)#max sess ? 0-0 Number of sessions assigned to this profile Here is the full configuration : BR1-RTR#sh Oct 26 20:53:05.391: %SYS-5-CONFIG_I: Configured from console by console BR1-RTR#sh run Building configuration... Current configuration : 6051 bytes ! ! Last configuration change at 20:53:05 UTC Fri Oct 26 2012 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BR1-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ! dot11 syslog ip source-route ! ! ip cef ! ! ip domain name proctorlabs.com no ipv6 cef ! multilink bundle-name authenticated ! ! isdn switch-type primary-ni ! ! ! voice service voip allow-connections sip to h323 allow-connections sip to sip sip registrar server ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice register global max-dn 1 max-pool 1 ! voice register pool 1 id network 10.10.201.0 mask 255.255.255.0 application sip.app preference 2 incoming called-number codec g711ulaw ! ! voice translation-rule 1 rule 1 /617863\(1...\)$/ /\1/ ! voice translation-rule 7 rule 1 /^1...$/ /863\0/ ! voice translation-rule 10 rule 1 /^1...$/ /617863\0/ ! voice translation-rule 1001 rule 1 /^1001$/ /1002/ ! ! voice translation-profile 1001 translate redirect-called 1001 ! voice translation-profile 10digit translate calling 10 ! voice translation-profile 7digit translate calling 7 ! voice translation-profile strip-dnis translate called 1 ! ! voice-card 0 no dspfarm dsp services dspfarm ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-3,24 service mgcp ! controller T1 0/0/1 framing esf linecode b8zs channel-group 0 timeslots 1-24 ! ! ! ! ! interface Loopback0 ip address 10.10.110.2 255.255.255.255 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager no cdp enable ! interface Serial0/0/1:0 no ip address encapsulation frame-relay IETF no fair-queue frame-relay lmi-type ansi ! interface Serial0/0/1:0.1 point-to-point bandwidth 1536 ip address 10.10.111.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 101 ! interface FastEthernet1/0 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/1 ! interface FastEthernet1/2 ! interface FastEthernet1/3 ! interface FastEthernet1/4 ! interface FastEthernet1/5 ! interface FastEthernet1/6 ! interface FastEthernet1/7 ! interface FastEthernet1/8 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/9 ! interface FastEthernet1/10 ! interface FastEthernet1/11 ! interface FastEthernet1/12 ! interface FastEthernet1/13 ! interface FastEthernet1/14 ! interface FastEthernet1/15 ! interface Vlan1 no ip address ! interface Vlan130 ip address 10.10.101.1 255.255.255.0 ! interface Vlan240 ip address 10.10.201.1 255.255.255.0 ip helper-address 10.10.210.11 ! router ospf 1 router-id 10.10.101.1 log-adjacency-changes network 10.10.0.0 0.0.255.255 area 0 ! no ip forward-protocol nd no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! ! control-plane ! ! ! voice-port 0/0/0:23 translation-profile incoming strip-dnis ! ccm-manager switchback immediate ccm-manager fallback-mgcp ccm-manager redundant-host 10.10.210.10 ccm-manager mgcp ccm-manager music-on-hold ! mgcp call-agent 10.10.210.11 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp bind control source-interface Loopback0 mgcp bind media source-interface Loopback0 ! mgcp profile default ! sccp local Loopback0 sccp ccm 10.10.210.10 identifier 2 version 6.0 sccp ccm 10.10.210.11 identifier 1 version 6.0 sccp ! sccp ccm group 1 associate ccm 1 priority 1 associate ccm 2 priority 2 associate profile 3 register BR1_CFB ! dspfarm profile 3 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 associate application SCCP shutdown ! dial-peer cor custom name pt-internal
Re: [OSL | CCIE_Voice] Probleme with conference Bridge BR1
Try it with voice-card 0 with dspfarm also. Then the sessions under the media resource. On Fri, Oct 26, 2012 at 12:54 PM, Nicolas MICHEL mcl.nico...@gmail.comwrote: Hi Guys, Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL). I have configured the voice-card 0 to share the DSP like this voice-card 0 no dspfarm dsp services dspfarm But when it comes to CFB configuration, the max number of session is 0-0 :D It happened to me before on HQ-RTR but this was because i forgot the voice-card configuration :() BR1-RTR(config)#dspfarm profile 3 conf BR1-RTR(config-dspfarm-profile)#max sess 1 ^ % Invalid input detected at '^' marker. BR1-RTR(config-dspfarm-profile)#max sess ? 0-0 Number of sessions assigned to this profile Here is the full configuration : BR1-RTR#sh Oct 26 20:53:05.391: %SYS-5-CONFIG_I: Configured from console by console BR1-RTR#sh run Building configuration... Current configuration : 6051 bytes ! ! Last configuration change at 20:53:05 UTC Fri Oct 26 2012 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BR1-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ! dot11 syslog ip source-route ! ! ip cef ! ! ip domain name proctorlabs.com no ipv6 cef ! multilink bundle-name authenticated ! ! isdn switch-type primary-ni ! ! ! voice service voip allow-connections sip to h323 allow-connections sip to sip sip registrar server ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice register global max-dn 1 max-pool 1 ! voice register pool 1 id network 10.10.201.0 mask 255.255.255.0 application sip.app preference 2 incoming called-number codec g711ulaw ! ! voice translation-rule 1 rule 1 /617863\(1...\)$/ /\1/ ! voice translation-rule 7 rule 1 /^1...$/ /863\0/ ! voice translation-rule 10 rule 1 /^1...$/ /617863\0/ ! voice translation-rule 1001 rule 1 /^1001$/ /1002/ ! ! voice translation-profile 1001 translate redirect-called 1001 ! voice translation-profile 10digit translate calling 10 ! voice translation-profile 7digit translate calling 7 ! voice translation-profile strip-dnis translate called 1 ! ! voice-card 0 no dspfarm dsp services dspfarm ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-3,24 service mgcp ! controller T1 0/0/1 framing esf linecode b8zs channel-group 0 timeslots 1-24 ! ! ! ! ! interface Loopback0 ip address 10.10.110.2 255.255.255.255 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager no cdp enable ! interface Serial0/0/1:0 no ip address encapsulation frame-relay IETF no fair-queue frame-relay lmi-type ansi ! interface Serial0/0/1:0.1 point-to-point bandwidth 1536 ip address 10.10.111.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 101 ! interface FastEthernet1/0 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/1 ! interface FastEthernet1/2 ! interface FastEthernet1/3 ! interface FastEthernet1/4 ! interface FastEthernet1/5 ! interface FastEthernet1/6 ! interface FastEthernet1/7 ! interface FastEthernet1/8 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/9 ! interface FastEthernet1/10 ! interface FastEthernet1/11 ! interface FastEthernet1/12 ! interface FastEthernet1/13 ! interface FastEthernet1/14 ! interface FastEthernet1/15 ! interface Vlan1 no ip address ! interface Vlan130 ip address 10.10.101.1 255.255.255.0 ! interface Vlan240 ip address 10.10.201.1 255.255.255.0 ip helper-address 10.10.210.11 ! router ospf 1 router-id 10.10.101.1 log-adjacency-changes network 10.10.0.0 0.0.255.255 area 0 ! no ip forward-protocol nd no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! ! control-plane ! ! ! voice-port 0/0/0:23 translation-profile incoming strip-dnis ! ccm-manager switchback immediate ccm-manager fallback-mgcp ccm-manager redundant-host 10.10.210.10 ccm-manager mgcp ccm-manager music-on-hold ! mgcp call-agent 10.10.210.11 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp bind control source-interface Loopback0 mgcp bind media source-interface Loopback0 ! mgcp profile default ! sccp
Re: [OSL | CCIE_Voice] Probleme with conference Bridge BR1
Same result :( Le Friday, October 26, 2012 6:57:30 PM, Abel ... a écrit : Try it with voice-card 0 with dspfarm also. Then the sessions under the media resource. On Fri, Oct 26, 2012 at 12:54 PM, Nicolas MICHEL mcl.nico...@gmail.com mailto:mcl.nico...@gmail.com wrote: Hi Guys, Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL). I have configured the voice-card 0 to share the DSP like this voice-card 0 no dspfarm dsp services dspfarm But when it comes to CFB configuration, the max number of session is 0-0 :D It happened to me before on HQ-RTR but this was because i forgot the voice-card configuration :() BR1-RTR(config)#dspfarm profile 3 conf BR1-RTR(config-dspfarm-profile)#max sess 1 ^ % Invalid input detected at '^' marker. BR1-RTR(config-dspfarm-profile)#max sess ? 0-0 Number of sessions assigned to this profile Here is the full configuration : BR1-RTR#sh Oct 26 20:53:05.391: %SYS-5-CONFIG_I: Configured from console by console BR1-RTR#sh run Building configuration... Current configuration : 6051 bytes ! ! Last configuration change at 20:53:05 UTC Fri Oct 26 2012 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BR1-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ! dot11 syslog ip source-route ! ! ip cef ! ! ip domain name proctorlabs.com http://proctorlabs.com no ipv6 cef ! multilink bundle-name authenticated ! ! isdn switch-type primary-ni ! ! ! voice service voip allow-connections sip to h323 allow-connections sip to sip sip registrar server ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice register global max-dn 1 max-pool 1 ! voice register pool 1 id network 10.10.201.0 mask 255.255.255.0 application sip.app preference 2 incoming called-number codec g711ulaw ! ! voice translation-rule 1 rule 1 /617863\(1...\)$/ /\1/ ! voice translation-rule 7 rule 1 /^1...$/ /863\0/ ! voice translation-rule 10 rule 1 /^1...$/ /617863\0/ ! voice translation-rule 1001 rule 1 /^1001$/ /1002/ ! ! voice translation-profile 1001 translate redirect-called 1001 ! voice translation-profile 10digit translate calling 10 ! voice translation-profile 7digit translate calling 7 ! voice translation-profile strip-dnis translate called 1 ! ! voice-card 0 no dspfarm dsp services dspfarm ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-3,24 service mgcp ! controller T1 0/0/1 framing esf linecode b8zs channel-group 0 timeslots 1-24 ! ! ! ! ! interface Loopback0 ip address 10.10.110.2 255.255.255.255 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager no cdp enable ! interface Serial0/0/1:0 no ip address encapsulation frame-relay IETF no fair-queue frame-relay lmi-type ansi ! interface Serial0/0/1:0.1 point-to-point bandwidth 1536 ip address 10.10.111.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 101 ! interface FastEthernet1/0 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/1 ! interface FastEthernet1/2 ! interface FastEthernet1/3 ! interface FastEthernet1/4 ! interface FastEthernet1/5 ! interface FastEthernet1/6 ! interface FastEthernet1/7 ! interface FastEthernet1/8 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/9 ! interface FastEthernet1/10 ! interface FastEthernet1/11 ! interface FastEthernet1/12 ! interface FastEthernet1/13 ! interface FastEthernet1/14 ! interface FastEthernet1/15 ! interface Vlan1 no ip address ! interface Vlan130 ip
Re: [OSL | CCIE_Voice] Probleme with conference Bridge BR1
Complete shot in the dark. I am pretty sure moh uses dsp resources. Remove the moh commands and try again. If that does not, keep the commands removed and reload the router. Sent from my iPhone On Oct 26, 2012, at 1:02 PM, Nicolas MICHEL mcl.nico...@gmail.com wrote: Same result :( Le Friday, October 26, 2012 6:57:30 PM, Abel ... a écrit : Try it with voice-card 0 with dspfarm also. Then the sessions under the media resource. On Fri, Oct 26, 2012 at 12:54 PM, Nicolas MICHEL mcl.nico...@gmail.com mailto:mcl.nico...@gmail.com wrote: Hi Guys, Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL). I have configured the voice-card 0 to share the DSP like this voice-card 0 no dspfarm dsp services dspfarm But when it comes to CFB configuration, the max number of session is 0-0 :D It happened to me before on HQ-RTR but this was because i forgot the voice-card configuration :() BR1-RTR(config)#dspfarm profile 3 conf BR1-RTR(config-dspfarm-profile)#max sess 1 ^ % Invalid input detected at '^' marker. BR1-RTR(config-dspfarm-profile)#max sess ? 0-0 Number of sessions assigned to this profile Here is the full configuration : BR1-RTR#sh Oct 26 20:53:05.391: %SYS-5-CONFIG_I: Configured from console by console BR1-RTR#sh run Building configuration... Current configuration : 6051 bytes ! ! Last configuration change at 20:53:05 UTC Fri Oct 26 2012 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BR1-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ! dot11 syslog ip source-route ! ! ip cef ! ! ip domain name proctorlabs.com http://proctorlabs.com no ipv6 cef ! multilink bundle-name authenticated ! ! isdn switch-type primary-ni ! ! ! voice service voip allow-connections sip to h323 allow-connections sip to sip sip registrar server ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice register global max-dn 1 max-pool 1 ! voice register pool 1 id network 10.10.201.0 mask 255.255.255.0 application sip.app preference 2 incoming called-number codec g711ulaw ! ! voice translation-rule 1 rule 1 /617863\(1...\)$/ /\1/ ! voice translation-rule 7 rule 1 /^1...$/ /863\0/ ! voice translation-rule 10 rule 1 /^1...$/ /617863\0/ ! voice translation-rule 1001 rule 1 /^1001$/ /1002/ ! ! voice translation-profile 1001 translate redirect-called 1001 ! voice translation-profile 10digit translate calling 10 ! voice translation-profile 7digit translate calling 7 ! voice translation-profile strip-dnis translate called 1 ! ! voice-card 0 no dspfarm dsp services dspfarm ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-3,24 service mgcp ! controller T1 0/0/1 framing esf linecode b8zs channel-group 0 timeslots 1-24 ! ! ! ! ! interface Loopback0 ip address 10.10.110.2 255.255.255.255 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager no cdp enable ! interface Serial0/0/1:0 no ip address encapsulation frame-relay IETF no fair-queue frame-relay lmi-type ansi ! interface Serial0/0/1:0.1 point-to-point bandwidth 1536 ip address 10.10.111.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 101 ! interface FastEthernet1/0 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/1 ! interface FastEthernet1/2 ! interface FastEthernet1/3 ! interface FastEthernet1/4 ! interface FastEthernet1/5 ! interface FastEthernet1/6 ! interface FastEthernet1/7 ! interface FastEthernet1/8 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/9 !
Re: [OSL | CCIE_Voice] Probleme with conference Bridge BR1
I'm not using PL, but in my lab I had to reload the router before reallocating DSPs to different services. I'd suggest doing no dspfarm, remove profiles, reload the router and then configure like you want from scratch. There is also a *show dspfarm all command, which should show you what DSP is used where. * On Fri, Oct 26, 2012 at 2:10 PM, Cory Gray corygray22...@hotmail.comwrote: Complete shot in the dark. I am pretty sure moh uses dsp resources. Remove the moh commands and try again. If that does not, keep the commands removed and reload the router. Sent from my iPhone On Oct 26, 2012, at 1:02 PM, Nicolas MICHEL mcl.nico...@gmail.com wrote: Same result :( Le Friday, October 26, 2012 6:57:30 PM, Abel ... a écrit : Try it with voice-card 0 with dspfarm also. Then the sessions under the media resource. On Fri, Oct 26, 2012 at 12:54 PM, Nicolas MICHEL mcl.nico...@gmail.com mailto:mcl.nico...@gmail.com wrote: Hi Guys, Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL). I have configured the voice-card 0 to share the DSP like this voice-card 0 no dspfarm dsp services dspfarm But when it comes to CFB configuration, the max number of session is 0-0 :D It happened to me before on HQ-RTR but this was because i forgot the voice-card configuration :() BR1-RTR(config)#dspfarm profile 3 conf BR1-RTR(config-dspfarm-profile)#max sess 1 ^ % Invalid input detected at '^' marker. BR1-RTR(config-dspfarm-profile)#max sess ? 0-0 Number of sessions assigned to this profile Here is the full configuration : BR1-RTR#sh Oct 26 20:53:05.391: %SYS-5-CONFIG_I: Configured from console by console BR1-RTR#sh run Building configuration... Current configuration : 6051 bytes ! ! Last configuration change at 20:53:05 UTC Fri Oct 26 2012 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BR1-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ! dot11 syslog ip source-route ! ! ip cef ! ! ip domain name proctorlabs.com http://proctorlabs.com no ipv6 cef ! multilink bundle-name authenticated ! ! isdn switch-type primary-ni ! ! ! voice service voip allow-connections sip to h323 allow-connections sip to sip sip registrar server ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice register global max-dn 1 max-pool 1 ! voice register pool 1 id network 10.10.201.0 mask 255.255.255.0 application sip.app preference 2 incoming called-number codec g711ulaw ! ! voice translation-rule 1 rule 1 /617863\(1...\)$/ /\1/ ! voice translation-rule 7 rule 1 /^1...$/ /863\0/ ! voice translation-rule 10 rule 1 /^1...$/ /617863\0/ ! voice translation-rule 1001 rule 1 /^1001$/ /1002/ ! ! voice translation-profile 1001 translate redirect-called 1001 ! voice translation-profile 10digit translate calling 10 ! voice translation-profile 7digit translate calling 7 ! voice translation-profile strip-dnis translate called 1 ! ! voice-card 0 no dspfarm dsp services dspfarm ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-3,24 service mgcp ! controller T1 0/0/1 framing esf linecode b8zs channel-group 0 timeslots 1-24 ! ! ! ! ! interface Loopback0 ip address 10.10.110.2 255.255.255.255 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager no cdp enable ! interface Serial0/0/1:0 no ip address encapsulation frame-relay IETF no fair-queue frame-relay lmi-type ansi ! interface Serial0/0/1:0.1 point-to-point bandwidth 1536 ip address 10.10.111.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status
Re: [OSL | CCIE_Voice] Probleme with conference Bridge BR1
Do show inv and maybe show diag | inc PVDM also try show voice dscp group all Or at least I think that might help see if the dscp resources are available Bill On Oct 26, 2012, at 12:02 PM, Nicolas MICHEL mcl.nico...@gmail.com wrote: Same result :( Le Friday, October 26, 2012 6:57:30 PM, Abel ... a écrit : Try it with voice-card 0 with dspfarm also. Then the sessions under the media resource. On Fri, Oct 26, 2012 at 12:54 PM, Nicolas MICHEL mcl.nico...@gmail.com mailto:mcl.nico...@gmail.com wrote: Hi Guys, Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL). I have configured the voice-card 0 to share the DSP like this voice-card 0 no dspfarm dsp services dspfarm But when it comes to CFB configuration, the max number of session is 0-0 :D It happened to me before on HQ-RTR but this was because i forgot the voice-card configuration :() BR1-RTR(config)#dspfarm profile 3 conf BR1-RTR(config-dspfarm-profile)#max sess 1 ^ % Invalid input detected at '^' marker. BR1-RTR(config-dspfarm-profile)#max sess ? 0-0 Number of sessions assigned to this profile Here is the full configuration : BR1-RTR#sh Oct 26 20:53:05.391: %SYS-5-CONFIG_I: Configured from console by console BR1-RTR#sh run Building configuration... Current configuration : 6051 bytes ! ! Last configuration change at 20:53:05 UTC Fri Oct 26 2012 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BR1-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ! dot11 syslog ip source-route ! ! ip cef ! ! ip domain name proctorlabs.com http://proctorlabs.com no ipv6 cef ! multilink bundle-name authenticated ! ! isdn switch-type primary-ni ! ! ! voice service voip allow-connections sip to h323 allow-connections sip to sip sip registrar server ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice register global max-dn 1 max-pool 1 ! voice register pool 1 id network 10.10.201.0 mask 255.255.255.0 application sip.app preference 2 incoming called-number codec g711ulaw ! ! voice translation-rule 1 rule 1 /617863\(1...\)$/ /\1/ ! voice translation-rule 7 rule 1 /^1...$/ /863\0/ ! voice translation-rule 10 rule 1 /^1...$/ /617863\0/ ! voice translation-rule 1001 rule 1 /^1001$/ /1002/ ! ! voice translation-profile 1001 translate redirect-called 1001 ! voice translation-profile 10digit translate calling 10 ! voice translation-profile 7digit translate calling 7 ! voice translation-profile strip-dnis translate called 1 ! ! voice-card 0 no dspfarm dsp services dspfarm ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-3,24 service mgcp ! controller T1 0/0/1 framing esf linecode b8zs channel-group 0 timeslots 1-24 ! ! ! ! ! interface Loopback0 ip address 10.10.110.2 255.255.255.255 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager no cdp enable ! interface Serial0/0/1:0 no ip address encapsulation frame-relay IETF no fair-queue frame-relay lmi-type ansi ! interface Serial0/0/1:0.1 point-to-point bandwidth 1536 ip address 10.10.111.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 101 ! interface FastEthernet1/0 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/1 ! interface FastEthernet1/2 ! interface FastEthernet1/3 ! interface FastEthernet1/4 ! interface FastEthernet1/5 ! interface FastEthernet1/6 ! interface FastEthernet1/7 ! interface FastEthernet1/8 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/9 ! interface FastEthernet1/10 !
Re: [OSL | CCIE_Voice] Probleme with conference Bridge BR1
Well, show inventory should tell you what DSPs you have on the box. Since Conference DSPs can't be shared, you need at least a DSP for this, and a DSP to use for your PRI group. So you're going to need either a PVDM2-32 or more than one PVDM2-16, I suggest. If you have multiple DSPs installed across several PVDMs, then you might try : voice-card 0 dspfarm dsp services dspfarm if they're all on the same module. First thing for us to see would be output fromshow inventory I reckon we can look a bit more closely at why you're out of DSPs then. regards Peter On 10/26/2012 5:54 PM, Nicolas MICHEL wrote: Hi Guys, Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL). I have configured the voice-card 0 to share the DSP like this voice-card 0 no dspfarm dsp services dspfarm But when it comes to CFB configuration, the max number of session is 0-0 :D It happened to me before on HQ-RTR but this was because i forgot the voice-card configuration :() BR1-RTR(config)#dspfarm profile 3 conf BR1-RTR(config-dspfarm-profile)#max sess 1 ^ % Invalid input detected at '^' marker. BR1-RTR(config-dspfarm-profile)#max sess ? 0-0 Number of sessions assigned to this profile Here is the full configuration : BR1-RTR#sh Oct 26 20:53:05.391: %SYS-5-CONFIG_I: Configured from console by console BR1-RTR#sh run Building configuration... Current configuration : 6051 bytes ! ! Last configuration change at 20:53:05 UTC Fri Oct 26 2012 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BR1-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog ! no aaa new-model network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ! dot11 syslog ip source-route ! ! ip cef ! ! ip domain name proctorlabs.com no ipv6 cef ! multilink bundle-name authenticated ! ! isdn switch-type primary-ni ! ! ! voice service voip allow-connections sip to h323 allow-connections sip to sip sip registrar server ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice register global max-dn 1 max-pool 1 ! voice register pool 1 id network 10.10.201.0 mask 255.255.255.0 application sip.app preference 2 incoming called-number codec g711ulaw ! ! voice translation-rule 1 rule 1 /617863\(1...\)$/ /\1/ ! voice translation-rule 7 rule 1 /^1...$/ /863\0/ ! voice translation-rule 10 rule 1 /^1...$/ /617863\0/ ! voice translation-rule 1001 rule 1 /^1001$/ /1002/ ! ! voice translation-profile 1001 translate redirect-called 1001 ! voice translation-profile 10digit translate calling 10 ! voice translation-profile 7digit translate calling 7 ! voice translation-profile strip-dnis translate called 1 ! ! voice-card 0 no dspfarm dsp services dspfarm ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-3,24 service mgcp ! controller T1 0/0/1 framing esf linecode b8zs channel-group 0 timeslots 1-24 ! ! ! ! ! interface Loopback0 ip address 10.10.110.2 255.255.255.255 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager no cdp enable ! interface Serial0/0/1:0 no ip address encapsulation frame-relay IETF no fair-queue frame-relay lmi-type ansi ! interface Serial0/0/1:0.1 point-to-point bandwidth 1536 ip address 10.10.111.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 101 ! interface FastEthernet1/0 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/1 ! interface FastEthernet1/2 ! interface FastEthernet1/3 ! interface FastEthernet1/4 ! interface FastEthernet1/5 ! interface FastEthernet1/6 ! interface FastEthernet1/7 ! interface FastEthernet1/8 switchport trunk native vlan 130 switchport mode trunk switchport voice vlan 240 ! interface FastEthernet1/9 ! interface FastEthernet1/10 ! interface FastEthernet1/11 ! interface FastEthernet1/12 ! interface FastEthernet1/13 ! interface FastEthernet1/14 ! interface FastEthernet1/15 ! interface Vlan1 no ip address ! interface Vlan130 ip address 10.10.101.1 255.255.255.0 ! interface Vlan240 ip address 10.10.201.1 255.255.255.0 ip helper-address 10.10.210.11 ! router ospf 1 router-id 10.10.101.1 log-adjacency-changes network 10.10.0.0 0.0.255.255 area 0 ! no ip forward-protocol nd no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! ! control-plane ! ! ! voice-port 0/0/0:23 translation-profile incoming strip-dnis ! ccm-manager switchback immediate ccm-manager fallback-mgcp ccm-manager redundant-host 10.10.210.10 ccm-manager mgcp ccm-manager music-on-hold ! mgcp call-agent 10.10.210.11
