Re: [OSL | CCIE_Voice] RSVP WITH MLPoFR

2010-03-12 Thread Angel Perez 

Hello:

 

The same happend with multicast moh traffic, after activating auto qos  you 
need to move ip pim sparse-dense mode to the virtual template interface

 

thanks
 


From: roger.kallb...@cygate.se
To: gorr...@hotmail.com; ccie_voice@onlinestudylist.com
Date: Fri, 12 Mar 2010 06:18:37 +0100
Subject: RE: [OSL | CCIE_Voice] RSVP WITH MLPoFR







That’s the expected behavior. Auto qos won’t move the ip rsvp bandwith command. 
That’s one of the quirks with auto qos.
 
Brgds,

Roger Källberg
Unified Communication Consultant
Cygate AB


 


From: Angel Perez [mailto:gorr...@hotmail.com] 
Sent: den 10 mars 2010 19:37
To: osl osl
Subject: [OSL | CCIE_Voice] RSVP WITH MLPoFR
 
Hello:
 
I was configurin MLPoFR and LFI on a link between hq and br1, on the serial 
interface I had:
 
interface Serial0/2/0.202 point-to-point
  ip rsvp bandwidth 64 
 
Calls where progressing as configured (two g729 calls)
 
Then after apply auto qos voip trust fr-atm new virtual templates and virtual 
access interfaces are created
 
Then trying to test the policy-map just created and tuned I noticed that I 
could not make calls from hq to br1 (rsvp was rejecting the call)
 
So I added the following at hq and br1:
 
interface Virtual-Template200
 ip rsvp bandwidth 64
 
And the problem get solved
 
Is this the normal situation? I suppose it is but not 100% sure
 
Thanks
 
 



¿Te gustaría tener Hotmail en tu móvil Movistar? ¡Es gratis!
  
_
¿Te gustaría tener Hotmail en tu móvil Movistar? ¡Es gratis!
http://serviciosmoviles.es.msn.com/hotmail/movistar-particulares.aspx___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] RSVP WITH MLPoFR

2010-03-11 Thread Roger Källberg 
That's the expected behavior. Auto qos won't move the ip rsvp bandwith command. 
That's one of the quirks with auto qos.

Brgds,
Roger Källberg
Unified Communication Consultant
Cygate AB


From: Angel Perez [mailto:gorr...@hotmail.com]
Sent: den 10 mars 2010 19:37
To: osl osl
Subject: [OSL | CCIE_Voice] RSVP WITH MLPoFR

Hello:

I was configurin MLPoFR and LFI on a link between hq and br1, on the serial 
interface I had:

interface Serial0/2/0.202 point-to-point
  ip rsvp bandwidth 64

Calls where progressing as configured (two g729 calls)

Then after apply auto qos voip trust fr-atm new virtual templates and virtual 
access interfaces are created

Then trying to test the policy-map just created and tuned I noticed that I 
could not make calls from hq to br1 (rsvp was rejecting the call)

So I added the following at hq and br1:

interface Virtual-Template200
 ip rsvp bandwidth 64

And the problem get solved

Is this the normal situation? I suppose it is but not 100% sure

Thanks



¿Te gustaría tener Hotmail en tu móvil Movistar? ¡Es 
gratis!<http://serviciosmoviles.es.msn.com/hotmail/movistar-particulares.aspx>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] RSVP WITH MLPoFR

2010-03-11 Thread Angel Perez 

Hi Otto, thanks for your confirmation
 


Date: Thu, 11 Mar 2010 08:48:10 -0430
Subject: Re: [OSL | CCIE_Voice] RSVP WITH MLPoFR
From: o...@ipexpert.com
To: gorr...@hotmail.com
CC: ccie_voice@onlinestudylist.com

Hi Angel,

You are right, the "ip rsvp bandwidth" has to be configured wherever the 
outbound ip interface configuration is, as it will carry the reservation 
messages from one rsvp agent to the other, according to the routing protocol in 
place. In your case this new ip outbound interface is virtual-template200

HTH,

On Wed, Mar 10, 2010 at 2:06 PM, Angel Perez  wrote:



Hello:
 
I was configurin MLPoFR and LFI on a link between hq and br1, on the serial 
interface I had:
 
interface Serial0/2/0.202 point-to-point
  ip rsvp bandwidth 64 
 
Calls where progressing as configured (two g729 calls)
 
Then after apply auto qos voip trust fr-atm new virtual templates and virtual 
access interfaces are created
 
Then trying to test the policy-map just created and tuned I noticed that I 
could not make calls from hq to br1 (rsvp was rejecting the call)
 
So I added the following at hq and br1:
 
interface Virtual-Template200
 ip rsvp bandwidth 64
 
And the problem get solved
 
Is this the normal situation? I suppose it is but not 100% sure
 
Thanks

 
 



¿Te gustaría tener Hotmail en tu móvil Movistar? ¡Es gratis!
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com



-- 
Regards,

Otto Sanchez 
CCIE #25592 (Voice) 
Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
  
_
Escucha a quienes ya han probado Windows 7 ¡Hazlo aquí!
http://www.sietesunpueblodeexpertos.com/index_windows7.html___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] RSVP WITH MLPoFR

2010-03-11 Thread Otto Sanchez 
Hi Angel,

You are right, the "ip rsvp bandwidth" has to be configured wherever the
outbound ip interface configuration is, as it will carry the reservation
messages from one rsvp agent to the other, according to the routing protocol
in place. In your case this new ip outbound interface is virtual-template200

HTH,

On Wed, Mar 10, 2010 at 2:06 PM, Angel Perez  wrote:

>  Hello:
>
> I was configurin MLPoFR and LFI on a link between hq and br1, on the serial
> interface I had:
>
> *interface Serial0/2/0.202 point-to-point
>   ip rsvp bandwidth 64 *
>
> Calls where progressing as configured (two g729 calls)
>
> Then after apply *auto qos voip trust fr-atm *new virtual templates and
> virtual access interfaces are created
>
> Then trying to test the policy-map just created and tuned I noticed that I
> could not make calls from hq to br1 (rsvp was rejecting the call)
>
> So I added the following at hq and br1:
>
> *interface Virtual-Template200
>  ip rsvp bandwidth 64*
> **
> And the problem get solved
> **
> Is this the normal situation? I suppose it is but not 100% sure
>
> Thanks
>
>
>
> --
> ¿Te gustaría tener Hotmail en tu móvil Movistar? ¡Es 
> gratis!
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>


-- 
Regards,

Otto Sanchez
CCIE #25592 (Voice)
Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] RSVP WITH MLPoFR

2010-03-10 Thread Angel Perez 

Hello:

 

I was configurin MLPoFR and LFI on a link between hq and br1, on the serial 
interface I had:

 

interface Serial0/2/0.202 point-to-point
  ip rsvp bandwidth 64 

 

Calls where progressing as configured (two g729 calls)

 

Then after apply auto qos voip trust fr-atm new virtual templates and virtual 
access interfaces are created

 

Then trying to test the policy-map just created and tuned I noticed that I 
could not make calls from hq to br1 (rsvp was rejecting the call)

 

So I added the following at hq and br1:

 

interface Virtual-Template200
 ip rsvp bandwidth 64

 

And the problem get solved

 

Is this the normal situation? I suppose it is but not 100% sure

 

Thanks

 

 
  
_
Ahora Messenger en tu Blackberry® 8520 con Movistar por 0 €. ¿A qué esperas?
http://serviciosmoviles.es.msn.com/messenger/blackberry.aspx___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com