Re: [OSL | CCIE_Voice] SNR with Local Route Groups
Thanks for the confirmation Ashok. Date: Tue, 16 Jul 2013 10:25:38 +0800 Subject: Re: [OSL | CCIE_Voice] SNR with Local Route Groups From: ping.as...@gmail.com To: samson_kar...@hotmail.com CC: ccie_voice@onlinestudylist.com It's a bug which you mentioned.https://supportforums.cisco.com/thread/2034658 On Tuesday, 16 July 2013, Samson Kareem wrote: Guys, I'm testing SNR and am seeing some strange behaviour. When I call the users deskphone, the mobile phone only rings if I am not using a standard local route group. When I use a normal route group and reference that via a route list directly on the route pattern, the mobile rings as expected.. The route group and the slrg both have the same MGCP gateway.. Has anyone seen this behaviour before? I have seen CSCtc68651 which looks like it might be the isse but I'm not sure. Thanks Samson -- Ashok Kumar Boinpally. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SNR with Local Route Groups
Guys, I'm testing SNR and am seeing some strange behaviour. When I call the users deskphone, the mobile phone only rings if I am not using a standard local route group. When I use a normal route group and reference that via a route list directly on the route pattern, the mobile rings as expected.. The route group and the slrg both have the same MGCP gateway.. Has anyone seen this behaviour before? I have seen CSCtc68651 which looks like it might be the isse but I'm not sure. Thanks Samson ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNR with Local Route Groups
It's a bug which you mentioned. https://supportforums.cisco.com/thread/2034658 On Tuesday, 16 July 2013, Samson Kareem wrote: Guys, I'm testing SNR and am seeing some strange behaviour. When I call the users deskphone, the mobile phone only rings if I am not using a standard local route group. When I use a normal route group and reference that via a route list directly on the route pattern, the mobile rings as expected.. The route group and the slrg both have the same MGCP gateway.. Has anyone seen this behaviour before? I have seen CSCtc68651 which looks like it might be the isse but I'm not sure. Thanks Samson -- Ashok Kumar Boinpally. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNR with Local Route Groups
It's a bug which you mentioned. https://supportforums.cisco.com/thread/2034658 On Tuesday, 16 July 2013, Samson Kareem wrote: Guys, I'm testing SNR and am seeing some strange behaviour. When I call the users deskphone, the mobile phone only rings if I am not using a standard local route group. When I use a normal route group and reference that via a route list directly on the route pattern, the mobile rings as expected.. The route group and the slrg both have the same MGCP gateway.. Has anyone seen this behaviour before? I have seen CSCtc68651 which looks like it might be the isse but I'm not sure. Thanks Samson -- Ashok Kumar Boinpally. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SNR
I am working on SRN in Lab 5C. I am having issues with Internal Calls ringing my mobile device. I call from CME Site or PSTN. It successfully rings line 2 on PSTN Phone. I call from any phone registered to CUCM and it will not ring my mobile number on the PSTN Phone. I can answer the call on HQ Phone 2 and push the mobility button and successfully transfer the call out and then bring it back. Thoughts? Thanks Stacy ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNR
The call to the mobile phone from the Mobility feature uses the Redirecting CSS at the RDP of the user. None of the internal phones would have access to use that CSS unless ofcourse it is the same CSS assigned to phones, but that wouldn't be a great way to set up SNR. It's best to have dedicated Class of Control. What is the behavior you get when you dial (Call Can't be Completed as Dialed or fast busy)? If you are getting the message about incorrectly dialed number I'd start looking at the Route Patterns, Partitions and Calling Search Spaces associated with the phones in CUCM. If it's fast busy you may have a case where you aren't passing the right digits or plan/type to the PSTN. Standard PSTN debugging should work to help out with that (debug voice diapleer and debug issn q931). Hope this helps! Jason On Sun, Mar 3, 2013 at 8:36 PM, Stacy Vacca stacy.va...@gmail.com wrote: I am working on SRN in Lab 5C. I am having issues with Internal Calls ringing my mobile device. I call from CME Site or PSTN. It successfully rings line 2 on PSTN Phone. I call from any phone registered to CUCM and it will not ring my mobile number on the PSTN Phone. I can answer the call on HQ Phone 2 and push the mobility button and successfully transfer the call out and then bring it back. Thoughts? Thanks Stacy ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SNR
Well I have an update. If I call 5002 from 5001 at HQ it rings PSTN Line 2 Immediately. Call from BR1 Site to 5002 rings the phone. I can answer the phone and transition to and from the PSTN phone line 2. But i can not get the original call to ring the PSTN at all from BR1. Stacy ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SNR with SIP Trunk on CUBE SP
Hi guys, We have an issue of SNR not able to complete the calls to remote destination since the SIP Provider is authenticating on DIDs. The customer's CUCM is connected to our CUBE SP (ASR 1000) and we're connected to our SIP Provider. Example: I call into the phone 4242862304, it has SNR to 13102832382, but call fails to the Remote Destination because in the SIP message it shows my number as the calling party. CUCM 8.6.1 CUBE SP IOS 15.x SIP Provider We have tried setting these options in the SIP Trunk settings of CUCM. Outbound Calls Last Redirect Number (External) check Redirecting Diversion Header Deliver - Outbound I have a TAC case open but they're more confused than I am. I have also attached the debug. Maybe I'm missing some commands on the CUBE SP to allow Diversion Headers? Not sure, I'm new to CUBE SP. -- duy CCIE #27737 Voice INVITE sip:4242862304@10.127.159.241:5060 SIP/2.0Via: SIP/2.0/UDP 10.168.177.69:5060;branch=z9hG4bK5dgjsl300o0guk0dr0j0.1From: NGUYEN,DUYsip:8177143615@10.168.176.135;user=phone;tag=1268067308-1326161889877-To: En Pointe Technologiessip:4242862...@bluip.ecs.enpointe.comCall-ID: BW021809877100112-50676383@10.168.176.135CSeq: 582239531 INVITEContact: sip:8177143615@10.168.177.69:5060;transpor Jan 10 02:18:09.868: %SBC-5-MSG-5406-0605-80242F-1485: The Called-Party-ID has been obtained from the Request-URI. Called-Party-ID: 4242862304 Jan 10 02:18:09.869: %SBC-7-MSG-5001-0740-0B3AC0-3114: A header was not added to the SGM MAL during processing of an inbound SIP message. Header: Content-Disposition Jan 10 02:18:09.869: %SBC-5-MSG-5001-0108-56D003-0960: INVITE Jan 10 02:18:09.870: %SBC-7-MSG-3801-0044-4C8E7E-1737: SIP message sent to 0003 C7A8B145 (port 5060): SIP/2.0 100 TryingCall-ID: BW021809877100112-50676383@10.168.176.135CSeq: 582239531 INVITEFrom: NGUYEN,DUYsip:8177143615@10.168.176.135;user=phone;tag=1268067308-1326161889877-To: En Pointe Technologies sip:4242862...@bluip.ecs.enpointe.com;tag=sip+1+141d000e+2078b0d9Via: SIP/2.0/UDP 10.168.177.69:5060;received=10.168.177.69;branch=z9hG4bK5dgjsl300o0guk0dr0j0.1Server: CISCO-SBC/2.xContent-Length: 0 Jan 10 02:18:09.870: %SBC-5-MSG-1502-0098-7596A3-1360: Interworking Call Control has received a call setup message from a signalling stack Jan 10 02:18:09.870: %SBC-5-MSG-1502-0107-88D47D-1612: Interworking Call Control has sent a call setup ack message to a signalling stack Jan 10 02:18:09.871: %SBC-5-MSG-1502-0155-326D74-1440: SUBDB bypassed Jan 10 02:18:09.871: %SBC-7-MSG-1501-0306-C7EC65-1207: A config set was selected for use in RPS, based upon the configured admin domains (or default config set). If the chosen admin config set is zero, the default config set index is used instead. Selected config set index= 0 Actual config set index = 1 Selected priority= 0XC000 Selected admin domain (NULL if no AD MIB row was chosen) = BLUIP-Incoming Current policy type Jan 10 02:18:09.871: %SBC-7-MSG-1501-0107-E8D8A3-0122: Inbound number analysis begins. SBC Index = 0X0001 Config set Index = 0X0001 Input Called Address Type = 0X0003 Input Called Address = 4242862304 Input Calling Address Type = 0X0003 Input Calling Address = 8177143615 Jan 10 02:18:09.871: %SBC-7-MSG-1501-0108-E8D8A3-0626: Inbound number analysis succeeds. SBC Index = 0X0001 Config set Index = 0X0001 Last analysis table index = Last analysis table comment= Input Source Account = Input Source Adjacency = Input Source Address Type = 0X0003 Input Source Address = 8177143615 Input Called Address Type = 0X0003 Output Called Address Type = 0X0003 Input Called Address = 4242862304 Output Called Address Jan 10 02:18:09.872: %SBC-7-MSG-1501-0306-C7EC65-1207: A config set was selected for use in RPS, based upon the configured admin domains (or default config set). If the chosen admin config set is zero, the default config set index is used instead. Selected config set index= 1 Actual config set index = 1 Selected priority= 0X000A Selected admin domain (NULL if no AD MIB row was chosen) = BLUIP-Incoming Current policy type Jan 10 02:18:09.872: %SBC-7-MSG-1501-0111-7B8E34-0671: Routing begins. SBC Index = 0X0001 Config set Index = 0X0001 Calling Address Type = 0X0003 Called Address Type= 0X0003 Calling Address= 8177143615 Called Address = 4242862304 Jan 10 02:18:09.872: %SBC-7-MSG-1501-0112-7B8E34-0847: Routing succeeds. SBC Index =
Re: [OSL | CCIE_Voice] SNR with SIP Trunk on CUBE SP
First of all, if you have an issue with Redirecting Number, then you can use the SIP Profile to correct the Diversion Header. And if you have an issue with ANI, then you have to set the Calling Party Transformation CSS for Remote Destination Profile. The Remote Destination Profile ignores any Calling Party Translation at Translation Pattern, Route Pattern, Route List, and even the Gateway/Trunk Calling Party Transformation and uses the Internal DN Extension. The only way to deal with Calling Party Translation when the call goes to Remote Destination Number is to use the Calling Party Transformation CSS at the Remote Destination Profile. Hope that helps. On Tue, Jan 10, 2012 at 8:26 PM, ccieid1ot ccieid...@gmail.com wrote: Hi guys, We have an issue of SNR not able to complete the calls to remote destination since the SIP Provider is authenticating on DIDs. The customer's CUCM is connected to our CUBE SP (ASR 1000) and we're connected to our SIP Provider. Example: I call into the phone 4242862304, it has SNR to 13102832382, but call fails to the Remote Destination because in the SIP message it shows my number as the calling party. CUCM 8.6.1 CUBE SP IOS 15.x SIP Provider We have tried setting these options in the SIP Trunk settings of CUCM. Outbound Calls Last Redirect Number (External) check Redirecting Diversion Header Deliver - Outbound I have a TAC case open but they're more confused than I am. I have also attached the debug. Maybe I'm missing some commands on the CUBE SP to allow Diversion Headers? Not sure, I'm new to CUBE SP. -- duy CCIE #27737 Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNR with SIP Trunk on CUBE SP
First of all, if you have an issue with Redirecting Number, then you can use the SIP Profile to correct the Diversion Header. And if you have an issue with ANI, then you have to set the Calling Party Transformation CSS for Remote Destination Profile. The Remote Destination Profile ignores any Calling Party Translation at Translation Pattern, Route Pattern, Route List, and even the Gateway/Trunk Calling Party Transformation and uses the Internal DN Extension. The only way to deal with Calling Party Translation when the call goes to Remote Destination Number is to use the Calling Party Transformation CSS at the Remote Destination Profile. Hope that helps. On Tue, Jan 10, 2012 at 8:26 PM, ccieid1ot ccieid...@gmail.com wrote: Hi guys, We have an issue of SNR not able to complete the calls to remote destination since the SIP Provider is authenticating on DIDs. The customer's CUCM is connected to our CUBE SP (ASR 1000) and we're connected to our SIP Provider. Example: I call into the phone 4242862304, it has SNR to 13102832382, but call fails to the Remote Destination because in the SIP message it shows my number as the calling party. CUCM 8.6.1 CUBE SP IOS 15.x SIP Provider We have tried setting these options in the SIP Trunk settings of CUCM. Outbound Calls Last Redirect Number (External) check Redirecting Diversion Header Deliver - Outbound I have a TAC case open but they're more confused than I am. I have also attached the debug. Maybe I'm missing some commands on the CUBE SP to allow Diversion Headers? Not sure, I'm new to CUBE SP. -- duy CCIE #27737 Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNR remote destination
This mean you didn't enabled the MVA from the Service parameters of the CCM , or your phone is not MVA enabled , please check the config on the CCM side as this is a config error in the CCM not on the GW Ash On Fri, Aug 26, 2011 at 6:33 PM, Ray jonha...@yahoo.com wrote: - Forwarded Message - From: Ray jonha...@yahoo.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Friday, August 26, 2011 10:32 AM Subject: when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR ask me to press 2 to turn on the remote dest or press 3 to turn it off.. it doesnt let me dial any extension.. help SB#sho run Building configuration... Current configuration : 5001 bytes ! ! Last configuration change at 05:10:01 CST Fri Aug 26 2011 ! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011 ! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR1 ! boot-start-marker boot-end-marker ! ! no aaa new-model ! ! ! clock timezone CST -6 clock summer-time CST recurring network-clock-participate wic 2 ! dot11 syslog ip source-route ! ! ip cef ! ip dhcp pool phone network 177.2.11.0 255.255.255.0 default-router 177.2.11.1 option 150 ip 10.11.11.19 ! ! no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! isdn switch-type primary-ni ! ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! voice class h323 1 h225 timeout tcp establish 3 call start slow ! ! ! voice translation-rule 1 rule 1 // // type any unknown plan any isdn ! voice translation-rule 2 rule 1 // // type any subscriber plan any isdn ! voice translation-rule 3 rule 1 // // type any national plan any isdn ! voice translation-rule 4 rule 1 // // type any international plan any isdn ! voice translation-rule 5 rule 1 /.*\(3...\)/ /\1/ ! voice translation-rule 11 rule 1 /^3...$/ /972303/ type any unknown plan any isdn ! voice translation-rule 12 rule 1 /^3...$/ /303/ type any subscriber plan any isdn ! voice translation-rule 13 rule 1 /^3...$/ /972303/ type any national plan any isdn ! voice translation-rule 14 rule 1 /^3...$/ /+1972303/ type any international plan any isdn rule 2 /^4...$/ /+8522404/ type any international plan any isdn ! ! voice translation-profile 911 translate calling 11 translate called 1 ! voice translation-profile INC translate called 5 ! voice translation-profile intl translate calling 14 translate called 4 ! voice translation-profile local translate calling 12 translate called 2 ! voice translation-profile nat translate calling 13 translate called 3 ! ! voice-card 0 ! ! application service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml ! ! ! ! ! ! license udi pid CISCO2811 sn FTX0902D1ZG ! redundancy ! ! controller T1 0/2/0 pri-group timeslots 1-4,24 ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 18.1.1.1 255.255.255.0 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip bind srcaddr 18.1.1.1 ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1/0 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/1 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/2 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/3 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface Serial0/0/0 no ip address encapsulation frame-relay no frame-relay inverse-arp ! ! interface Serial0/0/0.101 point-to-point ip address 177.0.101.2 255.255.255.0 frame-relay interface-dlci 602 ! interface Serial0/0/1 no ip address shutdown clock rate 200 ! ! interface Serial0/2/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn outgoing ie facility isdn outgoing display-ie no cdp enable ! ! interface Vlan1 no ip address ! ! interface Vlan11 ip address 177.2.11.1 255.255.255.0 ip helper-address 10.11.11.19 ! ! interface Vlan12 ip address 177.2.12.1 255.255.255.0 ! ! ! router ospf 1 log-adjacency-changes network 18.1.1.1 0.0.0.0 area 0 network 177.0.101.0 0.0.0.255 area 0 network 177.2.11.0 0.0.0.255 area 0 network 177.2.12.0 0.0.0.255 area 0 ! ip forward-protocol nd no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! control-plane ! ! ! voice-port 0/2/0:23
Re: [OSL | CCIE_Voice] SNR remote destination
yes . i didnt enable MVA in service parameters. From: Ashraf Ayyash ash.ayy...@gmail.com To: Ray jonha...@yahoo.com Cc: ccie voice ccie_voice@onlinestudylist.com Sent: Friday, August 26, 2011 1:01 PM Subject: Re: [OSL | CCIE_Voice] SNR remote destination This mean you didn't enabled the MVA from the Service parameters of the CCM , or your phone is not MVA enabled , please check the config on the CCM side as this is a config error in the CCM not on the GW Ash On Fri, Aug 26, 2011 at 6:33 PM, Ray jonha...@yahoo.com wrote: - Forwarded Message - From: Ray jonha...@yahoo.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Friday, August 26, 2011 10:32 AM Subject: when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR ask me to press 2 to turn on the remote dest or press 3 to turn it off.. it doesnt let me dial any extension.. help SB#sho run Building configuration... Current configuration : 5001 bytes ! ! Last configuration change at 05:10:01 CST Fri Aug 26 2011 ! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011 ! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR1 ! boot-start-marker boot-end-marker ! ! no aaa new-model ! ! ! clock timezone CST -6 clock summer-time CST recurring network-clock-participate wic 2 ! dot11 syslog ip source-route ! ! ip cef ! ip dhcp pool phone network 177.2.11.0 255.255.255.0 default-router 177.2.11.1 option 150 ip 10.11.11.19 ! ! no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! isdn switch-type primary-ni ! ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! voice class h323 1 h225 timeout tcp establish 3 call start slow ! ! ! voice translation-rule 1 rule 1 // // type any unknown plan any isdn ! voice translation-rule 2 rule 1 // // type any subscriber plan any isdn ! voice translation-rule 3 rule 1 // // type any national plan any isdn ! voice translation-rule 4 rule 1 // // type any international plan any isdn ! voice translation-rule 5 rule 1 /.*\(3...\)/ /\1/ ! voice translation-rule 11 rule 1 /^3...$/ /972303/ type any unknown plan any isdn ! voice translation-rule 12 rule 1 /^3...$/ /303/ type any subscriber plan any isdn ! voice translation-rule 13 rule 1 /^3...$/ /972303/ type any national plan any isdn ! voice translation-rule 14 rule 1 /^3...$/ /+1972303/ type any international plan any isdn rule 2 /^4...$/ /+8522404/ type any international plan any isdn ! ! voice translation-profile 911 translate calling 11 translate called 1 ! voice translation-profile INC translate called 5 ! voice translation-profile intl translate calling 14 translate called 4 ! voice translation-profile local translate calling 12 translate called 2 ! voice translation-profile nat translate calling 13 translate called 3 ! ! voice-card 0 ! ! application service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml ! ! ! ! ! ! license udi pid CISCO2811 sn FTX0902D1ZG ! redundancy ! ! controller T1 0/2/0 pri-group timeslots 1-4,24 ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 18.1.1.1 255.255.255.0 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip bind srcaddr 18.1.1.1 ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1/0 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/1 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/2 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/3 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface Serial0/0/0 no ip address encapsulation frame-relay no frame-relay inverse-arp ! ! interface Serial0/0/0.101 point-to-point ip address 177.0.101.2 255.255.255.0 frame-relay interface-dlci 602 ! interface Serial0/0/1 no ip address shutdown clock rate 200 ! ! interface Serial0/2/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn outgoing ie facility isdn outgoing display-ie no cdp enable ! ! interface Vlan1 no ip address ! ! interface Vlan11 ip address 177.2.11.1 255.255.255.0 ip helper-address 10.11.11.19 ! ! interface Vlan12 ip address 177.2.12.1 255.255.255.0 ! ! ! router ospf 1 log-adjacency-changes network 18.1.1.1
Re: [OSL | CCIE_Voice] SNR -- RC
So in those questions, what wording triggers you to use Application Dial Rules? Why can you just make your RD = +14087773434 and make a specific RP =\+1! to go out the specific gw; like Randall has? thanks: Sam On Sun, May 22, 2011 at 11:25 AM, Cristobal Priego cristobalpri...@gmail.com wrote: Did you configure your application dial rule to append a +1 ? Enviado desde mi iPhone El May 21, 2011, a las 21:01, Randall Crumm rrcr...@yahoo.com escribió: HI, Working on SNR I have it configured just like the Proctor guide and when 1002 calls 5002 the mobile phone does not ring. Everything else works correctly. I've had this issue before my RD is 4087773434 RDP rerouting css is css-snr CUCM services is compete match/10 RP= \+!/pt-snr\rl-hq I don't see anything hitting the hq rtr in the q931 debug Any ideas? Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.comwww.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out http://www.PlatinumPlacement.comwww.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNR -- RC
what happen with that is when you call from that line to an internal extension, if your gateway is MGCP it will not invoke the smart shared line and the called phone will display +14087773434 insteaad of the internal extension and this is because the match is made before any prefix is added to the number. and that just wouldn't work 2011/5/23 Sam Park upperlevelpark...@gmail.com So in those questions, what wording triggers you to use Application Dial Rules? Why can you just make your RD = +14087773434 and make a specific RP =\+1! to go out the specific gw; like Randall has? thanks: Sam On Sun, May 22, 2011 at 11:25 AM, Cristobal Priego cristobalpri...@gmail.com wrote: Did you configure your application dial rule to append a +1 ? Enviado desde mi iPhone El May 21, 2011, a las 21:01, Randall Crumm rrcr...@yahoo.com escribió: HI, Working on SNR I have it configured just like the Proctor guide and when 1002 calls 5002 the mobile phone does not ring. Everything else works correctly. I've had this issue before my RD is 4087773434 RDP rerouting css is css-snr CUCM services is compete match/10 RP= \+!/pt-snr\rl-hq I don't see anything hitting the hq rtr in the q931 debug Any ideas? Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.comwww.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out http://www.PlatinumPlacement.comwww.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNR -- RC
If your Remote Destination is 4087773434, your route pattern in css-snr would need to look like that, not \+.!. Unless you are asked for redundancy with your GWs or to use the Application Dial Rules specifically, the easiest way to meet the SNR requirement is a SNR partition with a Route Pattern that will point directly to the local GW for that phone. Also, the complete match service parameter has to do with incoming from PSTN and/or recognizing for MVA, not SNR. I think you were assuming the 10 digit match would allow the route pattern to be used, but that is not the case. Hope this helps, Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Sam Park Sent: Monday, May 23, 2011 7:37 AM To: Cristobal Priego Cc: ccie vo...@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR -- RC So in those questions, what wording triggers you to use Application Dial Rules? Why can you just make your RD = +14087773434 and make a specific RP =\+1! to go out the specific gw; like Randall has? thanks: Sam On Sun, May 22, 2011 at 11:25 AM, Cristobal Priego cristobalpri...@gmail.com wrote: Did you configure your application dial rule to append a +1 ? Enviado desde mi iPhone El May 21, 2011, a las 21:01, Randall Crumm rrcr...@yahoo.com escribió: HI, Working on SNR I have it configured just like the Proctor guide and when 1002 calls 5002 the mobile phone does not ring. Everything else works correctly. I've had this issue before my RD is 4087773434 RDP rerouting css is css-snr CUCM services is compete match/10 RP= \+!/pt-snr\rl-hq I don't see anything hitting the hq rtr in the q931 debug Any ideas? Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNR -- RC
How would that call be sent out to the gateway? Your RD is 408 But your route pattern is \+! Options could be: - Add the + to the RD. - Configure a dialing rule to add the + when area code is 408 - Configure a dialing rule to add 91 when area code is 408 and use one of the already configured patterns. On Sat, May 21, 2011 at 10:01 PM, Randall Crumm rrcr...@yahoo.com wrote: HI, Working on SNR I have it configured just like the Proctor guide and when 1002 calls 5002 the mobile phone does not ring. Everything else works correctly. I've had this issue before my RD is 4087773434 RDP rerouting css is css-snr CUCM services is compete match/10 RP= \+!/pt-snr\rl-hq I don't see anything hitting the hq rtr in the q931 debug Any ideas? Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNR -- RC
Did you configure your application dial rule to append a +1 ? Enviado desde mi iPhone El May 21, 2011, a las 21:01, Randall Crumm rrcr...@yahoo.com escribió: HI, Working on SNR I have it configured just like the Proctor guide and when 1002 calls 5002 the mobile phone does not ring. Everything else works correctly. I've had this issue before my RD is 4087773434 RDP rerouting css is css-snr CUCM services is compete match/10 RP= \+!/pt-snr\rl-hq I don't see anything hitting the hq rtr in the q931 debug Any ideas? Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SNR -- RC
HI, Working on SNR I have it configured just like the Proctor guide and when 1002 calls 5002 the mobile phone does not ring. Everything else works correctly. I've had this issue before my RD is 4087773434 RDP rerouting css is css-snr CUCM services is compete match/10 RP= \+!/pt-snr\rl-hq I don't see anything hitting the hq rtr in the q931 debug Any ideas? Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SNR not showing In use remote
hi exp, I config the SNR, to HQ phone 1. And when i call from Br-1 phone to 5002 (SNR) , and it link to PSTN 212394- However when I pick up PSTN number, on my phone I did not see In use remote does anybody know what i miss ? i use 7962Ge and 7961 phone tks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNR Line status
Well, i turned off the privacy on both device and rdp but still there is no status on the desk phone unless you press the line button when the call is in progress with remote destination, then you see In use remote in the phone display. Thank you for your help though!! --- On Thu, 1/13/11, Roger Källberg roger.kallb...@cygate.se wrote: From: Roger Källberg roger.kallb...@cygate.se Subject: SV: [OSL | CCIE_Voice] SNR Line status To: KatGuru gkr2...@yahoo.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Thursday, January 13, 2011, 5:04 PM You need to turn off privacy on the remote destination profile and possible also on the desk phone. Roger Källberg CCIE #26199 (Voice) Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Från: KatGuru [gkr2...@yahoo.com] Skickat: den 13 januari 2011 06:16 Till: ccie_voice@onlinestudylist.com Ämne: [OSL | CCIE_Voice] SNR Line status Folks, Can we display Remote in use status in the desk phone if the call is answered in the cell phone? assume the desk phone is configured for snr. If so can any one please explain. Any help will be appreciated. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR Line status
Then it is working by designed. On Thu, Jan 13, 2011 at 1:16 PM, KatGuru gkr2...@yahoo.com wrote: Well, i turned off the privacy on both device and rdp but still there is no status on the desk phone unless you press the line button when the call is in progress with remote destination, then you see In use remote in the phone display. Thank you for your help though!! --- On *Thu, 1/13/11, Roger Källberg roger.kallb...@cygate.se* wrote: From: Roger Källberg roger.kallb...@cygate.se Subject: SV: [OSL | CCIE_Voice] SNR Line status To: KatGuru gkr2...@yahoo.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Thursday, January 13, 2011, 5:04 PM You need to turn off privacy on the remote destination profile and possible also on the desk phone. *Roger Källberg* CCIE #26199 (Voice) Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ -- *Från:* KatGuru [gkr2...@yahoo.com] *Skickat:* den 13 januari 2011 06:16 *Till:* ccie_voice@onlinestudylist.com *Ämne:* [OSL | CCIE_Voice] SNR Line status Folks, Can we display Remote in use status in the desk phone if the call is answered in the cell phone? assume the desk phone is configured for snr. If so can any one please explain. Any help will be appreciated. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- duy CCIE #27737 Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR Line status
What type of phone are you using? For the remote in use, this is the correct way for it to work. Does your line turn red when you are using the mobile phone? From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of KatGuru Sent: Thursday, January 13, 2011 11:16 AM To: ccie_voice@onlinestudylist.com; Roger Källberg Subject: Re: [OSL | CCIE_Voice] SNR Line status Well, i turned off the privacy on both device and rdp but still there is no status on the desk phone unless you press the line button when the call is in progress with remote destination, then you see In use remote in the phone display. Thank you for your help though!! --- On Thu, 1/13/11, Roger Källberg roger.kallb...@cygate.se wrote: From: Roger Källberg roger.kallb...@cygate.se Subject: SV: [OSL | CCIE_Voice] SNR Line status To: KatGuru gkr2...@yahoo.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Thursday, January 13, 2011, 5:04 PM You need to turn off privacy on the remote destination profile and possible also on the desk phone. Roger Källberg CCIE #26199 (Voice) Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ _ Från: KatGuru [gkr2...@yahoo.com] Skickat: den 13 januari 2011 06:16 Till: ccie_voice@onlinestudylist.com Ämne: [OSL | CCIE_Voice] SNR Line status Folks, Can we display Remote in use status in the desk phone if the call is answered in the cell phone? assume the desk phone is configured for snr. If so can any one please explain. Any help will be appreciated. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR Line status
desk phone will show remote in use in off hook state only when call is active on mobile. On 1/13/2011 11:16 AM, KatGuru wrote: Well, i turned off the privacy on both device and rdp but still there is no status on the desk phone unless you press the line button when the call is in progress with remote destination, then you see In use remote in the phone display. Thank you for your help though!! --- On *Thu, 1/13/11, Roger Källberg /roger.kallb...@cygate.se/* wrote: From: Roger Källberg roger.kallb...@cygate.se Subject: SV: [OSL | CCIE_Voice] SNR Line status To: KatGuru gkr2...@yahoo.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Thursday, January 13, 2011, 5:04 PM You need to turn off privacy on the remote destination profile and possible also on the desk phone. *Roger Källberg* CCIE #26199 (Voice) Consultant CygateAB Eric Perssons väg 21, SE-217 62 MALMÖ *Från:* KatGuru [gkr2...@yahoo.com] *Skickat:* den 13 januari 2011 06:16 *Till:* ccie_voice@onlinestudylist.com *Ämne:* [OSL | CCIE_Voice] SNR Line status Folks, Can we display Remote in use status in the desk phone if the call is answered in the cell phone? assume the desk phone is configured for snr. If so can any one please explain. Any help will be appreciated. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR Line status
i'm using 7942 and yes the line turns red if there is an active call with remote destination. But the problem is i can not see In use remote until i press the line button. I'm not sure if this is the normal behavior. --- On Fri, 1/14/11, givemeccievoice2...@gmail.com givemeccievoice2...@gmail.com wrote: From: givemeccievoice2...@gmail.com givemeccievoice2...@gmail.com Subject: Re: [OSL | CCIE_Voice] SNR Line status To: ccie_voice@onlinestudylist.com Date: Friday, January 14, 2011, 5:05 AM What type of phone are you using? For the remote in use, this is the correct way for it to work. Does your line turn red when you are using the mobile phone? From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of KatGuru Sent: Thursday, January 13, 2011 11:16 AM To: ccie_voice@onlinestudylist.com; Roger Källberg Subject: Re: [OSL | CCIE_Voice] SNR Line status Well, i turned off the privacy on both device and rdp but still there is no status on the desk phone unless you press the line button when the call is in progress with remote destination, then you see In use remote in the phone display. Thank you for your help though!! --- On Thu, 1/13/11, Roger Källberg roger.kallb...@cygate.se wrote: From: Roger Källberg roger.kallb...@cygate.se Subject: SV: [OSL | CCIE_Voice] SNR Line status To: KatGuru gkr2...@yahoo.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Thursday, January 13, 2011, 5:04 PMYou need to turn off privacy on the remote destination profile and possible also on the desk phone. Roger Källberg CCIE #26199 (Voice) Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Från: KatGuru [gkr2...@yahoo.com] Skickat: den 13 januari 2011 06:16 Till: ccie_voice@onlinestudylist.com Ämne: [OSL | CCIE_Voice] SNR Line statusFolks, Can we display Remote in use status in the desk phone if the call is answered in the cell phone? assume the desk phone is configured for snr. If so can any one please explain. Any help will be appreciated. Thank you. -Inline Attachment Follows- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] SNR Line status
Folks, Can we display Remote in use status in the desk phone if the call is answered in the cell phone? assume the desk phone is configured for snr. If so can any one please explain. Any help will be appreciated. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR Line status
Yes, click on the line of the ip phone and you will see remote-in-use. duy ccie #27737 voice tmobile g2 On Jan 13, 2011 12:25 AM, KatGuru gkr2...@yahoo.com wrote: Folks, Can we display Remote in use status in the desk phone if the call is answered in the cell phone? assume the desk phone is configured for snr. If so can any one please explain. Any help will be appreciated. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR - Remote in Use
Hi All, Can someone please explain to me what I'm doing wrong, when configuring Signal Number Reach I can get everything to work. However when the call is answered on the mobile phone my desk phone's line button is red and the icon does change but it never states In Remote Use. Thanks in advance. Brett DISCLAIMER: This correspondence may contain information which is confidential or proprietary or both. Any dissemination, distribution, copying or use of this communication without prior permission of the sender is strictly prohibited. If you are not the intended recipient you may not disclose, copy or use this information. If you have received this message in error, please contact the sender to discuss its return or destruction. The contents, comments and views contained or expressed within this correspondence do not necessarily reflect those of Redstone, its subsidiaries, affiliates, associates or sister companies and are not intended to create legal relations with the recipient. Redstone may monitor email traffic data and also the content of email for the purposes of security and staff training. If you would like to know more about Redstone Converged Solutions, visit us on the web at www.redstoneconverged.co.uk or contact our Head Office on 0845 20 1. Redstone Converged Solutions Limited Registered in England Wales with Company Number: 02027207 Registered Office: Kirtlington Business Centre, Slade Farm, Kirtlington, Kidlington, Oxfordshire, OX5 3JA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR - Remote in Use
Hi Brett, What about pressing the line button that turned into red manually? I believe that will change the state to Remote in Use. This question been posted before, and ppls claimed this is the expected behavior. Shingei. On Mon, Nov 22, 2010 at 7:41 PM, Jones, Brett brett.jo...@redstone.co.ukwrote: Hi All, Can someone please explain to me what I'm doing wrong, when configuring Signal Number Reach I can get everything to work. However when the call is answered on the mobile phone my desk phone's line button is red and the icon does change but it never states In Remote Use. Thanks in advance. Brett DISCLAIMER: This correspondence may contain information which is confidential or proprietary or both. Any dissemination, distribution, copying or use of this communication without prior permission of the sender is strictly prohibited. If you are not the intended recipient you may not disclose, copy or use this information. If you have received this message in error, please contact the sender to discuss its return or destruction. The contents, comments and views contained or expressed within this correspondence do not necessarily reflect those of Redstone, its subsidiaries, affiliates, associates or sister companies and are not intended to create legal relations with the recipient. Redstone may monitor email traffic data and also the content of email for the purposes of security and staff training. If you would like to know more about Redstone Converged Solutions, visit us on the web at www.redstoneconverged.co.uk or contact our Head Office on 0845 20 1. Redstone Converged Solutions Limited Registered in England Wales with Company Number: 02027207 Registered Office: Kirtlington Business Centre, Slade Farm, Kirtlington, Kidlington, Oxfordshire, OX5 3JA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR - Remote in Use
Check the privacy setting on all devices that share the DN (this includes the remote). Mike -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jones, Brett Sent: Monday, November 22, 2010 3:42 AM To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR - Remote in Use Hi All, Can someone please explain to me what I'm doing wrong, when configuring Signal Number Reach I can get everything to work. However when the call is answered on the mobile phone my desk phone's line button is red and the icon does change but it never states In Remote Use. Thanks in advance. Brett DISCLAIMER: This correspondence may contain information which is confidential or proprietary or both. Any dissemination, distribution, copying or use of this communication without prior permission of the sender is strictly prohibited. If you are not the intended recipient you may not disclose, copy or use this information. If you have received this message in error, please contact the sender to discuss its return or destruction. The contents, comments and views contained or expressed within this correspondence do not necessarily reflect those of Redstone, its subsidiaries, affiliates, associates or sister companies and are not intended to create legal relations with the recipient. Redstone may monitor email traffic data and also the content of email for the purposes of security and staff training. If you would like to know more about Redstone Converged Solutions, visit us on the web at www.redstoneconverged.co.uk or contact our Head Office on 0845 20 1. Redstone Converged Solutions Limited Registered in England Wales with Company Number: 02027207 Registered Office: Kirtlington Business Centre, Slade Farm, Kirtlington, Kidlington, Oxfordshire, OX5 3JA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR - Remote in Use
Brett, Check the CUCM service parameters. Do you have it set to complete or partial match? If partial match, make sure it is less then or equal to the number of digits of the inbound ANI. HTH -Adam On Mon, Nov 22, 2010 at 12:31 PM, Mike Reilly mrei...@ednetics.com wrote: Check the privacy setting on all devices that share the DN (this includes the remote). Mike -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jones, Brett Sent: Monday, November 22, 2010 3:42 AM To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR - Remote in Use Hi All, Can someone please explain to me what I'm doing wrong, when configuring Signal Number Reach I can get everything to work. However when the call is answered on the mobile phone my desk phone's line button is red and the icon does change but it never states In Remote Use. Thanks in advance. Brett DISCLAIMER: This correspondence may contain information which is confidential or proprietary or both. Any dissemination, distribution, copying or use of this communication without prior permission of the sender is strictly prohibited. If you are not the intended recipient you may not disclose, copy or use this information. If you have received this message in error, please contact the sender to discuss its return or destruction. The contents, comments and views contained or expressed within this correspondence do not necessarily reflect those of Redstone, its subsidiaries, affiliates, associates or sister companies and are not intended to create legal relations with the recipient. Redstone may monitor email traffic data and also the content of email for the purposes of security and staff training. If you would like to know more about Redstone Converged Solutions, visit us on the web at www.redstoneconverged.co.uk or contact our Head Office on 0845 20 1. Redstone Converged Solutions Limited Registered in England Wales with Company Number: 02027207 Registered Office: Kirtlington Business Centre, Slade Farm, Kirtlington, Kidlington, Oxfordshire, OX5 3JA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] SNR-In use remote
Hi Experts, I configured SNR in my lab. But when I answer the call from the PSTN phone, I don't see In use Remote on the IP phone. But when I select the line which shows red, by pressing the line button, I do see the In Use Remote written on the phone. I want to know if this is the correct behaviour. Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR-In use remote
Correct behaviour! Ash Unified Communications wrote: Hi Experts, I configured SNR in my lab. But when I answer the call from the PSTN phone, I don't see "In use Remote" on the IP phone. But when I select the line which shows red, by pressing the line button, I do see the "In Use Remote" written on the phone. I want to know if this is the correct behaviour. Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] SNR problem Vol2 lab6
Hi guys, I was working on vol2 lab6 question 3.1, And I cannot get the Mobile number ring on br1 phones or br2 phones as if it's coming from hq ph2, however when I've called from Mobile PSTN to hq phones I can see that the number is from HQ Phone2 (4002). I know that is a problem with the calling party transformation but I can't get it. I'm sure that I've setup the right transformation but I don't know what I'm missing on the other side. Also I'v tried to load the Final config on Proctor to chech and still get the same problem. Also for the localization, when I put the callingPartytransformation css on the phone as described on IP expert book is not working, I have to put the css on the device pool. Any Ideas?? regards NAOUFAL KERBOUTE Consultant Business Developer: Unified Communications Solutions ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR calling party No to PSTN
Hi Sergio, |Thanks for ur reply, I already have these parameter as u mentioned, but still the same result. I'm passing these mobilty call through the LRG , hence using HQ Gw. What else I could do to get this Calling NO to PSTN On Wed, Feb 10, 2010 at 3:54 AM, Sergio Polizer spoli...@hotmail.comwrote: Hi, If you are using calling Party Transformation CSS, try uncheck the Device Pool Calling Party Transformation CSS at Remote Destination Profile. If not, try to create a RP for your Remote Destination number and check Use Calling Party's External Phone Number Mask HTH, Sergio. -- Date: Tue, 9 Feb 2010 00:02:32 +0400 From: kaucc...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SNR calling party No to PSTN Hi Guys, When I dial from 2001 to 2003 (SNR enabled for this extn) . The call goes to PSTN for mobile connect as configured. The calling Party No displayed is 2001 instead of full External NO mask. I had a separate RP partition for Mobility still the same issue . When I make direct call from 2001 or 2003 to PSTN i can see External NO mask. Is this the normal behaviour with SNR. Thanks -- Quer comprar na Internet com segurança? Instale grátis o Internet Explorer 8. http://go.microsoft.com/?linkid=9707132 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR calling party No to PSTN
Hi Guys, Any clues on the query Thanks On Tue, Feb 9, 2010 at 12:02 AM, kavi ten kaucc...@gmail.com wrote: Hi Guys, When I dial from 2001 to 2003 (SNR enabled for this extn) . The call goes to PSTN for mobile connect as configured. The calling Party No displayed is 2001 instead of full External NO mask. I had a separate RP partition for Mobility still the same issue . When I make direct call from 2001 or 2003 to PSTN i can see External NO mask. Is this the normal behaviour with SNR. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR calling party No to PSTN
Hi, If you are using calling Party Transformation CSS, try uncheck the Device Pool Calling Party Transformation CSS at Remote Destination Profile. If not, try to create a RP for your Remote Destination number and check Use Calling Party's External Phone Number Mask HTH, Sergio. Date: Tue, 9 Feb 2010 00:02:32 +0400 From: kaucc...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SNR calling party No to PSTN Hi Guys, When I dial from 2001 to 2003 (SNR enabled for this extn) .The call goes to PSTN for mobile connect as configured.The calling Party No displayed is 2001 instead of full External NO mask. I had a separate RP partition for Mobility still the same issue . When I make direct call from 2001 or 2003 to PSTN i can see External NO mask. Is this the normal behaviour with SNR. Thanks _ Você sabia que o Windows 7 inicia e desliga mais rápido? Clique e conheça mais. http://www.microsoft.com/brasil/windows7/default.html?WT.mc_id=1539___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] SNR calling party No to PSTN
Hi Guys, When I dial from 2001 to 2003 (SNR enabled for this extn) . The call goes to PSTN for mobile connect as configured. The calling Party No displayed is 2001 instead of full External NO mask. I had a separate RP partition for Mobility still the same issue . When I make direct call from 2001 or 2003 to PSTN i can see External NO mask. Is this the normal behaviour with SNR. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR Issue
I will do the lab today and will try again and let you know how it goes but yes I was using LSRG, I'll test with only one gw. thanks for your reply. On Fri, Feb 5, 2010 at 10:24 PM, Otto Sanchez o...@ipexpert.com wrote: Hi Arun, How long does it takes for the call to reach the rd number once you call the 5002 device? There shouldn't be any other delay other than the delay before ringing timer parameter to route the call to the rd number, Since the rerouting css is used to route both calls, the only difference I see here is that you could be using a rp with LRG configuration and the calls might be routed slightly different depending on the origin (whether 1002 calls 5002 or 5002 is sending the call to the rd number), if that's the case, please isolate the problem and configure a different rp with the corresponding rd number within a new partition, and point it to the hq gw or rl containing only hq rg gateways, in consequence change the rerouting css to a new one containing only the new created pt, Also, did you restart the servers?, configured everything from scratch?, etc, Thanks, On Fri, Feb 5, 2010 at 12:37 AM, Arun Kumar arunv...@gmail.com wrote: Hi All, Any clue will be very helpful on this, during lab 5C I made it working but after that its not working anymore every time same issue, please let me know what to check. Thanks Arun On Thu, Feb 4, 2010 at 11:59 PM, Arun Kumar arunv...@gmail.com wrote: Hi All, I run into this SNR issue: wired thing is that I can send calls to Mobile after hitting the mobility softkey and when I call from mobile line to BR1 Ph2 I see caller id as 5002 (HQ Phone 2) and when I hangup on mobile able to pickup from the desk phone but when I call the desk phone my mobile don't rings same time (Delay Before Ringing Timer = 0) every time I need to hit the mobility softkey only any clue to look into this ? Thanks Arun -- Regards, Otto Sanchez CCIE #25592 (Voice) Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR Issue
Hi Arun, How long does it takes for the call to reach the rd number once you call the 5002 device? There shouldn't be any other delay other than the delay before ringing timer parameter to route the call to the rd number, Since the rerouting css is used to route both calls, the only difference I see here is that you could be using a rp with LRG configuration and the calls might be routed slightly different depending on the origin (whether 1002 calls 5002 or 5002 is sending the call to the rd number), if that's the case, please isolate the problem and configure a different rp with the corresponding rd number within a new partition, and point it to the hq gw or rl containing only hq rg gateways, in consequence change the rerouting css to a new one containing only the new created pt, Also, did you restart the servers?, configured everything from scratch?, etc, Thanks, On Fri, Feb 5, 2010 at 12:37 AM, Arun Kumar arunv...@gmail.com wrote: Hi All, Any clue will be very helpful on this, during lab 5C I made it working but after that its not working anymore every time same issue, please let me know what to check. Thanks Arun On Thu, Feb 4, 2010 at 11:59 PM, Arun Kumar arunv...@gmail.com wrote: Hi All, I run into this SNR issue: wired thing is that I can send calls to Mobile after hitting the mobility softkey and when I call from mobile line to BR1 Ph2 I see caller id as 5002 (HQ Phone 2) and when I hangup on mobile able to pickup from the desk phone but when I call the desk phone my mobile don't rings same time (Delay Before Ringing Timer = 0) every time I need to hit the mobility softkey only any clue to look into this ? Thanks Arun -- Regards, Otto Sanchez CCIE #25592 (Voice) Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] SNR and call apperance (LAB 4 Q 3.1)
I am having a little difficulty making inbound calls form pstn line 2 appear as internal call on br1-phn2 phone, outbound call works, when 5002 is called the calls is successfully redirected to pstn line 2, inbound call also works but just does show up as 5002. any thoughts? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR and call apperance (LAB 4 Q 3.1)
Did you try to set the service parameter Matching Caller ID with Remote Destination to Partial match? I think the Callmanager Services must be restarted after changing this parameter. HTH, Omar Von: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von sean hurricane Gesendet: Sonntag, 24. Januar 2010 22:02 An: ccie_voice@onlinestudylist.com Betreff: [OSL | CCIE_Voice] SNR and call apperance (LAB 4 Q 3.1) I am having a little difficulty making inbound calls form pstn line 2 appear as internal call on br1-phn2 phone, outbound call works, when 5002 is called the calls is successfully redirected to pstn line 2, inbound call also works but just does show up as 5002. any thoughts? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR Issues
Hello, When using the local Route Group, the calling phone will use its own route group instead of the route group associated with the rerouting CSS, partition, and pattern of the remote destination profile. So, if I am in Orlando, and you are in Nashville, if I am calling from my Orlando phone, it would use my Orlando gateway. The solution to the problem of the remote destination (which could be seven digits) would be use application dial rules and have everyone input their remote destination as 10 digits. Thanks, James -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie_voice-requ...@onlinestudylist.com Sent: Tuesday, January 19, 2010 6:15 AM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 47, Issue 77 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. SNR Issues (vccie2010) 2. Re: Local Route List question... (kill mill) 3. Recovery of CallManager subscriber 4.2 (asif raza) 4. Re: Vol1 Lab4 - BR2 SIP to UCM phones fails (Otto Sanchez) -- Message: 1 Date: Mon, 18 Jan 2010 22:18:40 -0800 From: vccie2010 vccie2...@gmail.com Subject: [OSL | CCIE_Voice] SNR Issues To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Message-ID: ee04ba001001182218s1a514a97p913aaba6491a2...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Having issue with SNR : 1. I have setup RD for HQ Ph 1 as outside PSTN number, when I make call from HQ ph2 then HQPh1 and it's RD ( PSTN number) rings. But when I call from BR1 or BR2 then only HQ PH1 rings but it's RD does not. Seems like I have Rerouting CSS issueI am using Local Route Group in DP. 2. My second questions can the RD be an internal number or has it to be a PSTN number only. Thanks for your help. -AK -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100118/d3d 4df7c/attachment-0001.htm -- Message: 2 Date: Tue, 19 Jan 2010 01:41:38 -0600 From: kill mill jha...@gmail.com Subject: Re: [OSL | CCIE_Voice] Local Route List question... To: Jonathan Charles jonv...@gmail.com Cc: ccie_voice@onlinestudylist.com, Alex Hannah alex.han...@gmail.com Message-ID: 83281d5a1001182341p25046474j59ee3edb82d15...@mail.gmail.com Content-Type: text/plain; charset=windows-1252 HI appreciate if anyone can point me to the right answer for this. My proposed answer leads to lot of excess RP's thnx On Mon, Jan 18, 2010 at 11:29 PM, kill mill jha...@gmail.com wrote: I am facing the same issue did anyone find a solution. Basically I want HQ user to log in the BR1 site but still be making the same calls like he used to when he was in HQ. Keep in mind HQ Device pool as well as BR Device pool have LRG so what i am seeing is if a pattern matches a LRG the LRG is taking it to the local BR1 GW. If a pattern explicitly pointed to a HQ RL then it would go to the Hq- RL. So to full fill these 2 requirement do i have to create 2 different CSS. One with LRG and one without ? On Mon, Sep 21, 2009 at 7:08 PM, Jonathan Charles jonv...@gmail.comwrote: This is where the + sign kicks in Jonathan On Mon, Sep 21, 2009 at 7:00 PM, Alex Hannah alex.han...@gmail.com wrote: Jonathan, Thanks for your answer... I had one follow up question. With regards to Extension Mobility - If a user in San Jose logs into an IP Phone in NYC, then Device Mobility kicks in and as you stated... sees that the phone is in NYC and applies the NYC device pool to the LRG.., how / what mechanism do you use to ensure the user calls out to the PSTN the same way they did in San Jose... ie if they pick up a phone, they will dial 9.1212XXX instead of just 9.212XXX, because to them that call they make to NYC is still LD since they are used to dialing it that way in San Jose... I guess does that question make sense? Would you just handle it via the Route Patterns if it was MGCP or Dial Peers if it was H.323? ie you would add a pattern matching 91.212XXX and discard predot? If that's the case then you would need to handle their local calling as well since they would be used to dialing local calls in San Jose using 407XX and you would prepend 1 right? How do you handle the dial plan for a user using extension mobility when
[OSL | CCIE_Voice] SNR Issues
Having issue with SNR : 1. I have setup RD for HQ Ph 1 as outside PSTN number, when I make call from HQ ph2 then HQPh1 and it's RD ( PSTN number) rings. But when I call from BR1 or BR2 then only HQ PH1 rings but it's RD does not. Seems like I have Rerouting CSS issueI am using Local Route Group in DP. 2. My second questions can the RD be an internal number or has it to be a PSTN number only. Thanks for your help. -AK ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR, TWO stage dialling
I made sure all my partitions were the same as we have a test lab but it was still call could not be completed. I deleted and rebuilt it as well ??? From: otto.sanc...@daxa.com.ve To: iptuse...@hotmail.co.uk; ccie_voice@onlinestudylist.com Date: Wed, 18 Nov 2009 17:27:46 -0430 Subject: RE: [OSL | CCIE_Voice] SNR, TWO stage dialling Hi, To discard css/pt issues, temporarily configure the mva call destination (an internal extension should be good) in the none partition, Let us know if you still get the same message, BR, Otto From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of iptuser55 Sent: Miércoles, 18 de Noviembre de 2009 04:58 p.m. To: ccie voice Subject: Re: [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve now got it working , I`ve played around and dial in usng teh RDP so only the PIN is required as well as from a non-RDP DN so need to enter in the RDP DN and PIN. I then press 1 to make a call but I hear - The call can not be completed as dialled PBX, PSTN H323 GWIPT I`ve made the MVA Partition the same general Partition for all DN`s and added this to the H323 GW CSS- any ideas, I`ve also rechecked the CSS on the RDRP setting again all dial able. A DN I`m trying to dial - both externally and internally via the MVA is also dial able from other DN`s on the Cluster. It seems to be a CSS, Partition issue but checked everywhere Any idea`s From: o...@ipexpert.com To: aamir.panjw...@ivision.com.au; iptuse...@hotmail.co.uk; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] SNR, TWO stage dialling Date: Tue, 17 Nov 2009 19:32:24 -0430 Also, do you have the “Enable Mobile Voice Access” call manager service parameter set to true?, it’s false by default, It is also very important that your router outgoing voip dialpeer destination pattern matches the mva number and length you defined in the Media Resources- Mobile Voice Access- Mobile Voice Access Directory Number, otherwise your calls will be dropped, -- Regards, Otto Sanchez CCIE #25592 (Voice), CCVP,CCSP,CCNP,CCDA,MCSE. Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Martes, 17 de Noviembre de 2009 04:22 p.m. To: iptuser55; ccie voice Subject: Re: [OSL | CCIE_Voice] SNR, TWO stage dialling I think you are talking about MVA not SNR right.. Make sure appropriate CSS (not rerouting CSS which is used for SNR) on the remote destination profile has been set and can see the partition containing route patterns to dial out. I used to create a dedicated route pattern in a specific partition so that only MVA/SNR calls hit that RP and exit out of the gateway I want instead of pointing to local route group. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of iptuser55 Sent: Wednesday, 18 November 2009 6:06 AM To: ccie voice Subject: [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve set up Two staging and can make a call into CUCM and the VXML answers and I can activate the Mobile access which is working correctly however it does not seem to allow me to dial numbers- any ideas I`ve set up the follwoing dial-peer voice xxx pots incoming called number x direct-inward dia service ccm Dia-peer voice voip session target ipv4:x.x.x.x thanks Use Hotmail to send and receive mail from your different email accounts. Find out how. __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ View your other email accounts from your Hotmail inbox. Add them now. _ Add your Gmail and Yahoo! Mail email accounts into Hotmail - it's easy http://clk.atdmt.com/UKM/go/186394592/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR, TWO stage dialling
Please post your gw confirguration, Thanks, On Fri, Nov 20, 2009 at 5:24 PM, iptuser55 iptuse...@hotmail.co.uk wrote: I made sure all my partitions were the same as we have a test lab but it was still call could not be completed. I deleted and rebuilt it as well ??? -- From: otto.sanc...@daxa.com.ve To: iptuse...@hotmail.co.uk; ccie_voice@onlinestudylist.com Date: Wed, 18 Nov 2009 17:27:46 -0430 Subject: RE: [OSL | CCIE_Voice] SNR, TWO stage dialling Hi, To discard css/pt issues, temporarily configure the mva call destination (an internal extension should be good) in the none partition, Let us know if you still get the same message, BR, Otto *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *iptuser55 *Sent:* Miércoles, 18 de Noviembre de 2009 04:58 p.m. *To:* ccie voice *Subject:* Re: [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve now got it working , I`ve played around and dial in usng teh RDP so only the PIN is required as well as from a non-RDP DN so need to enter in the RDP DN and PIN. I then press 1 to make a call but I hear - The call can not be completed as dialled PBX, PSTN H323 GWIPT I`ve made the MVA Partition the same general Partition for all DN`s and added this to the H323 GW CSS- any ideas, I`ve also rechecked the CSS on the RDRP setting again all dial able. A DN I`m trying to dial - both externally and internally via the MVA is also dial able from other DN`s on the Cluster. It seems to be a CSS, Partition issue but checked everywhere Any idea`s -- From: o...@ipexpert.com To: aamir.panjw...@ivision.com.au; iptuse...@hotmail.co.uk; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] SNR, TWO stage dialling Date: Tue, 17 Nov 2009 19:32:24 -0430 Also, do you have the “Enable Mobile Voice Access” call manager service parameter set to true?, it’s false by default, It is also very important that your router outgoing voip dialpeer destination pattern matches the mva number and length you defined in the Media Resources- Mobile Voice Access- Mobile Voice Access Directory Number, otherwise your calls will be dropped, -- Regards, Otto Sanchez CCIE #25592 (Voice), CCVP,CCSP,CCNP,CCDA,MCSE. Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com http://www.ipexpert.com/ *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Aamir Panjwani *Sent:* Martes, 17 de Noviembre de 2009 04:22 p.m. *To:* iptuser55; ccie voice *Subject:* Re: [OSL | CCIE_Voice] SNR, TWO stage dialling I think you are talking about MVA not SNR right.. Make sure appropriate CSS (not rerouting CSS which is used for SNR) on the remote destination profile has been set and can see the partition containing route patterns to dial out. I used to create a dedicated route pattern in a specific partition so that only MVA/SNR calls hit that RP and exit out of the gateway I want instead of pointing to local route group. *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *iptuser55 *Sent:* Wednesday, 18 November 2009 6:06 AM *To:* ccie voice *Subject:* [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve set up Two staging and can make a call into CUCM and the VXML answers and I can activate the Mobile access which is working correctly however it does not seem to allow me to dial numbers- any ideas I`ve set up the follwoing dial-peer voice xxx pots incoming called number x direct-inward dia service ccm Dia-peer voice voip session target ipv4:x.x.x.x thanks -- Use Hotmail to send and receive mail from your different email accounts. Find out how. http://clk.atdmt.com/UKM/go/186394592/direct/01/ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ -- View your other email accounts from your Hotmail inbox. Add them now.http://clk.atdmt.com/UKM/go/186394592/direct/01/ -- Have more than one Hotmail account? Link them together to easily access both. http://clk.atdmt.com/UKM/go/186394591/direct/01/ ___ For more information regarding industry leading CCIE Lab training, please visit
Re: [OSL | CCIE_Voice] SNR, TWO stage dialling
I¹ve spent 100+ hours on this particular issue and my conclusion is that the CSS applied to the RDP is flaky. If you hear the annunciator when calling an extension using 2 stage dialing from the ³cell phone² then I suggest you try creating a new CSS and assigning it to the RDP rather than using an existing CSS. Weird I know but this has fixed the issue several times for me in the past. However all the things that have been mentioned in this thread are also very much applicable. -- Vik Malhi CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: iptuser55 iptuse...@hotmail.co.uk Date: Fri, 20 Nov 2009 21:54:27 + To: OSL Group ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR, TWO stage dialling I made sure all my partitions were the same as we have a test lab but it was still call could not be completed. I deleted and rebuilt it as well ??? From: otto.sanc...@daxa.com.ve To: iptuse...@hotmail.co.uk; ccie_voice@onlinestudylist.com Date: Wed, 18 Nov 2009 17:27:46 -0430 Subject: RE: [OSL | CCIE_Voice] SNR, TWO stage dialling Hi, To discard css/pt issues, temporarily configure the mva call destination (an internal extension should be good) in the none partition, Let us know if you still get the same message, BR, Otto From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of iptuser55 Sent: Miércoles, 18 de Noviembre de 2009 04:58 p.m. To: ccie voice Subject: Re: [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve now got it working , I`ve played around and dial in usng teh RDP so only the PIN is required as well as from a non-RDP DN so need to enter in the RDP DN and PIN. I then press 1 to make a call but I hear - The call can not be completed as dialled PBX, PSTN H323 GWIPT I`ve made the MVA Partition the same general Partition for all DN`s and added this to the H323 GW CSS- any ideas, I`ve also rechecked the CSS on the RDRP setting again all dial able. A DN I`m trying to dial - both externally and internally via the MVA is also dial able from other DN`s on the Cluster. It seems to be a CSS, Partition issue but checked everywhere Any idea`s From: o...@ipexpert.com To: aamir.panjw...@ivision.com.au; iptuse...@hotmail.co.uk; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] SNR, TWO stage dialling Date: Tue, 17 Nov 2009 19:32:24 -0430 Also, do you have the ³Enable Mobile Voice Access² call manager service parameter set to true?, it¹s false by default, It is also very important that your router outgoing voip dialpeer destination pattern matches the mva number and length you defined in the Media Resources- Mobile Voice Access- Mobile Voice Access Directory Number, otherwise your calls will be dropped, -- Regards, Otto Sanchez CCIE #25592 (Voice), CCVP,CCSP,CCNP,CCDA,MCSE. Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com http://www.ipexpert.com/ From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Martes, 17 de Noviembre de 2009 04:22 p.m. To: iptuser55; ccie voice Subject: Re: [OSL | CCIE_Voice] SNR, TWO stage dialling I think you are talking about MVA not SNR right.. Make sure appropriate CSS (not rerouting CSS which is used for SNR) on the remote destination profile has been set and can see the partition containing route patterns to dial out. I used to create a dedicated route pattern in a specific partition so that only MVA/SNR calls hit that RP and exit out of the gateway I want instead of pointing to local route group. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of iptuser55 Sent: Wednesday, 18 November 2009 6:06 AM To: ccie voice Subject: [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve set up Two staging and can make a call into CUCM and the VXML answers and I can activate the Mobile access which is working correctly however it does not seem to allow me to dial numbers- any ideas I`ve set up the follwoing dial-peer voice xxx pots incoming called number x direct-inward dia service ccm Dia-peer voice voip session target ipv4:x.x.x.x thanks Use Hotmail to send and receive mail from your different email accounts. Find out how. http://clk.atdmt.com/UKM/go/186394592/direct/01/ __ This email has been scanned by the MessageLabs Email Security System. For more information please
Re: [OSL | CCIE_Voice] SNR, TWO stage dialling
i`ve now got it working , I`ve played around and dial in usng teh RDP so only the PIN is required as well as from a non-RDP DN so need to enter in the RDP DN and PIN. I then press 1 to make a call but I hear - The call can not be completed as dialled PBX, PSTN H323 GWIPT I`ve made the MVA Partition the same general Partition for all DN`s and added this to the H323 GW CSS- any ideas, I`ve also rechecked the CSS on the RDRP setting again all dial able. A DN I`m trying to dial - both externally and internally via the MVA is also dial able from other DN`s on the Cluster. It seems to be a CSS, Partition issue but checked everywhere Any idea`s From: o...@ipexpert.com To: aamir.panjw...@ivision.com.au; iptuse...@hotmail.co.uk; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] SNR, TWO stage dialling Date: Tue, 17 Nov 2009 19:32:24 -0430 Also, do you have the “Enable Mobile Voice Access” call manager service parameter set to true?, it’s false by default, It is also very important that your router outgoing voip dialpeer destination pattern matches the mva number and length you defined in the Media Resources- Mobile Voice Access- Mobile Voice Access Directory Number, otherwise your calls will be dropped, -- Regards, Otto Sanchez CCIE #25592 (Voice), CCVP,CCSP,CCNP,CCDA,MCSE. Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Martes, 17 de Noviembre de 2009 04:22 p.m. To: iptuser55; ccie voice Subject: Re: [OSL | CCIE_Voice] SNR, TWO stage dialling I think you are talking about MVA not SNR right.. Make sure appropriate CSS (not rerouting CSS which is used for SNR) on the remote destination profile has been set and can see the partition containing route patterns to dial out. I used to create a dedicated route pattern in a specific partition so that only MVA/SNR calls hit that RP and exit out of the gateway I want instead of pointing to local route group. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of iptuser55 Sent: Wednesday, 18 November 2009 6:06 AM To: ccie voice Subject: [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve set up Two staging and can make a call into CUCM and the VXML answers and I can activate the Mobile access which is working correctly however it does not seem to allow me to dial numbers- any ideas I`ve set up the follwoing dial-peer voice xxx pots incoming called number x direct-inward dia service ccm Dia-peer voice voip session target ipv4:x.x.x.x thanks Use Hotmail to send and receive mail from your different email accounts. Find out how. __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ _ View your other email accounts from your Hotmail inbox. Add them now. http://clk.atdmt.com/UKM/go/186394592/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR, TWO stage dialling
Hi, To discard css/pt issues, temporarily configure the mva call destination (an internal extension should be good) in the none partition, Let us know if you still get the same message, BR, Otto From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of iptuser55 Sent: Miércoles, 18 de Noviembre de 2009 04:58 p.m. To: ccie voice Subject: Re: [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve now got it working , I`ve played around and dial in usng teh RDP so only the PIN is required as well as from a non-RDP DN so need to enter in the RDP DN and PIN. I then press 1 to make a call but I hear - The call can not be completed as dialled PBX, PSTN H323 GWIPT I`ve made the MVA Partition the same general Partition for all DN`s and added this to the H323 GW CSS- any ideas, I`ve also rechecked the CSS on the RDRP setting again all dial able. A DN I`m trying to dial - both externally and internally via the MVA is also dial able from other DN`s on the Cluster. It seems to be a CSS, Partition issue but checked everywhere Any idea`s From: o...@ipexpert.com To: aamir.panjw...@ivision.com.au; iptuse...@hotmail.co.uk; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] SNR, TWO stage dialling Date: Tue, 17 Nov 2009 19:32:24 -0430 Also, do you have the Enable Mobile Voice Access call manager service parameter set to true?, it's false by default, It is also very important that your router outgoing voip dialpeer destination pattern matches the mva number and length you defined in the Media Resources- Mobile Voice Access- Mobile Voice Access Directory Number, otherwise your calls will be dropped, -- Regards, Otto Sanchez CCIE #25592 (Voice), CCVP,CCSP,CCNP,CCDA,MCSE. Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.comhttp://www.ipexpert.com/ From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Martes, 17 de Noviembre de 2009 04:22 p.m. To: iptuser55; ccie voice Subject: Re: [OSL | CCIE_Voice] SNR, TWO stage dialling I think you are talking about MVA not SNR right.. Make sure appropriate CSS (not rerouting CSS which is used for SNR) on the remote destination profile has been set and can see the partition containing route patterns to dial out. I used to create a dedicated route pattern in a specific partition so that only MVA/SNR calls hit that RP and exit out of the gateway I want instead of pointing to local route group. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of iptuser55 Sent: Wednesday, 18 November 2009 6:06 AM To: ccie voice Subject: [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve set up Two staging and can make a call into CUCM and the VXML answers and I can activate the Mobile access which is working correctly however it does not seem to allow me to dial numbers- any ideas I`ve set up the follwoing dial-peer voice xxx pots incoming called number x direct-inward dia service ccm Dia-peer voice voip session target ipv4:x.x.x.x thanks Use Hotmail to send and receive mail from your different email accounts. Find out how.http://clk.atdmt.com/UKM/go/186394592/direct/01/ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ View your other email accounts from your Hotmail inbox. Add them now.http://clk.atdmt.com/UKM/go/186394592/direct/01/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR, TWO stage dialling
I think you are talking about MVA not SNR right.. Make sure appropriate CSS (not rerouting CSS which is used for SNR) on the remote destination profile has been set and can see the partition containing route patterns to dial out. I used to create a dedicated route pattern in a specific partition so that only MVA/SNR calls hit that RP and exit out of the gateway I want instead of pointing to local route group. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of iptuser55 Sent: Wednesday, 18 November 2009 6:06 AM To: ccie voice Subject: [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve set up Two staging and can make a call into CUCM and the VXML answers and I can activate the Mobile access which is working correctly however it does not seem to allow me to dial numbers- any ideas I`ve set up the follwoing dial-peer voice xxx pots incoming called number x direct-inward dia service ccm Dia-peer voice voip session target ipv4:x.x.x.x thanks Use Hotmail to send and receive mail from your different email accounts. Find out how. http://clk.atdmt.com/UKM/go/186394592/direct/01/ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email _ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR, TWO stage dialling
Also, do you have the javascript:getHelp('EnableMobileVoiceAccess') Enable Mobile Voice Access call manager service parameter set to true?, it's false by default, It is also very important that your router outgoing voip dialpeer destination pattern matches the mva number and length you defined in the Media Resources- Mobile Voice Access- Mobile Voice Access Directory Number, otherwise your calls will be dropped, -- Regards, Otto Sanchez CCIE #25592 (Voice), CCVP,CCSP,CCNP,CCDA,MCSE. Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Martes, 17 de Noviembre de 2009 04:22 p.m. To: iptuser55; ccie voice Subject: Re: [OSL | CCIE_Voice] SNR, TWO stage dialling I think you are talking about MVA not SNR right.. Make sure appropriate CSS (not rerouting CSS which is used for SNR) on the remote destination profile has been set and can see the partition containing route patterns to dial out. I used to create a dedicated route pattern in a specific partition so that only MVA/SNR calls hit that RP and exit out of the gateway I want instead of pointing to local route group. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of iptuser55 Sent: Wednesday, 18 November 2009 6:06 AM To: ccie voice Subject: [OSL | CCIE_Voice] SNR, TWO stage dialling i`ve set up Two staging and can make a call into CUCM and the VXML answers and I can activate the Mobile access which is working correctly however it does not seem to allow me to dial numbers- any ideas I`ve set up the follwoing dial-peer voice xxx pots incoming called number x direct-inward dia service ccm Dia-peer voice voip session target ipv4:x.x.x.x thanks _ Use Hotmail to send and receive mail from your different email accounts. Find out http://clk.atdmt.com/UKM/go/186394592/direct/01/ how. __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1
I have configured SNR few times but this time I have got weird problem. Call from any phone to HQ ph2 5002 it rings out to mobile (PSTN line 2) after 2 seconds as per requirement. I can hang up on mobile and can resume the call on HQ ph2 . However, when I click mobility softkey on HQ ph2 and select send call to mobile phone nothing happens at all. Then I press mobility softkey again and this time softkey wouldn't work as well. Doubled checked the config but don't see any problem...has anyone come across this issue before? thanks __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email _ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1
ok finally spending hour on it and going through CCM traces I found it was out of bandwidth issue because I had location set to 48K. However, I can't understand how can this be a bandwidth issue in the following scenario: call from hqph1 5001 to hqph2 5002 it rings on mobile (PSTN line 2) after 2 seconds as per normal. Answer the call at the hqph2, press mobility soft key then select send call to mobile nothing happens. Changed the HQ location bandwidth to 80K and it starts working Now given that gateway, calling number 5001 and called number 5002 are in same HQ location and on top of that I have got a dedicated route pattern just for SNR which routes the call out of hq gateway only then how come location bandwidth is kicking in From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Wednesday, 7 October 2009 8:19 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 I have configured SNR few times but this time I have got weird problem. Call from any phone to HQ ph2 5002 it rings out to mobile (PSTN line 2) after 2 seconds as per requirement. I can hang up on mobile and can resume the call on HQ ph2 . However, when I click mobility softkey on HQ ph2 and select send call to mobile phone nothing happens at all. Then I press mobility softkey again and this time softkey wouldn't work as well. Doubled checked the config but don't see any problem...has anyone come across this issue before? thanks __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email _ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1
Is the location set on the GW? Sent from my phone, apologies for any typos. On Oct 7, 2009, at 6:46 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: ok finally spending hour on it and going through CCM traces I found it was “out of bandwidth” issue because I had location set to 48K. However, I can’t understand how can this be a bandwidth issue i n the following scenario: call from hqph1 5001 to hqph2 5002 it rings on mobile (PSTN line 2) after 2 seconds as per normal. Answer the call at the hqph2, press mobility soft key then select “send call to mobile” nothing happens. Changed the HQ location bandwidth to 80K and it starts work ing Now given that gateway, calling number 5001 and called number 5002 are in same HQ location and on top of that I have got a dedicated route pattern just for SNR which routes the call out of hq gateway only then how come location bandwidth is kicking in From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice- boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Wednesday, 7 October 2009 8:19 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 I have configured SNR few times but this time I have got weird problem. Call from any phone to HQ ph2 5002 it rings out to mobile (PSTN line 2) after 2 seconds as per requirement. I can hang up on mobile and can resume the call on HQ ph2 . However, when I click mobility softkey on HQ ph2 and select “send call to mobile phone” nothing happens at all. Then I press mobility softkey again and this time softkey wouldn’t work as well. Doubled checked the config but don’t see any problem…has anyone come across this issue before? thanks __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1
No, location is only set at the dp level. Calling hq phone, called hq phone and hq gateway are all in same hq dp. From: Mike Thompson [mailto:mthompson...@gmail.com] Sent: Thursday, 8 October 2009 12:45 AM To: Aamir Panjwani Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 Is the location set on the GW? Sent from my phone, apologies for any typos. On Oct 7, 2009, at 6:46 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: ok finally spending hour on it and going through CCM traces I found it was “out of bandwidth” issue because I had location set to 48K. However, I can’t understand how can this be a bandwidth issue in the following scenario: call from hqph1 5001 to hqph2 5002 it rings on mobile (PSTN line 2) after 2 seconds as per normal. Answer the call at the hqph2, press mobility soft key then select “send call to mobile” nothing happens. Changed the HQ location bandwidth to 80K and it starts working Now given that gateway, calling number 5001 and called number 5002 are in same HQ location and on top of that I have got a dedicated route pattern just for SNR which routes the call out of hq gateway only then how come location bandwidth is kicking in From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Wednesday, 7 October 2009 8:19 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 I have configured SNR few times but this time I have got weird problem. Call from any phone to HQ ph2 5002 it rings out to mobile (PSTN line 2) after 2 seconds as per requirement. I can hang up on mobile and can resume the call on HQ ph2 . However, when I click mobility softkey on HQ ph2 and select “send call to mobile phone” nothing happens at all. Then I press mobility softkey again and this time softkey wouldn’t work as well. Doubled checked the config but don’t see any problem…has anyone come across this issue before? thanks __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1
If the call is being routed out of the HQ gateway when loc bw=80k then It does point to a location problem. If it is configured properly then it is for some reason not taking it- no mgp/mgcp on the gateway (assuming it is using mgcp), reset on the gateway page (applies to both mgcp and h323). In failing that- reset the world. I think you will probably have done most if not all of the things above- if so then put the location on the devices. Oh and BTW- also make sure there is no RSVP locations enabled by accident. -- Vik Malhi CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Aamir Panjwani aamir.panjw...@ivision.com.au Date: Thu, 8 Oct 2009 07:52:16 +1100 To: Mike Thompson mthompson...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 No, location is only set at the dp level. Calling hq phone, called hq phone and hq gateway are all in same hq dp. From: Mike Thompson [mailto:mthompson...@gmail.com] Sent: Thursday, 8 October 2009 12:45 AM To: Aamir Panjwani Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 Is the location set on the GW? Sent from my phone, apologies for any typos. On Oct 7, 2009, at 6:46 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: ok finally spending hour on it and going through CCM traces I found it was ³out of bandwidth² issue because I had location set to 48K. However, I can¹t understand how can this be a bandwidth issue in the following scenario: call from hqph1 5001 to hqph2 5002 it rings on mobile (PSTN line 2) after 2 seconds as per normal. Answer the call at the hqph2, press mobility soft key then select ³send call to mobile² nothing happens. Changed the HQ location bandwidth to 80K and it starts working Now given that gateway, calling number 5001 and called number 5002 are in same HQ location and on top of that I have got a dedicated route pattern just for SNR which routes the call out of hq gateway only then how come location bandwidth is kicking in From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Wednesday, 7 October 2009 8:19 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 I have configured SNR few times but this time I have got weird problem. Call from any phone to HQ ph2 5002 it rings out to mobile (PSTN line 2) after 2 seconds as per requirement. I can hang up on mobile and can resume the call on HQ ph2 . However, when I click mobility softkey on HQ ph2 and select ³send call to mobile phone² nothing happens at all. Then I press mobility softkey again and this time softkey wouldn¹t work as well. Doubled checked the config but don¹t see any problemhas anyone come across this issue before? thanks __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com http://www.ipexpert.com __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1
Thanks Vik, I have already tried all your suggestions with no success. Might do the whole lab 4 from scratch on the weekend.. From: Vik Malhi [mailto:vma...@ipexpert.com] Sent: Thursday, 8 October 2009 8:06 AM To: Aamir Panjwani; Mike Thompson Cc: OSL Group Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 If the call is being routed out of the HQ gateway when loc bw=80k then It does point to a location problem. If it is configured properly then it is for some reason not taking it- no mgp/mgcp on the gateway (assuming it is using mgcp), reset on the gateway page (applies to both mgcp and h323). In failing that- reset the world. I think you will probably have done most if not all of the things above- if so then put the location on the devices. Oh and BTW- also make sure there is no RSVP locations enabled by accident. -- Vik Malhi - CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Aamir Panjwani aamir.panjw...@ivision.com.au Date: Thu, 8 Oct 2009 07:52:16 +1100 To: Mike Thompson mthompson...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 No, location is only set at the dp level. Calling hq phone, called hq phone and hq gateway are all in same hq dp. From: Mike Thompson [mailto:mthompson...@gmail.com] Sent: Thursday, 8 October 2009 12:45 AM To: Aamir Panjwani Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 Is the location set on the GW? Sent from my phone, apologies for any typos. On Oct 7, 2009, at 6:46 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: ok finally spending hour on it and going through CCM traces I found it was out of bandwidth issue because I had location set to 48K. However, I can't understand how can this be a bandwidth issue in the following scenario: call from hqph1 5001 to hqph2 5002 it rings on mobile (PSTN line 2) after 2 seconds as per normal. Answer the call at the hqph2, press mobility soft key then select send call to mobile nothing happens. Changed the HQ location bandwidth to 80K and it starts working Now given that gateway, calling number 5001 and called number 5002 are in same HQ location and on top of that I have got a dedicated route pattern just for SNR which routes the call out of hq gateway only then how come location bandwidth is kicking in From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Wednesday, 7 October 2009 8:19 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 I have configured SNR few times but this time I have got weird problem. Call from any phone to HQ ph2 5002 it rings out to mobile (PSTN line 2) after 2 seconds as per requirement. I can hang up on mobile and can resume the call on HQ ph2 . However, when I click mobility softkey on HQ ph2 and select send call to mobile phone nothing happens at all. Then I press mobility softkey again and this time softkey wouldn't work as well. Doubled checked the config but don't see any problem...has anyone come across this issue before? thanks __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com http://www.ipexpert.com __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com __ This email has been scanned by the MessageLabs Email Security
Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1
When you press the mobility softkey and the loc bw = 80k do you see the call leave the HQ gw using deb isdn q931? -- Vik Malhi CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Aamir Panjwani aamir.panjw...@ivision.com.au Date: Thu, 8 Oct 2009 10:39:31 +1100 To: Vik Malhi vma...@ipexpert.com, Mike Thompson mthompson...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 Thanks Vik, I have already tried all your suggestions with no success. Might do the whole lab 4 from scratch on the weekend.. From: Vik Malhi [mailto:vma...@ipexpert.com] Sent: Thursday, 8 October 2009 8:06 AM To: Aamir Panjwani; Mike Thompson Cc: OSL Group Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 If the call is being routed out of the HQ gateway when loc bw=80k then It does point to a location problem. If it is configured properly then it is for some reason not taking it- no mgp/mgcp on the gateway (assuming it is using mgcp), reset on the gateway page (applies to both mgcp and h323). In failing that- reset the world. I think you will probably have done most if not all of the things above- if so then put the location on the devices. Oh and BTW- also make sure there is no RSVP locations enabled by accident. -- Vik Malhi CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Aamir Panjwani aamir.panjw...@ivision.com.au Date: Thu, 8 Oct 2009 07:52:16 +1100 To: Mike Thompson mthompson...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 No, location is only set at the dp level. Calling hq phone, called hq phone and hq gateway are all in same hq dp. From: Mike Thompson [mailto:mthompson...@gmail.com] Sent: Thursday, 8 October 2009 12:45 AM To: Aamir Panjwani Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 Is the location set on the GW? Sent from my phone, apologies for any typos. On Oct 7, 2009, at 6:46 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: ok finally spending hour on it and going through CCM traces I found it was ³out of bandwidth² issue because I had location set to 48K. However, I can¹t understand how can this be a bandwidth issue in the following scenario: call from hqph1 5001 to hqph2 5002 it rings on mobile (PSTN line 2) after 2 seconds as per normal. Answer the call at the hqph2, press mobility soft key then select ³send call to mobile² nothing happens. Changed the HQ location bandwidth to 80K and it starts working Now given that gateway, calling number 5001 and called number 5002 are in same HQ location and on top of that I have got a dedicated route pattern just for SNR which routes the call out of hq gateway only then how come location bandwidth is kicking in From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Wednesday, 7 October 2009 8:19 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 I have configured SNR few times but this time I have got weird problem. Call from any phone to HQ ph2 5002 it rings out to mobile (PSTN line 2) after 2 seconds as per requirement. I can hang up on mobile and can resume the call on HQ ph2 . However, when I click mobility softkey on HQ ph2 and select ³send call to mobile phone² nothing happens at all. Then I press mobility softkey again and this time softkey wouldn¹t work as well. Doubled checked the config but don¹t see any problemhas anyone come across this issue before? thanks __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email
Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1
Correct! I do see the call going out HQ gw when I set the bw to 80k. The weird thing is it rings on mobile phone as per normal if you call from any internal phone, it only doesn't work when you manually try to send call to mobile by selecting mobility softkey and Send call to mobile phone From: Vik Malhi [mailto:vma...@ipexpert.com] Sent: Thursday, 8 October 2009 1:30 PM To: Aamir Panjwani; Mike Thompson Cc: OSL Group Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 When you press the mobility softkey and the loc bw = 80k do you see the call leave the HQ gw using deb isdn q931? -- Vik Malhi - CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Aamir Panjwani aamir.panjw...@ivision.com.au Date: Thu, 8 Oct 2009 10:39:31 +1100 To: Vik Malhi vma...@ipexpert.com, Mike Thompson mthompson...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 Thanks Vik, I have already tried all your suggestions with no success. Might do the whole lab 4 from scratch on the weekend.. From: Vik Malhi [mailto:vma...@ipexpert.com] Sent: Thursday, 8 October 2009 8:06 AM To: Aamir Panjwani; Mike Thompson Cc: OSL Group Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 If the call is being routed out of the HQ gateway when loc bw=80k then It does point to a location problem. If it is configured properly then it is for some reason not taking it- no mgp/mgcp on the gateway (assuming it is using mgcp), reset on the gateway page (applies to both mgcp and h323). In failing that- reset the world. I think you will probably have done most if not all of the things above- if so then put the location on the devices. Oh and BTW- also make sure there is no RSVP locations enabled by accident. -- Vik Malhi - CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Aamir Panjwani aamir.panjw...@ivision.com.au Date: Thu, 8 Oct 2009 07:52:16 +1100 To: Mike Thompson mthompson...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 No, location is only set at the dp level. Calling hq phone, called hq phone and hq gateway are all in same hq dp. From: Mike Thompson [mailto:mthompson...@gmail.com] Sent: Thursday, 8 October 2009 12:45 AM To: Aamir Panjwani Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 Is the location set on the GW? Sent from my phone, apologies for any typos. On Oct 7, 2009, at 6:46 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: ok finally spending hour on it and going through CCM traces I found it was out of bandwidth issue because I had location set to 48K. However, I can't understand how can this be a bandwidth issue in the following scenario: call from hqph1 5001 to hqph2 5002 it rings on mobile (PSTN line 2) after 2 seconds as per normal. Answer the call at the hqph2, press mobility soft key then select send call to mobile nothing happens. Changed the HQ location bandwidth to 80K and it starts working Now given that gateway, calling number 5001 and called number 5002 are in same HQ location and on top of that I have got a dedicated route pattern just for SNR which routes the call out of hq gateway only then how come location bandwidth is kicking in From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Aamir Panjwani Sent: Wednesday, 7 October 2009 8:19 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SNR issue: vol 2 lab 4, 3.1 I have configured SNR few times but this time I have got weird problem. Call from any phone to HQ ph2 5002 it rings out to mobile (PSTN line 2) after 2 seconds as per requirement. I can hang up on mobile and can resume the call on HQ ph2 . However, when I click mobility softkey on HQ ph2 and select send call to mobile phone nothing happens at all. Then I press mobility softkey again and this time softkey wouldn't work as well. Doubled checked the config but don't see any