1. I can confirm that I also don't see type added. I don't seem to be
suffering the side effect of the VM button not working though. I assume
it's not required for that functionality in SRST?
2. I don't have Fallback configured currently, but I believe it auto
populates the E164 as the name. Not sure there's a way to customize that
in traditional SRST? To preserve calls try:
To preserve h323 calls you need to do the following to things:
*
*
*From the gateway:*
voice service voip
h323
call preserve ! Call preserve allows the call to be sustained if
all connectivity to UCM servers is down. SRST.
*
*
*In CUCM:*
Go to CUCM Advanced Service parameters.
Set the *Allow Peer to Preserve H323 Calls*
*
*
3. I think MVA is only supported by scripts native to CUCM. If your
connectivity to CUCM is down, you can't access the MVA service in CUCM.
I'm pretty sure there isn't native support of MVA in the router itself.
It just points to the service in CUCM.
4. These are options I use to manipulate ANI into CUC. There was a good
discussion on this about a month back on this mailer.
*Alternate Extension in CUC*
*
*
On the Unity Connections server, under the users mailbox configuration, you
can set an "alternate extension" This should be set to the ANI (Calling
number) of the phone calling into voicemail when calling through the PSTN.
You can check "debug isdn q931" on the SA router to determine what the
inbound ANI is.*
*
*
*
*Calling Party Transformation Pattern on SA Device Pool*
Preferred method when Alternate Extension is not allowed, because unlike
the masking at the Hunt Pilot this preserves ANI for all other callers.
Create a dedicated Partition and CSS for VM ANI manipulation. Then create
a Calling Party Transformation pattern that strips the ANI of inbound calls
to 4 digits and place it in the previously created Partition. I try to be
as specific as possible here to meet the requirement for voicemail
preservation. That way I'm not overlapping with other things. You can
check "debug isdn q931" on the SA router to determine what the inbound ANI
is. Apply the CSS to the the SA Device Pool at the Calling Party
Transformation CSS field
*Calling Party Transformation Mask on VM Hunt Pilot*
*
*
Easiest to configure, but manipulates all inbound ANI to CUC. If you have
a requirement to playback the calling party ANI it will only list 4 digits.
Under the Hunt Pilot that you setup to reach your voicemail, you can set
the Calling Party Transformation Mask to (This will then only send 4
digits to the Unity system for Calling number no matter where the call
comes in from)
On Mon, Feb 18, 2013 at 11:25 PM, Ramcharan Arya
wrote:
> Hello,
>
> I have couple of issues when site becomes SRST.
>
> 1. One ephone 1 and 2 it does not add phone type automatically. I'm using
> one 7962 and one 7965 phone.
>
> ccm-manager mgcp-fallback
>
> telephony-service
> srst mode auto all
>
> 2. My other site is H.323 gateway and I am using call-manager-fallback
>
> First of all my ie display showing E.164 number when making call to PSTN
>
> 2nd issue I am unable to preserve active call on H.323 gateway also keys
> are not same when phone register to cucm
>
> This site has mobile voice access it does not work. Is there any solution
> to change vxml script to use fall-manager-fallback feature.
>
> 4th issue : When I press message button I am able to reach mailbox using
> alternate ext in Unity. Is there any other approach if I am not allow to
> use alternate ext.
>
>
> Please help me how should I fix these problems.
>
> Thanks & Regards,
> Ramcharan Arya
> CCIE # 28926
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
