Hi All, I'm running through V2L1 on section 4.3. I'm running into an issue that didn't seem to get Vikram. When calling from my Br2 SIP phone back to a CUCM phone I get ring and when I answer it hangs up, but the Br2 SIP phone keeps ringing. In the 4.2 section we had to uncheck the "Wait for Far End H.245 Terminal Capability Set" tick box and that prevented it from happening when the CUBE was involved. In this section the CUBE is not a member of the call but I'm seeing the same symptom. I've included some of the relevant configuration. My IPs are different though. Any ideas?
HQ RTR: gatekeeper zone local UCM cisco.com 192.168.96.10 zone local UCME cisco.com outvia VGK zone local VGK cisco.com zone prefix UCM 1... gw-priority 10 gk-trunk2 zone prefix UCM 1... gw-priority 9 gk-trunk1 zone prefix UCME 3... zone prefix UCM 5... gw-priority 10 gk-trunk2 zone prefix UCM 5... gw-priority 9 gk-trunk1 gw-type-prefix 1#* default-technology no shutdown ! dial-peer voice 1 pots incoming called-number . direct-inward-dial ! dial-peer voice 5000 voip destination-pattern 5... voice-class codec 1 voice-class h323 1 session target ipv4:192.168.100.101 dtmf-relay h245-signal h245-alphanumeric no vad ! dial-peer voice 5001 voip preference 1 destination-pattern 5... voice-class h323 1 session target ipv4:192.168.100.100 dtmf-relay h245-alphanumeric no vad ! dial-peer voice 3000 voip incoming called-number 3... dtmf-relay h245-alphanumeric no vad ! dial-peer voice 3001 voip destination-pattern 3... session target ras dtmf-relay h245-alphanumeric codec g711ulaw no vad Br2 Router: dial-peer voice 5000 voip destination-pattern 5... session target ras dtmf-relay h245-alphanumeric no vad ! dial-peer voice 1000 voip destination-pattern 1... session target ras dtmf-relay h245-alphanumeric no vad Thanks, Jason
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
