Re: [OSL | CCIE_Voice] Long distance calls should include 1 or not ?
When they ask for 10 digits you have to send only the last ten digits. your RP looks good, on your dial-peer you don't need the forward digits command, because 9 and 1 are the only digits which are clearly seen they will be stripped automatically Am Samstag, 29. Dezember 2012 schrieb sanity insanity : hi Guys , For long distance calls I use the following patterns... CUCM :- 91.[2-9]XX[2-9]XX predot strip H323 gateway :- dial-peer voice 10 pots description srst 10 digit LD destination-pattern 91[2-9]..[2-9].. port 0/0/0:23 forward-digits 10 Questions : 1) The requirement is that 10 digits need to be sent to PSTN. Does this require the 1 to be included when sent to pstn or is it just [2-9]..[2-9].. as per NANP? 2) Is my understanding correct . I see some srnds in which the 1 is also sent to PSTN. Regards, MJ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] In cme -srst mode the calls to CUE do not work
I would not use voice class codec as cue only supports g711 better to just set codec to g711 directly. Otherwise if say a remote phone only supports g729 and you have voice class it will not invoke transcode Bill On Dec 28, 2012, at 7:37 PM, Amaia Lesta amaia.le...@gmail.com wrote: Hello Have you configured the CUE to communicate with CME? The following config for SRST allows - - Callers to be redirected to VM of SRST phones - - Users access their own VM - - MWI working - 1 ) CME CONFIG voice class codec 1 codec pref 1 g711u codec pref 2 g729r8 dial-peer voice 2 voip destination-pattern 4900 prefer 0 session protocol sipv2 session target ipv4:CUEIP no vad dtmf-relay sip-notify voice-class codec 1 ip qos dscp cs3 sign ip qos dscp ef media sip-ua mwi-server ipv4:CUEIP expires 3600 port 5060 transport udp unsolicited ip multicast-rout ccm-manager fall ccm-manager music bin loopback 0 telephony-service srst mode auto all ip source RTRVoiceVlanIP max-dn 2 max-ephone 2 multicast moh 239.1.1.1 port 16384 route RTRVoiceVlanIP LoopbackIP moh music-on-hold.au secondary-dialt 9 system message SRST voicemail 4900 mwi relay call-forward pattern .T transfer-sys full-con transfer-pattern .T time-format 24 date-format dd-mm-yy time-zone 5 ephone-dn-template 1 call-forward bus 4900 call-forward noan 4900 timeou 20 huntstop 1 telephony-service srst dn template 1 srst dn line-mode octo - 2) CUE CONFIG ccn subsystem sip default gateway address RTRVoiceVlanIP=CMEIP mwi sip unsolicited end subsystem ccn trigger sip phonenumber 4900 application voicemail enabled maxsessions 2 end trigger ccn application ciscomwiapplication aa description ciscomwiapplication enabled maxsessions 6 script setmwi.aef parameter CallControlGroupID 0 parameter strMWI_OFF_DN 4999 parameter strMWI_ON_DN 4998 end application BR 2012/12/27 ccie_voice-requ...@onlinestudylist.com Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. In cme -srst mode the calls to CUE do not work (sanity insanity) 2. Re: In cme -srst mode the calls to CUE do not work (Chrysostomos Christofi) 3. In cme -srst mode the calls to CUE do not work (Chrysostomos Christofi) 4. Re: BACD Question OWLE Lab 4 Section 9.3. (chase mergenthal) 5. Re: In cme -srst mode the calls to CUE do not work (sanity insanity) -- Message: 1 Date: Thu, 27 Dec 2012 18:15:23 +0530 From: sanity insanity networksanitytoinsan...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] In cme -srst mode the calls to CUE do not work Message-ID: cag4zmyv+m5zmfgyw9oj2xafcwzpdvgqanj34jpndwt1hcxj...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 hi Guys , In the cme -srst mode the calls from my phones in srst to cue fail. In the normal mode ( when) there is no srst the calls to cue work fine. This is my dial-peer to the cue dial-peer voice 4220 voip destination-pattern 4220 session protocol sipv2 session target ipv4: ( ip address of cue) dtmf-relay rtp-nte codec g711ulaw no vad In debug ccsip messages I see the CUE is sending a 404 not found to cme. Any suggestions? Thanks, MJ -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20121227/e10705e9/attachment-0001.html -- Message: 2 Date: Thu, 27 Dec 2012 13:06:06 + From: Chrysostomos Christofi ch.christ...@logicom.net To: sanity insanity networksanitytoinsan...@gmail.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] In cme -srst mode the calls to CUE do not work Message-ID: f3a446ed84ff9449b29f801927620de783f70...@exmbxsrv2.lgcom.net Content-Type: text/plain; charset=iso-8859-7 Hi Can we have the configuration for telephony service? From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of sanity insanity Sent: ??, 27 ?? 2012 2:52 ?? To: ccie_voice@onlinestudylist.com Subject:
Re: [OSL | CCIE_Voice] In cme -srst mode the calls to CUE do
Thanks a lot Bill. You are right. I will change it. 2012/12/29 ccie_voice-requ...@onlinestudylist.com Re: [OSL | CCIE_Voice] In cme -srst mode the calls to CUE do ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUE with CUCM
Thanks All, Do you have a good document -you already used-about this integration On Sat, Dec 29, 2012 at 2:35 AM, Bill Lake whl...@gmail.com wrote: You should be prepared to integrate cue with either CME or CUCM and you should be prepared to do any normal task and some extra ordinary tasks with it. On Fri, Dec 28, 2012 at 4:15 PM, CCIEing aboaz...@gmail.com wrote: Hi All, I want to make sure that the CUE integration with CUCM is included of the LAB exam , right ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUE integration With CUCM
Dear All, I did the configuration of the CUE - CUCM integration, I was able to import the users from cucm, also the CTI Ports are registered with the CUCM, more over I went through the initialization wizard for the CUE, the voice mail pilot, profile already configured and assigned to phones , the CUCM can ping botht the VG and CUE module and visa v. but when I try to call the voice mail pilot, or push the messages button I get this message on the phone Can not reach the number. Any idea. Thanks in advance for your time . Ahmad ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Terminal used for lab is putty or CRT or any other terminal
hi Guys,I am interesting in knowning the following ...1) From the CCIE voice lab which is the terminal connnection used ( putty or crt)?2)Is it ssh or telnet?singhGet Yourself a cool, short @in.com Email ID now! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Terminal used for lab is putty or CRT or any other terminal
hi Guys,I am interesting in knowning the following ...1) From the CCIE voice lab which is the terminal connnection used ( putty or crt)?2)Is it ssh or telnet?singhGet Yourself a cool, short @in.com Email ID now! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUE integration With CUCM
Dear All, It seems it is a compatibility issue, I am using CUCM 8, and based on the CUE 7.X compatibility matrix * http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.htm#CUCM * it is not compatible :(. Thanks All again for your time On Sat, Dec 29, 2012 at 8:03 PM, CCIEing aboaz...@gmail.com wrote: Dear All, I did the configuration of the CUE - CUCM integration, I was able to import the users from cucm, also the CTI Ports are registered with the CUCM, more over I went through the initialization wizard for the CUE, the voice mail pilot, profile already configured and assigned to phones , the CUCM can ping botht the VG and CUE module and visa v. but when I try to call the voice mail pilot, or push the messages button I get this message on the phone Can not reach the number. Any idea. Thanks in advance for your time . Ahmad ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Cisco Unity Connection - VM pilot and VM profile made default but not applied automatically on phones
hi All, I am noticing that for my cisco unity connection integratednbsp; with CUCMnbsp; - the VM pilot and profile that I have made as default VM pilot and profile is not getting automatically applied on my phones and therefore any call forward busy or no answer gets a busy tone. I have to manually update the VM profile on the DN level of the phone to indicate that the default is the unity connection. How do I correct this behaviour so that the phones automatically can get the default VM settings without me having to specify it? -Vir ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Terminal used for lab is putty or CRT or any other terminal
Dears, I hear both could be user Putty, SecureCRT. On Sat, Dec 29, 2012 at 8:24 PM, singh singh8...@in.com wrote: hi Guys, I am interesting in knowning the following ... 1) From the CCIE voice lab which is the terminal connnection used ( putty or crt)? 2)Is it ssh or telnet? -singh Get Yourself a cool, short *@in.com* Email ID now!http://www3.in.com/sso/commonregister.php?ref=INutm_source=inviteutm_medium=outgoing ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Terminal used for lab is putty or CRT or any other terminal
I *think* Voice lab is still using SecureCRT. Does it matter whether it's SSH or Telnet? :-) -- Marko Milivojevic - CCIE #18427 (SP RS) Senior CCIE Instructor - IPexpert On Sat, Dec 29, 2012 at 9:24 AM, singh singh8...@in.com wrote: hi Guys, I am interesting in knowning the following ... 1) From the CCIE voice lab which is the terminal connnection used ( putty or crt)? 2)Is it ssh or telnet? -singh Get Yourself a cool, short @in.com Email ID now! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cisco Unity Connection - VM pilot and VM profile made default but not applied automatically on phones
Hi virajith, You may update all your phone settings using bulk edit. On Sat, Dec 29, 2012 at 8:36 PM, virajith vir...@rediffmail.com wrote: hi All, I am noticing that for my cisco unity connection integrated with CUCM - the VM pilot and profile that I have made as default VM pilot and profile is not getting automatically applied on my phones and therefore any call forward busy or no answer gets a busy tone. I have to manually update the VM profile on the DN level of the phone to indicate that the default is the unity connection. How do I correct this behaviour so that the phones automatically can get the default VM settings without me having to specify it? -Vir http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle? Catch India as it happens with the *Rediff News App*. To download it for FREE, click herehttp://track.rediff.com/click?url=___http://www.rediff.com/newsapp___lnk=signaturenewservice=newsapp ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Terminal used for lab is putty or CRT or any other terminal
Hi, In the voice lab you have to have an SSH client as CUCM will only accept SSH for CLI You could have both types of terminals but be prepared for an old version of both and to have it not be exactly what you practice with. SecureCRT is rumored to be a very old 3--4 version and I am sure PUTTY would be the same. Bill On Sat, Dec 29, 2012 at 11:54 AM, Marko Milivojevic mar...@ipexpert.comwrote: I *think* Voice lab is still using SecureCRT. Does it matter whether it's SSH or Telnet? :-) -- Marko Milivojevic - CCIE #18427 (SP RS) Senior CCIE Instructor - IPexpert On Sat, Dec 29, 2012 at 9:24 AM, singh singh8...@in.com wrote: hi Guys, I am interesting in knowning the following ... 1) From the CCIE voice lab which is the terminal connnection used ( putty or crt)? 2)Is it ssh or telnet? -singh Get Yourself a cool, short @in.com Email ID now! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Terminal used for lab is putty or CRT or any other terminal
I can confirm it is SecureCRT, but an old version without tabs. I training with desktop shortcuts to the device connections which opens in seperate windows. 2012/12/29 Marko Milivojevic mar...@ipexpert.com I *think* Voice lab is still using SecureCRT. Does it matter whether it's SSH or Telnet? :-) -- Marko Milivojevic - CCIE #18427 (SP RS) Senior CCIE Instructor - IPexpert On Sat, Dec 29, 2012 at 9:24 AM, singh singh8...@in.com wrote: hi Guys, I am interesting in knowning the following ... 1) From the CCIE voice lab which is the terminal connnection used ( putty or crt)? 2)Is it ssh or telnet? -singh Get Yourself a cool, short @in.com Email ID now! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cisco Unity Connection - VM pilot and VM profile made default but not applied automatically on phones
Maybe it is a good idea to use just the default profile for all the phones which have CUCN mailbox and only to add a new profile to the users who get a CUE mailbox. 2012/12/29 CCIEing aboaz...@gmail.com Hi virajith, You may update all your phone settings using bulk edit. On Sat, Dec 29, 2012 at 8:36 PM, virajith vir...@rediffmail.com wrote: hi All, I am noticing that for my cisco unity connection integrated with CUCM - the VM pilot and profile that I have made as default VM pilot and profile is not getting automatically applied on my phones and therefore any call forward busy or no answer gets a busy tone. I have to manually update the VM profile on the DN level of the phone to indicate that the default is the unity connection. How do I correct this behaviour so that the phones automatically can get the default VM settings without me having to specify it? -Vir http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle? Catch India as it happens with the *Rediff News App*. To download it for FREE, click herehttp://track.rediff.com/click?url=___http://www.rediff.com/newsapp___lnk=signaturenewservice=newsapp ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Terminal used for lab is putty or CRT or any other terminal
hi Guys,Thanks for your inputs.I generally use command prompt and puttyto access my routersand servers hence I am not sure how different is secure crt from these terminals.Besides thisI see it is a paid software ( secure crt)unlike putty ( which is free) . 1) How different is secure crt from other terminals in operation ( keyboard shortcuts , and other tabs)?2)Do we need to practice with secure crt as wellto prevent problems that may arise during the exam?The expenses involved in studying for ccie program seem to just be going higher and higher by the day : )singh Original message From:Steffen Bruening stbruen...@gmail.com Date: 30 Dec 12 00:05:55Subject: Re: [OSL | CCIEVoice] Terminal used for lab is putty or CRT or any other terminalTo: Marko Milivojevic Cc: ; OSL Voice ; ccievoicerequ...@onlinestudylist.com I can confirm it is SecureCRT, but an old version without tabs. I training with desktop shortcuts to the device connections which opens in seperate windows. 2012 /12/29 Marko MilivojevicI *think* Voice lab is still using SecureCRT. Does it matter whether it's SSH or Telnet? :) Marko Milivojevic CCIE #18427 (SP RS) Senior CCIE Instructor IPexpertOn Sat, Dec 29, 2012 at 9:24 AM, singhwrote: hi Guys, I am interesting in knowning the following ... 1) From the CCIE voice lab which is the terminal connnection used ( putty or crt)? 2)Is it ssh or telnet?singhGet Yourself a cool, short @in.com Email ID now! For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comAre you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comGet Yourself a cool, short @in.com Email ID now! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com