Re: Vaxstation 4000/60 autoboot
Now my system boots automaticaly! Thanks to all! SET BOOT DKA300: #set standard boot device SET BFLG 0 #set R5 to 0 - That`s the missing trick! SET HAPPY = 1 ;-) Marco Am 15.06.2015 um 19:45 schrieb Johnny Billquist: On 2015-06-15 19:04, Marco Rauhut wrote: Hello list! I try to autoboot my Vaxstation 4000/60. The reason is that i want to drive the vax headless. I have set Disk DKA300 as boot hdd in console mode. I SET HALT 2 ( reboot). In this configutarion the system starts into SYSBOOT. There i have to give the command CONTINUE to boot VMS. Is there any way to overide then CONTINUE command? In addition to HALT, you also have BOOT and BFLG. I can't remember which is what right now, but one of them is what R5 gets set to in this case, and you need it to be 0. Johnny
Re: Vaxstation 4000/60 autoboot
On Mon, 15 Jun 2015, Marco Rauhut wrote: In this configutarion the system starts into SYSBOOT. There i have to give the command CONTINUE to boot VMS. Is there any way to overide then CONTINUE command? It sounds like your system defaults to a conversational boot which is, as far as I recall, set by setting the least significant bit in register 5 boot /r5=1 Usually, unless you are booting stand alone backup or are a cluster member, the machine should boot with register 5 set to 0 and you only set it to 1 if you want to do a conversational boot. -- Richard Loken VE6BSV, Unix System Administrator : Anybody can be a father Athabasca University: but you have to earn Athabasca, Alberta Canada : the title of 'daddy' ** richar...@admin.athabascau.ca ** : - Lynn Johnston
Vaxstation 4000/60 autoboot
Hello list! I try to autoboot my Vaxstation 4000/60. The reason is that i want to drive the vax headless. I have set Disk DKA300 as boot hdd in console mode. I SET HALT 2 ( reboot). In this configutarion the system starts into SYSBOOT. There i have to give the command CONTINUE to boot VMS. Is there any way to overide then CONTINUE command? Marco * Deutsch - erkannt * Englisch * Deutsch * Englisch * Deutsch javascript:void(0);#
Re: Vaxstation 4000/60 autoboot
If you mean boot directly so that you don't have to CONTINUE: From the prompt set boot_osflags 0,0 boot/1 DKA300: Let me know if that does not work, recalling from memory... Bill On Mon, Jun 15, 2015 at 1:04 PM, Marco Rauhut ma...@familie-rauhut.eu wrote: Hello list! I try to autoboot my Vaxstation 4000/60. The reason is that i want to drive the vax headless. I have set Disk DKA300 as boot hdd in console mode. I SET HALT 2 ( reboot). In this configutarion the system starts into SYSBOOT. There i have to give the command CONTINUE to boot VMS. Is there any way to overide then CONTINUE command? Marco * Deutsch - erkannt * Englisch * Deutsch * Englisch * Deutsch javascript:void(0);#
