Hi, I have two 6500 in a LAN connected at layer 2. Each of them have a SVI with an IP and HSRP working without problems. When I configure "Fallback Bridging" in the SVI in both switches, HSRP stop working, so I think the problem can be related to a segmented L2 network topology.
I found the following link: http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00800a7af6.shtml The questions is: How can I check the STP state of the ports connecting to the MSFC? The configuration in both switches is like the following: interface VlanXX ip address X.X.X.X 255.255.255.0 standby 28 ip X.X.X.Y bridge-group 1 bridge 1 protocol vlan-bridge bridge 1 priority 20000 Best regards. -- Daniel _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/