Hi Mike, Would this work for you?
bridge-domain X interface A service instance 1 ethernet encapsulation dot1q 131 rewrite ingress tag pop 1 symmetric bridge-domain X interface B service instance 1 ethernet encapsulation dot1q 313 second-dot1q 10 rewrite ingress tag pop 2 symmetric bridge-domain X Hope this helps. Regards, ShaoYi Tan On 21/4/20, 3:51 AM, "cisco-nsp on behalf of Mike" <cisco-nsp-boun...@puck.nether.net on behalf of mike+li...@yourtownonline.com> wrote: Hello, I have an ASR920 and I am trying to translate input dog1q tag '131' to dual-tagged '313,10'. My intention is to the bridge this over to another port that expects these frames on 313,10. But when I try configuring the translation, I get the following: Router(config)#interface gi0/0/0 Router(config-if)#service instance 1 ethernet Router(config-if-srv)#encapsulation dot1q 131 Router(config-if-srv)#rewrite ingress tag translate 1-to-2 dot1q 313 second-dot1q 10 symmetric 1_TO_2 not supported on EFP This rewrite ingress on ServInst 1(Gi0/0/0) is not allowed by platform or other components. Can anyone tell me how to get this done or is this just not possible on asr920? _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/