I do some vlan rewrites/aggregation at a POP with the configuration below.
Everything works as expected.
However, it would be nice to see which mac addresses which are mapped to each
vlan. My understanding is that the vlan is popped at incoming traffic and added
to outgoing traffic. It is possible to show the mapping table within IOS-XR?
interface TenGigE0/1/0/0.22001 l2transport
encapsulation dot1q 100-399 exact
rewrite ingress tag pop 1 symmetric
Thanks
Lars Eidsheim | INTELLIT
This email has been scanned and secured by Intellit
This communication is for use by the intended recipient and contains
information that may be privileged, confidential and exempt from disclosure or
copyrighted under applicable law. If you are not the intended recipient, you
are hereby formally notified that any dissemination, use, copying or
distribution of this e-mail, in whole or in part, is strictly prohibited.
Please notify the sender by return e-mail and delete this e-mail from your
system.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/