Can anyone tell me where the temp sensors on a WS-X6148-GE-TX board are physically located ?
This is part of the env info : module 2 outlet temperature: 27C module 2 inlet temperature: 24C module 2 device-1 temperature: 25C module 2 device-2 temperature: 27C module 3 outlet temperature: 27C module 3 inlet temperature: 25C module 3 device-1 temperature: 25C module 3 device-2 temperature: 30C module 4 outlet temperature: 27C module 4 inlet temperature: 25C module 4 device-1 temperature: 25C module 4 device-2 temperature: 28C Module 2-4 are the same modules and all temp seem to be within limits but module 3 device-2 temp is rather high compared to the other temperatures. Can anyone tell me where this sensor is physical located on the board ? Front ? Back ? Left ? Right ? I also have a question about the fans : there is a command to show the fan status but what is the output if one of the fans fails ? Does it signal single fan failure or only full-fan failure ? Greetings, Wim Holemans Network Services University of Antwerp _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/