Re: [cisco-voip] DS3 voice delivery?

[Nick Barnett]

Thank you everybody. The mux jumped into maintenance mode for some reason.
We were able to find a 20 year old manual that had DB9 ->RJ45 pinouts... I
cut the end off a blue cisco console cable and rewired the end. Then we
could session into the device and set it back into service. We're up for
now, hopefully it doesn't decide it needs to be in maintenance mode for
another 15 years :)

On Wed, Jun 8, 2016 at 8:51 AM, Nick Barnett  wrote:

> So, we have an old MUX that died. We have to either replace the MUX or use
> something else. Is it possible to use a DS3 SM on an ISR to terminate the
> DS3? Right now, we have a DS3 that hits a mux and breaks out to 28 PRIs...
> those PRIs go into a plethora of VWIC interfaces on a SIP router. Would it
> be possible to get another module for this router that lets us plug the
> coax in and skip all of this VWIC/MUX business?
>
> Thanks,
> Nick
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] DS3 voice delivery?

[Rob Dawson]

You can still attach service to an AS5400 through January, 2016. Pick up a 
reman and load it with 5 years of smartnet. We never had issues with our 5300s, 
rock solid.

Sent from my iPhone

> On Jun 8, 2016, at 1:29 PM, Doug McIntyre <mer...@geeks.org> wrote:
> 
> No, the NM-1T3/E3 is a data only part, packet over T3. 
> 
> Cisco did used to have a product, the VGD-1T3 that did just that,
> which looked like it was mostly a rebranded AS5200 with the T3 interface
> and pushed to voice instead of modems. But it is discontinued, probably
> because they only sold a handful. 
> 
> The M13 MUX to VWIC card solution is probably the best solution still.
> 
> 
>> On Wed, Jun 08, 2016 at 12:45:09PM -0400, Lelio Fulgenzi wrote:
>> There's this... 
>> 
>> http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/2600-3600-3700-series-t3-e3-network-module/product_data_sheet09186a008010fba2.html
>>  
>> 
>> But in CUCM v9.1, I don't see it as a pull down option in a 3900 series 
>> gateway configuration. 
>> 
>> So, not sure it's supported for voice. 
>> 
>> --- 
>> Lelio Fulgenzi, B.A. 
>> Senior Analyst, Network Infrastructure 
>> Computing and Communications Services (CCS) 
>> University of Guelph 
>> 
>> 519‐824‐4120 Ext 56354 
>> le...@uoguelph.ca 
>> www.uoguelph.ca/ccs 
>> Room 037, Animal Science and Nutrition Building 
>> Guelph, Ontario, N1G 2W1 
>> 
>> - Original Message -----
>> 
>> From: "Nick Barnett" <nicksbarn...@gmail.com> 
>> To: "Cisco VoIP Group" <cisco-voip@puck.nether.net> 
>> Sent: Wednesday, June 8, 2016 9:51:15 AM 
>> Subject: [cisco-voip] DS3 voice delivery? 
>> 
>> So, we have an old MUX that died. We have to either replace the MUX or use 
>> something else. Is it possible to use a DS3 SM on an ISR to terminate the 
>> DS3? Right now, we have a DS3 that hits a mux and breaks out to 28 PRIs... 
>> those PRIs go into a plethora of VWIC interfaces on a SIP router. Would it 
>> be possible to get another module for this router that lets us plug the coax 
>> in and skip all of this VWIC/MUX business? 
>> 
>> Thanks, 
>> Nick 
>> 
>> ___ 
>> cisco-voip mailing list 
>> cisco-voip@puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
>> ___
>> cisco-voip mailing list
>> cisco-voip@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


smime.p7s
Description: S/MIME cryptographic signature
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] DS3 voice delivery?

[Doug McIntyre]

No, the NM-1T3/E3 is a data only part, packet over T3. 

Cisco did used to have a product, the VGD-1T3 that did just that,
which looked like it was mostly a rebranded AS5200 with the T3 interface
and pushed to voice instead of modems. But it is discontinued, probably
because they only sold a handful. 

The M13 MUX to VWIC card solution is probably the best solution still.


On Wed, Jun 08, 2016 at 12:45:09PM -0400, Lelio Fulgenzi wrote:
> There's this... 
> 
> http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/2600-3600-3700-series-t3-e3-network-module/product_data_sheet09186a008010fba2.html
>  
> 
> But in CUCM v9.1, I don't see it as a pull down option in a 3900 series 
> gateway configuration. 
> 
> So, not sure it's supported for voice. 
> 
> --- 
> Lelio Fulgenzi, B.A. 
> Senior Analyst, Network Infrastructure 
> Computing and Communications Services (CCS) 
> University of Guelph 
> 
> 519‐824‐4120 Ext 56354 
> le...@uoguelph.ca 
> www.uoguelph.ca/ccs 
> Room 037, Animal Science and Nutrition Building 
> Guelph, Ontario, N1G 2W1 
> 
> - Original Message -
> 
> From: "Nick Barnett" <nicksbarn...@gmail.com> 
> To: "Cisco VoIP Group" <cisco-voip@puck.nether.net> 
> Sent: Wednesday, June 8, 2016 9:51:15 AM 
> Subject: [cisco-voip] DS3 voice delivery? 
> 
> So, we have an old MUX that died. We have to either replace the MUX or use 
> something else. Is it possible to use a DS3 SM on an ISR to terminate the 
> DS3? Right now, we have a DS3 that hits a mux and breaks out to 28 PRIs... 
> those PRIs go into a plethora of VWIC interfaces on a SIP router. Would it be 
> possible to get another module for this router that lets us plug the coax in 
> and skip all of this VWIC/MUX business? 
> 
> Thanks, 
> Nick 
> 
> ___ 
> cisco-voip mailing list 
> cisco-voip@puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-voip 
> 

> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] DS3 voice delivery?

[Lelio Fulgenzi]

There's this... 

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/2600-3600-3700-series-t3-e3-network-module/product_data_sheet09186a008010fba2.html
 

But in CUCM v9.1, I don't see it as a pull down option in a 3900 series gateway 
configuration. 

So, not sure it's supported for voice. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
le...@uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

- Original Message -

From: "Nick Barnett" <nicksbarn...@gmail.com> 
To: "Cisco VoIP Group" <cisco-voip@puck.nether.net> 
Sent: Wednesday, June 8, 2016 9:51:15 AM 
Subject: [cisco-voip] DS3 voice delivery? 

So, we have an old MUX that died. We have to either replace the MUX or use 
something else. Is it possible to use a DS3 SM on an ISR to terminate the DS3? 
Right now, we have a DS3 that hits a mux and breaks out to 28 PRIs... those 
PRIs go into a plethora of VWIC interfaces on a SIP router. Would it be 
possible to get another module for this router that lets us plug the coax in 
and skip all of this VWIC/MUX business? 

Thanks, 
Nick 

___ 
cisco-voip mailing list 
cisco-voip@puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] DS3 voice delivery?

[Rob Dawson]

At a previous employer we used AS5300s with DS3 interfaces as the PRI gateways 
for our Broadworks platform, straight from TDM to SIP. I am not sure what the 
modern analogue to that solution would be but I don’t believe you will find a 
DS3 card for an ISR device that supports voice.

Rob

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Nick 
Barnett
Sent: Wednesday, June 08, 2016 9:51 AM
To: Cisco VoIP Group <cisco-voip@puck.nether.net>
Subject: [cisco-voip] DS3 voice delivery?

So, we have an old MUX that died. We have to either replace the MUX or use 
something else. Is it possible to use a DS3 SM on an ISR to terminate the DS3? 
Right now, we have a DS3 that hits a mux and breaks out to 28 PRIs... those 
PRIs go into a plethora of VWIC interfaces on a SIP router. Would it be 
possible to get another module for this router that lets us plug the coax in 
and skip all of this VWIC/MUX business?

Thanks,
Nick
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] DS3 voice delivery?

[Nick Barnett]

So, we have an old MUX that died. We have to either replace the MUX or use
something else. Is it possible to use a DS3 SM on an ISR to terminate the
DS3? Right now, we have a DS3 that hits a mux and breaks out to 28 PRIs...
those PRIs go into a plethora of VWIC interfaces on a SIP router. Would it
be possible to get another module for this router that lets us plug the
coax in and skip all of this VWIC/MUX business?

Thanks,
Nick
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip