If the paging controller is taking the ATA off-hook as soon as you plug it in,
then it sounds to me like the interface on the paging controller is the wrong
kind of interface (perhaps needs to be configured).
Disconnect supervision issues would show up *after* making an announcement, but
you are not even making it that far.
-mn
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Cannizzaro, Vince
Sent: July-22-16 11:37 AM
To: 'cisco-voip@puck.nether.net' <cisco-voip@puck.nether.net>
Subject: [cisco-voip] Supervisory Disconnect on ATA 190
Hi everyone,
I'm trying to connect an ATA 190 to a Logison Paging Module a vendor installed
to get paging functionality at a site. The vendor has stated the following:
"Upon dialing the specific extension assigned to paging, this line is "live"
(i.e. answers the line A.K.A. Auto Answer) to complete the connection to the
Logison NCP and enables the page to be broadcast on all the Logison Speakers
you have assigned to that specific paging zone. The line must also be
programmed with Supervisor Disconnect (this ensures that the page is
disconnected once the user has stopped talking and hangs up)."
As it stands, as soon as I plug in the analog line into the ATA you can hear
dial tone over the speakers and then eventually times out.
I can't see where to configure supervisory disconnect on an ATA 190. I can't
use a router FXS port as the router is in another network closet.
Am I missing something?
Thank you,
Vince
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
