Re: [Clamav-users] Problem downloading 0.95.3 from website
Hi there -- I bring up a web browser, firefox or konqueror, and connect to the www.clamav.com website. Once I am there, I click on the lastest ClamAV release hyperlink, and on the next page I click on the ClamAV 0.95.3 link located under the Production Quality Releases section. When I am prompted, I click on the save file option, and I specify the location on the local system. The download commences, but then fails just as it reaches the 100 percent mark. The error message that I see is the following: clamav-0.95.3.tar.gz.part could not be saved, because the source file could not be read. Any thoughts? -Original Message- From: clamav-users-boun...@lists.clamav.net [mailto:clamav-users-boun...@lists.clamav.net] On Behalf Of Jerry Sent: Wednesday, December 30, 2009 6:47 AM To: clamav-users@lists.clamav.net Subject: Re: [Clamav-users] Problem downloading 0.95.3 from website On Tue, 29 Dec 2009 17:14:20 -0500 Andrew H. Kaplan ahkap...@partners.org articulated: I don't know if this issue has already been posted, my apologies for repeating if it has, but I am unable to download the .gz file from the clamav website. Whenever I try to do so, the download appears to complete but I then get an error message indicating an inability to read the source file. Works for me. Could you describe your download procedure? This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. If you are not the intended recipient of this transmission, please delete it immediately. Obviously, I am the idiot who sent it to you by mistake. Furthermore, there is no way I can force you to delete it. Worse, by the time you have reached this disclaimer you have all ready read the document. Telling you to forget it would seem absurd. In any event, I have no legal right to force you to take any action upon this email anyway. This entire disclaimer is just a waste of everyone's time and bandwidth. Therefore, let us just forget the whole thing and enjoy a cold beer instead. -- Jerry ges...@yahoo.com |=== |=== |=== |=== | ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
[Clamav-users] FW: Problem downloading 0.95.3 from website
-Original Message- From: Kaplan, Andrew H. Sent: Wednesday, December 30, 2009 1:08 PM To: 'chupacerv...@gmail.com' Subject: RE: [Clamav-users] Problem downloading 0.95.3 from website Hi there -- I have, and that file is zero bytes in size. Following a suggestion that was posted, I am trying to retrieve the file from a terminal window using the wget command. As I am posting this message, the download is repeatedly failing with a connection reset by peer message appearing on-screen. -Original Message- From: Robert Wyatt [mailto:chupacerv...@gmail.com] Sent: Wednesday, December 30, 2009 1:00 PM To: ClamAV users ML Cc: Kaplan, Andrew H. Subject: Re: [Clamav-users] Problem downloading 0.95.3 from website Hmmm, well the ...part file is not the one you want. You want the identical file without the .part suffix on it (that would be the whole file). Have you checked to see whether it is present? Kaplan, Andrew H. wrote: Hi there -- I bring up a web browser, firefox or konqueror, and connect to the www.clamav.com website. Once I am there, I click on the lastest ClamAV release hyperlink, and on the next page I click on the ClamAV 0.95.3 link located under the Production Quality Releases section. When I am prompted, I click on the save file option, and I specify the location on the local system. The download commences, but then fails just as it reaches the 100 percent mark. The error message that I see is the following: clamav-0.95.3.tar.gz.part could not be saved, because the source file could not be read. Any thoughts? -Original Message- From: clamav-users-boun...@lists.clamav.net [mailto:clamav-users-boun...@lists.clamav.net] On Behalf Of Jerry Sent: Wednesday, December 30, 2009 6:47 AM To: clamav-users@lists.clamav.net Subject: Re: [Clamav-users] Problem downloading 0.95.3 from website On Tue, 29 Dec 2009 17:14:20 -0500 Andrew H. Kaplanahkap...@partners.org articulated: I don't know if this issue has already been posted, my apologies for repeating if it has, but I am unable to download the .gz file from the clamav website. Whenever I try to do so, the download appears to complete but I then get an error message indicating an inability to read the source file. Works for me. Could you describe your download procedure? This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. If you are not the intended recipient of this transmission, please delete it immediately. Obviously, I am the idiot who sent it to you by mistake. Furthermore, there is no way I can force you to delete it. Worse, by the time you have reached this disclaimer you have all ready read the document. Telling you to forget it would seem absurd. In any event, I have no legal right to force you to take any action upon this email anyway. This entire disclaimer is just a waste of everyone's time and bandwidth. Therefore, let us just forget the whole thing and enjoy a cold beer instead. -- Jerry ges...@yahoo.com |=== |=== |=== |=== | ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
[Clamav-users] Problem downloading 0.95.3 from website
Hi there -- I don't know if this issue has already been posted, my apologies for repeating if it has, but I am unable to download the .gz file from the clamav website. Whenever I try to do so, the download appears to complete but I then get an error message indicating an inability to read the source file. Any ideas? Thanks. The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] opensuse11.1 loses network connection duringa cronjob that utilizes freshclam and clamscan
Hi there -- I reconfigured the network cards on the server in question so that one is disabled, and the other is set to autonegotiate. Additionally, I updated the BIOS for the motherboard and the NIC on the server. Even with these new configurations, the problem where the server lost its connection to the network still occurred. I manually ran the script that is the scheduled cron job, and I was able to track when the network connection was lost. The disconnect occurred about five minutes into the anti-virus scan. Attached to this e-mail is the script that is run as well as the output summary text file. Just as a recap, the server in question is running openSuSE 11.1 which was updated from the openSuSE 10.3 version. The version of ClamAV is the 0.94.2 release that was compiled and installed from source. One thought came to mind: Would the removal of the source version of ClamAV and then having it replaced by the one that comes bundled with openSuSE be a solution to this issue? -Original Message- From: clamav-users-boun...@lists.clamav.net [mailto:clamav-users-boun...@lists.clamav.net] On Behalf Of Chuck Swiger Sent: Wednesday, January 07, 2009 1:05 PM To: ClamAV users ML Subject: Re: [Clamav-users] opensuse11.1 loses network connection duringa cronjob that utilizes freshclam and clamscan On Jan 7, 2009, at 8:03 AM, Kaplan, Andrew H. wrote: One of our servers had opensuse 11.1 installed as an upgrade from opensuse 10.3 on Monday of this week, and has lost its network connection twice in as many days. The network cards on the server, of which one is currently in use and the other is up with the same ip address but not currently connected to the network, are the NetXtreme BCM5722 gigabit ethernet PCI express model. The cards are configured to run at 100Mbps Full Duplex with Autonegotiation turned off. Losing your net connection is unlikely to have anything to do with ClamAV. Barring unusual circumstances (setting up a bridge or some kind of link aggregation or trunking like Cisco's FEC or CARP), you should not configure two NICs with the the same IP. Barring unusual circumstances, such as connecting to a defective switch, you should never need to disable ethernet autonegotiation. This said, there are some other reasons which might cause the link to fail; some platforms have an integrated remote management platform layered on top of a normal NIC, which can interfere with ARP and normal operation of the interface-- usually a BIOS firmware update or adjusting the BIOS to disable the management stuff helps. Regards, -- -Chuck ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail. /home/ahk/clamav-0.94.2/test/.split/split.clam.arjaa: Input/Output error /sys/devices/platform/vesafb.0/graphics/fb0/bl_curve: Input/Output error /sys/devices/pci:00/:00:04.0/:05:00.0/resource0: Input/Output error /sys/devices/pci:00/:00:04.0/:05:00.0/resource1: Input/Output error /sys/devices/pci:00/:00:04.0/:05:00.0/resource3: Input/Output error /sys/devices/pci:00/:00:04.0/:05:00.0/rom: Input/Output error /sys/devices/pci:00/:00:04.0/:05:00.0/host0/port-0:0/end_device-0:0/sas_device/end_device-0:0/enclosure_identifier: Input/Output error /sys/devices/pci:00/:00:04.0/:05:00.0/host0/port-0:0/end_device-0:0/sas_device/end_device-0:0/bay_identifier: Input/Output error /sys/devices/pci:00/:00:04.0/:05:00.0/host0/port-0:1/end_device-0:1/sas_device/end_device-0:1/enclosure_identifier: Input/Output error /sys/devices/pci:00/:00:04.0/:05:00.0/host0/port-0:1/end_device-0:1/sas_device/end_device-0:1/bay_identifier: Input/Output error /sys/devices/pci:00/:00:06.0/:07:00.0/vpd: Input/Output error /sys/devices/pci:00/:00:06.0/:07:00.0/resource0: Input/Output error /sys/devices/pci:00/:00:06.0/:07:00.0/resource2: Input/Output error /sys/devices/pci:00/:00:06.0/:07:00.0/resource3: Input/Output error /sys/devices/pci:00/:00:06.0/:07:00.0/rom: Input/Output error /sys/devices/pci:00/:00:1c.4/:01:00.0/vpd: Input/Output error /sys/devices/pci:00/:00:1c.4/:01:00.0/resource0: Input/Output error /sys/devices/pci:00/:00:1c.5/:02:00.0/resource0: Input/Output error /sys/devices/pci:00/:00:1c.5/:02:00.0/net/eth1/carrier: Input/Output error /sys/devices/pci:00/:00:1c
Re: [Clamav-users] opensuse11.1 loses network connection duringa cronjob that utilizes freshclam and clamscan
Hi there -- I ran the script manually and added the exclude-dir argument for the directories in question and also for the /dev directory, and this time there was no loss of network connectivity. I'll keep and eye on things, but I think that solved the problem. Thanks for the help. -Original Message- From: clamav-users-boun...@lists.clamav.net [mailto:clamav-users-boun...@lists.clamav.net] On Behalf Of Nathan Brink Sent: Friday, January 09, 2009 9:21 AM To: ClamAV users ML Subject: Re: [Clamav-users] opensuse11.1 loses network connection duringa cronjob that utilizes freshclam and clamscan Kaplan, Andrew H. wrote: Hi there -- I reconfigured the network cards on the server in question so that one is disabled, and the other is set to autonegotiate. Additionally, I updated the BIOS for the motherboard and the NIC on the server. Even with these new configurations, the problem where the server lost its connection to the network still occurred. I manually ran the script that is the scheduled cron job, and I was able to track when the network connection was lost. The disconnect occurred about five minutes into the anti-virus scan. Attached to this e-mail is the script I did not see the script attached: maybe clamav's ML software filtered it out? that is run as well as the output summary text file. I glanced at the output and it indicated that ClamAV was traversing through /sys and trying to read some of the sysfs files. I think that writing to some of those files will cause the kernel to perform certain actions. This may depend on which options you have enabled in your kernel. Possibly, reading a certain file may somehow cause a device to be disabled or reset. There is the remotest chance that it may cause the kernel to perform some action which would cause you to lose network activity. I don't know much about the kernel, but I don't think this is supposed to happen. However, it would be a good idea to tell clamav not to read kernel-based virtual filesystems such as /proc and /sys. I think that adding --exclude /proc --exclude /sys to the arguments passed to clamscan or clamdscan will prevent clam trying to scan these directories. But I can't guarantee that having clam not read these files will fix the network-disconnecting problem. Just as a recap, the server in question is running openSuSE 11.1 which was updated from the openSuSE 10.3 version. The version of ClamAV is the 0.94.2 release that was compiled and installed from source. One thought came to mind: Would the removal of the source version of ClamAV and then having it replaced by the one that comes bundled with openSuSE be a solution to this issue? ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
[Clamav-users] opensuse11.1 loses network connection during a cronjob that utilizes freshclam and clamscan
Hi there -- One of our servers had opensuse 11.1 installed as an upgrade from opensuse 10.3 on Monday of this week, and has lost its network connection twice in as many days. The network cards on the server, of which one is currently in use and the other is up with the same ip address but not currently connected to the network, are the NetXtreme BCM5722 gigabit ethernet PCI express model. The cards are configured to run at 100Mbps Full Duplex with Autonegotiation turned off. A check of the Online Update utility, with the filter set to Needed Patches, did not list anything at the present time. The time of the disconnect from the network appears to be around 11:30 at night. This coincides with a cron job that runs a script designed to initiate the freshclam virus definition update script, and subsequently run the clamscan utility. The version of clamav is the 0.94.2 release. The application was installed via the source .gz files. I am suspicious of this being the cause, but it is something that deserves mention. The script that is utilized has been included as an attachment to this e-mail. Has anyone seen this before, and know what the cause is as well as how it can be corrected? Thanks. clamav_scan The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
[Clamav-users] Problem Updating Definitions in Version 0.94
Hi there - I am having major problems trying to run the freshclam script on a system with the 0.94 release. The problems that I am seeing are either being unable to get either an incremental or full update. What's going on, and what do I need to do in order to correct it? The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
[Clamav-users] Problem Running Freshclam
Hi there - I was checking the logs of one of our servers, and I discovered the automated freshclam process failed to update the virus definitions. I checked on the mirror-problem page, and went through the motions of renaming the mirrors.dat file, and manually running the freshclam utility with the -v option. A new files was created, and a diff command indicated there was no difference between the new and original version of the file. Even after I had done that, the error output appeared on-screen. An excerpt of the output is shown below: Querying current.cvd.clamav.net WARNING: Can't query current.cvd.clamav.net WARNING: Invalid DNS reply. Falling back to HTTP mode. Assuming modification time in the past If-Modified-Since: Mon, 27 Dec 2004 03:52:10 GMT Reading CVD header (main.cvd): ERROR: Can't get information about database.clamav.net: Temporary DNS error WARNING: Can't read main.cvd header from database.clamav.net (IP: ) Giving up on database.clamav.net... Update failed. Your network may be down or none of the mirrors listed in freshclam.conf is working. Check http://www.clamav.net/support/mirror-problem for possible reasons. I confirmed that DNS is operational on the system in question. The server is running Fedora Core 7 as its operating system. The version of ClamAV is 0.92.1, and it runs in conjunction with SpamAssassin 3.2.4, and MailScanner 4.64.3 on a Sendmail 8.14.1 release. Does anyone have an idea of what needs to be done to correct this? Thanks. The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Problem Running Freshclam
Hi there -- I spoke with our Information Security people, and I was able to configure the system in question to resolve to a different set of DNS servers. Once that was done, I reran freshclam, and this time the update completed successfully. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, March 31, 2008 1:00 PM To: ClamAV users ML Subject: Re: [Clamav-users] Problem Running Freshclam Kaplan, Andrew H. wrote: Hi there -- It appears the DNS server the server uses does not allow recursion. Is it possible to configure the freshclam.conf file to connect via the ip address of the database server, and if so what is the address to use? Thanks. You would be better off using a DNS server that allows you to recurse. There are multiple IPs and I would imagine they could change at any time. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Updated to Version 0.92 but Logwatch Utility Reports Version is still 0.91.2
Hi there - I recently upgraded ClamAV from version 0.91.2 to 0.92 via the source upgrade procedure shown on the ClamAV website. The clamd and freshclam binaries are running fine, and when I do a -V option to either of them, both come back with the latest version. I run the logwatch utility on the server in question, and the following is an excerpt from it: Last Status: WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.91.2 Recommended version: 0.92 DON'T PANIC! Read http://www.clamav.net/support/faq main.inc is up to date (version: 45, sigs: 169676, f-level: 21, builder: sven) daily.inc is up to date (version: 5263, sigs: 11446, f-level: 21, builder: ccordes) Received signal: wake up The following ERRORS and/or WARNINGS were detected when running the ClamAV update process. If these ERRORS and/or WARNINGS do not show up in the Last Status section above, then their underlying cause has probably been corrected. WARNINGS: Local version: 0.91.2 Recommended version: 0.92: 12 Time(s) Your ClamAV installation is OUTDATED!: 12 Time(s) Has anyone seen this and know where the discrepancy lies, and also how to correct it? Thanks. The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Problem Starting clamd after upgrade to 0.92
Hi there - I completed an upgrade of ClamAV to version 0.92 by following the appropriate procedure on the website. When I tried to start either clamd or freshclam, the error message shown below appears: error while loading shared libraries: libclamav.so.3: cannot open shared object file: No such file or directory How can I correct this? Thanks. The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Problem Starting clamd after upgrade to 0.92
Hi there -- Thanks for your e-mail. I ran the ldconfig utility, and afterwards was able to successfully run freshclam and clamd. Thanks for the help. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steven Stern Sent: Tuesday, December 18, 2007 1:51 PM To: ClamAV users ML Subject: Re: [Clamav-users] Problem Starting clamd after upgrade to 0.92 Kaplan, Andrew H. wrote: Hi there - I completed an upgrade of ClamAV to version 0.92 by following the appropriate procedure on the website. When I tried to start either clamd or freshclam, the error message shown below appears: error while loading shared libraries: libclamav.so.3: cannot open shared object file: No such file or directory How can I correct this? Thanks. Type ldconfig as root. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Question About Version 0.91.2
Hi there - I am prepared to upgrade our servers to version 0.91.2 of ClamAV, but I read several e-mails that mentioned operational problems with that version. Have these issues been resolved, or should I wait for the next version that is released later this year? Thanks. The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Latest Version Available for Fedora Core 5
Hi there -- Is the latest version of ClamAV 90.3-1, available for Fedora Core 5? I have seen this version available for RHEL 5, so if there is not one specifically written for FC5, can I use the RHEL version or someone other one? Thanks. The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] clamd issue
Hi there - I was checking the clamav, version 90.2, processes on our system, and I noticed the clamd daemon was not running. When I did a status check, the output read clamd dead but subsys locked. I restarted the daemon, but I am concerned that there was not monitoring going on during the time the daemon was not running. Has anyone seen this issue, and know what, if anything, needs to be done to correct it? Thanks. The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Freshclam not updating
Hi there -- I recently upgraded clamav to version 0.90.1. The method that I used was downloading the Fedora Core 5 binaries into a single directory, and running the rpm -Uvh *.rpm command. The installation completed successfully. I checked the log files earlier today and I came across the following message: The ClamAV update process (freshclam daemon) was not running! If you no longer wish to run freshclam, deleting the freshclam.log file will suppress this error message. I tried restarting the freshclam daemon via the /etc/init.d/freshclam script, and while it did appear to restart successfully, the following error message appeared onscreen: Starting freshclam: ERROR: Parse error at line 44: Option AllowSupplementaryGroups requires boolean argument. What change(s) do I need to make to what file(s) in order to correct this problem, and ensure that freshclam does update properly? Thanks. The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
RE: [Clamav-users] Freshclam not updating
Hi there -- I commented out the AllowSupplementaryGroups line in /etc/freshclam.conf and manually ran the freshclam binary. The update appeared to succeed. Thanks for the help. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of John W. Baxter Sent: Thursday, March 08, 2007 12:19 PM To: ClamAV users ML Subject: Re: [Clamav-users] Freshclam not updating On 3/8/07 8:43 AM, Daniel J McDonald [EMAIL PROTECTED] wrote: You will probably need to read through the whole freshclam.conf and clamd.conf file to make those changes. I learned a couple of emacs commands I hadn't found in 12 years of using emacs, in the course of comparing our running clamd and freshclam config files with the supplied files, and adjusting ours. My conclusion is that running ClamAV is educational. --John ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Upgrading ClamAV
Hi there - I received a warning message indicating that my ClamAV installation is outdated. The version that I am running is 0.88.4, while the recommended version is 0.88.5. I downloaded the Fedora Core 5 rpm packages as the installation method for the program. These came from the Binary packages page of the clamav website. Can I use yum update clamav or up2date -u clamav as the upgrade methods, or do I need to take a different route? Thanks. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Commercial Scanner ClamAV Timed Out Error Message
That's from MailScanner, indirectly from clamav. If there is a problem with ClamAV, perhaps the first step would be to upgrade ClamAV to version 0.88.1? At the very least it would help determine if the problem lies with the anti-virus software. Your thoughts? One user only? What kind of configuration do you have, MailScanner + MailWatch? At this point it appears to be only one user, although another user did report a relatively high amount of virus warnings. The configuration we have is MailScanner 4.54-1 with ClamAV 0.88.1 and SpamAssassin 3.03. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Commercial Scanner ClamAV Timed Out Error Message
Hi there - I am running clamav 0.88.1 on an HP-UX 10.20 trusted workstation. I am getting a series of the following error messages in the mail.log file: Commercial Scanner ClamAV Timed Out! Virus Scanning: Denial of Service attack detected! This appears to be affecting only one user. However, that user is getting virus warnings on virtually all his incoming mail. I am guessing the user's mailbox is somehow corrupted and the vast majority of these messages are false positives that are attributed to the state of the user's mailbox. My plan is to delete this existing mailbox and create a new one for the user. My question is, is/are there steps that I can take prior to doing the above act? Are there file(s) that I can look at or modify to correct this issue? Thanks. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Automating clamd and freshclam startup
Hi there - I want to have clamd and freshclam to automatically start on system boot, and to also be running in daemon mode in the background during routine operation. What is the best method to accomplishing this? Thanks. ___ http://lurker.clamav.net/list/clamav-users.html
RE: [Clamav-users] Automating clamd and freshclam startup
Sorry about that -- SuSE Linux 10.0. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Odhiambo Washington Sent: Wednesday, July 26, 2006 1:14 PM To: clamav-users@lists.clamav.net Subject: Re: [Clamav-users] Automating clamd and freshclam startup * On 26/07/06 13:08 -0400, Kaplan, Andrew H. wrote: | Hi there - | | | | I want to have clamd and freshclam to automatically start on system boot, and to | also be running in daemon | | mode in the background during routine operation. What is the best method to | accomplishing this? Thanks. OS? -Wash http://www.netmeister.org/news/learn2quote.html DISCLAIMER: See http://www.wananchi.com/bms/terms.php -- +==+ |\ _,,,---,,_ | Odhiambo Washington[EMAIL PROTECTED] Zzz /,`.-'`'-. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 +==+ I do not fear computers. I fear the lack of them. -- Isaac Asimov ___ http://lurker.clamav.net/list/clamav-users.html ___ http://lurker.clamav.net/list/clamav-users.html
RE: [Clamav-users] Automating clamd and freshclam startup
I did, and I found a script that appears to work with Qmail. I might need help hacking it to work with SuSE 10. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Odhiambo Washington Sent: Wednesday, July 26, 2006 1:38 PM To: clamav-users@lists.clamav.net Subject: Re: [Clamav-users] Automating clamd and freshclam startup * On 26/07/06 13:14 -0400, Kaplan, Andrew H. wrote: | Sorry about that -- SuSE Linux 10.0. Did you try searching on google how to do it? -Wash http://www.netmeister.org/news/learn2quote.html DISCLAIMER: See http://www.wananchi.com/bms/terms.php -- +==+ |\ _,,,---,,_ | Odhiambo Washington[EMAIL PROTECTED] Zzz /,`.-'`'-. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 +==+ Bacchus, n.: A convenient deity invented by the ancients as an excuse for getting drunk. -- Ambrose Bierce, The Devil's Dictionary ___ http://lurker.clamav.net/list/clamav-users.html ___ http://lurker.clamav.net/list/clamav-users.html
RE: [Clamav-users] Automating clamd and freshclam startup
Sorry about that. I am using SuSE 10. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gerard Seibert Sent: Wednesday, July 26, 2006 2:53 PM To: clamav-users@lists.clamav.net Subject: Re: [Clamav-users] Automating clamd and freshclam startup Kaplan, Andrew H. [EMAIL PROTECTED] I want to have clamd and freshclam to automatically start on system boot, and to also be running in daemon mode in the background during routine operation. What is the best method to accomplishing this? Thanks. It would really help if you stated what OS you are using. I am familiar with FreeBSD. If you are using that OS, a startup script for Clamd and Freshclam were installed for you. All you need do is activate them in the /etc/rc.conf file. Ciao! -- Gerard Seibert [EMAIL PROTECTED] I love cooking with wine. Sometimes I even put it in the food. Anonymous ___ http://lurker.clamav.net/list/clamav-users.html ___ http://lurker.clamav.net/list/clamav-users.html
RE: [Clamav-users] Automating clamd and freshclam startup
I did some further checking, and I did find in the contrib/init directory a binary that is specific for starting clamav in SuSE. However, when I copied the file in the /etc/init.d directory and ran it, there was no indication that either clamd or freshclam started. What else should I do? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kaplan, Andrew H. Sent: Wednesday, July 26, 2006 4:15 PM To: ClamAV users ML Subject: RE: [Clamav-users] Automating clamd and freshclam startup Sorry about that. I am using SuSE 10. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gerard Seibert Sent: Wednesday, July 26, 2006 2:53 PM To: clamav-users@lists.clamav.net Subject: Re: [Clamav-users] Automating clamd and freshclam startup Kaplan, Andrew H. [EMAIL PROTECTED] I want to have clamd and freshclam to automatically start on system boot, and to also be running in daemon mode in the background during routine operation. What is the best method to accomplishing this? Thanks. It would really help if you stated what OS you are using. I am familiar with FreeBSD. If you are using that OS, a startup script for Clamd and Freshclam were installed for you. All you need do is activate them in the /etc/rc.conf file. Ciao! -- Gerard Seibert [EMAIL PROTECTED] I love cooking with wine. Sometimes I even put it in the food. Anonymous ___ http://lurker.clamav.net/list/clamav-users.html ___ http://lurker.clamav.net/list/clamav-users.html ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Error in Delivering Notifications
Hi there - I have clamav 0.88 running on one of our systems in conjunction with MailScanner 4.33.3 and Sendmail 8.13.1. The following error message has been occurring on the system in question: Your message did not reach some or all of the intended recipients. Subject: Virus Detected Sent: 5/4/2006 4:21 PM The following recipient(s) could not be reached: [EMAIL PROTECTED] on 5/9/2006 4:29 PM Could not deliver the message in the time limit specified. Please retry or contact your administrator. hadron.mgh.harvard.edu.mgh.harvard.edu #4.4.7 SMTP; 450 [EMAIL PROTECTED]: Sender address rejected: Domain not found [EMAIL PROTECTED] on 5/9/2006 4:29 PM Could not deliver the message in the time limit specified. Please retry or contact your administrator. hadron.mgh.harvard.edu.mgh.harvard.edu #4.4.7 SMTP; 450 [EMAIL PROTECTED]: Sender address rejected: Domain not found [EMAIL PROTECTED] on 5/9/2006 4:29 PM Could not deliver the message in the time limit specified. Please retry or contact your administrator. hadron.mgh.harvard.edu.mgh.harvard.edu #4.4.7 SMTP; 450 [EMAIL PROTECTED]: Sender address rejected: Domain not found The extended domain name is incorrect, and I wanted to know what file(s) I should modify to correct this problem. Thanks. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Question About Quarantine
Hi there -- As a general rule of thumb, what is the oldest a file should be from any given day that is in the quarantine directory before it should be deleted from the system? ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] RE: Problem Upgrading ClamAV on HP-UX 10.20
To the people who helped me in getting ClamAV upgraded on my system, listed below are the modifications that needed to be done to get version 0.88 to install on the server in question. I appreciate the help that was given, and hopefully this information will be useful to anyone who may be confronted with a similar case. Files changed in clamav manager.c -- located in the freshclam directory dns.c -- located in the freshclam directory - manager.c Modify the lines that read: switch(h_errno) To read the following: switch(errno) NOTE: There are two instances of this line occurring in manager.c dns.c Locate the section of the file that has the following three lines: #ifndef PACKETSZ #define PACKETSZ 512 #endif Add the following lines to the above three: #ifndef INT16SZ #define INT16SZ 2 #endif ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
Hi there - One of my colleagues, who is a first-rate programmer, was able to compile a build of version 0.88 on the HP-UX box in question. He stated in his e-mail that he needed to modify the code in order for it to work due to some 'issues' with this version an the OS. I've asked him to elaborate further on what he had done, and as soon as I get the information, I will post it, if permitted, via e-mail. I just wanted to take the opportunity to thank everyone for their help, and to also apologize for this problematic issue. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
OK Andrew, you'll have to repeat the build with: CFLAGS=-D_XOPEN_SOURCE ./configure make I ran the above command using the following syntax: CFLAGS=-D_XOPEN_SOURCE ./configure As has happened before, the configure script appeared to complete without difficulty. The make command resulted in Error exit code 1. The gcc line preceding the error is as follows: gcc -DHAVE_CONFIG_H -DCL_NOTHREADS -I. -I. -I.. -I../shared -I../libclamav -I/usr/local/include -D_XOPEN_SOURCE= -c manager.c The h_errno text appeared shortly afterwards in the following manner: manager.c:503: 'h_errno' undeclared (first use in this function) manager.c:503: (Each undeclared identifier is reported only once manager.c:503: for each function it appears in.) The Error exit code 1 (three lines total) then appears. Also, at the suggestion of another mail list member, I tried the following with the configure script: ./configure (YOUR SETTINGS) CFLAGS=-D_XOPEN_SOURCE EXTENDED -I/usr/tools/gcc3/include LDFLAGS=-L/usr/tools/gcc3/lib The end-result was the configure script failing with the error message: checking for C compiler default output file name--- configure: error: C compiler cannot create executables. See 'config.log' for more details. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
The configure line should be: CFLAGS=-D_XOPEN_SOURCE_EXTENDED ./configure (there is an underscore before EXTENDED). That should work, but you are not finished, you'll have to check how the shared libraries are set up in the resulting executables. But let's do one thing at a time, just configure and make. I entered the command shown above verbatum, but got the following error message: CFLAGS=-D_XOPEN+SOURCE_EXTENDED: Command not found. When I reentered the above command using the syntax: ./configure CFLAGS=-D_XOPEN+SOURCE_EXTENDED the configure script ran without a problem. The make command continues to give me an Error exit code 1 message. While the gcc line that precedes the message read as follows: gcc -D_XOPEN_SOURCE_EXTENDED -o clamscan output.o geptopt.o memory.o cfgparser.o misc.o clamscan.o options.o others.o manager.o treewalk.o -L/usr/local/lib ../libclamav/.libs/libclamav.a.a -lz -lbz2 /usr/local/lib/libgmp.sl -Wl,+b -Wl,/usr/local/lib This was followed by the lines: /usr/ccs/bin/ld: Unsatisfied symbols: ntohl (code) collect2: ld returned 1 exit status Followed by the Error exit code 1 lines. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
OK, this is normal, we are missing some libraries in the link command. Easy
to
correct:
./configure CFLAGS=-D_XOPEN+SOURCE_EXTENDED LDFLAGS=-lsocket -lnls
When I ran the above command, the configure script failed and displayed the
following message:
checking for C compiler default output file name... configure: error: C compiler
cannot create executables
See 'config.log' for more details. Enclosed in this e-mail is the config.log
file.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ ./configure CFLAGS=-D_XOPEN_SOURCE_EXTENDED LDFLAGS=-lsocket -lnls
## - ##
## Platform. ##
## - ##
hostname = hadron.mgh.harvard.edu
uname -m = 9000/777
uname -r = B.10.20
uname -s = HP-UX
uname -v = A
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/tools/gcc3/bin
PATH: /usr/bin
PATH: /usr/ccs/bin
PATH: /usr/contrib/bin
PATH: /opt/nettladm/bin
PATH: /opt/pd/bin
PATH: /usr/bin/X11
PATH: /usr/contrib/bin/X11
PATH: /opt/upgrade/bin
PATH: /opt/vnc
PATH: /opt/ignite/bin
PATH: /opt/cfg2html
## --- ##
## Core tests. ##
## --- ##
configure:1531: checking build system type
configure:1549: result: hppa1.1-hp-hpux10.20
configure:1557: checking host system type
configure:1571: result: hppa1.1-hp-hpux10.20
configure:1579: checking target system type
configure:1593: result: hppa1.1-hp-hpux10.20
configure:1664: result: creating target.h - canonical system defines
configure:1808: checking for a BSD-compatible install
configure:1863: result: ./install-sh -c
configure:1874: checking whether build environment is sane
configure:1917: result: yes
configure:1982: checking for gawk
configure:2011: result: no
configure:1982: checking for mawk
configure:2011: result: no
configure:1982: checking for nawk
configure:2011: result: no
configure:1982: checking for awk
configure:1998: found /usr/bin/awk
configure:2008: result: awk
configure:2018: checking whether make sets $(MAKE)
configure:2038: result: yes
configure:2219: checking for gawk
configure:2245: result: awk
configure:2301: checking for gcc
configure:2317: found /usr/tools/gcc3/bin/gcc
configure:2327: result: gcc
configure:2571: checking for C compiler version
configure:2574: gcc --version /dev/null 5
gcc (GCC) 3.1
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2577: $? = 0
configure:2579: gcc -v /dev/null 5
Reading specs from /usr/tools/gcc3/lib/gcc-lib/hppa1.1-hp-hpux10.20/3.1/specs
Configured with: ../configure --prefix=/usr/tools/gcc3
--with-as=/usr/tools/gnu/bin/as
Thread model: single
gcc version 3.1
configure:2582: $? = 0
configure:2584: gcc -V /dev/null 5
gcc: argument to `-V' is missing
configure:2587: $? = 1
configure:2610: checking for C compiler default output file name
configure:2613: gcc -D_XOPEN_SOURCE_EXTENDED -lsocket -lnls conftest.c 5
/usr/ccs/bin/ld: Can't find library for -lsocket
collect2: ld returned 1 exit status
configure:2616: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME
| #define PACKAGE_TARNAME
| #define PACKAGE_VERSION
| #define PACKAGE_STRING
| #define PACKAGE_BUGREPORT
| #define PACKAGE clamav
| #define VERSION 0.88
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2654: error: C compiler cannot create executables
See `config.log' for more details.
## ##
## Cache variables. ##
## ##
ac_cv_build=hppa1.1-hp-hpux10.20
ac_cv_build_alias=hppa1.1-hp-hpux10.20
ac_cv_env_CC_set=''
ac_cv_env_CC_value=''
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value=-D_XOPEN_SOURCE_EXTENDED
ac_cv_env_CPPFLAGS_set=''
ac_cv_env_CPPFLAGS_value=''
ac_cv_env_CPP_set=''
ac_cv_env_CPP_value=''
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-lsocket -lnls'
ac_cv_env_build_alias_set=''
ac_cv_env_build_alias_value=''
ac_cv_env_host_alias_set=''
ac_cv_env_host_alias_value=''
ac_cv_env_target_alias_set=''
ac_cv_env_target_alias_value=''
ac_cv_host=hppa1.1-hp-hpux10.20
ac_cv_host_alias=hppa1.1-hp-hpux10.20
ac_cv_prog_AWK=awk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
ac_cv_target=hppa1.1-hp-hpux10.20
ac_cv_target_alias=hppa1.1-hp-hpux10.20
## - ##
## Output variables. ##
## - ##
ACLOCAL='${SHELL} /home/kaplan/clamav-0.88/missing --run aclocal-1.9'
ADDITIONAL_LIBS=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='${SHELL} /home/kaplan/clamav-0.88/missing --run tar'
AUTOCONF='${SHELL}
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
Anyway the LDFLAGS need a correction, just delete the -lsocket part, the log
shows that the socket library doesn't exist.
I entered the configure command without -lsocket part, and the script failed
with the same error mentioned in the previous e-mail.
Here is the latest version of the config.log file.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ ./configure CFLAGS=-D_XOPEN_SOURCE_EXTENDED LDFLAGS=-lnls
## - ##
## Platform. ##
## - ##
hostname = hadron.mgh.harvard.edu
uname -m = 9000/777
uname -r = B.10.20
uname -s = HP-UX
uname -v = A
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/tools/gcc3/bin
PATH: /usr/bin
PATH: /usr/ccs/bin
PATH: /usr/contrib/bin
PATH: /opt/nettladm/bin
PATH: /opt/pd/bin
PATH: /usr/bin/X11
PATH: /usr/contrib/bin/X11
PATH: /opt/upgrade/bin
PATH: /opt/vnc
PATH: /opt/ignite/bin
PATH: /opt/cfg2html
## --- ##
## Core tests. ##
## --- ##
configure:1531: checking build system type
configure:1549: result: hppa1.1-hp-hpux10.20
configure:1557: checking host system type
configure:1571: result: hppa1.1-hp-hpux10.20
configure:1579: checking target system type
configure:1593: result: hppa1.1-hp-hpux10.20
configure:1664: result: creating target.h - canonical system defines
configure:1808: checking for a BSD-compatible install
configure:1863: result: ./install-sh -c
configure:1874: checking whether build environment is sane
configure:1917: result: yes
configure:1982: checking for gawk
configure:2011: result: no
configure:1982: checking for mawk
configure:2011: result: no
configure:1982: checking for nawk
configure:2011: result: no
configure:1982: checking for awk
configure:1998: found /usr/bin/awk
configure:2008: result: awk
configure:2018: checking whether make sets $(MAKE)
configure:2038: result: yes
configure:2219: checking for gawk
configure:2245: result: awk
configure:2301: checking for gcc
configure:2317: found /usr/tools/gcc3/bin/gcc
configure:2327: result: gcc
configure:2571: checking for C compiler version
configure:2574: gcc --version /dev/null 5
gcc (GCC) 3.1
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2577: $? = 0
configure:2579: gcc -v /dev/null 5
Reading specs from /usr/tools/gcc3/lib/gcc-lib/hppa1.1-hp-hpux10.20/3.1/specs
Configured with: ../configure --prefix=/usr/tools/gcc3
--with-as=/usr/tools/gnu/bin/as
Thread model: single
gcc version 3.1
configure:2582: $? = 0
configure:2584: gcc -V /dev/null 5
gcc: argument to `-V' is missing
configure:2587: $? = 1
configure:2610: checking for C compiler default output file name
configure:2613: gcc -D_XOPEN_SOURCE_EXTENDED -lnls conftest.c 5
/usr/ccs/bin/ld: Can't find library for -lnls
collect2: ld returned 1 exit status
configure:2616: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME
| #define PACKAGE_TARNAME
| #define PACKAGE_VERSION
| #define PACKAGE_STRING
| #define PACKAGE_BUGREPORT
| #define PACKAGE clamav
| #define VERSION 0.88
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2654: error: C compiler cannot create executables
See `config.log' for more details.
## ##
## Cache variables. ##
## ##
ac_cv_build=hppa1.1-hp-hpux10.20
ac_cv_build_alias=hppa1.1-hp-hpux10.20
ac_cv_env_CC_set=''
ac_cv_env_CC_value=''
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value=-D_XOPEN_SOURCE_EXTENDED
ac_cv_env_CPPFLAGS_set=''
ac_cv_env_CPPFLAGS_value=''
ac_cv_env_CPP_set=''
ac_cv_env_CPP_value=''
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-lnls
ac_cv_env_build_alias_set=''
ac_cv_env_build_alias_value=''
ac_cv_env_host_alias_set=''
ac_cv_env_host_alias_value=''
ac_cv_env_target_alias_set=''
ac_cv_env_target_alias_value=''
ac_cv_host=hppa1.1-hp-hpux10.20
ac_cv_host_alias=hppa1.1-hp-hpux10.20
ac_cv_prog_AWK=awk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
ac_cv_target=hppa1.1-hp-hpux10.20
ac_cv_target_alias=hppa1.1-hp-hpux10.20
## - ##
## Output variables. ##
## - ##
ACLOCAL='${SHELL} /home/kaplan/clamav-0.88/missing --run aclocal-1.9'
ADDITIONAL_LIBS=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='${SHELL} /home/kaplan/clamav-0.88/missing --run tar'
AUTOCONF='${SHELL} /home/kaplan/clamav-0.88/missing --run autoconf'
AUTOHEADER='${SHELL} /home/kaplan/clamav-0.88/missing --run autoheader'
AUTOMAKE='${SHELL} /home/kaplan/clamav-0.88/missing --run
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
Here is an excerpt from the ntohl man page: SYNOPSIS: #include netinet/in.h _XOPEN_SOURCE_EXTENDED only #include arpa/inet.h unsigned long htonl (unsigned long hostlong); unsigned short htons (unsigned short hostshort); unsigned long ntohl (unsigned long netlong); unsigned short ntohs (unsigned short netshort); ... SEE ALSO gethostent (3N), getservent (3N). ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
There are 3 tests inside configure that use netdb.h and h_errno, they seem to be testing to see what variant of gethostbyname_r does the system have. You should have the result in config.log, look for lines that say checking for gethostbyname_r and everything below that should be interesting, but we are really looking for something like result: yes, and it takes 5 arguments about 9 lines below. What we are trying to do is see what is causing the build failure. In theory configure should have catched any problem. I checked the config.log file for the text you had mentioned: and the line reads configure:13334: result: yes, and it takes 5 arguments Do you need me to send you a copy of the log file? ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
OK, that means that configure is able to use h_errno and related stuff, which is good news. Now look in the log about 8 lines above (and just below the checking for gethostbyname_r), how was the test compiled? I have gcc -c -g -O2 conftest.c 5, does your log show more parameters to gcc? The line in question reads as follows:configure:13162: gcc -c -g 02 -I/usr/local/include conftest.c 5 The following text appears immediately after: cc1: warning: changing search order for system directory /usr/local/include cc1: warning: as it has already been specified as a non-system directory BTW try to use the installed gcc (2.95.2), if you use the newer one you'll have to install it later so that libgcc is somewhere permanent. Perhaps starting with no environment variables set will help. I contacted the administrator, who has since left the company, of this system, and asked him about the locally installed gcc (2.95.2). Here is an excerpt from the e-mail he sent in reply: The Makefile looks ok. I think the problem is the gcc version. You will have to mount /usr/tools and use the gcc installed on that to compile ClamAV. The one under /usr/contrib is no good. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
I suggest to start with a minimal set of well defined environment variables (PATH, CC, CFLAGS, LDFLAGS, nothing else), run configure, see any complaints there, add the required parameters to configure (the defaults install everything under /usr/local, I use --sysconfdir=/etc --enable-id- check --without-libcurl --with-dbdir=/usr/local/share/clamav) and run make. I defined the environment variables to use by entering the following at the command prompt: setenv CFLAGS -I/usr/tools/gcc3/include setenv LDFLAGS -L/usr/tools/gcc3/lib setenv CPPFLAGS -L/usr/tools/gcc3/include I then went ran the configure script. I checked for the result: yes, and it takes 5 arguments line, and it was there. The other important line, gcc -c -I/usr/tools/gcc3/include -L/usr/tools/gcc3/include -I/usr/local/include conftest.c 5 was also there. Unfortunately, the same error messages appeared. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
Let's step back for a minute once again. On your 10.20, system, go and look at /usr/include/netdb.h . Find the section where it defines h_errno which is a macro that will be defined to either a function call or an external variable depending on if the macro _REENTRANT is defined at compile time. (On 11.11, it is right at the end of the file). What do the definitions for h_errno look like on 10.20? The following text in the netdb.h file is what references h_errno: /* * Error return codes from gethostbyname() and gethostbyaddr() * (left in extern int h_errno). #ifdef _XOPEN_SOURCE EXTENDED extern int h_errno; #endif ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
setenv CFLAGS -I/usr/tools/gcc3/include setenv LDFLAGS -L/usr/tools/gcc3/lib setenv CPPFLAGS -L/usr/tools/gcc3/include This last one is wrong, cpp is the pre-processor it doesn't have anything to do with libraries so -L is a no-op. I can try running the configure and make script again using only the first two setenv options and see if that makes a difference. This was a ./configure followed by make? That is correct. The configure script is run, and then is immediately followed by the make script. There are no other configuration settings made in the interim. What's the exact gcc line before the error message? it's important that it looks like the one in conf.log, same order of -I's. The gcc line before the error message is the following: gcc -DHAVE_CONFIG_H -DCL_NOTHREADS -I. -I. -I.. -I.. -I../shared -I../libclamav -L/usr/tools/gcc3/include -I/usr/local/include -I/usr/tools/gcc3/include -c manager.c ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
Try adding -D_XOPEN_SOURCE EXTENDED to your CFLAGS.
I entered the setenv command three times using the following syntax:
setenv CFLAGS -I/usr/tools/gcc3/include
setenv LDFLAGS -L/usr/tools/gcc3/lib
setenv CFLAGS -D_XOPEN_SOURCE EXTENDED
After that, I ran the configure script, and it returned with the error message
shown below:
error: C compiler cannot create executables
See `config.log' for more details.
I've included the log file in this e-mail.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ ./configure
## - ##
## Platform. ##
## - ##
hostname = hadron.mgh.harvard.edu
uname -m = 9000/777
uname -r = B.10.20
uname -s = HP-UX
uname -v = A
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/tools/gcc3/bin
PATH: /usr/bin
PATH: /usr/ccs/bin
PATH: /usr/contrib/bin
PATH: /opt/nettladm/bin
PATH: /opt/pd/bin
PATH: /usr/bin/X11
PATH: /usr/contrib/bin/X11
PATH: /opt/upgrade/bin
PATH: /opt/vnc
PATH: /opt/ignite/bin
PATH: /opt/cfg2html
## --- ##
## Core tests. ##
## --- ##
configure:1531: checking build system type
configure:1549: result: hppa1.1-hp-hpux10.20
configure:1557: checking host system type
configure:1571: result: hppa1.1-hp-hpux10.20
configure:1579: checking target system type
configure:1593: result: hppa1.1-hp-hpux10.20
configure:1664: result: creating target.h - canonical system defines
configure:1808: checking for a BSD-compatible install
configure:1863: result: ./install-sh -c
configure:1874: checking whether build environment is sane
configure:1917: result: yes
configure:1982: checking for gawk
configure:2011: result: no
configure:1982: checking for mawk
configure:2011: result: no
configure:1982: checking for nawk
configure:2011: result: no
configure:1982: checking for awk
configure:1998: found /usr/bin/awk
configure:2008: result: awk
configure:2018: checking whether make sets $(MAKE)
configure:2038: result: yes
configure:2219: checking for gawk
configure:2245: result: awk
configure:2301: checking for gcc
configure:2317: found /usr/tools/gcc3/bin/gcc
configure:2327: result: gcc
configure:2571: checking for C compiler version
configure:2574: gcc --version /dev/null 5
gcc (GCC) 3.1
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2577: $? = 0
configure:2579: gcc -v /dev/null 5
Reading specs from /usr/tools/gcc3/lib/gcc-lib/hppa1.1-hp-hpux10.20/3.1/specs
Configured with: ../configure --prefix=/usr/tools/gcc3
--with-as=/usr/tools/gnu/bin/as
Thread model: single
gcc version 3.1
configure:2582: $? = 0
configure:2584: gcc -V /dev/null 5
gcc: argument to `-V' is missing
configure:2587: $? = 1
configure:2610: checking for C compiler default output file name
configure:2613: gcc -D_XOPEN_SOURCE EXTENDED -L/usr/tools/gcc3/lib conftest.c
5
gcc: EXTENDED: No such file or directory
configure:2616: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME
| #define PACKAGE_TARNAME
| #define PACKAGE_VERSION
| #define PACKAGE_STRING
| #define PACKAGE_BUGREPORT
| #define PACKAGE clamav
| #define VERSION 0.88
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2654: error: C compiler cannot create executables
See `config.log' for more details.
## ##
## Cache variables. ##
## ##
ac_cv_build=hppa1.1-hp-hpux10.20
ac_cv_build_alias=hppa1.1-hp-hpux10.20
ac_cv_env_CC_set=''
ac_cv_env_CC_value=''
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-D_XOPEN_SOURCE EXTENDED'
ac_cv_env_CPPFLAGS_set=''
ac_cv_env_CPPFLAGS_value=''
ac_cv_env_CPP_set=''
ac_cv_env_CPP_value=''
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-L/usr/tools/gcc3/lib
ac_cv_env_build_alias_set=''
ac_cv_env_build_alias_value=''
ac_cv_env_host_alias_set=''
ac_cv_env_host_alias_value=''
ac_cv_env_target_alias_set=''
ac_cv_env_target_alias_value=''
ac_cv_host=hppa1.1-hp-hpux10.20
ac_cv_host_alias=hppa1.1-hp-hpux10.20
ac_cv_prog_AWK=awk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
ac_cv_target=hppa1.1-hp-hpux10.20
ac_cv_target_alias=hppa1.1-hp-hpux10.20
## - ##
## Output variables. ##
## - ##
ACLOCAL='${SHELL} /home/kaplan/clamav-0.88/missing --run aclocal-1.9'
ADDITIONAL_LIBS=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='${SHELL} /home/kaplan/clamav-0.88/missing --run tar'
AUTOCONF='${SHELL} /home/kaplan/clamav-0.88/missing --run
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
Try unsetting all variables except PATH (i.e. no CLFAGS, no LDFLAGS), does configure work as before? does make work? Which PATH statement(s) are you referring to? ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
Try unsetting all variables except PATH (i.e. no CLFAGS, no LDFLAGS), does configure work as before? does make work? I ran the unsetenv command on the CFLAGS and LDFLAGS variables. After that, I ran configure and make. Configure worked as before, but make still gives an Error 1 message. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] RE: Problem Upgrading ClamAV on HP-UX 10.20
Hi there --
I mounted an NFS directory that has a newer version of gcc/ I then mounted tthe
following lines to my .cshrc file:
setenv GCC_PATH /usr/tools/gcc3
setenv PATH ${GCC_PATH}/bin:${PATH}
setenv LD_LIBRARY_PATH ${GCC_PATH}/lib
alias gcc /usr/tools/gcc3/
After the changes were made, I ran source .cshrc to have them go into effect.
I then went through the motions of running the configure script and then the
make command. I encountered an Exit Status 1 error, although the cause of the
error seems different than before.
I've included it in this e-mail as an attachment. Is there something else I need
to do? Thanks.
___
http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
I made the changes you had suggested to the .cshrc file.
setenv LD_LIBRARY_PATH ${GCC_PATH}/lib
This won't work, get rid of it.
I commented out that line.
alias gcc /usr/tools/gcc3/
What's this for? Don't use this, first check if changing your path gives you
the new gcc: `which gcc` and `gcc --version`
I commented out that line as well, ran source .cshrc and then ran which gcc and
gcc --version. The which gcc command gave me
the following output: gcc: aliased to /usr/tools/gcc3/. When I ran the gcc
--version command, I got the following message:
/usr/tools/gcc3/: Permission denied. When I ran the gcc --version command as
sudo user, the following appeared onscreen:
Gcc (GCC) 3.1
You can do this if you have a cc on the PATH:
CC=gcc ./configure ...
Or to avoid the older gcc:
CC=/usr/tools/gcc3/bin/gcc ./configure ...
I didn't make changes to the PATH as of yet.
When I ran the make command as sudo and a regular user, the following error
message appeared:
Cc1: warning: changing search order for system directory /usr/local/include
Cc1: warning: as it has already been specified as a non-system directory
Manager.c: In function 'wwwconnect':
Manager.c:503: 'h_errno' undeclared (first use in this function)
Manager.c:503: (each undeclared identifier is reported only once
Manager.c:503: for each function it appears in.)
*** Error exit code 1
Stop
*** Error exit code 1
Stop
*** Error exit code 1
Stop.
Let me know if you need me to send you the attachment.
___
http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
Perhaps setting the header path explicitly, as in: CFLAGS=-I/usr/include ./configure ... I don't know into which file the CFLAGS line goes, or if it gets executed from the command prompt. When I ran the make script as a regular user, I got an error 1 message due to a permission denied error. I also tried adding the SHLIB_PATH variable to the .cshrc file. The results were the same if I tried to compile as a regular or sudo user. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
No file, the above is the command typed on a terminal to configure the package. It may be different under csh, but you can use 'setenv CFLAGS -I/usr/include' before running ./configure I ran the command setenv CFLAGS -I/usr/include as a regular user and it seemed to accept the command. When I did the same thing as root, I needed to include the full pathname to the setenv binary. I have a question: did you execute configure just before make? There may be left over temporary files wich belong to root and no regular user can delete. I think that's the reason for the permission denied message. I did execute configure just before make, but that was after I ran the make distclean command. That should have taken care of all files, unless there is another directory involved in the compilation procedure. I wouldn't set SHLIB_PATH or any library path; the reason is that you were setting it to the mounted directory and it's better to leave the path pointing to the regular libraries which won't dissapear when you unmount the directory. I removed the SHLIB_PATH command from the .cshrc file, and tried the procedure again, without success...I am at a loss here. ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Re: Problem Upgrading ClamAV on HP-UX 10.20
Same message about h_errno? Yes -- the message is the same. ___ http://lurker.clamav.net/list/clamav-users.html
RE: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX10.20
When compiling version 0.88 of ClamAV, will version 2.95.2 work, or do I need to upgrade to a newer version of gcc? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kaplan, Andrew H. Sent: Thursday, February 02, 2006 9:03 PM To: ClamAV users ML Subject: RE: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX10.20 Hi there -- The version of gcc running on the system is 2.95.2 19991024 (release) From: [EMAIL PROTECTED] on behalf of René Berber Sent: Thu 2/2/2006 8:06 PM To: clamav-users@lists.clamav.net Subject: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX 10.20 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Kaplan, Andrew H. wrote: I located the netdb.h file in the /usr/include directory as opposed to the /usr/local directory. When I checked out its contents, the line that contained the text HOST_NOT_FOUND appeared to be commented out. Here is the syntax of that line: #define HOST_NOT_FOUND 1 /* Authoritative Answer Host not found */ This is a correct definition. It's not surrounded by #if ... #fi, is it? If the file needs to be located in /usr/local, can a symbolic link be created in /usr/local that points to /usr/include? No, that was my mistake, I wrote the wrong path. Now back to the original problem, why are those warnings appearing? Looking at the code the warning means that h_errno cannot take the value HOST_NOT_FOUND, h_errno is also defined in netdb.h just above the define. I can't see how the compiler determined that this part of the code is supposed to be unreachable (it really is reachable). That's two strange thing with the compilation, where is the -Werror? and why the compiler mistakenly thinks that some part of the code is unreachable? Perhaps I can think of something later. What version is your gcc? (i.e. gcc --version) - -- René Berber -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (Cygwin) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iEYEARECAAYFAkPirKAACgkQL3NNweKTRgz7oACg3wkezPfHa1zSMnWpI8E51pNw fLAAn22NXbnGpBo8SQAS5tdNYdYMGAcn =/70i -END PGP SIGNATURE- ___ http://lurker.clamav.net/list/clamav-users.html ___ http://lurker.clamav.net/list/clamav-users.html
RE: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX10.20
Hi there -- My predecessor was able to install version 0.75 onto the system in question. He compiled and installed from source. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeff Donsbach Sent: Friday, February 03, 2006 6:39 PM To: ClamAV users ML Subject: Re: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX10.20 Andrew, Let's step back a minute have you ever been able to compile ANY version of ClamAV on your 10.20 machine? Or, is this your first attempt? It does not look like ClamAV is one of the packages that hpux.connect.org.uk has ported. Jeff D ___ http://lurker.clamav.net/list/clamav-users.html ___ http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Problem Upgrading to version 0.88 on HP-UX 10.20
Hi there - I have downloaded the source code for version 0.88 onto an HP-UX 10.20 system. After gunzipping and untarring the file, I run the configure script as a sudo user and it appears to finish without problem. When I run the make command, again as a sudo user, I get an Error exit code 1. The tail end of the make output is shown below: manager.c:505: warning: unreachable code at beginning of switch statement manager.c:568: warning: unreachable code at beginning of switch statement *** Error exit code 1 Stop. *** Error exit code 1 Stop. *** Error exit code 1 Stop. What do I need to do to correct this? Thanks. ___ http://lurker.clamav.net/list/clamav-users.html
RE: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX 10.20
HI there -- I checked my .login and .cshrc files for any CLAGS reference, and there was none. I also checked the d.profile and profile files with the same result. Is there an option in the configure script that changes the gcc option? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of René Berber Sent: Thursday, February 02, 2006 4:13 PM To: clamav-users@lists.clamav.net Subject: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX 10.20 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Kaplan, Andrew H. wrote: I have downloaded the source code for version 0.88 onto an HP-UX 10.20 system. After gunzipping and untarring the file, I run the configure script as a sudo user and it appears to finish without problem. When I run the make command, again as a sudo user, I get an Error exit code 1. The tail end of the make output is shown below: manager.c:505: warning: unreachable code at beginning of switch statement manager.c:568: warning: unreachable code at beginning of switch statement *** Error exit code 1 [snip] You are using an option in the compiler that causes warnings to be treated as errors, that is why this build failed. With gcc the option is -Werror, perhaps you did put that in CFLAGS or your envirnoment setting have it. HTH - -- René Berber -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (Cygwin) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iEYEARECAAYFAkPideAACgkQL3NNweKTRgwztgCg2oQK5FARToP/aMceoQzAGmqG eaIAmwehuFc4Vy2uoirZln0KzLa/2gPA =GBmb -END PGP SIGNATURE- ___ http://lurker.clamav.net/list/clamav-users.html ___ http://lurker.clamav.net/list/clamav-users.html
RE: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX 10.20
Hi there -- I located the netdb.h file in the /usr/include directory as opposed to the /usr/local directory. When I checked out its contents, the line that contained the text HOST_NOT_FOUND appeared to be commented out. Here is the syntax of that line: #define HOST_NOT_FOUND 1 /* Authoritative Answer Host not found */ If the file needs to be located in /usr/local, can a symbolic link be created in /usr/local that points to /usr/include? From: [EMAIL PROTECTED] on behalf of René Berber Sent: Thu 2/2/2006 7:20 PM To: clamav-users@lists.clamav.net Subject: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX 10.20 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Andrew, Let's go back to: manager.c:505: warning: unreachable code at beginning of switch statement manager.c:568: warning: unreachable code at beginning of switch statement These 2 warnings shouldn't happen. Do you have a netdb.h file? Must be under /usr/local but could be somewhere else if you installed bind (for instance under /usr/local/include/isc). Does it have a define for HOST_NOT_FOUND? If it doesn't, and it looks this way for those warnings to appear, then your resolver installation is bad or somewhere else. The point is clamav's configure found a netdb.h that does not define HOST_NOT_FOUND, that produced the warning, and that header is not what is normally expected. You have to find out where did that header came from, and if you have more than one by that name, how to use the good one to build clamav. - -- René Berber -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (Cygwin) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iEYEARECAAYFAkPiobkACgkQL3NNweKTRgxMjgCfb9ogg3a/1CvowuQnT3go+4Ic GOgAoLsMFIuAw+Px/mikeXbaPqvJmQoU =AFTO -END PGP SIGNATURE- ___ http://lurker.clamav.net/list/clamav-users.html ___ http://lurker.clamav.net/list/clamav-users.html
RE: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX 10.20
Hi there -- The version of gcc running on the system is 2.95.2 19991024 (release) From: [EMAIL PROTECTED] on behalf of René Berber Sent: Thu 2/2/2006 8:06 PM To: clamav-users@lists.clamav.net Subject: [Clamav-users] Re: Problem Upgrading to version 0.88 on HP-UX 10.20 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Kaplan, Andrew H. wrote: I located the netdb.h file in the /usr/include directory as opposed to the /usr/local directory. When I checked out its contents, the line that contained the text HOST_NOT_FOUND appeared to be commented out. Here is the syntax of that line: #define HOST_NOT_FOUND 1 /* Authoritative Answer Host not found */ This is a correct definition. It's not surrounded by #if ... #fi, is it? If the file needs to be located in /usr/local, can a symbolic link be created in /usr/local that points to /usr/include? No, that was my mistake, I wrote the wrong path. Now back to the original problem, why are those warnings appearing? Looking at the code the warning means that h_errno cannot take the value HOST_NOT_FOUND, h_errno is also defined in netdb.h just above the define. I can't see how the compiler determined that this part of the code is supposed to be unreachable (it really is reachable). That's two strange thing with the compilation, where is the -Werror? and why the compiler mistakenly thinks that some part of the code is unreachable? Perhaps I can think of something later. What version is your gcc? (i.e. gcc --version) - -- René Berber -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (Cygwin) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iEYEARECAAYFAkPirKAACgkQL3NNweKTRgz7oACg3wkezPfHa1zSMnWpI8E51pNw fLAAn22NXbnGpBo8SQAS5tdNYdYMGAcn =/70i -END PGP SIGNATURE- ___ http://lurker.clamav.net/list/clamav-users.html ___ http://lurker.clamav.net/list/clamav-users.html
