Re: [Clamav-users] Duplicate signatures?
Török Edvin wrote: On 6/4/07, Fajar A. Nugraha [EMAIL PROTECTED] wrote: # ls -sR1 /var/clamav.bad 9145 main.cvd 0 main.inc You have both a main.inc, and a main.cvd. Thus those signatures are loaded twice. This problem has been discussed on this list a while ago, look in the archives. --Edwin How does one get a main.inc directory? I thought it was having ScriptedUpdates yes in the conf file and experimental code enabled at build time but that doesn't do it. dp ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Duplicate signatures?
Dennis Peterson wrote: How does one get a main.inc directory? I thought it was having ScriptedUpdates yes in the conf file and experimental code enabled at build time but that doesn't do it. I believe ScriptedUpdates is enabled by default on non-experimental build as well, unless you disable it in clamd.conf. Regards, Fajar ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Is safe to terminate freshclam with SIGKILL?
Hello, in the process of the installation of a software package it need to stop any running instanc of freshclam. This was done with a invoke-rc.d stop clamav-freshclam. However it takes several minutes and we want to speed up the process. Now we use SIGKILL to stop it faster, but we don't know wether is safe to do this or we may break anything. Someone can clarify me this issue? Many thanks, Javier ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Error after upgrade
I Upgraded from 0.88.6 to 0.90.3. I did a make uninstall of 0.88.6 and then built 0.90.3 from source. No errors during compile. When I run clamscan or freshclam, I'm receiving: clamscan: error while loading shared libraries: libclamav.so.2: cannot open shared object file: No such file or directory Not sure where to proceed from here. I'm on Fedora Core 6 (2.6.18-1.2849.fc6). Any help appreciated. Christian Christian Campbell Systems Engineer Bruegger's Enterprises Inc. Desk: 802-652-9270 Cell: 802-734-5023 Fax: 802-660-4034 Email: ccampbell at brueggers dot com PGP Public Key available via PGP keyservers or http://www2.brueggers.com/pgp/ccampbell.html We all know Linux is great... it does infinite loops in 5 seconds. --Linus Torvalds ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] error can't create lock file database directory
On Sat, 02 Jun 2007 03:38:55 -0400, night duke [EMAIL PROTECTED] wrote: how can i fix this? does anyone know when will be released the rpm files of version 0.90.3? Thanks freshclam --debug ClamAV update process started at Sat Jun 2 03:24:50 2007 LibClamAV debug: Can't create Lock file for Database Directory: /usr/ local/share/clamav main.inc is up to date (version: 43, sigs: 104500, f-level: 14, build er: sven) daily.inc is up to date (version: 3337, sigs: 16524, f-level: 15, bui lder: sven) LibClamAV Error: Database Directory: /usr/local/share/clamav not lock ed - Are you sure 90.3 will fix this problem, I didn't see anything in the Changlog? I have had this problem since .90 came out, and also with .90.1 and .90.2. I run freshclam out of cron, and I just might wrap freshclam with a shell script to remove the .dbLock file, before I call the real freshclam. Thanks Paul ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Error after upgrade
[EMAIL PROTECTED] wrote: I Upgraded from 0.88.6 to 0.90.3. I did a make uninstall of 0.88.6 and then built 0.90.3 from source. No errors during compile. When I run clamscan or freshclam, I'm receiving: clamscan: error while loading shared libraries: libclamav.so.2: cannot open shared object file: No such file or directory Not sure where to proceed from here. Do you have the path/to/lib directory in /etc/ld.so.conf and did you do an ldconfig? Does locate libclamav.so.2 return any results? Grts, Rob ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] Freeze after reading db ?
Hi, i'm using Clamav inside the Zimbra Collaboration Suite on ubuntu 6. Clamav version 0.90.2, on ubuntu 6.06.1 server. This behaviour happened with 0.90.3 too. I see that amavisd cannot connect to Clamav Jun 5 00:30:02 mailserver amavis[4348]: (04348-01) Checking: DkmOYJDUMtQR [80.247.70.64] ## - Jun 5 00:30:03 mailserver amavis[4348]: (04348-01) ClamAV-clamd: Can't connect to INET socket 127.0.0.1:3310: Connection refused, retrying (1) Jun 5 00:30:04 mailserver amavis[4348]: (04348-01) (!)ClamAV-clamd: Can't connect to INET socket 127.0.0.1:3310: Connection refused, retrying (2) Jun 5 00:30:07 mailserver zimbramon[20838]: 20838:info: 2007-06-05 00:30:06, QUEUE: 4 1 and looking at clamd.log i see these messages: Mon Jun 4 19:35:33 2007 - +++ Started at Mon Jun 4 19:35:33 2007 Mon Jun 4 19:35:33 2007 - clamd daemon 0.90.3 (OS: linux-gnu, ARCH: i386, CPU: i686) Mon Jun 4 19:35:33 2007 - Log file size limited to 20971520 bytes. Mon Jun 4 19:35:33 2007 - Reading databases from /opt/zimbra/clamav/db Mon Jun 4 19:37:12 2007 - +++ Started at Mon Jun 4 19:37:12 2007 Mon Jun 4 19:37:12 2007 - clamd daemon 0.90.3 (OS: linux-gnu, ARCH: i386, CPU: i686) Mon Jun 4 19:37:12 2007 - Log file size limited to 20971520 bytes. Mon Jun 4 19:37:12 2007 - Reading databases from /opt/zimbra/clamav/db Mon Jun 4 19:38:59 2007 - +++ Started at Mon Jun 4 19:38:59 2007 Mon Jun 4 19:38:59 2007 - clamd daemon 0.90.3 (OS: linux-gnu, ARCH: i386, CPU: i686) Mon Jun 4 19:38:59 2007 - Log file size limited to 20971520 bytes. Mon Jun 4 19:38:59 2007 - Reading databases from /opt/zimbra/clamav/db No errors and no crash messages. Privs are ok: drwxr-xr-x 2 zimbra zimbra4096 Jun 4 19:43 . drwxr-xr-x 9 zimbra zimbra4096 Jun 4 17:45 .. -rwxrwxr-- 1 zimbra zimbra 0 Jun 4 19:43 .dbLock -rw-r--r-- 1 zimbra zimbra 608128 Jun 4 19:12 daily.cvd -rw-r--r-- 1 zimbra zimbra 9351789 Jun 4 19:11 main.cvd -rw--- 1 zimbra zimbra 52 Jun 4 19:43 mirrors.dat And the file log is very small (fresh install) -rw-r--r-- 1 zimbra zimbra 21087 2007-06-05 00:34 /opt/zimbra/log/clamd.log And the process seems to be running, but frozen: [EMAIL PROTECTED]:~$ ps -ax | grep clamd Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html 20416 ?Rs 1:01 /opt/zimbra/clamav/sbin/clamd --config-file /opt/zimbra/conf/clamd.conf 20443 pts/0S+ 0:00 grep clamd I asked help on zimbra forums but still got no answers. Any idea? Thank you very much in advance, aNt1X ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Duplicate signatures?
Fajar A. Nugraha wrote: Dennis Peterson wrote: How does one get a main.inc directory? I thought it was having ScriptedUpdates yes in the conf file and experimental code enabled at build time but that doesn't do it. I believe ScriptedUpdates is enabled by default on non-experimental build as well, unless you disable it in clamd.conf. Regards, Fajar Right - that's what I have, and I get daily.inc updates but no main.inc. I got a corrupt main.inc when the last main.xxx was released (server overload) and finally ended up with a main.cvd. I tried deleting the main.cvd and refreshing, thinking I'd get the main.inc and got another main.cvd instead. dp ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Freeze after reading db ?
Marco Simioni wrote: Hi, i'm using Clamav inside the Zimbra Collaboration Suite on ubuntu 6. Clamav version 0.90.2, on ubuntu 6.06.1 server. This behaviour happened with 0.90.3 too. I see that amavisd cannot connect to Clamav Any idea? Run clamconf and put the results here. dp ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Freeze after reading db ?
Run clamconf and put the results here. The clamd is started with the option --config-file /opt/zimbra/conf/clamd.conf so i started the clamconf with the option --config-dir /opt/zimbra/conf/. Here is the output: [EMAIL PROTECTED]:~/clamav/bin$ ./clamconf --config-dir /opt/zimbra/conf/ /opt/zimbra/conf//clamd.conf: clamd directives - LogFile = /opt/zimbra/log/clamd.log LogFileUnlock = no LogFileMaxSize = 20971520 LogTime = yes LogClean = no LogVerbose = no LogSyslog = yes LogFacility = LOG_LOCAL0 PidFile = /opt/zimbra/log/clamd.pid TemporaryDirectory not set ScanPE = yes ScanELF = yes DetectBrokenExecutables = no ScanMail = yes MailFollowURLs = no MailMaxRecursion = 64 PhishingSignatures = yes AlgorithmicDetection = yes ScanHTML = yes ScanOLE2 = yes ScanPDF = no ScanArchive = yes ArchiveMaxFileSize = 104857600 ArchiveMaxRecursion = 8 ArchiveMaxFiles = 1000 ArchiveMaxCompressionRatio = 250 ArchiveLimitMemoryUsage = no ArchiveBlockEncrypted = no ArchiveBlockMax = no DatabaseDirectory = /opt/zimbra/clamav/db TCPAddr not set TCPSocket = 3310 LocalSocket not set MaxConnectionQueueLength = 15 StreamMaxLength = 1024 StreamMinPort = 1024 StreamMaxPort = 2048 MaxThreads = 10 ReadTimeout = 120 IdleTimeout = 30 MaxDirectoryRecursion = 15 FollowDirectorySymlinks = no FollowFileSymlinks = no ExitOnOOM = no Foreground = no Debug = no LeaveTemporaryFiles = no FixStaleSocket = no User = zimbra AllowSupplementaryGroups = no SelfCheck = 1800 VirusEvent not set NodalCoreAcceleration = no ClamukoScanOnAccess not set ClamukoScanOnOpen not set ClamukoScanOnClose not set ClamukoScanOnExec not set ClamukoIncludePath not set ClamukoExcludePath not set ClamukoMaxFileSize = 5242880 /opt/zimbra/conf//freshclam.conf: freshclam directives - LogVerbose = no LogSyslog = no LogFacility = LOG_LOCAL6 PidFile = /opt/zimbra/log/freshclam.pid DatabaseDirectory = /opt/zimbra/clamav/db Foreground = no Debug = no AllowSupplementaryGroups = no DatabaseOwner = zimbra Checks = 12 UpdateLogFile = /opt/zimbra/log/freshclam.log DNSDatabaseInfo = current.cvd.clamav.net DatabaseMirror = db.us.clamav.net MaxAttempts = 3 ScriptedUpdates = yes HTTPProxyServer not set HTTPProxyPort not set HTTPProxyUsername not set HTTPProxyPassword not set HTTPUserAgent not set NotifyClamd = /opt/zimbra/conf/clamd.conf OnUpdateExecute not set OnErrorExecute not set OnOutdatedExecute not set LocalIPAddress not set ConnectTimeout = 30 ReceiveTimeout = 30 [EMAIL PROTECTED]:~/clamav/bin$ ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Freeze after reading db ?
Marco Simioni wrote: Run clamconf and put the results here. The clamd is started with the option --config-file /opt/zimbra/conf/clamd.conf so i started the clamconf with the option --config-dir /opt/zimbra/conf/. Here is the output: TCPAddr not set TCPSocket = 3310 I think I'd start here. It appears you have not updated your config file correctly. dp ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Freeze after reading db ?
TCPAddr not set TCPSocket = 3310 I think I'd start here. It appears you have not updated your config file correctly. Very strange, because it is a fresh zimbra install into a fresh ubuntu, i usually don't have to modify ANY config file. Also, the comment in the config file says: # TCP address. # By default we bind to INADDR_ANY, probably not wise. # Enable the following to provide some degree of protection # from the outside world. # Default: disabled # By default we bind to INADDR_ANY, probably not wise. #TCPAddr 127.0.0.1 So, clamav shouldn't listen binding to INADDR_ANY? Also, isn't strange that after the Reading databases from... i don't get the following messages, like loaded signatures ? ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Freeze after reading db ?
Marco Simioni wrote: TCPAddr not set TCPSocket = 3310 I think I'd start here. It appears you have not updated your config file correctly. Very strange, because it is a fresh zimbra install into a fresh ubuntu, i usually don't have to modify ANY config file. Also, the comment in the config file says: # TCP address. # By default we bind to INADDR_ANY, probably not wise. # Enable the following to provide some degree of protection # from the outside world. # Default: disabled # By default we bind to INADDR_ANY, probably not wise. #TCPAddr 127.0.0.1 So, clamav shouldn't listen binding to INADDR_ANY? Yes - I'd expected to see a wrong address there. It seems ok. So with clamd running, telnet to the port and tell it to reload (use upper case as shown) and see what you get in your log: telnet localhost 3310 RELOAD dp ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Freeze after reading db ?
Yes - I'd expected to see a wrong address there. It seems ok. So with clamd running, telnet to the port and tell it to reload (use upper case as shown) and see what you get in your log: telnet localhost 3310 RELOAD dp Ok. I tried to manually start clamd and telnet locally to it. I think i got it, while doing this test. It seems that manually starting Clamav is correctly listening on 3310, after nealy 1 minute of CPU consumption (it is an old pc). But if I tell zimbra to automatically start Clamav, it seems that some sort of timeout occours and Clamav is restarted by Zimbra every 1-2 minutes or so. I'll try to check if there is some sort of timeout. Thank you man, and sorry, but i thought it was a Clamav related problem, but now it seems that it is a timeout-related issue! :) Bye, and thanks again aNt1X ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Duplicate signatures?
At 10:13 AM 6/5/2007, Dennis Peterson wrote: Fajar A. Nugraha wrote: Dennis Peterson wrote: How does one get a main.inc directory? I thought it was having ScriptedUpdates yes in the conf file and experimental code enabled at build time but that doesn't do it. I believe ScriptedUpdates is enabled by default on non-experimental build as well, unless you disable it in clamd.conf. Regards, Fajar Right - that's what I have, and I get daily.inc updates but no main.inc. I got a corrupt main.inc when the last main.xxx was released (server overload) and finally ended up with a main.cvd. I tried deleting the main.cvd and refreshing, thinking I'd get the main.inc and got another main.cvd instead. dp main.inc is created only when a scripted update is applied. Since main.cvd doesn't change often, you'll have a main.cvd until the next update to that database is released. main.inc is deleted if it's corrupted or if there is an update but the scripted update file isn't available/can't be downloaded. -- Noel Jones ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] PID file permissions for clamd and freshclam?
I want clamd and freshclam (running in daemon mode) to create PID files in /var/run. Both are running as user and group amavisd. Amavisd does not have permissions to create files in /var/run. What is the best (safest) way to give amavisd permissions to create the PID file in /var/run? Thanks! ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] PID file permissions for clamd and freshclam?
On Jun 5, 2007, at 2:31 PM, Ken Morley wrote: I want clamd and freshclam (running in daemon mode) to create PID files in /var/run. Both are running as user and group amavisd. Amavisd does not have permissions to create files in /var/run. What is the best (safest) way to give amavisd permissions to create the PID file in /var/run? Create a subdirectory under /var/run like /var/run/clamav or /var/run/ amavis(d?) which is owned by the amavisd user and group, and create your pidfiles under there. It is not desirable to make /var/run itself world-writable, although if you really want to do so, give it 1777 permisions like /tmp has. -- -Chuck ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
[Clamav-users] compiling fails 0.90.3 on Mac OS X Server 10.3.9
running: ./configure --sysconfdir=/etc --with-user=clamav --with- group=clamav --enable-experimental seems to run OK except for an anomaly while checking curl: checking for __gmpz_init in -lgmp... yes checking for curl = 7.10.0... ./configure: line 1: pkg-config: command not found 7.10.2 checking for recvmsg... yes fwiw: curl --version curl 7.10.2 (powerpc-apple-darwin7.0) libcurl/7.10.2 OpenSSL/ 0.9.7l zlib/1.1.4 subsequent make runs for a bit, then: gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I./unrar -I/usr/include -I/ usr/include -g -O2 -MT blob.lo -MD -MP -MF .deps/blob.Tpo -c blob.c - o blob.o /dev/null 21 if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I./unrar -I/usr/include -I/usr/include -g -O2 -MT mbox.lo -MD -MP -MF .deps/mbox.Tpo -c -o mbox.lo mbox.c; \ then mv -f .deps/mbox.Tpo .deps/mbox.Plo; else rm -f .deps/ mbox.Tpo; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I./unrar -I/usr/include -I/usr/ include -g -O2 -MT mbox.lo -MD -MP -MF .deps/mbox.Tpo -c mbox.c -fno- common -DPIC -o .libs/mbox.o mbox.c: In function `do_checkURLs': mbox.c:4104: error: `args' undeclared (first use in this function) mbox.c:4104: error: (Each undeclared identifier is reported only once mbox.c:4104: error: for each function it appears in.) make[2]: *** [mbox.lo] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Recommendations? --Paul. Trust no one; and be careful out there. -- Paul maddog WaterstraatInternet: [EMAIL PROTECTED] Department of Geologyhttp://www.geology.ucdavis.edu/~waterstraat University of California Voice: (530) 752-7421 One Shields Avenue FAX: (530) 752-0951 Davis, CA 95616-8605 USA If encryption is outlawed, then bayl bhgynjf jvyy hfr rapelcgvba. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] compiling fails 0.90.3 on Mac OS X Server 10.3.9
On 6/5/07 8:23 PM, Paul Waterstraat - UC Davis Geology wrote: running: ./configure --sysconfdir=/etc --with-user=clamav --with- group=clamav --enable-experimental seems to run OK except for an anomaly while checking curl: checking for __gmpz_init in -lgmp... yes checking for curl = 7.10.0... ./configure: line 1: pkg-config: command not found 7.10.2 checking for recvmsg... yes fwiw: curl --version curl 7.10.2 (powerpc-apple-darwin7.0) libcurl/7.10.2 OpenSSL/ 0.9.7l zlib/1.1.4 subsequent make runs for a bit, then: gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I./unrar -I/usr/include -I/ usr/include -g -O2 -MT blob.lo -MD -MP -MF .deps/blob.Tpo -c blob.c - o blob.o /dev/null 21 if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I./unrar -I/usr/include -I/usr/include -g -O2 -MT mbox.lo -MD -MP -MF .deps/mbox.Tpo -c -o mbox.lo mbox.c; \ then mv -f .deps/mbox.Tpo .deps/mbox.Plo; else rm -f .deps/ mbox.Tpo; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I./unrar -I/usr/include -I/usr/ include -g -O2 -MT mbox.lo -MD -MP -MF .deps/mbox.Tpo -c mbox.c -fno- common -DPIC -o .libs/mbox.o mbox.c: In function `do_checkURLs': mbox.c:4104: error: `args' undeclared (first use in this function) mbox.c:4104: error: (Each undeclared identifier is reported only once mbox.c:4104: error: for each function it appears in.) make[2]: *** [mbox.lo] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Recommendations? I haven't tried it yet, but a while back someone e-mailed me a solution. It's in the archives, but here it is again: Original Message Subject: Re: [Clamav-users] Compiling 0.90.1 on Mac OS X Server 10.3 Date: Wed, 2 May 2007 15:07:48 +0200 (SAST) From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Hi, as you have been the first one asking in the clamav-users list about a workaround: Craig Hockenberry found out what went wrong. https://wwws.clamav.net/bugzilla/show_bug.cgi?id=442 I removed every appearence of -arch i386 in the whole source. Once before and once after ./configure (I think the latter is enough). No problems to install and start 0.90.2 on Mac OS X Server 10.3 after this. As I am no member of the clamav-list, could you please forward Craigs solution to the others? Regards Frans -- - Dana Kashubeck Systems Manager Riemer Reporting Service Inc. http://www.riemer.com Phone: 440-835-2477 x. 125 Fax: 440-835-4594 - ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] compiling fails 0.90.3 on Mac OS X Server 10.3.9
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Paul Waterstraat wrote: running: ./configure --sysconfdir=/etc --with-user=clamav --with- group=clamav --enable-experimental seems to run OK except for an anomaly while checking curl: checking for __gmpz_init in -lgmp... yes checking for curl = 7.10.0... ./configure: line 1: pkg-config: - --^^ command not found [snip] Since pkg-config was not found, configure has no way to get the headers and libraries needed to compile with curl support (if any are needed, i.e. `pkg-config --libs curl`). Workarounds: - - Build w/o curl support; - - Add the libraries yourself, LIBS=... at the end of the configure invocation. - -- René Berber -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (Cygwin) iD8DBQFGZg1SL3NNweKTRgwRCBtTAKDxbhSt+ACVLwFNktMS+H9BWwHMKgCdGW9J Gjru3Zf0Byf5jnOf3s9j8n8= =oyQw -END PGP SIGNATURE- ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Error after upgrade
Christian, Did you try to recompile clamscan? Regarding freshclam, Are you sure you are running the new version? Maybe an old copy still exists... Check for broken links in /usr/lib/libclamav* I've seen similar issues in the past. Hope this helps. Regards, Jose --- Christian Campbell [EMAIL PROTECTED] wrote: I Upgraded from 0.88.6 to 0.90.3. I did a make uninstall of 0.88.6 and then built 0.90.3 from source. No errors during compile. When I run clamscan or freshclam, I'm receiving: clamscan: error while loading shared libraries: libclamav.so.2: cannot open shared object file: No such file or directory Not sure where to proceed from here. I'm on Fedora Core 6 (2.6.18-1.2849.fc6). Any help appreciated. Christian Christian Campbell Systems Engineer Bruegger's Enterprises Inc. Desk: 802-652-9270 Cell: 802-734-5023 Fax: 802-660-4034 Email: ccampbell at brueggers dot com PGP Public Key available via PGP keyservers or http://www2.brueggers.com/pgp/ccampbell.html We all know Linux is great... it does infinite loops in 5 seconds. --Linus Torvalds ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] daily.wmd trouble with 0.91rc1
--- jef moskot [EMAIL PROTECTED] wrote: On Mon, 4 Jun 2007, Noel Jones wrote: BTW, I'm *very* impressed with the db load speed improvements in 0.91rc1. I agree. The load speed for 0.92 had me considering rolling back to 0.88, but 0.91rc1 is a tremendous improvement. Thanks for a great service. I had trouble with 0.90.2; amavisd-new was unable to scan files and my mail queue started to grow very quickly, so I went back to 0.90.1. I applied patches to close the security vulnerabilities published recently with CAB, CHM y PDF files. If someone is interested a source rpm is available. I would like to test 0.91, but I will be busy for the next two weeks. Regards, Jose __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
Re: [Clamav-users] Freeze after reading db ?
Hi Marco, I don't use Zimbra, but I use postfix and amavis and I had the same experience with both 0.90.2 and 0.90.3. I had to go back to 0.90.1. I did a post on this before. Regards, Jose A. Diaz --- Marco Simioni [EMAIL PROTECTED] wrote: Hi, i'm using Clamav inside the Zimbra Collaboration Suite on ubuntu 6. Clamav version 0.90.2, on ubuntu 6.06.1 server. This behaviour happened with 0.90.3 too. I see that amavisd cannot connect to Clamav Jun 5 00:30:02 mailserver amavis[4348]: (04348-01) Checking: DkmOYJDUMtQR [80.247.70.64] ## - Jun 5 00:30:03 mailserver amavis[4348]: (04348-01) ClamAV-clamd: Can't connect to INET socket 127.0.0.1:3310: Connection refused, retrying (1) Jun 5 00:30:04 mailserver amavis[4348]: (04348-01) (!)ClamAV-clamd: Can't connect to INET socket 127.0.0.1:3310: Connection refused, retrying (2) Jun 5 00:30:07 mailserver zimbramon[20838]: 20838:info: 2007-06-05 00:30:06, QUEUE: 4 1 and looking at clamd.log i see these messages: Mon Jun 4 19:35:33 2007 - +++ Started at Mon Jun 4 19:35:33 2007 Mon Jun 4 19:35:33 2007 - clamd daemon 0.90.3 (OS: linux-gnu, ARCH: i386, CPU: i686) Mon Jun 4 19:35:33 2007 - Log file size limited to 20971520 bytes. Mon Jun 4 19:35:33 2007 - Reading databases from /opt/zimbra/clamav/db Mon Jun 4 19:37:12 2007 - +++ Started at Mon Jun 4 19:37:12 2007 Mon Jun 4 19:37:12 2007 - clamd daemon 0.90.3 (OS: linux-gnu, ARCH: i386, CPU: i686) Mon Jun 4 19:37:12 2007 - Log file size limited to 20971520 bytes. Mon Jun 4 19:37:12 2007 - Reading databases from /opt/zimbra/clamav/db Mon Jun 4 19:38:59 2007 - +++ Started at Mon Jun 4 19:38:59 2007 Mon Jun 4 19:38:59 2007 - clamd daemon 0.90.3 (OS: linux-gnu, ARCH: i386, CPU: i686) Mon Jun 4 19:38:59 2007 - Log file size limited to 20971520 bytes. Mon Jun 4 19:38:59 2007 - Reading databases from /opt/zimbra/clamav/db No errors and no crash messages. Privs are ok: drwxr-xr-x 2 zimbra zimbra4096 Jun 4 19:43 . drwxr-xr-x 9 zimbra zimbra4096 Jun 4 17:45 .. -rwxrwxr-- 1 zimbra zimbra 0 Jun 4 19:43 .dbLock -rw-r--r-- 1 zimbra zimbra 608128 Jun 4 19:12 daily.cvd -rw-r--r-- 1 zimbra zimbra 9351789 Jun 4 19:11 main.cvd -rw--- 1 zimbra zimbra 52 Jun 4 19:43 mirrors.dat And the file log is very small (fresh install) -rw-r--r-- 1 zimbra zimbra 21087 2007-06-05 00:34 /opt/zimbra/log/clamd.log And the process seems to be running, but frozen: [EMAIL PROTECTED]:~$ ps -ax | grep clamd Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html 20416 ?Rs 1:01 /opt/zimbra/clamav/sbin/clamd --config-file /opt/zimbra/conf/clamd.conf 20443 pts/0S+ 0:00 grep clamd I asked help on zimbra forums but still got no answers. Any idea? Thank you very much in advance, aNt1X ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html