Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
On 16.01.12 21:03:20, J Decker wrote: > On Mon, Jan 16, 2012 at 10:21 AM, John Drescher wrote: > > On Mon, Jan 16, 2012 at 1:15 PM, J Decker wrote: > >> On Mon, Jan 16, 2012 at 10:08 AM, Rolf Eike Beer wrote: > >>> J Decker wrote: > I just use > include_directories( ... ) > >>> > >>> This is right. > >>> > LINK_DIRECTORIES( ...} ) > >>> > >>> This is almost surely wrong. LINK_DIRECTORIES is only needed for very > >>> seldom > >>> special cases and only causes headache in all other cases. > >> > >> oh, what's the preferred method to specify the directory where the > >> library is then? > >> > > > > I believe the full path on the target_link_libraries. > > I think the problem with that is if built with gcc, then the full path > to the library is encoded and you can't load the library from the > library path, but only from where it was specified. Thats not correct. Runtime loading of libraries depends on the runtime linker used, which is ld on Linux usually. And that one finds libraries by checking its ld.so.conf, the LD_LIBRARY_PATH and a possibly-existing RPATH/RUNPATH setting in the executable. On Windows the runtime-linker looks through the PATH variable, in the directory where the executable is and at a few system-places. What you might refer to is CMake's support for RPATH/RUNPATH on Linux, but this can be turned off, tuned so the path is relative to the executable and the linker simply ignores that if it cannot find a library at the specified place and falls back to the other two options. Andreas -- Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Follow this link to subscribe/unsubscribe: http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
On Mon, Jan 16, 2012 at 10:21 AM, John Drescher wrote: > On Mon, Jan 16, 2012 at 1:15 PM, J Decker wrote: >> On Mon, Jan 16, 2012 at 10:08 AM, Rolf Eike Beer wrote: >>> J Decker wrote: I just use include_directories( ... ) >>> >>> This is right. >>> LINK_DIRECTORIES( ...} ) >>> >>> This is almost surely wrong. LINK_DIRECTORIES is only needed for very seldom >>> special cases and only causes headache in all other cases. >> >> oh, what's the preferred method to specify the directory where the >> library is then? >> > > I believe the full path on the target_link_libraries. I think the problem with that is if built with gcc, then the full path to the library is encoded and you can't load the library from the library path, but only from where it was specified. > > John -- Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Follow this link to subscribe/unsubscribe: http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
Thanks for support. Anything is working fine as described by you.
I've only checked the wrong solution folders ...
- Original Message -
From: e...@sf-mail.de
To: cmake@cmake.org
Date: 16.01.2012 21:01:37
Subject: Re: [CMake] How to add CMake includes and libraries to Visual Studio
Solution?
> hellho...@binary-revolution.org wrote:
>> Hmm this is strange, INCLUDE_DIRECTORIES is used but no effect.
>> I try to set:
>>
>> INCLUDE_DIRECTORIES("C:/binrev/development/boost/1.47/")
>
> Should be INCLUDE_DIRECTORIES(${Boost_INCLUDE_DIRS}), no? We have such a
> shiny
> FindBoost.cmake that does all the work for you ;)
Yes it should be and it is, this was only for simple test...
>> But the additional directory entry of my MSVC solution holds only
>> the default settings:
>>
>> $(VCInstallDir)include;$(VCInstallDir)atlmfc\include;$(WindowsSdkDir)include
>> ;$(FrameworkSDKDir)\include;
>>
>> Is there any chance that i could check if INCLUDE_DIRECORIES is
>> set correctly by CMake? Maybe the settings are truncated by visual
>> studio ..
>
> You need to use INCLUDE_DIRECTORIES() before doing the ADD_SUBDIRECTORY(),
> ADD_EXECUTABLE(), or ADD_LIBRARY() that should use it.
>
> Eike--
>
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the CMake FAQ at:
> http://www.cmake.org/Wiki/CMake_FAQ
>
> Follow this link to subscribe/unsubscribe:
> http://www.cmake.org/mailman/listinfo/cmake
--
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the CMake FAQ at:
http://www.cmake.org/Wiki/CMake_FAQ
Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
hellho...@binary-revolution.org wrote:
> Hmm this is strange, INCLUDE_DIRECTORIES is used but no effect.
> I try to set:
>
> INCLUDE_DIRECTORIES("C:/binrev/development/boost/1.47/")
Should be INCLUDE_DIRECTORIES(${Boost_INCLUDE_DIRS}), no? We have such a shiny
FindBoost.cmake that does all the work for you ;)
> But the additional directory entry of my MSVC solution holds only
> the default settings:
>
> $(VCInstallDir)include;$(VCInstallDir)atlmfc\include;$(WindowsSdkDir)include
> ;$(FrameworkSDKDir)\include;
>
> Is there any chance that i could check if INCLUDE_DIRECORIES is
> set correctly by CMake? Maybe the settings are truncated by visual
> studio ..
You need to use INCLUDE_DIRECTORIES() before doing the ADD_SUBDIRECTORY(),
ADD_EXECUTABLE(), or ADD_LIBRARY() that should use it.
Eike
signature.asc
Description: This is a digitally signed message part.
--
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the CMake FAQ at:
http://www.cmake.org/Wiki/CMake_FAQ
Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
Ahh ok. I see the failure. You are right, those files are added, but to an other tab at the solution, I think you checked C++ --> General --> Additional includes ... I've checkedd poperties -> VC++ Directories --> Include Directories. Is it possible to set any required value here (includes, libraries)? I've to set the libraries here or at the linker --> general --> additional libraries directory to get my code compilable ... - Original Message - From: d3c...@gmail.com To: e...@sf-mail.de Date: 16.01.2012 19:15:50 Subject: Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution? > On Mon, Jan 16, 2012 at 10:08 AM, Rolf Eike Beer wrote: >> J Decker wrote: >>> I just use >>> include_directories( ... ) >> >> This is right. >> >>> LINK_DIRECTORIES( ...} ) >> >> This is almost surely wrong. LINK_DIRECTORIES is only needed for very seldom >> special cases and only causes headache in all other cases. > > oh, what's the preferred method to specify the directory where the > library is then? > >> >> Eike >> -- >> >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the CMake FAQ at: >> http://www.cmake.org/Wiki/CMake_FAQ >> >> Follow this link to subscribe/unsubscribe: >> http://www.cmake.org/mailman/listinfo/cmake > -- > > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the CMake FAQ at: > http://www.cmake.org/Wiki/CMake_FAQ > > Follow this link to subscribe/unsubscribe: > http://www.cmake.org/mailman/listinfo/cmake -- Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Follow this link to subscribe/unsubscribe: http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
On Mon, Jan 16, 2012 at 2:44 PM, wrote:
> Hmm this is strange, INCLUDE_DIRECTORIES is used but no effect.
> I try to set:
>
> INCLUDE_DIRECTORIES("C:/binrev/development/boost/1.47/")
>
> But the additional directory entry of my MSVC solution holds only
> the default settings:
>
> $(VCInstallDir)include;$(VCInstallDir)atlmfc\include;$(WindowsSdkDir)include;$(FrameworkSDKDir)\include;
>
> Is there any chance that i could check if INCLUDE_DIRECORIES is
> set correctly by CMake? Maybe the settings are truncated by visual
> studio ..
>
Is the project being regenerated and reloaded after the change?
--
John M. Drescher
--
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the CMake FAQ at:
http://www.cmake.org/Wiki/CMake_FAQ
Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
Hmm this is strange, INCLUDE_DIRECTORIES is used but no effect.
I try to set:
INCLUDE_DIRECTORIES("C:/binrev/development/boost/1.47/")
But the additional directory entry of my MSVC solution holds only
the default settings:
$(VCInstallDir)include;$(VCInstallDir)atlmfc\include;$(WindowsSdkDir)include;$(FrameworkSDKDir)\include;
Is there any chance that i could check if INCLUDE_DIRECORIES is
set correctly by CMake? Maybe the settings are truncated by visual
studio ..
- Original Message -
From: d3c...@gmail.com
To: e...@sf-mail.de
Date: 16.01.2012 19:15:50
Subject: Re: [CMake] How to add CMake includes and libraries to Visual Studio
Solution?
> On Mon, Jan 16, 2012 at 10:08 AM, Rolf Eike Beer wrote:
>> J Decker wrote:
>>> I just use
>>> include_directories( ... )
>>
>> This is right.
>>
>>> LINK_DIRECTORIES( ...} )
>>
>> This is almost surely wrong. LINK_DIRECTORIES is only needed for very seldom
>> special cases and only causes headache in all other cases.
>
> oh, what's the preferred method to specify the directory where the
> library is then?
>
>>
>> Eike
>> --
>>
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the CMake FAQ at:
>> http://www.cmake.org/Wiki/CMake_FAQ
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.cmake.org/mailman/listinfo/cmake
> --
>
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the CMake FAQ at:
> http://www.cmake.org/Wiki/CMake_FAQ
>
> Follow this link to subscribe/unsubscribe:
> http://www.cmake.org/mailman/listinfo/cmake
--
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the CMake FAQ at:
http://www.cmake.org/Wiki/CMake_FAQ
Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
On Mon, Jan 16, 2012 at 1:15 PM, J Decker wrote: > On Mon, Jan 16, 2012 at 10:08 AM, Rolf Eike Beer wrote: >> J Decker wrote: >>> I just use >>> include_directories( ... ) >> >> This is right. >> >>> LINK_DIRECTORIES( ...} ) >> >> This is almost surely wrong. LINK_DIRECTORIES is only needed for very seldom >> special cases and only causes headache in all other cases. > > oh, what's the preferred method to specify the directory where the > library is then? > I believe the full path on the target_link_libraries. John -- Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Follow this link to subscribe/unsubscribe: http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
On Mon, Jan 16, 2012 at 10:08 AM, Rolf Eike Beer wrote: > J Decker wrote: >> I just use >> include_directories( ... ) > > This is right. > >> LINK_DIRECTORIES( ...} ) > > This is almost surely wrong. LINK_DIRECTORIES is only needed for very seldom > special cases and only causes headache in all other cases. oh, what's the preferred method to specify the directory where the library is then? > > Eike > -- > > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the CMake FAQ at: > http://www.cmake.org/Wiki/CMake_FAQ > > Follow this link to subscribe/unsubscribe: > http://www.cmake.org/mailman/listinfo/cmake -- Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Follow this link to subscribe/unsubscribe: http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
J Decker wrote: > I just use > include_directories( ... ) This is right. > LINK_DIRECTORIES( ...} ) This is almost surely wrong. LINK_DIRECTORIES is only needed for very seldom special cases and only causes headache in all other cases. Eike signature.asc Description: This is a digitally signed message part. -- Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Follow this link to subscribe/unsubscribe: http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
> Where did you define your INCLUDE_DIRECTORIES? I also tried to set an absolute > path instead of using the CMake list, same result. Nothing is set... For me this works as well. Define INCLUDE_DIRECTORIES anywhere above the ADD_EXECUTABLE or ADD_LIBRARY and visual studio will use it. -- John M. Drescher -- Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Follow this link to subscribe/unsubscribe: http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
Where did you define your INCLUDE_DIRECTORIES? I also tried to set an absolute
path instead of using the CMake list, same result. Nothing is set...
Here is the link to the complete cmake file:
http://binrevengine.svn.sourceforge.net/viewvc/binrevengine/modules/brGraphics/branches/hellhound-dev/CMakeLists.txt?revision=1039&view=markup
The additional cmake scripts could be found here:
http://binrevengine.svn.sourceforge.net/viewvc/binrevengine/data/cmake/
Original Message -
From: d3c...@gmail.com
To: hellho...@binary-revolution.org
Date: 16.01.2012 17:13:18
Subject: Re: [CMake] How to add CMake includes and libraries to Visual Studio
Solution?
> I just use
> include_directories( ... )
> LINK_DIRECTORIES( ...} )
>
> which works fine for specifying additional directories for that
> project and all sub projects included.
>
> On Mon, Jan 16, 2012 at 7:24 AM, wrote:
>> I use CMake to generate a Visual Studio 2010 project and solution file.
>> Actually I could set different settings, like warning level, incremental
>> building flag ect. from CMake. But I can't set additional includes and
>> libraries, listed in the VC++ Directory configuration tab.
>>
>> For GCC projects anything is running fine and I could compile and link the
>> project. For MSVC I've
>> to add those directories manually to perform a compile and link. But this is
>> stupid and boring...
>>
>> I tried to set the following CMake variables:
>>
>> INCLUDE_DIRECTORIES
>> LINK_DIRECTORIES
>> CMAKE_INCLUDE_PATH
>>
>> but nothing happend. If i open the project, the additional include directory
>> of the solution is always empty (only standard MSVE settings are given). I
>> tired to set this variables after executable creation, but this has also no
>> effect.
>>
>> I also tried to set the MSVC environment variables INCLUDE and PATH with
>> SET(ENV${PATH} "c:\test\...\") but this also has no effect. The directories
>> of the MSVC solution are empty.
>>
>> This is what i do directly in the header of the cmake file:
>>
>> CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
>> PROJECT(${MODULE_NAME})
>> IF (MSVC)
>> # Activate C++ exception handling
>> IF (NOT CMAKE_CXX_FLAGS MATCHES "/EHsc")
>> SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /EHsc")
>> ENDIF ()
>>
>> # Set Warning level always to 4
>> IF (CMAKE_CXX_FLAGS MATCHES "/W[0-4]")
>> string(REGEX REPLACE "/W[0-4]" "/W4" CMAKE_CXX_FLAGS
>> "${CMAKE_CXX_FLAGS}")
>> ELSE ()
>> set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4")
>> ENDIF ()
>>
>> #read path of dependency modules
>> file(READ "msvc.deps" MSVC_PROPERTIES)
>> STRING(REGEX REPLACE ";" ";" MSVC_PROPERTIES "${MSVC_PROPERTIES}")
>> STRING(REGEX REPLACE "\n" ";" MSVC_PROPERTIES "${MSVC_PROPERTIES}")
>>
>> FOREACH(e ${MSVC_PROPERTIES})
>> SET(INCLUDE ${INCLUDE} ${e})
>> MESSAGE(STATUS "[INFO]: Value ${e}")
>> ENDFOREACH(e)
>> INCLUDE_DIRECTORIES(${INCLUDE})
>> ENDIF ()
>>
>> In the .deps file I've added to path of my dependeny modules, line separated:
>>
>> c:\binrev\development\boost\1.47\includes
>> c:\binrev\repository\modules\brCore\trunk\includes
>>
>> Both are read successfully but couldn't be set as additional include
>> directory in my MSVC solution.
>>
>> Best regards, Hellhound
>>
>>
>>
>>
>> --
>>
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the CMake FAQ at:
>> http://www.cmake.org/Wiki/CMake_FAQ
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.cmake.org/mailman/listinfo/cmake
--
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the CMake FAQ at:
http://www.cmake.org/Wiki/CMake_FAQ
Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake
Re: [CMake] How to add CMake includes and libraries to Visual Studio Solution?
I just use
include_directories( ... )
LINK_DIRECTORIES( ...} )
which works fine for specifying additional directories for that
project and all sub projects included.
On Mon, Jan 16, 2012 at 7:24 AM, wrote:
> I use CMake to generate a Visual Studio 2010 project and solution file.
> Actually I could set different settings, like warning level, incremental
> building flag ect. from CMake. But I can't set additional includes and
> libraries, listed in the VC++ Directory configuration tab.
>
> For GCC projects anything is running fine and I could compile and link the
> project. For MSVC I've
> to add those directories manually to perform a compile and link. But this is
> stupid and boring...
>
> I tried to set the following CMake variables:
>
> INCLUDE_DIRECTORIES
> LINK_DIRECTORIES
> CMAKE_INCLUDE_PATH
>
> but nothing happend. If i open the project, the additional include directory
> of the solution is always empty (only standard MSVE settings are given). I
> tired to set this variables after executable creation, but this has also no
> effect.
>
> I also tried to set the MSVC environment variables INCLUDE and PATH with
> SET(ENV${PATH} "c:\test\...\") but this also has no effect. The directories
> of the MSVC solution are empty.
>
> This is what i do directly in the header of the cmake file:
>
> CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
> PROJECT(${MODULE_NAME})
> IF (MSVC)
> # Activate C++ exception handling
> IF (NOT CMAKE_CXX_FLAGS MATCHES "/EHsc")
> SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /EHsc")
> ENDIF ()
>
> # Set Warning level always to 4
> IF (CMAKE_CXX_FLAGS MATCHES "/W[0-4]")
> string(REGEX REPLACE "/W[0-4]" "/W4" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
> ELSE ()
> set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4")
> ENDIF ()
>
> #read path of dependency modules
> file(READ "msvc.deps" MSVC_PROPERTIES)
> STRING(REGEX REPLACE ";" ";" MSVC_PROPERTIES "${MSVC_PROPERTIES}")
> STRING(REGEX REPLACE "\n" ";" MSVC_PROPERTIES "${MSVC_PROPERTIES}")
>
> FOREACH(e ${MSVC_PROPERTIES})
> SET(INCLUDE ${INCLUDE} ${e})
> MESSAGE(STATUS "[INFO]: Value ${e}")
> ENDFOREACH(e)
> INCLUDE_DIRECTORIES(${INCLUDE})
> ENDIF ()
>
> In the .deps file I've added to path of my dependeny modules, line separated:
>
> c:\binrev\development\boost\1.47\includes
> c:\binrev\repository\modules\brCore\trunk\includes
>
> Both are read successfully but couldn't be set as additional include
> directory in my MSVC solution.
>
> Best regards, Hellhound
>
>
>
>
> --
>
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the CMake FAQ at:
> http://www.cmake.org/Wiki/CMake_FAQ
>
> Follow this link to subscribe/unsubscribe:
> http://www.cmake.org/mailman/listinfo/cmake
--
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the CMake FAQ at:
http://www.cmake.org/Wiki/CMake_FAQ
Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake
[CMake] How to add CMake includes and libraries to Visual Studio Solution?
I use CMake to generate a Visual Studio 2010 project and solution file.
Actually I could set different settings, like warning level, incremental
building flag ect. from CMake. But I can't set additional includes and
libraries, listed in the VC++ Directory configuration tab.
For GCC projects anything is running fine and I could compile and link the
project. For MSVC I've
to add those directories manually to perform a compile and link. But this is
stupid and boring...
I tried to set the following CMake variables:
INCLUDE_DIRECTORIES
LINK_DIRECTORIES
CMAKE_INCLUDE_PATH
but nothing happend. If i open the project, the additional include directory of
the solution is always empty (only standard MSVE settings are given). I tired
to set this variables after executable creation, but this has also no effect.
I also tried to set the MSVC environment variables INCLUDE and PATH with
SET(ENV${PATH} "c:\test\...\") but this also has no effect. The directories of
the MSVC solution are empty.
This is what i do directly in the header of the cmake file:
CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
PROJECT(${MODULE_NAME})
IF (MSVC)
# Activate C++ exception handling
IF (NOT CMAKE_CXX_FLAGS MATCHES "/EHsc")
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /EHsc")
ENDIF ()
# Set Warning level always to 4
IF (CMAKE_CXX_FLAGS MATCHES "/W[0-4]")
string(REGEX REPLACE "/W[0-4]" "/W4" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
ELSE ()
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4")
ENDIF ()
#read path of dependency modules
file(READ "msvc.deps" MSVC_PROPERTIES)
STRING(REGEX REPLACE ";" ";" MSVC_PROPERTIES "${MSVC_PROPERTIES}")
STRING(REGEX REPLACE "\n" ";" MSVC_PROPERTIES "${MSVC_PROPERTIES}")
FOREACH(e ${MSVC_PROPERTIES})
SET(INCLUDE ${INCLUDE} ${e})
MESSAGE(STATUS "[INFO]: Value ${e}")
ENDFOREACH(e)
INCLUDE_DIRECTORIES(${INCLUDE})
ENDIF ()
In the .deps file I've added to path of my dependeny modules, line separated:
c:\binrev\development\boost\1.47\includes
c:\binrev\repository\modules\brCore\trunk\includes
Both are read successfully but couldn't be set as additional include directory
in my MSVC solution.
Best regards, Hellhound
--
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the CMake FAQ at:
http://www.cmake.org/Wiki/CMake_FAQ
Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake
