Re: [CMake] LOCATION target property, generator expressions
>> A strategy I've seen used before is to arrange for all the build outputs (libraries, executables) to end up in a directory structure that mimics the installed layout. This can be helpful if the applications expect to find things at some specific location relative to themselves at run time. We're doing this already, but this doesn't solve the problem. The project is a collection of libraries and binaries and until now (i.e. using LOCATION), we could compute the relative paths from binary to its libraries in the makefiles and append to rpath in linker flags (i.e. see above) On Mon, Oct 8, 2018 at 2:31 PM Craig Scott wrote: > > > On Tue, Oct 9, 2018 at 8:18 AM Hendrik Greving < > hendrik.greving@gmail.com> wrote: > >> Is there a good place to record the feature request (- if ack'd -)? >> gitlab issue? >> Thanks! >> > > Gitlab is the place to record feature requests (and to check for existing > ones): > > https://gitlab.kitware.com/cmake/cmake > > Relocating build trees is not supported in general by CMake, it embeds > absolute paths in various places. I doubt this is likely to change. If you > want to relocate an *install* directory, you should either: > >- Ensure the installed products themselves are relocatable (which is a >good goal in itself), or >- Simply install again to the new location rather than move the >installed directory. > > A strategy I've seen used before is to arrange for all the build outputs > (libraries, executables) to end up in a directory structure that mimics the > installed layout. This can be helpful if the applications expect to find > things at some specific location relative to themselves at run time. It can > be a bit finicky and doesn't play well with multi-config generators like > Xcode or Visual Studio (due to them adding a config-specific directory to > the directory structure), but maybe it is an option to consider (I'd > personally avoid it if I can though). > > Not sure if it is relevant here, but there has also been some recent > discussions going on regarding the use of relative RPATH in the build tree, > but that's more to do with making builds reproducible: > > https://gitlab.kitware.com/cmake/cmake/issues/18413 > > > > >> >> On Thu, Oct 4, 2018 at 2:24 PM Hendrik Greving < >> hendrik.greving@gmail.com> wrote: >> >>> Hi, we would like to.. >>> (*) keep modularity and flexibility (i.e. avoid hard-coding relative >>> paths) w/ binaries and libraries in build tree at flexible locations. >>> (*) update rpath in the target binary based on relative paths from >>> $ORIGIN, such that a user or any other script can move the build (and later >>> install) tree. >>> The project (DynamoRIO) has multiple libraries and multiple target >>> binaries such that the CMAKE* solution (and thanks for that in any case) >>> above would not work for all of them. LOCATION and file(RELATIVE..) >>> provided that functionality. With CMP0026 and LOCATION going away, there >>> seems to be no substitute for this, even w/ 3.13 it sounds like we still >>> couldn't compute the relative path(s). Would it be feasible for me to put >>> in a feature request in cmake? >>> >>> >>> On Wed, Oct 3, 2018 at 11:28 PM Hendrik Sattler >>> wrote: >>> Hi, You can use the following cmake snippet right below the project() command to add proper RPATH values: include ( GNUInstallDirs ) if ( CMAKE_SYSTEM_NAME STREQUAL "Linux" ) list ( APPEND CMAKE_INSTALL_RPATH "\$ORIGIN/../${CMAKE_INSTALL_LIBDIR}" ) endif ( CMAKE_SYSTEM_NAME STREQUAL "Linux" ) set ( CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE ) This assumes, libraries are installed to CMAKE_INSTALL_LIBDIR and programs to CMAKE_INSTALL_BINDIR. Additionally you may add the following line to disable a change in the binary files during install target run: set ( CMAKE_BUILD_WITH_INSTALL_RPATH ON ) The latter might be useful when splitting of debug symbols on ELF platforms in post-build. However, it disables running the binaries in the build tree. CMake supports PDB files but split dbgsym file are (strangely) not supported out-of-the-box. HS Zitat von Hendrik Greving : > By the way, the new generator expression support in 3.13, is this for > LINK_FLAGS or LINK_OPTIONS. And regardless of the former, will it be > possible to compute a relative path based on generator expressions, i.e. > file(RELATIVE $ $)? > > On Thu, Sep 27, 2018 at 5:03 PM Hendrik Greving < > hendrik.greving@gmail.com> wrote: > >> Thanks. Ok one step back. What we want is to have the same relative path >> from binary/executable to linked library in build and install tree (which >> we assume is the same for us). Looks like by default, e.g. cmake 3.9, puts >> in an absolute path. The current (c-)makefiles compute the relat
Re: [CMake] LOCATION target property, generator expressions
On Tue, Oct 9, 2018 at 8:18 AM Hendrik Greving < hendrik.greving@gmail.com> wrote: > Is there a good place to record the feature request (- if ack'd -)? gitlab > issue? > Thanks! > Gitlab is the place to record feature requests (and to check for existing ones): https://gitlab.kitware.com/cmake/cmake Relocating build trees is not supported in general by CMake, it embeds absolute paths in various places. I doubt this is likely to change. If you want to relocate an *install* directory, you should either: - Ensure the installed products themselves are relocatable (which is a good goal in itself), or - Simply install again to the new location rather than move the installed directory. A strategy I've seen used before is to arrange for all the build outputs (libraries, executables) to end up in a directory structure that mimics the installed layout. This can be helpful if the applications expect to find things at some specific location relative to themselves at run time. It can be a bit finicky and doesn't play well with multi-config generators like Xcode or Visual Studio (due to them adding a config-specific directory to the directory structure), but maybe it is an option to consider (I'd personally avoid it if I can though). Not sure if it is relevant here, but there has also been some recent discussions going on regarding the use of relative RPATH in the build tree, but that's more to do with making builds reproducible: https://gitlab.kitware.com/cmake/cmake/issues/18413 > > On Thu, Oct 4, 2018 at 2:24 PM Hendrik Greving < > hendrik.greving@gmail.com> wrote: > >> Hi, we would like to.. >> (*) keep modularity and flexibility (i.e. avoid hard-coding relative >> paths) w/ binaries and libraries in build tree at flexible locations. >> (*) update rpath in the target binary based on relative paths from >> $ORIGIN, such that a user or any other script can move the build (and later >> install) tree. >> The project (DynamoRIO) has multiple libraries and multiple target >> binaries such that the CMAKE* solution (and thanks for that in any case) >> above would not work for all of them. LOCATION and file(RELATIVE..) >> provided that functionality. With CMP0026 and LOCATION going away, there >> seems to be no substitute for this, even w/ 3.13 it sounds like we still >> couldn't compute the relative path(s). Would it be feasible for me to put >> in a feature request in cmake? >> >> >> On Wed, Oct 3, 2018 at 11:28 PM Hendrik Sattler >> wrote: >> >>> >>> Hi, >>> >>> You can use the following cmake snippet right below the project() >>> command to add proper RPATH values: >>>include ( GNUInstallDirs ) >>>if ( CMAKE_SYSTEM_NAME STREQUAL "Linux" ) >>> list ( APPEND CMAKE_INSTALL_RPATH >>> "\$ORIGIN/../${CMAKE_INSTALL_LIBDIR}" ) >>>endif ( CMAKE_SYSTEM_NAME STREQUAL "Linux" ) >>>set ( CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE ) >>> >>> This assumes, libraries are installed to CMAKE_INSTALL_LIBDIR and >>> programs to CMAKE_INSTALL_BINDIR. >>> Additionally you may add the following line to disable a change in the >>> binary files during install target run: >>>set ( CMAKE_BUILD_WITH_INSTALL_RPATH ON ) >>> >>> >>> The latter might be useful when splitting of debug symbols on ELF >>> platforms in post-build. However, it disables running the binaries in >>> the build tree. >>> >>> >>> CMake supports PDB files but split dbgsym file are (strangely) not >>> supported out-of-the-box. >>> >>> HS >>> >>> >>> Zitat von Hendrik Greving : >>> >>> > By the way, the new generator expression support in 3.13, is this for >>> > LINK_FLAGS or LINK_OPTIONS. And regardless of the former, will it be >>> > possible to compute a relative path based on generator expressions, >>> i.e. >>> > file(RELATIVE $ >>> $)? >>> > >>> > On Thu, Sep 27, 2018 at 5:03 PM Hendrik Greving < >>> > hendrik.greving@gmail.com> wrote: >>> > >>> >> Thanks. Ok one step back. What we want is to have the same relative >>> path >>> >> from binary/executable to linked library in build and install tree >>> (which >>> >> we assume is the same for us). Looks like by default, e.g. cmake 3.9, >>> puts >>> >> in an absolute path. The current (c-)makefiles compute the relative >>> part of >>> >> an executable -> library by using LOCATION and add this to >>> >> -Wl,-rpath=$ORIGIN/[relative part]. We want to do the same w/o >>> LOCATION >>> >> (i.e. resolving CMP0026) >>> >> >>> >> On Thu, Sep 27, 2018 at 7:29 AM Brad King >>> wrote: >>> >> >>> >>> On 09/26/2018 10:23 AM, Hendrik Greving wrote: >>> >>> > Is there any way before 3.13 to achieve what I need? Right now we >>> >>> > modify LINK_FLAGS based on something that is computed with values >>> >>> > from LOCATION. >>> >>> [snip] >>> >>> > our cmake setup is using LOCATION property for two targets to >>> compute >>> >>> > a relative path from these two, and adds this to LINK_FLAGS >>> >>> > (for rpath, but irrelevant in this context). >>> >>> >>> >>> To at least see if 3.13 will su
Re: [CMake] LOCATION target property, generator expressions
Is there a good place to record the feature request (- if ack'd -)? gitlab issue? Thanks! On Thu, Oct 4, 2018 at 2:24 PM Hendrik Greving < hendrik.greving@gmail.com> wrote: > Hi, we would like to.. > (*) keep modularity and flexibility (i.e. avoid hard-coding relative > paths) w/ binaries and libraries in build tree at flexible locations. > (*) update rpath in the target binary based on relative paths from > $ORIGIN, such that a user or any other script can move the build (and later > install) tree. > The project (DynamoRIO) has multiple libraries and multiple target > binaries such that the CMAKE* solution (and thanks for that in any case) > above would not work for all of them. LOCATION and file(RELATIVE..) > provided that functionality. With CMP0026 and LOCATION going away, there > seems to be no substitute for this, even w/ 3.13 it sounds like we still > couldn't compute the relative path(s). Would it be feasible for me to put > in a feature request in cmake? > > > On Wed, Oct 3, 2018 at 11:28 PM Hendrik Sattler > wrote: > >> >> Hi, >> >> You can use the following cmake snippet right below the project() >> command to add proper RPATH values: >>include ( GNUInstallDirs ) >>if ( CMAKE_SYSTEM_NAME STREQUAL "Linux" ) >> list ( APPEND CMAKE_INSTALL_RPATH >> "\$ORIGIN/../${CMAKE_INSTALL_LIBDIR}" ) >>endif ( CMAKE_SYSTEM_NAME STREQUAL "Linux" ) >>set ( CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE ) >> >> This assumes, libraries are installed to CMAKE_INSTALL_LIBDIR and >> programs to CMAKE_INSTALL_BINDIR. >> Additionally you may add the following line to disable a change in the >> binary files during install target run: >>set ( CMAKE_BUILD_WITH_INSTALL_RPATH ON ) >> >> >> The latter might be useful when splitting of debug symbols on ELF >> platforms in post-build. However, it disables running the binaries in >> the build tree. >> >> >> CMake supports PDB files but split dbgsym file are (strangely) not >> supported out-of-the-box. >> >> HS >> >> >> Zitat von Hendrik Greving : >> >> > By the way, the new generator expression support in 3.13, is this for >> > LINK_FLAGS or LINK_OPTIONS. And regardless of the former, will it be >> > possible to compute a relative path based on generator expressions, i.e. >> > file(RELATIVE $ >> $)? >> > >> > On Thu, Sep 27, 2018 at 5:03 PM Hendrik Greving < >> > hendrik.greving@gmail.com> wrote: >> > >> >> Thanks. Ok one step back. What we want is to have the same relative >> path >> >> from binary/executable to linked library in build and install tree >> (which >> >> we assume is the same for us). Looks like by default, e.g. cmake 3.9, >> puts >> >> in an absolute path. The current (c-)makefiles compute the relative >> part of >> >> an executable -> library by using LOCATION and add this to >> >> -Wl,-rpath=$ORIGIN/[relative part]. We want to do the same w/o LOCATION >> >> (i.e. resolving CMP0026) >> >> >> >> On Thu, Sep 27, 2018 at 7:29 AM Brad King >> wrote: >> >> >> >>> On 09/26/2018 10:23 AM, Hendrik Greving wrote: >> >>> > Is there any way before 3.13 to achieve what I need? Right now we >> >>> > modify LINK_FLAGS based on something that is computed with values >> >>> > from LOCATION. >> >>> [snip] >> >>> > our cmake setup is using LOCATION property for two targets to >> compute >> >>> > a relative path from these two, and adds this to LINK_FLAGS >> >>> > (for rpath, but irrelevant in this context). >> >>> >> >>> To at least see if 3.13 will support your use case, you could >> >>> try a nightly binary from here: >> >>> >> >>> https://cmake.org/files/dev/?C=M;O=D >> >>> >> >>> Use `$/..` to refer to a path relative >> >>> to the target file location. >> >>> >> >>> I've never seen a need to adjust link flags based on the target >> >>> location. CMake has several features for RPATH support. What >> >>> are you really trying to do? >> >>> >> >>> -Brad >> >>> >> >> >> >> >> >> -- >> >> Powered by www.kitware.com >> >> Please keep messages on-topic and check the CMake FAQ at: >> http://www.cmake.org/Wiki/CMake_FAQ >> >> Kitware offers various services to support the CMake community. For more >> information on each offering, please visit: >> >> CMake Support: http://cmake.org/cmake/help/support.html >> CMake Consulting: http://cmake.org/cmake/help/consulting.html >> CMake Training Courses: http://cmake.org/cmake/help/training.html >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Follow this link to subscribe/unsubscribe: >> https://cmake.org/mailman/listinfo/cmake >> > -- Powered by www.kitware.com Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Kitware offers various services to support the CMake community. For more information on each offering, please visit: CMake Support: http://cmake.org/cmake/help/support.html CMake Consulting: http://cmake.org/cmake/help/consulting.html CMake Training Courses: http://cmake.org/cmake/help/training
Re: [CMake] LOCATION target property, generator expressions
Hi, we would like to.. (*) keep modularity and flexibility (i.e. avoid hard-coding relative paths) w/ binaries and libraries in build tree at flexible locations. (*) update rpath in the target binary based on relative paths from $ORIGIN, such that a user or any other script can move the build (and later install) tree. The project (DynamoRIO) has multiple libraries and multiple target binaries such that the CMAKE* solution (and thanks for that in any case) above would not work for all of them. LOCATION and file(RELATIVE..) provided that functionality. With CMP0026 and LOCATION going away, there seems to be no substitute for this, even w/ 3.13 it sounds like we still couldn't compute the relative path(s). Would it be feasible for me to put in a feature request in cmake? On Wed, Oct 3, 2018 at 11:28 PM Hendrik Sattler wrote: > > Hi, > > You can use the following cmake snippet right below the project() > command to add proper RPATH values: >include ( GNUInstallDirs ) >if ( CMAKE_SYSTEM_NAME STREQUAL "Linux" ) > list ( APPEND CMAKE_INSTALL_RPATH > "\$ORIGIN/../${CMAKE_INSTALL_LIBDIR}" ) >endif ( CMAKE_SYSTEM_NAME STREQUAL "Linux" ) >set ( CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE ) > > This assumes, libraries are installed to CMAKE_INSTALL_LIBDIR and > programs to CMAKE_INSTALL_BINDIR. > Additionally you may add the following line to disable a change in the > binary files during install target run: >set ( CMAKE_BUILD_WITH_INSTALL_RPATH ON ) > > > The latter might be useful when splitting of debug symbols on ELF > platforms in post-build. However, it disables running the binaries in > the build tree. > > > CMake supports PDB files but split dbgsym file are (strangely) not > supported out-of-the-box. > > HS > > > Zitat von Hendrik Greving : > > > By the way, the new generator expression support in 3.13, is this for > > LINK_FLAGS or LINK_OPTIONS. And regardless of the former, will it be > > possible to compute a relative path based on generator expressions, i.e. > > file(RELATIVE $ > $)? > > > > On Thu, Sep 27, 2018 at 5:03 PM Hendrik Greving < > > hendrik.greving@gmail.com> wrote: > > > >> Thanks. Ok one step back. What we want is to have the same relative path > >> from binary/executable to linked library in build and install tree > (which > >> we assume is the same for us). Looks like by default, e.g. cmake 3.9, > puts > >> in an absolute path. The current (c-)makefiles compute the relative > part of > >> an executable -> library by using LOCATION and add this to > >> -Wl,-rpath=$ORIGIN/[relative part]. We want to do the same w/o LOCATION > >> (i.e. resolving CMP0026) > >> > >> On Thu, Sep 27, 2018 at 7:29 AM Brad King > wrote: > >> > >>> On 09/26/2018 10:23 AM, Hendrik Greving wrote: > >>> > Is there any way before 3.13 to achieve what I need? Right now we > >>> > modify LINK_FLAGS based on something that is computed with values > >>> > from LOCATION. > >>> [snip] > >>> > our cmake setup is using LOCATION property for two targets to compute > >>> > a relative path from these two, and adds this to LINK_FLAGS > >>> > (for rpath, but irrelevant in this context). > >>> > >>> To at least see if 3.13 will support your use case, you could > >>> try a nightly binary from here: > >>> > >>> https://cmake.org/files/dev/?C=M;O=D > >>> > >>> Use `$/..` to refer to a path relative > >>> to the target file location. > >>> > >>> I've never seen a need to adjust link flags based on the target > >>> location. CMake has several features for RPATH support. What > >>> are you really trying to do? > >>> > >>> -Brad > >>> > >> > > > > -- > > Powered by www.kitware.com > > Please keep messages on-topic and check the CMake FAQ at: > http://www.cmake.org/Wiki/CMake_FAQ > > Kitware offers various services to support the CMake community. For more > information on each offering, please visit: > > CMake Support: http://cmake.org/cmake/help/support.html > CMake Consulting: http://cmake.org/cmake/help/consulting.html > CMake Training Courses: http://cmake.org/cmake/help/training.html > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Follow this link to subscribe/unsubscribe: > https://cmake.org/mailman/listinfo/cmake > -- Powered by www.kitware.com Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Kitware offers various services to support the CMake community. For more information on each offering, please visit: CMake Support: http://cmake.org/cmake/help/support.html CMake Consulting: http://cmake.org/cmake/help/consulting.html CMake Training Courses: http://cmake.org/cmake/help/training.html Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Follow this link to subscribe/unsubscribe: https://cmake.org/mailman/listinfo/cmake
Re: [CMake] LOCATION target property, generator expressions
Hi, You can use the following cmake snippet right below the project() command to add proper RPATH values: include ( GNUInstallDirs ) if ( CMAKE_SYSTEM_NAME STREQUAL "Linux" ) list ( APPEND CMAKE_INSTALL_RPATH "\$ORIGIN/../${CMAKE_INSTALL_LIBDIR}" ) endif ( CMAKE_SYSTEM_NAME STREQUAL "Linux" ) set ( CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE ) This assumes, libraries are installed to CMAKE_INSTALL_LIBDIR and programs to CMAKE_INSTALL_BINDIR. Additionally you may add the following line to disable a change in the binary files during install target run: set ( CMAKE_BUILD_WITH_INSTALL_RPATH ON ) The latter might be useful when splitting of debug symbols on ELF platforms in post-build. However, it disables running the binaries in the build tree. CMake supports PDB files but split dbgsym file are (strangely) not supported out-of-the-box. HS Zitat von Hendrik Greving : By the way, the new generator expression support in 3.13, is this for LINK_FLAGS or LINK_OPTIONS. And regardless of the former, will it be possible to compute a relative path based on generator expressions, i.e. file(RELATIVE $ $)? On Thu, Sep 27, 2018 at 5:03 PM Hendrik Greving < hendrik.greving@gmail.com> wrote: Thanks. Ok one step back. What we want is to have the same relative path from binary/executable to linked library in build and install tree (which we assume is the same for us). Looks like by default, e.g. cmake 3.9, puts in an absolute path. The current (c-)makefiles compute the relative part of an executable -> library by using LOCATION and add this to -Wl,-rpath=$ORIGIN/[relative part]. We want to do the same w/o LOCATION (i.e. resolving CMP0026) On Thu, Sep 27, 2018 at 7:29 AM Brad King wrote: On 09/26/2018 10:23 AM, Hendrik Greving wrote: > Is there any way before 3.13 to achieve what I need? Right now we > modify LINK_FLAGS based on something that is computed with values > from LOCATION. [snip] > our cmake setup is using LOCATION property for two targets to compute > a relative path from these two, and adds this to LINK_FLAGS > (for rpath, but irrelevant in this context). To at least see if 3.13 will support your use case, you could try a nightly binary from here: https://cmake.org/files/dev/?C=M;O=D Use `$/..` to refer to a path relative to the target file location. I've never seen a need to adjust link flags based on the target location. CMake has several features for RPATH support. What are you really trying to do? -Brad -- Powered by www.kitware.com Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Kitware offers various services to support the CMake community. For more information on each offering, please visit: CMake Support: http://cmake.org/cmake/help/support.html CMake Consulting: http://cmake.org/cmake/help/consulting.html CMake Training Courses: http://cmake.org/cmake/help/training.html Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Follow this link to subscribe/unsubscribe: https://cmake.org/mailman/listinfo/cmake
Re: [CMake] LOCATION target property, generator expressions
On 10/02/2018 01:12 PM, Hendrik Greving wrote: > By the way, the new generator expression support in 3.13, is this for > LINK_FLAGS or LINK_OPTIONS. LINK_OPTIONS, though it should be used through target_link_options. > And regardless of the former, will it be possible to compute a relative > path based on generator expressions, i.e. > file(RELATIVE $ $)? No, that level of logic is not possible with generator expressions. I really don't think you should need to do that though. CMake handles RPATH in the build tree automatically. In the install tree you can set INSTALL_RPATH to whatever relative layout of files you use in your install rules, which you also control. If that is not sufficient then please explain your use case in more detail. I've never seen this requirement before. -Brad -- Powered by www.kitware.com Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Kitware offers various services to support the CMake community. For more information on each offering, please visit: CMake Support: http://cmake.org/cmake/help/support.html CMake Consulting: http://cmake.org/cmake/help/consulting.html CMake Training Courses: http://cmake.org/cmake/help/training.html Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Follow this link to subscribe/unsubscribe: https://cmake.org/mailman/listinfo/cmake
Re: [CMake] LOCATION target property, generator expressions
By the way, the new generator expression support in 3.13, is this for LINK_FLAGS or LINK_OPTIONS. And regardless of the former, will it be possible to compute a relative path based on generator expressions, i.e. file(RELATIVE $ $)? On Thu, Sep 27, 2018 at 5:03 PM Hendrik Greving < hendrik.greving@gmail.com> wrote: > Thanks. Ok one step back. What we want is to have the same relative path > from binary/executable to linked library in build and install tree (which > we assume is the same for us). Looks like by default, e.g. cmake 3.9, puts > in an absolute path. The current (c-)makefiles compute the relative part of > an executable -> library by using LOCATION and add this to > -Wl,-rpath=$ORIGIN/[relative part]. We want to do the same w/o LOCATION > (i.e. resolving CMP0026) > > On Thu, Sep 27, 2018 at 7:29 AM Brad King wrote: > >> On 09/26/2018 10:23 AM, Hendrik Greving wrote: >> > Is there any way before 3.13 to achieve what I need? Right now we >> > modify LINK_FLAGS based on something that is computed with values >> > from LOCATION. >> [snip] >> > our cmake setup is using LOCATION property for two targets to compute >> > a relative path from these two, and adds this to LINK_FLAGS >> > (for rpath, but irrelevant in this context). >> >> To at least see if 3.13 will support your use case, you could >> try a nightly binary from here: >> >> https://cmake.org/files/dev/?C=M;O=D >> >> Use `$/..` to refer to a path relative >> to the target file location. >> >> I've never seen a need to adjust link flags based on the target >> location. CMake has several features for RPATH support. What >> are you really trying to do? >> >> -Brad >> > -- Powered by www.kitware.com Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Kitware offers various services to support the CMake community. For more information on each offering, please visit: CMake Support: http://cmake.org/cmake/help/support.html CMake Consulting: http://cmake.org/cmake/help/consulting.html CMake Training Courses: http://cmake.org/cmake/help/training.html Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Follow this link to subscribe/unsubscribe: https://cmake.org/mailman/listinfo/cmake
Re: [CMake] LOCATION target property, generator expressions
Thanks. Ok one step back. What we want is to have the same relative path from binary/executable to linked library in build and install tree (which we assume is the same for us). Looks like by default, e.g. cmake 3.9, puts in an absolute path. The current (c-)makefiles compute the relative part of an executable -> library by using LOCATION and add this to -Wl,-rpath=$ORIGIN/[relative part]. We want to do the same w/o LOCATION (i.e. resolving CMP0026) On Thu, Sep 27, 2018 at 7:29 AM Brad King wrote: > On 09/26/2018 10:23 AM, Hendrik Greving wrote: > > Is there any way before 3.13 to achieve what I need? Right now we > > modify LINK_FLAGS based on something that is computed with values > > from LOCATION. > [snip] > > our cmake setup is using LOCATION property for two targets to compute > > a relative path from these two, and adds this to LINK_FLAGS > > (for rpath, but irrelevant in this context). > > To at least see if 3.13 will support your use case, you could > try a nightly binary from here: > > https://cmake.org/files/dev/?C=M;O=D > > Use `$/..` to refer to a path relative > to the target file location. > > I've never seen a need to adjust link flags based on the target > location. CMake has several features for RPATH support. What > are you really trying to do? > > -Brad > -- Powered by www.kitware.com Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Kitware offers various services to support the CMake community. For more information on each offering, please visit: CMake Support: http://cmake.org/cmake/help/support.html CMake Consulting: http://cmake.org/cmake/help/consulting.html CMake Training Courses: http://cmake.org/cmake/help/training.html Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Follow this link to subscribe/unsubscribe: https://cmake.org/mailman/listinfo/cmake
Re: [CMake] LOCATION target property, generator expressions
On 09/26/2018 10:23 AM, Hendrik Greving wrote: > Is there any way before 3.13 to achieve what I need? Right now we > modify LINK_FLAGS based on something that is computed with values > from LOCATION. [snip] > our cmake setup is using LOCATION property for two targets to compute > a relative path from these two, and adds this to LINK_FLAGS > (for rpath, but irrelevant in this context). To at least see if 3.13 will support your use case, you could try a nightly binary from here: https://cmake.org/files/dev/?C=M;O=D Use `$/..` to refer to a path relative to the target file location. I've never seen a need to adjust link flags based on the target location. CMake has several features for RPATH support. What are you really trying to do? -Brad -- Powered by www.kitware.com Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Kitware offers various services to support the CMake community. For more information on each offering, please visit: CMake Support: http://cmake.org/cmake/help/support.html CMake Consulting: http://cmake.org/cmake/help/consulting.html CMake Training Courses: http://cmake.org/cmake/help/training.html Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Follow this link to subscribe/unsubscribe: https://cmake.org/mailman/listinfo/cmake
Re: [CMake] LOCATION target property, generator expressions
Is there any way before 3.13 to achieve what I need? Right now we modify LINK_FLAGS based on something that is computed with values from LOCATION. For CMP0026, I'd like to get rid of LOCATION. As pointed out earlier, unclear how this would work e.g. by using file(GENERATE.. in this case. Thanks in advance On Tue, Sep 25, 2018, 10:45 PM Marc CHEVRIER wrote: > LINK_FLAGS does not support expressions. > However, property LINK_OPTIONS (and INTERFACE counterpart) support > generator expressions. These properties are new for version 3.13 which will > be available soon (probably next month). > Le mer. 26 sept. 2018 à 05:21, Hendrik Greving < > hendrik.greving@gmail.com> a écrit : > >> Hello, >> >> our cmake setup is using LOCATION property for two targets to compute a >> relative path from these two, and adds this to LINK_FLAGS (for rpath, but >> irrelevant in this context). In order to update our cmake w.r.t. CMP0026, I >> don't know how to get LINK_FLAGS consume a generator expression. In other >> cases file(GENERATE.. writing a set(var TARGET_FILE..) into a file, and >> reading the file to obtain 'var' worked. Thanks in advance! >> -- >> >> Powered by www.kitware.com >> >> Please keep messages on-topic and check the CMake FAQ at: >> http://www.cmake.org/Wiki/CMake_FAQ >> >> Kitware offers various services to support the CMake community. For more >> information on each offering, please visit: >> >> CMake Support: http://cmake.org/cmake/help/support.html >> CMake Consulting: http://cmake.org/cmake/help/consulting.html >> CMake Training Courses: http://cmake.org/cmake/help/training.html >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Follow this link to subscribe/unsubscribe: >> https://cmake.org/mailman/listinfo/cmake >> > -- Powered by www.kitware.com Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Kitware offers various services to support the CMake community. For more information on each offering, please visit: CMake Support: http://cmake.org/cmake/help/support.html CMake Consulting: http://cmake.org/cmake/help/consulting.html CMake Training Courses: http://cmake.org/cmake/help/training.html Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Follow this link to subscribe/unsubscribe: https://cmake.org/mailman/listinfo/cmake
Re: [CMake] LOCATION target property, generator expressions
LINK_FLAGS does not support expressions. However, property LINK_OPTIONS (and INTERFACE counterpart) support generator expressions. These properties are new for version 3.13 which will be available soon (probably next month). Le mer. 26 sept. 2018 à 05:21, Hendrik Greving < hendrik.greving@gmail.com> a écrit : > Hello, > > our cmake setup is using LOCATION property for two targets to compute a > relative path from these two, and adds this to LINK_FLAGS (for rpath, but > irrelevant in this context). In order to update our cmake w.r.t. CMP0026, I > don't know how to get LINK_FLAGS consume a generator expression. In other > cases file(GENERATE.. writing a set(var TARGET_FILE..) into a file, and > reading the file to obtain 'var' worked. Thanks in advance! > -- > > Powered by www.kitware.com > > Please keep messages on-topic and check the CMake FAQ at: > http://www.cmake.org/Wiki/CMake_FAQ > > Kitware offers various services to support the CMake community. For more > information on each offering, please visit: > > CMake Support: http://cmake.org/cmake/help/support.html > CMake Consulting: http://cmake.org/cmake/help/consulting.html > CMake Training Courses: http://cmake.org/cmake/help/training.html > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Follow this link to subscribe/unsubscribe: > https://cmake.org/mailman/listinfo/cmake > -- Powered by www.kitware.com Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Kitware offers various services to support the CMake community. For more information on each offering, please visit: CMake Support: http://cmake.org/cmake/help/support.html CMake Consulting: http://cmake.org/cmake/help/consulting.html CMake Training Courses: http://cmake.org/cmake/help/training.html Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Follow this link to subscribe/unsubscribe: https://cmake.org/mailman/listinfo/cmake
[CMake] LOCATION target property, generator expressions
Hello, our cmake setup is using LOCATION property for two targets to compute a relative path from these two, and adds this to LINK_FLAGS (for rpath, but irrelevant in this context). In order to update our cmake w.r.t. CMP0026, I don't know how to get LINK_FLAGS consume a generator expression. In other cases file(GENERATE.. writing a set(var TARGET_FILE..) into a file, and reading the file to obtain 'var' worked. Thanks in advance! -- Powered by www.kitware.com Please keep messages on-topic and check the CMake FAQ at: http://www.cmake.org/Wiki/CMake_FAQ Kitware offers various services to support the CMake community. For more information on each offering, please visit: CMake Support: http://cmake.org/cmake/help/support.html CMake Consulting: http://cmake.org/cmake/help/consulting.html CMake Training Courses: http://cmake.org/cmake/help/training.html Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Follow this link to subscribe/unsubscribe: https://cmake.org/mailman/listinfo/cmake