Re: Stus-List C 40 Peregrine Sold

[Andrew Burton via CnC-List]

I've always thought teak looks best when it's scrubbed white--across the grain 
of course. Chemical cleaners take years off the life of a teak deck. Oil also 
takes away from the wonderful non skid properties of a teak deck. 
Andy

Andrew Burton
61 West Narragansett Ave
Newport, RI 
USA 02840

+401 965 5260


> On Dec 23, 2017, at 19:33, coltrek via CnC-List  wrote:
> 
> Isn't it great when everything comes together? :-)
> 
> Congrats,  looks like a great boat.  There is a fellow here who had a Baltic 
> 42, now a 52, he uses some type of oil on the deck and the teak looks as good 
> when he sells them a when he buys them. 
> .
> 
> Bill Coleman
> C 39
> 
> 
>  Original message 
> From: Andrew Burton via CnC-List  
> Date: 12/23/17 15:26 (GMT-05:00) 
> To: cnc-list@cnc-list.com 
> Cc: Andrew Burton  
> Subject: Stus-List C 40 Peregrine Sold 
> 
> Just wanted to let everyone know that we are going to survey next week and 
> all going according to plan, Peregrine is going to a lucky new owner. 
> The first of no doubt many tears have been shed, but the excitement of having 
> the new boat is helping ease the pain. 
> The new boat is a Baltic 47 built in 1995.
> 
> Cheers
> Andy
> 
> 
> Andrew Burton
> 61 W Narragansett
> Newport, RI 
> USA02840
> 
> http://sites.google.com/site/andrewburtonyachtservices/
> +401 965-5260
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List AIS improvement + general rewiring

[Joel Aronson via CnC-List]

Joe
What app do you use on your phone to display the targets?

Joel

On Sat, Dec 23, 2017 at 8:59 PM Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:

> Next snag - Turns out Navionics on Ipads does not support AIS.
> I got the wifi link going, but I could not see any targets. Looked it up
> when I got home and now I know why. iNavX will work, so I guess I'll be
> grabbing that.
>
> OTOH the phone had no issue connecting to the $30 Yakker wifi access
> point. More to follow once I go down there tomorrow, but if this works it
> is a very good buy!
>
> I also need to consider how much belt and suspenders wiring to do. The VHF
> could possibly run off the CP180 GPS instead of the AIS GPS. The AIS GPS
> signal can feed the plotter if the GPS for that dies. I could probably
> think of a few other things to cross connect too and end up with a mile of
> wire.
>
>
>
> Joe Della Barba
>
> j...@dellabarba.com
>
> Coquina
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Joel
> Aronson via CnC-List
> *Sent:* Saturday, December 23, 2017 3:10 PM
>
>
> *To:* cnc-list@cnc-list.com
> *Cc:* Joel Aronson 
> *Subject:* Re: Stus-List AIS improvement + general rewiring
>
>
>
> I was able to connect my cheap Daisy2 AIS receiver to my onboard PC via
> USB. And my plotter via 183.
>
>
>
> Lots of targets around Annapolis!
>
>
>
> Joel
>
>
>
> On Tue, Dec 19, 2017 at 1:13 PM Frederick G Street via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> I don’t know of any gear that even supports AIS over 4800; everything
> requires 38400 baud.
>
>
>
>
> Fred Street -- Minneapolis
> S/V *Oceanis* (1979 C Landfall 38) -- on the hard in Bayfield, WI   :^(
>
>
>
> On Dec 19, 2017, at 12:04 PM, Della Barba, Joe via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>
>
> Yes it does. If you have a lot of AIS targets they will totally overload a
> 4800 baud channel.
>
> The plotter goes off to SH tomorrow. $35 to upgrade the firmware and $15
> more to wipe the MMSI from one of my old VHFs. I have to say Standard
> Horizon is doing well by me today J
>
> Also props to MilltechMarine. I had one of their AIS receivers for years
> and it has migrated to another C lately.
>
>
>
> Joe
>
> Coquina
>
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
>
> Joel
> 301 541 8551
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List C 40 Peregrine Sold

[coltrek via CnC-List]

Isn't it great when everything comes together? :-)
Congrats,  looks like a great boat.  There is a fellow here who had a Baltic 
42, now a 52, he uses some type of oil on the deck and the teak looks as good 
when he sells them a when he buys them. .
Bill ColemanC 39

 Original message 
From: Andrew Burton via CnC-List  
Date: 12/23/17  15:26  (GMT-05:00) 
To: cnc-list@cnc-list.com 
Cc: Andrew Burton  
Subject: Stus-List C 40 Peregrine Sold 

Just wanted to let everyone know that we are going to survey next week and all 
going according to plan, Peregrine is going to a lucky new owner. 
The first of no doubt many tears have been shed, but the excitement of having 
the new boat is helping ease the pain. 
The new boat is a Baltic 47 built in 1995.

Cheers
Andy


Andrew Burton
61 W Narragansett
Newport, RI 
USA    02840

http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List AIS improvement + general rewiring

[Joe Della Barba via CnC-List]

Next snag - Turns out Navionics on Ipads does not support AIS.
I got the wifi link going, but I could not see any targets. Looked it up when I 
got home and now I know why. iNavX will work, so I guess I'll be grabbing that.

OTOH the phone had no issue connecting to the $30 Yakker wifi access point. 
More to follow once I go down there tomorrow, but if this works it is a very 
good buy!

I also need to consider how much belt and suspenders wiring to do. The VHF 
could possibly run off the CP180 GPS instead of the AIS GPS. The AIS GPS signal 
can feed the plotter if the GPS for that dies. I could probably think of a few 
other things to cross connect too and end up with a mile of wire.

 

Joe Della Barba

j...@dellabarba.com  

Coquina

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson 
via CnC-List
Sent: Saturday, December 23, 2017 3:10 PM
To: cnc-list@cnc-list.com
Cc: Joel Aronson 
Subject: Re: Stus-List AIS improvement + general rewiring

 

I was able to connect my cheap Daisy2 AIS receiver to my onboard PC via USB. 
And my plotter via 183. 

 

Lots of targets around Annapolis!

 

Joel

 

On Tue, Dec 19, 2017 at 1:13 PM Frederick G Street via CnC-List 
 > wrote:

I don’t know of any gear that even supports AIS over 4800; everything requires 
38400 baud.

 


Fred Street -- Minneapolis
S/V Oceanis (1979 C Landfall 38) -- on the hard in Bayfield, WI   :^(





On Dec 19, 2017, at 12:04 PM, Della Barba, Joe via CnC-List 
 > wrote:

 

Yes it does. If you have a lot of AIS targets they will totally overload a 4800 
baud channel.

The plotter goes off to SH tomorrow. $35 to upgrade the firmware and $15 more 
to wipe the MMSI from one of my old VHFs. I have to say Standard Horizon is 
doing well by me today :)

Also props to MilltechMarine. I had one of their AIS receivers for years and it 
has migrated to another C lately.

 

Joe

Coquina

 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

-- 

Joel 
301 541 8551

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List C 40 Peregrine Sold

[Danny Haughey via CnC-List]

Wow!  Congratulations Andy!  Obviously the price and condition were the right 
combination fur a quick sale! 
Danny


Sent from my T-Mobile 4G LTE Device
 Original message From: Andrew Burton via CnC-List 
 Date: 12/23/17  3:26 PM  (GMT-05:00) To: 
cnc-list@cnc-list.com Cc: Andrew Burton  Subject: 
Stus-List C 40 Peregrine Sold 
Just wanted to let everyone know that we are going to survey next week and all 
going according to plan, Peregrine is going to a lucky new owner. 
The first of no doubt many tears have been shed, but the excitement of having 
the new boat is helping ease the pain. 
The new boat is a Baltic 47 built in 1995.

Cheers
Andy


Andrew Burton
61 W Narragansett
Newport, RI 
USA    02840

http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Holiday wishes

[Edd Schillay via CnC-List]

Whether you’re in America, Canada, or anywhere else in the Alpha Quadrant, my 
best wishes to all Listers for a joyous holiday along with a happy and healthy 
(and breezy) new year. 

All the best, 

Edd

---
Edd M. Schillay
Captain of the Starship Enterprise 
C 37+ | Sail No: NCC-1701-B
City Island, New York
www.StarshipSailing.com
---
914.774.9767   | Mobile
---
Sent via iPhone 7
iPhone. iTypos. iApologize


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List C 40 Peregrine Sold

[Andrew Burton via CnC-List]

Just wanted to let everyone know that we are going to survey next week and all 
going according to plan, Peregrine is going to a lucky new owner. 
The first of no doubt many tears have been shed, but the excitement of having 
the new boat is helping ease the pain. 
The new boat is a Baltic 47 built in 1995.

Cheers
Andy


Andrew Burton
61 W Narragansett
Newport, RI 
USA02840

http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List AIS improvement + general rewiring

[Joel Aronson via CnC-List]

I was able to connect my cheap Daisy2 AIS receiver to my onboard PC via
USB. And my plotter via 183.

Lots of targets around Annapolis!

Joel

On Tue, Dec 19, 2017 at 1:13 PM Frederick G Street via CnC-List <
cnc-list@cnc-list.com> wrote:

> I don’t know of any gear that even supports AIS over 4800; everything
> requires 38400 baud.
>
>
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C Landfall 38) -- on the hard in Bayfield, WI   :^(
>
> On Dec 19, 2017, at 12:04 PM, Della Barba, Joe via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Yes it does. If you have a lot of AIS targets they will totally overload a
> 4800 baud channel.
> The plotter goes off to SH tomorrow. $35 to upgrade the firmware and $15
> more to wipe the MMSI from one of my old VHFs. I have to say Standard
> Horizon is doing well by me today J
> Also props to MilltechMarine. I had one of their AIS receivers for years
> and it has migrated to another C lately.
>
> Joe
> Coquina
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Holiday wishes

[Tom Buscaglia via CnC-List]

Our best wishes to all of our fellow sailors for a festive holiday season.  
Have a great Christmas or other appropriate winter solstice holiday of your 
choosing.

Tom Buscaglia
S/V Alera 
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
 ___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray