Re: Stus-List Raw Water Blocked

2020-01-06 Thread Russ & Melody via CnC-List 


A friend borrowed my  Fender Jazz Bass in 1986, 
travelled to Alberta and 'lost" it in Edmonton.


If anyone finds one in their raw water strainer 
may I check it for identification? I miss that bass sometimes.


Cheers, Russ
ex Sweet 35 mk-1
B.C. South Coast, Vancouver Island, east side

At 06:32 PM 1/5/2020, you wrote:

Much better than a large smallmouth bass. Or a Fender Jazz Bass.

Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC


On Sun, 5 Jan 2020 at 10:53, Bill Coleman via 
CnC-List <cnc-list@cnc-list.com> wrote:


This fall when winterizing, I found a small, Â 
largemouth bass halfway into my strainer!


Â

Â

Bill Coleman

Erie, PA

Â

Â

Â

From: CnC-List 
[mailto:cnc-list-boun...@cnc-list.com] On Behalf 
Of Jack Fitzgerald via CnC-List

Sent: Sunday, December 29, 2019 4:31 PM
To: C
Cc: Jack Fitzgerald
Subject: Re: Stus-List Raw Water Blocked

Â

Tom

Â

You said:Â Alera has a blockage somewhere in the 
raw water system.  I checked the intake and 
the pump.  Both seem fine But, there seems to be no flow at the strainer.


Â

You likely have sucked up some trash or 
possibly a small fish and this blocking the raw 
water intake line between the intake & the 
strainer. Just my 2 cents worth having been 
there and done that a few times on the 43 years that we have owned Honey


Â

Â

Best regards,
Jack FitzgeraldÂ
S/V HONEY - US12788

C 39 TM (1974)
Savannah, GA 31410 USA

This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged.  If you are not the intended recipient, you are hereby notified
that any retention, dissemination, distribution or copying of this
communication is strictly prohibited.  Please reply to the sender that you
have received this message in error, then delete it.  Thank you

Â

Â

Â

On Sun, Dec 29, 2019 at 2:34 PM Stephen Thorne 
via CnC-List <cnc-list@cnc-list.com> wrote:


It’s also possible the exhaust elbow has 
become corroded.  I had to replace one because of same issue.


Â

Steve Thorne

Deja Vu

Â

On Sun, Dec 29, 2019 at 1:05 PM John and Maryann 
Read via CnC-List <cnc-list@cnc-list.com> wrote:


Tom

What engine do you have?  Fresh or raw water 
cooled?   Common issue for Yanmar is exhaust 
riser getting plugged by carbon etc where water 
enters.  Will also impact engine 
performance.  Disconnect hose where enters 
exhaust riser.  If water streams, then you have 
your answer.  Also check the fitting where hose 
attaches to riser – is clear??  If not, best 
place is check if any blockage at intake or 
strainer – maybe ssomething got into and plugged 
the hose??  A friend’s hose inlet has less 
than ideal configuration and frequently sucks up 
eel grass and such and plugs the inlet 
hose.  Another culprit might be the pump 
impeller lost a vane and is stuck in the system before the strainer.


Â

Just some thoughts and good luck

Â

Â

John and Maryann

Legacy III

1982 C 34

Noank, CT

Â

Â

Â

Â

Â

From: CnC-List 
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tom Buscaglia via CnC-List

Sent: Sunday, December 29, 2019 12:15 PM
To: cnc-list@cnc-list.com
Cc: Tom Buscaglia
Subject: Stus-List Raw Water Blocked

Â

Alera has a blockage somewhere in the raw water 
system.  Nothing out the exhaust.Â


Â

 I checked the intake and the pump.  Both seem 
fine.  But, there seems to be no flow at the strainer.


Â

I am wondering if there is some maintenance 
needed for the vented loop?  It is the next 
link in the chain and I’m running out of links.


Tom Buscaglia

S/V AleraÂ

1990 C 37+/40

Vashon WA

P 206.463.9200

C 305.409.3660

___

Thanks everyone for supporting this list with 
your contributions.  Each and every one is 
greatly appreciated.  If you want to support 
the list - use PayPal to send contribution 
--Â  Â https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with 
your contributions.  Each and every one is 
greatly appreciated.  If you want to support 
the list - use PayPal to send contribution 
--Â  Â https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with 
your contributions.  Each and every one is 
greatly appreciated.  If you want to support 
the list - use PayPal to send contribution 
--Â  Â https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with 
your contributions.  Each and every one is 
greatly appreciated.  If you want to support the 
list - use PayPal to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List cleaning the bilge

2020-01-06 Thread Neil Andersen via CnC-List 


Neil Andersen
20691 Jamieson Rd
Rock Hall, MD 21661

From: CnC-List  on behalf of Della Barba, Joe 
via CnC-List 
Sent: Monday, January 6, 2020 9:14:09 AM
To: cnc-list@cnc-list.com 
Cc: Della Barba, Joe 
Subject: Re: Stus-List cleaning the bilge

Except with one click it arrives tomorrow. Damn you Amazon, I can’t resist next 
day even though the delivery driver slave labor will probably die on my 
doorstep with the cleaner in hand!
Joe
Coquina

From: CnC-List  On Behalf Of Bill Coleman via 
CnC-List
Sent: Sunday, January 5, 2020 3:17 PM
To: 'Joel Aronson' ; cnc-list@cnc-list.com
Cc: Bill Coleman 
Subject: [EXTERNAL] Re: Stus-List cleaning the bilge

Mmm - -Same price as Costco!

From: Joel Aronson [mailto:joel.aron...@gmail.com]
Sent: Sunday, January 05, 2020 2:03 PM
To: cnc-list@cnc-list.com
Cc: Bill Coleman
Subject: Re: Stus-List cleaning the bilge

It is $10 a gallon on Amazon!

On Sun, Jan 5, 2020 at 1:48 PM Bill Coleman via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
Oil Eater, hands down.
https://www.costco.com/oil-eater-cleaner%2c-1-gallon%2c-4-pack-case.product.100278867.html

I have used everything, and this is the best I have encountered.

Bill Coleman
Erie PA

From: CnC-List 
[mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of Bev Parslow via CnC-List
Sent: Thursday, January 02, 2020 10:54 AM
To: cnc-list@cnc-list.com
Cc: Bev Parslow
Subject: Stus-List cleaning the bilge

Need to clean out an oily bilge. Can I use a normal degreaser, or will that 
mess up the bilge pump? Any thoughts?
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray
--
Joel
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List cleaning the bilge

2020-01-06 Thread Della Barba, Joe via CnC-List 
Except with one click it arrives tomorrow. Damn you Amazon, I can’t resist next 
day even though the delivery driver slave labor will probably die on my 
doorstep with the cleaner in hand!
Joe
Coquina

From: CnC-List  On Behalf Of Bill Coleman via 
CnC-List
Sent: Sunday, January 5, 2020 3:17 PM
To: 'Joel Aronson' ; cnc-list@cnc-list.com
Cc: Bill Coleman 
Subject: [EXTERNAL] Re: Stus-List cleaning the bilge

Mmm - -Same price as Costco!

From: Joel Aronson [mailto:joel.aron...@gmail.com]
Sent: Sunday, January 05, 2020 2:03 PM
To: cnc-list@cnc-list.com
Cc: Bill Coleman
Subject: Re: Stus-List cleaning the bilge

It is $10 a gallon on Amazon!

On Sun, Jan 5, 2020 at 1:48 PM Bill Coleman via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
Oil Eater, hands down.
https://www.costco.com/oil-eater-cleaner%2c-1-gallon%2c-4-pack-case.product.100278867.html

I have used everything, and this is the best I have encountered.

Bill Coleman
Erie PA

From: CnC-List 
[mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of Bev Parslow via CnC-List
Sent: Thursday, January 02, 2020 10:54 AM
To: cnc-list@cnc-list.com
Cc: Bev Parslow
Subject: Stus-List cleaning the bilge

Need to clean out an oily bilge. Can I use a normal degreaser, or will that 
mess up the bilge pump? Any thoughts?
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray
--
Joel
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray