Stus-List Re: Perry on Ball

[ALAN BERGEN via CnC-List]

It's available on YouTube.

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR



On Tue, Nov 2, 2021 at 3:50 PM Joel Delamirande via CnC-List <
cnc-list@cnc-list.com> wrote:

> Does anyone have the link
>
> On Tue, Nov 2, 2021 at 6:37 PM Bill Coleman via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Not sure who all was present or have watched replays of the 2 hr Zoom
>> Interview Bob Perry did with Rob Ball , but it was worth the time. Kind of
>> reminded me of the David Rubenstein Peer to Peer interviews.
>>
>>
>>
>> I was great to get insight from two of the best boat designers of our
>> generation – and Perry will soon be doing some other designers.
>>
>>
>>
>> Bill Coleman
>>
>> Entrada, Erie, PA
>>
>>
>>
>>
>> Thanks to all of the subscribers that contributed to the list to help
>> with the costs involved.  If you want to show your support to the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>> 
>> Thanks - Stu
>
> --
> Joel Delamirande
> *www.jdroofing.ca
> *
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --
> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!5HuCm6p1BhlMPQmZqOMb_HJYeH_62UmmUcEnqjSgWrkMXDyqHO00MvNUCTVSj-s7y9M$
>  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Perry on Ball

[tom sutton via CnC-List]

Is this what you are looking for?

https://www.youtube.com/watch?v=F5EUNYc_xiw

Cheers,

Tom S

Sent from Mail for Windows

From: Joel Delamirande via CnC-List
Sent: November 2, 2021 6:50 PM
To: Stus-List
Cc: Joel Delamirande
Subject: Stus-List Re: Perry on Ball

Does anyone have the link 

On Tue, Nov 2, 2021 at 6:37 PM Bill Coleman via CnC-List 
 wrote:
Not sure who all was present or have watched replays of the 2 hr Zoom Interview 
Bob Perry did with Rob Ball , but it was worth the time. Kind of reminded me of 
the David Rubenstein Peer to Peer interviews.
 
I was great to get insight from two of the best boat designers of our 
generation – and Perry will soon be doing some other designers.
 
Bill Coleman
Entrada, Erie, PA
 
 
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
-- 
Joel Delamirande

www.jdroofing.ca


Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Perry on Ball

[Joel Delamirande via CnC-List]

Does anyone have the link

On Tue, Nov 2, 2021 at 6:37 PM Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:

> Not sure who all was present or have watched replays of the 2 hr Zoom
> Interview Bob Perry did with Rob Ball , but it was worth the time. Kind of
> reminded me of the David Rubenstein Peer to Peer interviews.
>
>
>
> I was great to get insight from two of the best boat designers of our
> generation – and Perry will soon be doing some other designers.
>
>
>
> Bill Coleman
>
> Entrada, Erie, PA
>
>
>
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu

-- 
Joel Delamirande
*www.jdroofing.ca *
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Perry on Ball

[Bill Coleman via CnC-List]

Not sure who all was present or have watched replays of the 2 hr Zoom Interview 
Bob Perry did with Rob Ball , but it was worth the time. Kind of reminded me of 
the David Rubenstein Peer to Peer interviews.

 

I was great to get insight from two of the best boat designers of our 
generation – and Perry will soon be doing some other designers.

 

Bill Coleman

Entrada, Erie, PA

 

 

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: engine oil amount

[ALAN BERGEN via CnC-List]

One way to keep the extraction hose straight is to insert a wire coat
hanger in it. Make it long enough so that if it slips out of the hose, you
will be able to retrieve it.

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR



On Tue, Nov 2, 2021 at 10:17 AM Jim Watts via CnC-List <
cnc-list@cnc-list.com> wrote:

> I also wrapped a piece of tape around the hose, unfortunately it came off
> and slid down the dipstick tube. I had to remove the oil pan to retrieve
> it. Some sort of marker might be safer.
>
> Jim Watts
> Paradigm Shift
> C&C 35 Mk III
> Victoria, BC
>
>
> On Sun, 31 Oct 2021 at 14:44, John Christopher via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> I had the same issue and surprise. In my case I was pushing too much of
>> the extract hose down the dipstick opening and it would coil up in the pan
>> where the opening of the hose was not facing / touching the bottom of the
>> pan. It could have also run up the side of the pan internally (too small to
>> see :))
>>
>> I straightened my extract hose and pushed it down and got all of the oil
>> out (4.5 liters).
>>
>> My extract hose is a little stiff so all I did was tape a s screw driver
>> on the end for weight, held it up and used my heat gun. I cooled it off
>> with a wet rag.
>>
>> I also wrapped a piece of tape around the extract hose so next time I
>> know :).
>>
>>
>> /John
>> LF 38, #155, Ontario
>>
>> On Oct 31, 2021, at 5:31 PM, G Gao via CnC-List 
>> wrote:
>>
>> 
>> Universal Diesel 5424 here. According to the manual, this engine has
>> 5.6QT of engine oil. Last season and today, both times I use oil extractor
>> through the dipstick hole, could only get a little over 3 quarters out.
>>
>> Is this normal, or am I not doing it right?
>>
>> thx in advance.
>>
>> Bo
>>
>>
>> --
>> 1974 C&C 35 MK2
>> Thanks to all of the subscribers that contributed to the list to help
>> with the costs involved.  If you want to show your support to the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>> 
>>  Thanks - Stu
>>
>> Thanks to all of the subscribers that contributed to the list to help
>> with the costs involved.  If you want to show your support to the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>> 
>> Thanks - Stu
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --
> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!8vy5FBljsvmyydpR7VJ-efDT-HyvUwKP-d07JTs4OY3D2OHhT6ZXl7R1bJv-37aE2PA$
>  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: engine oil amount

[Jim Watts via CnC-List]

I also wrapped a piece of tape around the hose, unfortunately it came off
and slid down the dipstick tube. I had to remove the oil pan to retrieve
it. Some sort of marker might be safer.

Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC


On Sun, 31 Oct 2021 at 14:44, John Christopher via CnC-List <
cnc-list@cnc-list.com> wrote:

> I had the same issue and surprise. In my case I was pushing too much of
> the extract hose down the dipstick opening and it would coil up in the pan
> where the opening of the hose was not facing / touching the bottom of the
> pan. It could have also run up the side of the pan internally (too small to
> see :))
>
> I straightened my extract hose and pushed it down and got all of the oil
> out (4.5 liters).
>
> My extract hose is a little stiff so all I did was tape a s screw driver
> on the end for weight, held it up and used my heat gun. I cooled it off
> with a wet rag.
>
> I also wrapped a piece of tape around the extract hose so next time I know
> :).
>
>
> /John
> LF 38, #155, Ontario
>
> On Oct 31, 2021, at 5:31 PM, G Gao via CnC-List 
> wrote:
>
> 
> Universal Diesel 5424 here. According to the manual, this engine has 5.6QT
> of engine oil. Last season and today, both times I use oil extractor
> through the dipstick hole, could only get a little over 3 quarters out.
>
> Is this normal, or am I not doing it right?
>
> thx in advance.
>
> Bo
>
>
> --
> 1974 C&C 35 MK2
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Poli-Glow question

[Jim Watts via CnC-List]

We have stripped back to gelcoat a couple of times. Human-comfortable
temperatures work best, not in direct sunlight because then the stripper
evaporates too quickly.
We also use a commercial acrylic floor stripper, it works as well or better
than Poli Strip and is a lot cheaper.
https://www.homedepot.ca/product/zep-commercial-3-78-l-heavy-duty-floor-stripper/1000115778

Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC


On Sun, 31 Oct 2021 at 19:21, Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:

> I think you're right to go back to the gelcoat, but as far as temperature,
> if the what you're inquiring about, I would call the manufacturer, the're
> pretty friendly that way
>
> Bill Coleman
>
> On Sun, Oct 31, 2021, 8:27 PM CHARLES SCHEAFFER via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Got a Poli-Glow question.
>> I didn't apply Poli-Glow on the hull for two years and recently noticed
>> some peeling.  I hope to try using Poli-Strip but thought I'd ask the group
>> for tips.   Is there any temperature minimum?
>>
>> Chuck Scheaffer, Resolute 1989 C&C 34R, Annapolis
>> Thanks to all of the subscribers that contributed to the list to help
>> with the costs involved.  If you want to show your support to the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>> Thanks - Stu
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu