Re: Stus-List CBC 26 rudder post
Thank you Rick. Got them. Mine is missing the cover, otherwise is the post and attachment configuration is the same. The problem is that over the years the bolt holes on the shaft have elongated slightly so now there is play in the tiller, significantly affecting the performance. I have a fix in mind but wanted to be sure there wasn’t a missing fitting before starting the repair/rebuild. Tony Coppola On Sun, Jul 14, 2019 at 5:37 PM Rick Taillieu via CnC-List < cnc-list@cnc-list.com> wrote: > Anthony, > > I've sent some C 26 tiller to ruder stock pictures directly to you. > > Rick Taillieu > Boatless > Leamington, Ontario > > > > -Original Message- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of > Anthony Coppola via CnC-List > Sent: July-13-19 23:58 > To: cnc-list@cnc-list.com > Cc: Anthony Coppola > Subject: Stus-List CBC 26 rudder post > > Can someone with a cnc 26 (1978) send me a picture of the rudder post/ > tiller attachment. I recently purchased a 26 and the post is just a tube > with a hole drilled in it for the screw that holds the tiller handle. It > doesn’t look right. Shouldn’t it have some kind of fitting on top of the > post for the handle to attach to, also cover the top of the post? > > Sent from my iPad > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > > > --- > This email has been checked for viruses by AVG. > https://www.avg.com > > > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List CBC 26 rudder post
Anthony, I've sent some C 26 tiller to ruder stock pictures directly to you. Rick Taillieu Boatless Leamington, Ontario -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Anthony Coppola via CnC-List Sent: July-13-19 23:58 To: cnc-list@cnc-list.com Cc: Anthony Coppola Subject: Stus-List CBC 26 rudder post Can someone with a cnc 26 (1978) send me a picture of the rudder post/ tiller attachment. I recently purchased a 26 and the post is just a tube with a hole drilled in it for the screw that holds the tiller handle. It doesn’t look right. Shouldn’t it have some kind of fitting on top of the post for the handle to attach to, also cover the top of the post? Sent from my iPad ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray --- This email has been checked for viruses by AVG. https://www.avg.com ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List CBC 26 rudder post
Wish I'd seen this earlier, just got home from working on my '78 26. Mine does have a fitting and cover. I'll make sure to go by tomorrow and take a few pics. I've been doing a lot of "40-year maintenance" this past year and if you have any questions feel free to contact me. 305-761-8098 Jim Hesketh 1978 C 26 Whisper Miami, FL Can someone with a cnc 26 (1978) send me a picture of the rudder post/ >>> tiller attachment. I recently purchased a 26 and the post is just a tube >>> with a hole drilled in it for the screw that holds the tiller handle. It >>> doesn’t look right. Shouldn’t it have some kind of fitting on top of the >>> post for the handle to attach to, also cover the top of the post? >>> >> ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List CBC 26 rudder post
Thanks Josh. Could be the same “cheap” set up. Tony Coppola On Sun, Jul 14, 2019 at 6:07 AM Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > Not a C but my MacGregor 26 had a stainless steel tube with a hole > drilled through for the tiller handle. Cheap... But it worked. > > Josh Muckley > S/V Sea Hawk > 1989 C 37+ > Solomons, MD > > > > On Sat, Jul 13, 2019, 11:58 PM Anthony Coppola via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Can someone with a cnc 26 (1978) send me a picture of the rudder post/ >> tiller attachment. I recently purchased a 26 and the post is just a tube >> with a hole drilled in it for the screw that holds the tiller handle. It >> doesn’t look right. Shouldn’t it have some kind of fitting on top of the >> post for the handle to attach to, also cover the top of the post? >> >> Sent from my iPad >> ___ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List CBC 26 rudder post
Not a C but my MacGregor 26 had a stainless steel tube with a hole drilled through for the tiller handle. Cheap... But it worked. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Sat, Jul 13, 2019, 11:58 PM Anthony Coppola via CnC-List < cnc-list@cnc-list.com> wrote: > Can someone with a cnc 26 (1978) send me a picture of the rudder post/ > tiller attachment. I recently purchased a 26 and the post is just a tube > with a hole drilled in it for the screw that holds the tiller handle. It > doesn’t look right. Shouldn’t it have some kind of fitting on top of the > post for the handle to attach to, also cover the top of the post? > > Sent from my iPad > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Stus-List CBC 26 rudder post
Can someone with a cnc 26 (1978) send me a picture of the rudder post/ tiller attachment. I recently purchased a 26 and the post is just a tube with a hole drilled in it for the screw that holds the tiller handle. It doesn’t look right. Shouldn’t it have some kind of fitting on top of the post for the handle to attach to, also cover the top of the post? Sent from my iPad ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
