Stus-List Re: [EXTERNAL] mounting chart plotter at helm
Thanks all for the input. I should have added that I will be using the chartplotter for racing, and more for B&G's sail-steer information ( TWS, TWA, AWS, AWS, TWD, laylines, wind shift patterns, routing) than for the plotter aspect. > On 12/03/2021 1:03 PM Dave S via CnC-List wrote: > > > I have a fixed plotter at the nav table, I leave that running > (openplotter on a raspberry Pi) and when I need a chart at the helm while > steering, I use an iPad in a waterproof case, on a detachable ram mount. The > iPad is really only used in tight quarters while steering so - like Joel- I > only view from the wheel. > The iPad stays below, charging, on another ram ball when not in use. > Prior to getting the Pi, the iPad was left running below but was moved to the > helm when needed. > The iPad connects the the network via wifi, the Pi via a USB gateway. > The iPad can be viewed from any angle when at the helm. I imagined this > was good and useful at first but in reality i’ve never found the need. > Dave > Sent from my iPhone > > > > > On Dec 3, 2021, at 12:43 PM, Joel Aronson via CnC-List > wrote: > > > > > > > > > > I have a RAM mount on the pedestal guard, but rarely > rotate the plotter. > > > > Joel > > > > On Fri, Dec 3, 2021 at 8:33 AM Della Barba, Joe via CnC-List > > mailto:cnc-list@cnc-list.com > wrote: > > > > > > > I have a plotter at the helm of my 35 MK I. It faces aft, > > if I want to navigate from forward, like I do about 90% of the time, I look > > at the computer on the chart table or SeaIQ/Navionics on my iPad. > > > If I rotated the helm plotter sideways I think the mainsheet > > > would get it. > > > > > > Joe Della Barba > > > Coquina > > > 73 C&C 35 MK I > > > > > > > > > -Original Message- > > > From: Bob Mann via CnC-List > > mailto:cnc-list@cnc-list.com > > > > Sent: Thursday, December 2, 2021 8:21 PM > > > To: Stus-List > > mailto:cnc-list@cnc-list.com > > > > Cc: Bob Mann > > mailto:sailrm...@comcast.net > > > > Subject: [EXTERNAL] Stus-List mounting chart plotter at helm > > > > > > I was going to put another instrument display at the helm of > > > my 35 mk I, but realized a chartplotter was only a couple hundred more so > > > went that route. > > > > > > Any suggestions on how to mount it to my Edson pedestal so I > > > can rotate it sideways, for easy viewing from the coaming? I rarely steer > > > from behind the wheel so I want to see it from the sides. The pedestal > > > is about the same height as the wheel (not my boat, but similar setup. I > > > don't have the top tray): > > > https://i44.servimg.com/u/f44/17/14/05/22/2012-110.jpg) > > > > > > The chartplotter is the B&G Vulcan 9. > > > > > > regards, > > > Bob Mann > > > Thanks to all of the subscribers that contributed to the list > > > to help with the costs involved. If you want to show your support to the > > > list - use PayPal to send contribution -- > > > https://www.paypal.me/stumurray Thanks - Stu > > > Thanks to all of the subscribers that contributed to the list > > > to help with the costs involved. If you want to show your support to the > > > list - use PayPal to send contribution -- > > > https://www.paypal.me/stumurray Thanks - Stu > > > > > > > > > > > > -- > > Joel > > > > Thanks to all of the subscribers that contributed to the list to > > help with the costs involved. If you want to show your support to the list > > - use PayPal to send contribution -- https://www.paypal.me/stumurray > > Thanks - Stu > > > > > Thanks to all of the subscribers that contributed to the list to > > help with the costs involved. If you want to show your support to the list > > - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > > - Stu > Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Stus-List Re: [EXTERNAL] mounting chart plotter at helm
I have a fixed plotter at the nav table, I leave that running (openplotter on a raspberry Pi) and when I need a chart at the helm while steering, I use an iPad in a waterproof case, on a detachable ram mount. The iPad is really only used in tight quarters while steering so - like Joel- I only view from the wheel. The iPad stays below, charging, on another ram ball when not in use. Prior to getting the Pi, the iPad was left running below but was moved to the helm when needed. The iPad connects the the network via wifi, the Pi via a USB gateway. The iPad can be viewed from any angle when at the helm. I imagined this was good and useful at first but in reality i’ve never found the need. Dave Sent from my iPhone > On Dec 3, 2021, at 12:43 PM, Joel Aronson via CnC-List > wrote: > > > I have a RAM mount on the pedestal guard, but rarely rotate the plotter. > > Joel > >> On Fri, Dec 3, 2021 at 8:33 AM Della Barba, Joe via CnC-List >> wrote: >> I have a plotter at the helm of my 35 MK I. It faces aft, if I want to >> navigate from forward, like I do about 90% of the time, I look at the >> computer on the chart table or SeaIQ/Navionics on my iPad. >> If I rotated the helm plotter sideways I think the mainsheet would get it. >> >> Joe Della Barba >> Coquina >> 73 C&C 35 MK I >> >> >> -Original Message- >> From: Bob Mann via CnC-List >> Sent: Thursday, December 2, 2021 8:21 PM >> To: Stus-List >> Cc: Bob Mann >> Subject: [EXTERNAL] Stus-List mounting chart plotter at helm >> >> I was going to put another instrument display at the helm of my 35 mk I, but >> realized a chartplotter was only a couple hundred more so went that route. >> >> Any suggestions on how to mount it to my Edson pedestal so I can rotate it >> sideways, for easy viewing from the coaming? I rarely steer from behind the >> wheel so I want to see it from the sides. The pedestal is about the same >> height as the wheel (not my boat, but similar setup. I don't have the top >> tray): https://i44.servimg.com/u/f44/17/14/05/22/2012-110.jpg) >> >> The chartplotter is the B&G Vulcan 9. >> >> regards, >> Bob Mann >> Thanks to all of the subscribers that contributed to the list to help with >> the costs involved. If you want to show your support to the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - >> Stu >> Thanks to all of the subscribers that contributed to the list to help with >> the costs involved. If you want to show your support to the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - >> Stu > > > -- > Joel > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Stus-List Re: [EXTERNAL] mounting chart plotter at helm
I have a RAM mount on the pedestal guard, but rarely rotate the plotter. Joel On Fri, Dec 3, 2021 at 8:33 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > I have a plotter at the helm of my 35 MK I. It faces aft, if I want to > navigate from forward, like I do about 90% of the time, I look at the > computer on the chart table or SeaIQ/Navionics on my iPad. > If I rotated the helm plotter sideways I think the mainsheet would get it. > > Joe Della Barba > Coquina > 73 C&C 35 MK I > > > -Original Message- > From: Bob Mann via CnC-List > Sent: Thursday, December 2, 2021 8:21 PM > To: Stus-List > Cc: Bob Mann > Subject: [EXTERNAL] Stus-List mounting chart plotter at helm > > I was going to put another instrument display at the helm of my 35 mk I, > but realized a chartplotter was only a couple hundred more so went that > route. > > Any suggestions on how to mount it to my Edson pedestal so I can rotate it > sideways, for easy viewing from the coaming? I rarely steer from behind the > wheel so I want to see it from the sides. The pedestal is about the same > height as the wheel (not my boat, but similar setup. I don't have the top > tray): https://i44.servimg.com/u/f44/17/14/05/22/2012-110.jpg) > > The chartplotter is the B&G Vulcan 9. > > regards, > Bob Mann > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > -- Joel Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Stus-List Re: [EXTERNAL] mounting chart plotter at helm
I have a plotter at the helm of my 35 MK I. It faces aft, if I want to navigate from forward, like I do about 90% of the time, I look at the computer on the chart table or SeaIQ/Navionics on my iPad. If I rotated the helm plotter sideways I think the mainsheet would get it. Joe Della Barba Coquina 73 C&C 35 MK I -Original Message- From: Bob Mann via CnC-List Sent: Thursday, December 2, 2021 8:21 PM To: Stus-List Cc: Bob Mann Subject: [EXTERNAL] Stus-List mounting chart plotter at helm I was going to put another instrument display at the helm of my 35 mk I, but realized a chartplotter was only a couple hundred more so went that route. Any suggestions on how to mount it to my Edson pedestal so I can rotate it sideways, for easy viewing from the coaming? I rarely steer from behind the wheel so I want to see it from the sides. The pedestal is about the same height as the wheel (not my boat, but similar setup. I don't have the top tray): https://i44.servimg.com/u/f44/17/14/05/22/2012-110.jpg) The chartplotter is the B&G Vulcan 9. regards, Bob Mann Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
