Stus-List Re: halyard/sheet bags

[Randal Stafford via CnC-List]

My genoa halyard occasionally gets fouled on the galley sink foot pump.  And I 
have melted spots into fenders when they fall onto the prop shaft from the 
lazaret.

Cheers,
Randy

> On Aug 16, 2021, at 8:25 PM, Martin DeYoung via CnC-List 
>  wrote:
> 
> Funny story about dropping halyard tails down the companion way hatch:
> We did that on a custom 2 toner back in the early 80’s until a tail got 
> caught in the prop shaft. The 2 toner was stripped out enough down below that 
> there was a small gap behind the engine box.
> 
> After that I always checked before dropping the tails.
> 
> Martin DeYoung
> Calypso 
> 1971 C 43
> Seattle/Port Townsend’s yard 
> 
>> On Aug 16, 2021, at 6:08 AM, Matthew via CnC-List > > wrote:
>> 
>> 
>> Chuck:
>>  
>> My 42 has winches around the mast for halyards.  When in 
>> use, we coil line around the winches.  When not in use, there’s not much to 
>> store.
>>  
>> My main sheet, Cunningham, main outhaul, chute downhaul 
>> (foreguy), and traveler control lines all lead to the front of the cockpit.  
>> Like others, we just let them hang down the companionway when in use.  When 
>> not in use, we coil lines around winches.  An issue someone pointed out to 
>> me is that one of our fire extinguishers is mounted in a location that a 
>> hanging line could grab it.  Haven’t settled on a solution for that yet.
>>  
>> From: CHARLES SCHEAFFER via CnC-List > > 
>> Sent: Saturday, August 14, 2021 5:52 PM
>> To: CNC boat owners, cnc-list > >
>> Cc: CHARLES SCHEAFFER > >
>> Subject: Stus-List halyard/sheet bags
>>  
>> Hey guys,
>>  
>> What is everybody using for halyard bags for the lines next to the 
>> companionway and also sheet bags for the genoa sheets.  Anybody have 
>> suggestions?  Pictures?
>>  
>> Chuck Scheaffer, Resolute 1989 C 34R
>> Thanks to all of the subscribers that contributed to the list to help with 
>> the costs involved.  If you want to show your support to the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray 
>>   Thanks - Stu
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray 
>   Thanks - Stu

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[ALAN BERGEN via CnC-List]

Whenever I have dropped my halyards down the companionway, they always
manage to get caught between the companionway stairs and the quarter berth.

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR



On Mon, Aug 16, 2021 at 7:26 PM Martin DeYoung via CnC-List <
cnc-list@cnc-list.com> wrote:

> Funny story about dropping halyard tails down the companion way hatch:
> We did that on a custom 2 toner back in the early 80’s until a tail got
> caught in the prop shaft. The 2 toner was stripped out enough down below
> that there was a small gap behind the engine box.
>
> After that I always checked before dropping the tails.
>
> Martin DeYoung
> Calypso
> 1971 C 43
> Seattle/Port Townsend’s yard
>
> On Aug 16, 2021, at 6:08 AM, Matthew via CnC-List 
> wrote:
>
> 
>
> Chuck:
>
>
>
> My 42 has winches around the mast for halyards.  When in
> use, we coil line around the winches.  When not in use, there’s not much to
> store.
>
>
>
> My main sheet, Cunningham, main outhaul, chute downhaul
> (foreguy), and traveler control lines all lead to the front of the
> cockpit.  Like others, we just let them hang down the companionway when in
> use.  When not in use, we coil lines around winches.  An issue someone
> pointed out to me is that one of our fire extinguishers is mounted in a
> location that a hanging line could grab it.  Haven’t settled on a solution
> for that yet.
>
>
>
> *From:* CHARLES SCHEAFFER via CnC-List 
> *Sent:* Saturday, August 14, 2021 5:52 PM
> *To:* CNC boat owners, cnc-list 
> *Cc:* CHARLES SCHEAFFER 
> *Subject:* Stus-List halyard/sheet bags
>
>
>
> Hey guys,
>
>
>
> What is everybody using for halyard bags for the lines next to the
> companionway and also sheet bags for the genoa sheets.  Anybody have
> suggestions?  Pictures?
>
>
>
> Chuck Scheaffer, Resolute 1989 C 34R
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
>  Thanks - Stu
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --
> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!4lmvfwfWLNbWKnnp7uD2J2NgjZHlebW06s_a72E4uwcSS36Qs94DDSzMV8emMgZNe_0$
>  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Martin DeYoung via CnC-List]

Funny story about dropping halyard tails down the companion way hatch:
We did that on a custom 2 toner back in the early 80’s until a tail got caught 
in the prop shaft. The 2 toner was stripped out enough down below that there 
was a small gap behind the engine box.

After that I always checked before dropping the tails.

Martin DeYoung
Calypso
1971 C 43
Seattle/Port Townsend’s yard

On Aug 16, 2021, at 6:08 AM, Matthew via CnC-List  wrote:


Chuck:

My 42 has winches around the mast for halyards.  When in use, 
we coil line around the winches.  When not in use, there’s not much to store.

My main sheet, Cunningham, main outhaul, chute downhaul 
(foreguy), and traveler control lines all lead to the front of the cockpit.  
Like others, we just let them hang down the companionway when in use.  When not 
in use, we coil lines around winches.  An issue someone pointed out to me is 
that one of our fire extinguishers is mounted in a location that a hanging line 
could grab it.  Haven’t settled on a solution for that yet.

From: CHARLES SCHEAFFER via CnC-List 
Sent: Saturday, August 14, 2021 5:52 PM
To: CNC boat owners, cnc-list 
Cc: CHARLES SCHEAFFER 
Subject: Stus-List halyard/sheet bags

Hey guys,

What is everybody using for halyard bags for the lines next to the companionway 
and also sheet bags for the genoa sheets.  Anybody have suggestions?  Pictures?

Chuck Scheaffer, Resolute 1989 C 34R
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Matthew via CnC-List]

Chuck:

 

My 42 has winches around the mast for halyards.  When in use, 
we coil line around the winches.  When not in use, there’s not much to store.

 

My main sheet, Cunningham, main outhaul, chute downhaul 
(foreguy), and traveler control lines all lead to the front of the cockpit.  
Like others, we just let them hang down the companionway when in use.  When not 
in use, we coil lines around winches.  An issue someone pointed out to me is 
that one of our fire extinguishers is mounted in a location that a hanging line 
could grab it.  Haven’t settled on a solution for that yet. 

 

From: CHARLES SCHEAFFER via CnC-List  
Sent: Saturday, August 14, 2021 5:52 PM
To: CNC boat owners, cnc-list 
Cc: CHARLES SCHEAFFER 
Subject: Stus-List halyard/sheet bags

 

Hey guys, 

  

What is everybody using for halyard bags for the lines next to the companionway 
and also sheet bags for the genoa sheets.  Anybody have suggestions?  Pictures? 

  

Chuck Scheaffer, Resolute 1989 C 34R 

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Dennis C. via CnC-List]

Like Josh,  once the sails are hoisted, the halyards get fed down the
companionway so they lay on top of themselves so they don't foul when the
sails are dropped.

When the sails are not hoisted, the halyards are simply coiled around the
cabintop winches.

I do have sheet bags for the mainsheet and spin sheets.  They are mesh.
They are similar to this.

https://www.amazon.com/HARKEN-Sheet-Bag-Small-Snaps/dp/B083H3JYY8

All three sheet bags have snaps on the corners so I can remove them.  The
spin sheet bags normally live below.
--
Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Sat, Aug 14, 2021 at 5:34 PM Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:

> All the cabin top lines just get sent down the companionway.  They hang
> straight and stay relatively untangled.  The jib sheets are cut to length
> such that they only have a few feet of tail.  Never really have too much
> problem with just those 2 lines being staged on the cockpit floor or on the
> bench.  Any bag solutions I've ever seen or considered are just more
> trouble to load and unload and untangle.  I alway consider the potential
> need to dump a sail in an emergency.  A bag of spaghetti isn't helpful in
> that situation.  YMMV
>
> Josh Muckley
> S/V Sea Hawk
> 1989 C 37+
> Solomons, MD
>
> On Sat, Aug 14, 2021, 17:52 CHARLES SCHEAFFER via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Hey guys,
>>
>> What is everybody using for halyard bags for the lines next to the
>> companionway and also sheet bags for the genoa sheets.  Anybody have
>> suggestions?  Pictures?
>>
>> Chuck Scheaffer, Resolute 1989 C 34R
>>
>
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Dave S via CnC-List]

Sure - You probably do it all the time - a good example would be a dock line 
where you take a half turn around a cleat to take the load and grab the line 
between the cleat and the boat, and pull at 90deg, then take up the slack with 
the running end.   It’s a simple way to increase mechanical advantage. 

The expression was used on STV pathfinder when I was a teenager.   (Late 70s 
early 80’s) It means rather that pulling directly on a line, you pulllaterally, 
then tailing the slack created.  This was how the yards and halyards would be 
given their final hoist.  There was typically a turning block on deck, and one 
or two crewmembers ‘horsed’ on the line while another tailed with the line 
around a belaying pin on the pinrail.

This may also be known as ‘sweating’ the line up/in.  Not sure about that 
though. 

https://www.canadianyachting.ca/news-and-events/current/4363-the-brigantine-pathfinder-retires

Using this method against the The ratcheting block on the furling line helps me 
get the first few feet of sail furled when the wind is blowing.

Dave 


Sent from my iPhone

> On Aug 15, 2021, at 9:30 AM, Bruce Whitmore via CnC-List 
>  wrote:
> 
> 
> Sorry, I don't know the reference "horse and tail" regarding the furler line, 
> and I couldn't find it using a Google search. 
> 
> Would you explain further please?
> 
> Bruce Whitmore
> 1994 C 37/40+
> "Astralis"
> Madeira Beach, FL
> (847) 404-5092
> 
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Bruce Whitmore via CnC-List]

Sorry, I don't know the reference "horse and tail" regarding the furler
line, and I couldn't find it using a Google search.

Would you explain further please?

Bruce Whitmore
1994 C 37/40+
"Astralis"
Madeira Beach, FL
(847) 404-5092
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[ALAN BERGEN via CnC-List]

I don't coil my halyards when I put them in the bag. I drop them in the
bag, starting with the bitter end. When I drop the sails, the halyards come
out of the bag without any tangles.

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR



On Sat, Aug 14, 2021 at 6:16 PM Dave S via CnC-List 
wrote:

> Same - when sailing (often  singlehanded) my  main halyard is hung over
> its starboard side cabin-top winch in a long, orderly coil.When I need
> it,  I carefully drop that coil into the cabin sole, so that it can run out
> freely, turning around the winch, and through the clutch.
>
> The port-side roller-furled genoa halyard is luggage-tagged around the
> dodger frame to keep it ready but out of the way.  I would re coil it and
> treat it similarly to the main in in the event I had to douse underway.
> Fortunately, since I sorted my furler jams this hasn’t often been necessary.
>
> Agreed with others,I think halyard bags would be a nuisance on this boat.
> Plus, I hang my binoculars where a bag might otherwise hang!
>
> Genoa sheets I coil and hang on their winches, drop on the cockpit sole to
> tack.
>
> Starboard-side Furler line is luggage-tagged on the pushpit, re coiled and
> carefully dropped on the cockpit sole when required. This is cleated on a
> rail-mount cleat on the pushpit located after a ratcheting block by the
> forward pushpit base.  In this way I can either haul on The furler line
> directly or,  if it’s really blowing, horse-and-tail with the ratchet block
> taking the load.   This seems to be necessary more often of late - stronger
> winds or advancing years.
>
> Dave 33-2 windstar.
>
>
>
> Sent from my iPhone
>
> On Aug 14, 2021, at 7:31 PM, Randal Stafford via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Hi Chuck,
>
> I run the tails of my halyards and vang down the companionway, and coil
> each one on the cabin sole in such a way that it can run out freely when
> needed.  The tail of my working genoa sheet is usually coiled on the
> cockpit bench.  The sheet length is such that the lazy sheet only has a
> couple feet of tail, usually wrapped around the winch ready for the next
> tack or gybe.  My mainsheet is coiled on the cockpit sole, and my traveler
> lines are coiled on the bench between the traveler and transom.  My
> spinnaker sheets when not in use are coiled on the side deck between
> cockpit coaming and stern pulpit.
>
> Cheers,
> Randy
>
> On Aug 14, 2021, at 3:51 PM, CHARLES SCHEAFFER via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Hey guys,
>
> What is everybody using for halyard bags for the lines next to the
> companionway and also sheet bags for the genoa sheets.  Anybody have
> suggestions?  Pictures?
>
> Chuck Scheaffer, Resolute 1989 C 34R
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
>  Thanks - Stu
>
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
>  Thanks - Stu
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --
> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!9GkczqzEIuZhUZML4PXtQuBGjtrcN3tdMW3y9Lcj5zuePnKbuUiwcFRrLSbbf1eGYf8$
>  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Marek Dziedzic via CnC-List]

I don’t use bags; instead, I use little hooks with a bungy or cord loop to hang 
the lines. This way they dry out quickly. And there is no issue of the mess in 
the bag (spiders, debris).

Picture here: https://www.dropbox.com/s/lbhrxz6qgpw9s1q/20190618_200045.jpg?dl=0

Marek

1994 C270 ”Legato”
Ottawa, ON



From: CHARLES SCHEAFFER via CnC-List
Sent: Saturday, August 14, 2021 5:52 PM
To: CNC boat owners, cnc-list 
Cc: CHARLES SCHEAFFER 
Subject: Stus-List halyard/sheet bags

Hey guys,

What is everybody using for halyard bags for the lines next to the companionway 
and also sheet bags for the genoa sheets.  Anybody have suggestions?  Pictures?

Chuck Scheaffer, Resolute 1989 C 34R
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Dave S via CnC-List]

Same - when sailing (often  singlehanded) my  main halyard is hung over its 
starboard side cabin-top winch in a long, orderly coil.When I need it,  I 
carefully drop that coil into the cabin sole, so that it can run out freely, 
turning around the winch, and through the clutch.  

The port-side roller-furled genoa halyard is luggage-tagged around the dodger 
frame to keep it ready but out of the way.  I would re coil it and treat it 
similarly to the main in in the event I had to douse underway.  Fortunately, 
since I sorted my furler jams this hasn’t often been necessary.

Agreed with others,I think halyard bags would be a nuisance on this boat.  
Plus, I hang my binoculars where a bag might otherwise hang!

Genoa sheets I coil and hang on their winches, drop on the cockpit sole to 
tack.  

Starboard-side Furler line is luggage-tagged on the pushpit, re coiled and 
carefully dropped on the cockpit sole when required. This is cleated on a 
rail-mount cleat on the pushpit located after a ratcheting block by the forward 
pushpit base.  In this way I can either haul on The furler line directly or,  
if it’s really blowing, horse-and-tail with the ratchet block taking the load.  
 This seems to be necessary more often of late - stronger winds or advancing 
years.

Dave 33-2 windstar.



Sent from my iPhone

> On Aug 14, 2021, at 7:31 PM, Randal Stafford via CnC-List 
>  wrote:
> 
> Hi Chuck,
> 
> I run the tails of my halyards and vang down the companionway, and coil each 
> one on the cabin sole in such a way that it can run out freely when needed.  
> The tail of my working genoa sheet is usually coiled on the cockpit bench.  
> The sheet length is such that the lazy sheet only has a couple feet of tail, 
> usually wrapped around the winch ready for the next tack or gybe.  My 
> mainsheet is coiled on the cockpit sole, and my traveler lines are coiled on 
> the bench between the traveler and transom.  My spinnaker sheets when not in 
> use are coiled on the side deck between cockpit coaming and stern pulpit.
> 
> Cheers,
> Randy
> 
>> On Aug 14, 2021, at 3:51 PM, CHARLES SCHEAFFER via CnC-List 
>>  wrote:
>> 
>> Hey guys,
>>  
>> What is everybody using for halyard bags for the lines next to the 
>> companionway and also sheet bags for the genoa sheets.  Anybody have 
>> suggestions?  Pictures?
>>  
>> Chuck Scheaffer, Resolute 1989 C 34R
>> Thanks to all of the subscribers that contributed to the list to help with 
>> the costs involved.  If you want to show your support to the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - 
>> Stu
> 
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[ALAN BERGEN via CnC-List]

I have Sunbrella bags hanging below the instruments on either side of the
companionway. They've worked great for twenty years. See an example here:
https://www.sailrite.com/search?keywords=sheet%20bags

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR



On Sat, Aug 14, 2021 at 2:52 PM CHARLES SCHEAFFER via CnC-List <
cnc-list@cnc-list.com> wrote:

> Hey guys,
>
> What is everybody using for halyard bags for the lines next to the
> companionway and also sheet bags for the genoa sheets.  Anybody have
> suggestions?  Pictures?
>
> Chuck Scheaffer, Resolute 1989 C 34R
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --
> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!8fKiMO9VZiId-FUkHUF5azuMCRwaz0-RQHDvfvTpSxFHh2_f-IwfCzXuLzTiehFgZbc$
>  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Randal Stafford via CnC-List]

Hi Chuck,

I run the tails of my halyards and vang down the companionway, and coil each 
one on the cabin sole in such a way that it can run out freely when needed.  
The tail of my working genoa sheet is usually coiled on the cockpit bench.  The 
sheet length is such that the lazy sheet only has a couple feet of tail, 
usually wrapped around the winch ready for the next tack or gybe.  My mainsheet 
is coiled on the cockpit sole, and my traveler lines are coiled on the bench 
between the traveler and transom.  My spinnaker sheets when not in use are 
coiled on the side deck between cockpit coaming and stern pulpit.

Cheers,
Randy

> On Aug 14, 2021, at 3:51 PM, CHARLES SCHEAFFER via CnC-List 
>  wrote:
> 
> Hey guys,
>  
> What is everybody using for halyard bags for the lines next to the 
> companionway and also sheet bags for the genoa sheets.  Anybody have 
> suggestions?  Pictures?
>  
> Chuck Scheaffer, Resolute 1989 C 34R
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Don Kern via CnC-List]

Concur wish Josh.  Racing the halyards are drop straight down the 
companionway, less chance of tangle.  Cruising they are coiled and 
placed over their winches..


Don Kern
C Mk2
/Fireball,/ 12708
Bristol, RI

On 8/14/2021 6:33 PM, Josh Muckley via CnC-List wrote:
All the cabin top lines just get sent down the companionway.  They 
hang straight and stay relatively untangled.  The jib sheets are cut 
to length such that they only have a few feet of tail.  Never really 
have too much problem with just those 2 lines being staged on the 
cockpit floor or on the bench.  Any bag solutions I've ever seen or 
considered are just more trouble to load and unload and untangle.  I 
alway consider the potential need to dump a sail in an emergency.  A 
bag of spaghetti isn't helpful in that situation.  YMMV


Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD

On Sat, Aug 14, 2021, 17:52 CHARLES SCHEAFFER via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:


Hey guys,
What is everybody using for halyard bags for the lines next to the
companionway and also sheet bags for the genoa sheets.  Anybody
have suggestions?  Pictures?
Chuck Scheaffer, Resolute 1989 C 34R
Thanks to all of the subscribers that contributed to the list to
help with the costs involved.  If you want to show your support to
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray 
Thanks - Stu


Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu


Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Korbey Hunt via CnC-List]

Sunbrella bags with twist lock flaps that hang on the railings.

Get Outlook for Android

From: CHARLES SCHEAFFER via CnC-List 
Sent: Saturday, August 14, 2021 1:51:44 PM
To: CNC boat owners, cnc-list 
Cc: CHARLES SCHEAFFER 
Subject: Stus-List halyard/sheet bags

Hey guys,

What is everybody using for halyard bags for the lines next to the companionway 
and also sheet bags for the genoa sheets.  Anybody have suggestions?  Pictures?

Chuck Scheaffer, Resolute 1989 C 34R
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: halyard/sheet bags

[Josh Muckley via CnC-List]

All the cabin top lines just get sent down the companionway.  They hang
straight and stay relatively untangled.  The jib sheets are cut to length
such that they only have a few feet of tail.  Never really have too much
problem with just those 2 lines being staged on the cockpit floor or on the
bench.  Any bag solutions I've ever seen or considered are just more
trouble to load and unload and untangle.  I alway consider the potential
need to dump a sail in an emergency.  A bag of spaghetti isn't helpful in
that situation.  YMMV

Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD

On Sat, Aug 14, 2021, 17:52 CHARLES SCHEAFFER via CnC-List <
cnc-list@cnc-list.com> wrote:

> Hey guys,
>
> What is everybody using for halyard bags for the lines next to the
> companionway and also sheet bags for the genoa sheets.  Anybody have
> suggestions?  Pictures?
>
> Chuck Scheaffer, Resolute 1989 C 34R
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu