Re: Stus-List Replacement hinges 35mkIII

[Jim Watts via CnC-List]

Hi David

No, I'd rather keep it in case something happens to one of the ones I have.
Or if I need to change them all out again, then I'd only need to buy a
pair...

Jim

Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC

On 22 May 2017 at 10:56, David via CnC-List <cnc-list@cnc-list.com> wrote:

> Jim,
>
>
> Did you want to sell the extra?   I need just one.
>
>
> David F. Risch
> (401) 419-4650 (cell)
>
>
> --
> *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Indigo via
> CnC-List <cnc-list@cnc-list.com>
> *Sent:* Tuesday, May 16, 2017 9:40 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Indigo
> *Subject:* Re: Stus-List Replacement hinges 35mkIII
>
> The ones I got from Rex are chrome plated zinc alloy (0808DP0CHR)
>
> Can't recall how the hood side of the hinges are attached, but seem to
> remember that they were attached with nut and bolt, but seem to remember
> that nut just spun when I tried to replace a broken hinge in the past
> requiring removal of the hood. I plan to epoxy the nuts in place so broken
> hinges can be replaced more easily in the future!
>
> --
> Jonathan
> Indigo C 35III
> SOUTHPORT CT
>
> On May 15, 2017, at 21:02, Jim Watts via CnC-List <cnc-list@cnc-list.com>
> wrote:
>
> Yes, I still have one as a backup.
>
> That hinge stock number is actually 0951DP1CHR.
>
> Perko also makes the same hinge in zinc, which is what C used in the
> first place, at least on my boat. Part number for that is 0808DP0CHR.
>
> The zinc ones are way cheaper than the bronze ones, but will definitely
> decay faster in salt water. I went cheap, I can replace these about five
> times for the cost of the bronze ones.
>
> Jim Watts
> Paradigm Shift
> C 35 Mk III
> Victoria, BC
>
> On 15 May 2017 at 09:44, Indigo via CnC-List <cnc-list@cnc-list.com>
> wrote:
>
>> Thanks for this. I contacted Perko and they were able to give me the
>> exact dimensions / hole placements etc and gave me a part number
>> (0851DP1CHR). Found it a local, well stocked marine store shout out to Rex
>> Marine in Norwalk CT!  - NOT West! and confirmed by comparing old to New
>> that is the same!  Only downside is that they come two to a pack and I need
>> 3!!
>>
>> --
>> Jonathan
>> Indigo C 35III
>> SOUTHPORT CT
>>
>>
> ___
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>
>
> ___
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>
>
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Replacement hinges 35mkIII

[David via CnC-List]

Jim,


Did you want to sell the extra?   I need just one.


David F. Risch
(401) 419-4650 (cell)



From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Indigo via CnC-List 
<cnc-list@cnc-list.com>
Sent: Tuesday, May 16, 2017 9:40 AM
To: cnc-list@cnc-list.com
Cc: Indigo
Subject: Re: Stus-List Replacement hinges 35mkIII

The ones I got from Rex are chrome plated zinc alloy (0808DP0CHR)

Can't recall how the hood side of the hinges are attached, but seem to remember 
that they were attached with nut and bolt, but seem to remember that nut just 
spun when I tried to replace a broken hinge in the past requiring removal of 
the hood. I plan to epoxy the nuts in place so broken hinges can be replaced 
more easily in the future!

--
Jonathan
Indigo C 35III
SOUTHPORT CT

On May 15, 2017, at 21:02, Jim Watts via CnC-List 
<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote:

Yes, I still have one as a backup.

That hinge stock number is actually 0951DP1CHR.

Perko also makes the same hinge in zinc, which is what C used in the first 
place, at least on my boat. Part number for that is 0808DP0CHR.

The zinc ones are way cheaper than the bronze ones, but will definitely decay 
faster in salt water. I went cheap, I can replace these about five times for 
the cost of the bronze ones.

Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC

On 15 May 2017 at 09:44, Indigo via CnC-List 
<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote:
Thanks for this. I contacted Perko and they were able to give me the exact 
dimensions / hole placements etc and gave me a part number (0851DP1CHR). Found 
it a local, well stocked marine store shout out to Rex Marine in Norwalk CT!  - 
NOT West! and confirmed by comparing old to New that is the same!  Only 
downside is that they come two to a pack and I need 3!!

--
Jonathan
Indigo C 35III
SOUTHPORT CT


___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Replacement hinges 35mkIII

[Indigo via CnC-List]

The ones I got from Rex are chrome plated zinc alloy (0808DP0CHR)

Can't recall how the hood side of the hinges are attached, but seem to remember 
that they were attached with nut and bolt, but seem to remember that nut just 
spun when I tried to replace a broken hinge in the past requiring removal of 
the hood. I plan to epoxy the nuts in place so broken hinges can be replaced 
more easily in the future!

--
Jonathan
Indigo C 35III
SOUTHPORT CT

> On May 15, 2017, at 21:02, Jim Watts via CnC-List  
> wrote:
> 
> Yes, I still have one as a backup. 
>  
> That hinge stock number is actually 0951DP1CHR.
> 
> Perko also makes the same hinge in zinc, which is what C used in the first 
> place, at least on my boat. Part number for that is 0808DP0CHR.
> 
> The zinc ones are way cheaper than the bronze ones, but will definitely decay 
> faster in salt water. I went cheap, I can replace these about five times for 
> the cost of the bronze ones. 
> 
> Jim Watts
> Paradigm Shift
> C 35 Mk III
> Victoria, BC
> 
>> On 15 May 2017 at 09:44, Indigo via CnC-List  wrote:
>> Thanks for this. I contacted Perko and they were able to give me the exact 
>> dimensions / hole placements etc and gave me a part number (0851DP1CHR). 
>> Found it a local, well stocked marine store shout out to Rex Marine in 
>> Norwalk CT!  - NOT West! and confirmed by comparing old to New that is the 
>> same!  Only downside is that they come two to a pack and I need 3!!
>> 
>> --
>> Jonathan
>> Indigo C 35III
>> SOUTHPORT CT
>> 
> 
> ___
> 
> This list is supported by the generous donations of our members. If you wish 
> to make a contribution to offset our costs, please go to:  
> https://www.paypal.me/stumurray
> 
> All Contributions are greatly appreciated!
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Replacement hinges 35mkIII

[Jim Watts via CnC-List]

Yes, I still have one as a backup.

That hinge stock number is actually 0951DP1CHR.

Perko also makes the same hinge in zinc, which is what C used in the
first place, at least on my boat. Part number for that is 0808DP0CHR.

The zinc ones are way cheaper than the bronze ones, but will definitely
decay faster in salt water. I went cheap, I can replace these about five
times for the cost of the bronze ones.

Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC

On 15 May 2017 at 09:44, Indigo via CnC-List  wrote:

> Thanks for this. I contacted Perko and they were able to give me the exact
> dimensions / hole placements etc and gave me a part number (0851DP1CHR).
> Found it a local, well stocked marine store shout out to Rex Marine in
> Norwalk CT!  - NOT West! and confirmed by comparing old to New that is the
> same!  Only downside is that they come two to a pack and I need 3!!
>
> --
> Jonathan
> Indigo C 35III
> SOUTHPORT CT
>
>
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Replacement hinges 35mkIII

[Indigo via CnC-List]

Thanks for this. I contacted Perko and they were able to give me the exact 
dimensions / hole placements etc and gave me a part number (0851DP1CHR). Found 
it a local, well stocked marine store shout out to Rex Marine in Norwalk CT!  - 
NOT West! and confirmed by comparing old to New that is the same!  Only 
downside is that they come two to a pack and I need 3!!

--
Jonathan
Indigo C 35III
SOUTHPORT CT

> On May 15, 2017, at 09:05, Dennis C. via CnC-List  
> wrote:
> 
> http://www.perko.com/catalog/category_products/cabinet_hardware-hinges/
> 
>> On Mon, May 15, 2017 at 7:57 AM, Indigo via CnC-List  
>> wrote:
>> Has anyone with a 35mkIII replaced the three hinges that are attached to the 
>> plexiglass cover for the winch handle (?) tray that is just forward of the 
>> main hatch. I have the hinges off the boat, and though they are stamped 
>> Perko Zinc there is no serial / model number. What I thought were 
>> equivalents from West Marine do not have the same hole pattern and thus do 
>> not line up with the holes in the fibreglass or the plexi. I would rather 
>> not have to replace the plexi just because of the hinges.  If anyone has the 
>> model number of the original Perko hinges, I would be most grateful.
>> 
>> --
>> Jonathan
>> Indigo C 35III
>> SOUTHPORT CT
>> 
>> ___
>> 
>> This list is supported by the generous donations of our members. If you wish 
>> to make a contribution to offset our costs, please go to:  
>> https://www.paypal.me/stumurray
>> 
>> All Contributions are greatly appreciated!
> 
> ___
> 
> This list is supported by the generous donations of our members. If you wish 
> to make a contribution to offset our costs, please go to:  
> https://www.paypal.me/stumurray
> 
> All Contributions are greatly appreciated!
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Replacement hinges 35mkIII

[Joel Aronson via CnC-List]

I did.  Sea Dog makes 2 sizes that are off by about an 1/8 of an inch.  It
was the smaller ones.  I think one was 2 1/8 overall and one was 2 1/4, but
that was a few years back.
(so that is what that compartment is for!)

Joel
Former 35/3

On Mon, May 15, 2017 at 8:57 AM, Indigo via CnC-List 
wrote:

> Has anyone with a 35mkIII replaced the three hinges that are attached to
> the plexiglass cover for the winch handle (?) tray that is just forward of
> the main hatch. I have the hinges off the boat, and though they are stamped
> Perko Zinc there is no serial / model number. What I thought were
> equivalents from West Marine do not have the same hole pattern and thus do
> not line up with the holes in the fibreglass or the plexi. I would rather
> not have to replace the plexi just because of the hinges.  If anyone has
> the model number of the original Perko hinges, I would be most grateful.
>
> --
> Jonathan
> Indigo C 35III
> SOUTHPORT CT
>
> ___
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>



-- 
Joel
301 541 8551
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Replacement hinges 35mkIII

[Dennis C. via CnC-List]

http://www.perko.com/catalog/category_products/cabinet_hardware-hinges/

On Mon, May 15, 2017 at 7:57 AM, Indigo via CnC-List 
wrote:

> Has anyone with a 35mkIII replaced the three hinges that are attached to
> the plexiglass cover for the winch handle (?) tray that is just forward of
> the main hatch. I have the hinges off the boat, and though they are stamped
> Perko Zinc there is no serial / model number. What I thought were
> equivalents from West Marine do not have the same hole pattern and thus do
> not line up with the holes in the fibreglass or the plexi. I would rather
> not have to replace the plexi just because of the hinges.  If anyone has
> the model number of the original Perko hinges, I would be most grateful.
>
> --
> Jonathan
> Indigo C 35III
> SOUTHPORT CT
>
> ___
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Stus-List Replacement hinges 35mkIII

[Indigo via CnC-List]

Has anyone with a 35mkIII replaced the three hinges that are attached to the 
plexiglass cover for the winch handle (?) tray that is just forward of the main 
hatch. I have the hinges off the boat, and though they are stamped Perko Zinc 
there is no serial / model number. What I thought were equivalents from West 
Marine do not have the same hole pattern and thus do not line up with the holes 
in the fibreglass or the plexi. I would rather not have to replace the plexi 
just because of the hinges.  If anyone has the model number of the original 
Perko hinges, I would be most grateful. 

--
Jonathan
Indigo C 35III
SOUTHPORT CT

___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!