Re: Stus-List Spinnaker Pole for 33 MK II
I recently bought a whisker pole on Craigslist and saw a number of spinnaker poles at the same time. If you use SearchTempest you can search the whole country at once. I have found that there seem to be spikes in availability of poles. At some times you find none and then other times lots. I would be patient and keep searching. Dave On Mar 6, 2015, at 3:59 PM, Frederick G Street via CnC-List cnc-list@cnc-list.com wrote: Tom — I’ve got a fixed spin pole for my LF38 that I will never use; but it’s going to be a bit long for your boat. Maybe you could cut down the tubing and reattach the end fittings? I’d let it go at a reasonable price, as I’d like funds for a whisker pole instead. And it would definitely be close by for you… :^) Fred Street -- Minneapolis S/V Oceanis (1979 CC Landfall 38) -- on the hard in Bayfield, WI :^( On Mar 6, 2015, at 2:43 PM, Tom Lynch via CnC-List cnc-list@cnc-list.com wrote: I acquired a 1985 CC 33 MKII mid last summer. I need to replace the spinnaker pole. Does anyone have any suggestions on where I can find a used spinnaker pole or a good price on a new one? I've checked ebay and found a few items but not much. Thanks Tom Escape (to be renamed) 1985 CC 33 II Bayfield WI. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com Dr. David Knecht Professor of Molecular and Cell Biology Core Microscopy Facility Director University of Connecticut 91 N. Eagleville Rd. Storrs, CT 06269 860-486-2200 ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Stus-List Spinnaker Pole for 33 MK II
I acquired a 1985 CC 33 MKII mid last summer. I need to replace the spinnaker pole. Does anyone have any suggestions on where I can find a used spinnaker pole or a good price on a new one? I've checked ebay and found a few items but not much. Thanks Tom *Escape* (to be renamed) 1985 CC 33 II Bayfield WI. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Spinnaker Pole for 33 MK II
Try the local boat yards--especially if they service sailboats. The sometimes have odd bits sitting around. As for ebay, unless it is local, the shipping will be freight which is not cheap. Eric CC 34/36 On Fri, Mar 6, 2015 at 3:43 PM, Tom Lynch via CnC-List cnc-list@cnc-list.com wrote: I acquired a 1985 CC 33 MKII mid last summer. I need to replace the spinnaker pole. Does anyone have any suggestions on where I can find a used spinnaker pole or a good price on a new one? I've checked ebay and found a few items but not much. Thanks Tom *Escape* (to be renamed) 1985 CC 33 II Bayfield WI. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Spinnaker Pole for 33 MK II
Tom — I’ve got a fixed spin pole for my LF38 that I will never use; but it’s going to be a bit long for your boat. Maybe you could cut down the tubing and reattach the end fittings? I’d let it go at a reasonable price, as I’d like funds for a whisker pole instead. And it would definitely be close by for you… :^) Fred Street -- Minneapolis S/V Oceanis (1979 CC Landfall 38) -- on the hard in Bayfield, WI :^( On Mar 6, 2015, at 2:43 PM, Tom Lynch via CnC-List cnc-list@cnc-list.com wrote: I acquired a 1985 CC 33 MKII mid last summer. I need to replace the spinnaker pole. Does anyone have any suggestions on where I can find a used spinnaker pole or a good price on a new one? I've checked ebay and found a few items but not much. Thanks Tom Escape (to be renamed) 1985 CC 33 II Bayfield WI. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Spinnaker Pole for 33 MK II
If it were me...and assuming you have the pole ends...you might try sourcing carbon fibre tubing.so much easier to handle than the old tech. I still lug around the old tech and lust for a CF pole David F. Risch. 1981 40 Please excuse brevity and possible typos...sent from my mobile device. div Original message /divdivFrom: Eric Baumes via CnC-List cnc-list@cnc-list.com /divdivDate:03/06/2015 3:54 PM (GMT-05:00) /divdivTo: Tom Lynch thomasmly...@gmail.com, cnc-list cnc-list@cnc-list.com /divdivSubject: Re: Stus-List Spinnaker Pole for 33 MK II /divdiv /div Try the local boat yards--especially if they service sailboats. The sometimes have odd bits sitting around. As for ebay, unless it is local, the shipping will be freight which is not cheap. Eric CC 34/36 On Fri, Mar 6, 2015 at 3:43 PM, Tom Lynch via CnC-List cnc-list@cnc-list.com wrote: I acquired a 1985 CC 33 MKII mid last summer. I need to replace the spinnaker pole. Does anyone have any suggestions on where I can find a used spinnaker pole or a good price on a new one? I've checked ebay and found a few items but not much. Thanks Tom *Escape* (to be renamed) 1985 CC 33 II Bayfield WI. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
