Re: Stus-List vang, CC 35 Mk II
Ham and cheese works especially well… Rich Knowles Nanaimo, BC Boatless! On Aug 23, 2015, at 10:18, Lee Youngblood via CnC-List cnc-list@cnc-list.com wrote: Just use a snack block to your toe-rail when you ned a little down-wing vang. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List vang, CC 35 Mk II
Jon, Are you sure your's is a mk III. It seems like a really really early build... :) At 10:04 AM 23/08/2015, you wrote: I have a CC 35 ml III built in 1883. Are you sure yours is a MK II ? May make a difference on the advice you get back from the group. -- Jonathan Indigo CC 35III SOUTHPORT CT On Aug 23, 2015, at 09:52, Richard H. Bernstein via CnC-List cnc-list@cnc-list.com wrote: I am attaching a (Block and line) vang to our 1984 CC35, but the housing for the swing keel turning block is in the way at the mast base. I'm wondering how others have dealt with this problem. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List vang, CC 35 Mk II
Oops! 1983 of course!! These fingers make too many typos on an iPhone keyboard! -- Jonathan Indigo CC 35III SOUTHPORT CT On Aug 23, 2015, at 13:24, Russ Melody via CnC-List cnc-list@cnc-list.com wrote: Jon, Are you sure your's is a mk III. It seems like a really really early build... :) At 10:04 AM 23/08/2015, you wrote: I have a CC 35 ml III built in 1883. Are you sure yours is a MK II ? May make a difference on the advice you get back from the group. -- Jonathan Indigo CC 35III SOUTHPORT CT On Aug 23, 2015, at 09:52, Richard H. Bernstein via CnC-List cnc-list@cnc-list.com wrote: I am attaching a (Block and line) vang to our 1984 CC35, but the housing for the swing keel turning block is in the way at the mast base. I'm wondering how others have dealt with this problem. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List vang, CC 35 Mk II
Hi Richard, Just use a snack block to your toe-rail when you ned a little down-wing vang. Save your money and buy a good hard-vang that will likely attach to the mast above those blocks The hard-vang will save you all the grief of the topping lift - a real quality of life improvement. Or, you might just use a couple spectra loops, to create a attachment point high enough to clear. http://www.rei.com/product/751699/black-diamond-10mm-dynex-runner Cheers, Lee s/v Simplicity 1974 CC 35-II Seattle On Aug 23, 2015, at 6:52 AM, Richard H. Bernstein via CnC-List cnc-list@cnc-list.com wrote: I am attaching a (Block and line) vang to our 1984 CC35, but the housing for the swing keel turning block is in the way at the mast base. I'm wondering how others have dealt with this problem. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List vang, CC 35 Mk II
I have a CC 35 ml III built in 1883. Are you sure yours is a MK II ? May make a difference on the advice you get back from the group. -- Jonathan Indigo CC 35III SOUTHPORT CT On Aug 23, 2015, at 09:52, Richard H. Bernstein via CnC-List cnc-list@cnc-list.com wrote: I am attaching a (Block and line) vang to our 1984 CC35, but the housing for the swing keel turning block is in the way at the mast base. I'm wondering how others have dealt with this problem. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Stus-List vang, CC 35 Mk II
I am attaching a (Block and line) vang to our 1984 CC35, but the housing for the swing keel turning block is in the way at the mast base. I'm wondering how others have dealt with this problem. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
