[codenameone-discussions] Re: Setting the size of the new CEF BrowserComponent programmatically
I don't understand why you need more that a border layout for this. Just create a border layout to the form. Place the browser component in the center and then place what you want in the east/west and south. You can easily add anything you want there and it will take just the right amount necessary. On Wednesday, August 12, 2020 at 1:41:00 PM UTC+3 P5music wrote: > I have to recall that those setting methods have no effect when the BC is > in the BoxLayout.y(), so by your suggestion I introduced the BorderLayout > in the layout. > My layout is very simple. > A table layout is on the screen (main form) and on the right there is the > detail cell with the right size percentage. > In the detail part there is a vertical container, with some areas, and the > BC has just to be the last component, but its size is not set correctly. > The only possibility is to use BorderLayout and put it in the center, so > it expands. > Said that, I need to set vertical size, because some empty space should > preferably remain. > Is this possible, being that the setting methods have no effect? > It is a design preference, I could also drop. > > Il giorno mercoledì 12 agosto 2020 03:59:52 UTC+2, Shai Almog ha scritto: >> >> The size of the browser component must be deterministic. That means If >> you place the hierarchy or the browser component in NORTH it will size it >> based on preferred size which is 0 and that won't end up well. >> >> If your layout is more complex than those two options you'd either need >> to explicitly invoke setPreferredSize() (no the browser component) or >> simplify the layout. >> >> On Tuesday, August 11, 2020 at 11:36:32 AM UTC+3 P5music wrote: >> >>> My layout is more complex than a BC in a Table layout. The "detail" part >>> on the right features that BC but it is not the only control, some space >>> are used NORTH for other controls, and some space has to remain empty >>> SOUTH, even if I had to put the BC in the center of a BorderLayout. I >>> accomplished your suggestions, but the point was the BC was tiny. I used >>> the Containers as you said but in a more complex way, combinating them one >>> inside the other. >>> Now I need that the BC has a certain height, it was my original goal. I >>> cannot set the TL cell height because the BC is not the entire cell, maybe >>> I did not understand what you mean. >>> Thanks in advance >>> >>> >>> Il giorno martedì 11 agosto 2020 03:55:50 UTC+2, Shai Almog ha scritto: If it's in the center it takes up the whole set of available space. You can see this using the component inspector tool. I explained to you in your previous post how you can use TableLayout with BrowserComponent. You just need to disable form scrolling and make sure to define a height/width constraint to the cell. On Monday, August 10, 2020 at 12:12:03 PM UTC+3 P5music wrote: > I am using the new CEF BrowserComponent. > I put it inside a BorderLayout, at the center, so it takes the space > according to the content (the surrounding form/container have been set > correctly to allow this layout to happen). > I need to set the height to a certain size, like 200px, or 4 lines of > text, for example. > If I set the page to an HTML string with text inside, I see the text > and no scrollbars (that instead appear in other cases), so it seems that > the size is not as tall as the remaining space. It is good for my layout > but I need to set the height exactly before there is text inside, and It > has not to resize automatically. > The setHeight method does not work, not even after the onload event. > Thanks in advance > > > -- You received this message because you are subscribed to the Google Groups "CodenameOne Discussions" group. To unsubscribe from this group and stop receiving emails from it, send an email to codenameone-discussions+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/codenameone-discussions/392dcca9-b94b-4b81-ae52-822ad7e69471n%40googlegroups.com.
[codenameone-discussions] Re: Setting the size of the new CEF BrowserComponent programmatically
I have to recall that those setting methods have no effect when the BC is in the BoxLayout.y(), so by your suggestion I introduced the BorderLayout in the layout. My layout is very simple. A table layout is on the screen (main form) and on the right there is the detail cell with the right size percentage. In the detail part there is a vertical container, with some areas, and the BC has just to be the last component, but its size is not set correctly. The only possibility is to use BorderLayout and put it in the center, so it expands. Said that, I need to set vertical size, because some empty space should preferably remain. Is this possible, being that the setting methods have no effect? It is a design preference, I could also drop. Il giorno mercoledì 12 agosto 2020 03:59:52 UTC+2, Shai Almog ha scritto: > > The size of the browser component must be deterministic. That means If you > place the hierarchy or the browser component in NORTH it will size it based > on preferred size which is 0 and that won't end up well. > > If your layout is more complex than those two options you'd either need to > explicitly invoke setPreferredSize() (no the browser component) or simplify > the layout. > > On Tuesday, August 11, 2020 at 11:36:32 AM UTC+3 P5music wrote: > >> My layout is more complex than a BC in a Table layout. The "detail" part >> on the right features that BC but it is not the only control, some space >> are used NORTH for other controls, and some space has to remain empty >> SOUTH, even if I had to put the BC in the center of a BorderLayout. I >> accomplished your suggestions, but the point was the BC was tiny. I used >> the Containers as you said but in a more complex way, combinating them one >> inside the other. >> Now I need that the BC has a certain height, it was my original goal. I >> cannot set the TL cell height because the BC is not the entire cell, maybe >> I did not understand what you mean. >> Thanks in advance >> >> >> Il giorno martedì 11 agosto 2020 03:55:50 UTC+2, Shai Almog ha scritto: >>> >>> If it's in the center it takes up the whole set of available space. You >>> can see this using the component inspector tool. >>> I explained to you in your previous post how you can use TableLayout >>> with BrowserComponent. You just need to disable form scrolling and make >>> sure to define a height/width constraint to the cell. >>> >>> On Monday, August 10, 2020 at 12:12:03 PM UTC+3 P5music wrote: >>> I am using the new CEF BrowserComponent. I put it inside a BorderLayout, at the center, so it takes the space according to the content (the surrounding form/container have been set correctly to allow this layout to happen). I need to set the height to a certain size, like 200px, or 4 lines of text, for example. If I set the page to an HTML string with text inside, I see the text and no scrollbars (that instead appear in other cases), so it seems that the size is not as tall as the remaining space. It is good for my layout but I need to set the height exactly before there is text inside, and It has not to resize automatically. The setHeight method does not work, not even after the onload event. Thanks in advance -- You received this message because you are subscribed to the Google Groups "CodenameOne Discussions" group. To unsubscribe from this group and stop receiving emails from it, send an email to codenameone-discussions+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/codenameone-discussions/43f57183-5dc9-4c60-a841-8392078df8fco%40googlegroups.com.
[codenameone-discussions] Re: CTRL key deletes words in CEF BrowserComponent with text editing
Issue https://github.com/codenameone/CodenameOne/issues/3218 Il giorno mercoledì 12 agosto 2020 04:00:43 UTC+2, Shai Almog ha scritto: > > Can you please file an issue with a simple test case/platform etc? > > On Tuesday, August 11, 2020 at 11:41:05 AM UTC+3 P5music wrote: > >> It does happen also with a normal google page, in the search text field. >> In Chrome I do not see anything useful to debug. >> Regards >> >> Il giorno martedì 11 agosto 2020 03:57:43 UTC+2, Shai Almog ha scritto: >>> >>> Does this happen for a generic website? E.g. if you open Google.com? >>> Do you see something while debugging on chrome? >>> >>> On Monday, August 10, 2020 at 9:14:01 PM UTC+3 P5music wrote: >>> My app has a BrowserComponent as a mean for the user to edit some text. I am testing the new CEF BrowserComponent. I noticed that when I enter the field to edit the text (there is some default text) and press just the CTRL key, a word disappears. If I press it again another word disappears. Maybe this is a bug, I do not know. Thanks in advance >>> -- You received this message because you are subscribed to the Google Groups "CodenameOne Discussions" group. To unsubscribe from this group and stop receiving emails from it, send an email to codenameone-discussions+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/codenameone-discussions/68e1a379-9545-4b3f-bd7f-fd39d48fbe45o%40googlegroups.com.
[codenameone-discussions] Re: CEF BrowserComponent (simulator) does not always update immediately after inserting images in text with Javascript.
Issue https://github.com/codenameone/CodenameOne/issues/3219 Il giorno mercoledì 12 agosto 2020 03:56:04 UTC+2, Shai Almog ha scritto: > > Can you file an issue on this? > I'm not sure if we can fix this directly since we need a reproducible test > case but I'm guessing other issues will include those. Once we fix those > issues I'd like this to be in the tracker so we can verify this was fixed. > If not we'll need to go over that. > > On Tuesday, August 11, 2020 at 11:29:23 AM UTC+3 P5music wrote: > >> I do not see any message in the devtools console. But it is possible I am >> not using it correctly. >> In the attached images you can see what's in Chrome. >> The depicted screen is the BrowserComponent. It does not resemble what I >> have on my layout, that is, a BC with text inside as usual. When inserting >> the image, regardless it is the case that it appears or not in the BC, a >> blue rectangle appears in the above mentioned screen, then if I click again >> on the BC the rectangle becomes gray, then next time it disappears. >> Notice that when the image is correctly inserted in the DOM it is >> highlighted in blue first, then it becomes normal. >> >> >> Il giorno martedì 11 agosto 2020 03:59:26 UTC+2, Shai Almog ha scritto: >>> >>> Odd. It might be a refresh problem. I'm assuming there's nothing obvious >>> in the JavaScript console. Right? >>> >>> On Monday, August 10, 2020 at 9:28:07 PM UTC+3 P5music wrote: >>> I think this could be an issue for the CEF BrowserComponent so I report it. My app has this BrowserComponent for text editing. There is some functionality that encompasses creating an image in text, at certain offset. I can easily do that but the BC behaviour changes accordingly to the offset or sometimes in erratic fashion. Here's what happens. When the offset is 0 or the last position the image does not appear just after inserting in the DOM as expected, instead I have to enter the editing field again to see it (and the size of the BC changes at this time, not before, so it is updated at this time and not before). This happens every time for those offset positions, but sometimes it happens in intermediate positions. No matter whether I call focus() or other methods on the element (in Javascript), or other workarounds, the behaviour is solid, like it is an issue. Thanks in advance >>> -- You received this message because you are subscribed to the Google Groups "CodenameOne Discussions" group. To unsubscribe from this group and stop receiving emails from it, send an email to codenameone-discussions+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/codenameone-discussions/1bf25bad-ec45-4bcb-9ea9-5f3ada117f32o%40googlegroups.com.